Recoverable Palladium Catalysts for Suzuki–Miyaura Cross‐ Coupling Reactions Based on Organic‐Inorganic Hybrid Silica Materials Containing Imidazolium and Dihydroimidazolium Salts

The systems formed by palladium acetate [Pd(OAc)₂] and hybrid silica materials prepared by sol‐gel from monosilylated imidazolium and disilylated dihydroimidazolium salts show catalytic activity in Suzuki–Miyaura cross‐couplings with challenging aryl bromides and chlorides. They are very efficient as recoverable catalysts with aryl bromides. Recycling is also possible with aryl chlorides, although with lower conversions. In situ formation of palladium nanoparticles has been observed in recycling experiments.     

Palladium‐Catalysed Intramolecular Direct Arylation of 2‐Bromobenzenesulfonic Acid Derivatives

A palladium‐catalysed intramolecular direct arylation of 2‐bromobenzenesulfonic acid derivatives was found to proceed using 1 mol% of palladium acetate as the catalyst. The influence of the substituents on the phenol moiety of 2‐bromobenzenesulfonic acid phenyl esters reveals that electron‐donating substituents favour the reaction while electron‐withdrawing ones are unfavourable. The reactivity of sulfonamides was also studied and, in all cases, a selective activation at sp² C H vs. sp³ C H was observed. A sulfonamide bearing both phenyl and benzyl substituents on nitrogen gave selectively the six‐membered ring product.     

Preparation and drug release behaviors of 5‐fluorouracil loaded poly(glycolide‐co‐lactide‐co‐caprolactone) nanoparticles

5‐Fluorouracil (5‐Fu) loaded poly(glycolide‐co‐lactide‐co‐caprolactone) (PGLC) nanoparticles were prepared by modified spontaneous emulsification solvent diffusion method (modified‐SESD method) and characterized by dynamic light scattering, scanning electron microscopy and ¹H NMR determination. It was found that the obtained nanoparticles showed near spherical shape and was controllable with the radius range of 30–100 nm. Compared with the nanoparticles prepared by polylactide and poly (lactide‐co‐glycolide) (PLGA) under the similar preparation condition, yield of PGLC nanoparticles was the highest, which reached to about 100%. On the other hand, drug entrapment efficiency of PGLC nanoparticles was also higher than that of PLGA and PLLA nanoparticles. 5‐Fu release behavior of PGLC nanoparticles in vitro showed that 5‐Fu release of PGLC nanoparticles showed a near zero‐order release profile, and 5‐Fu release rate of PGLC nanoparticles was faster than that of PLLA and PLGA nanoparticles. According to degradation behavior of PGLC nanoparticles, it could be proposed that the kinetic of degradation controlled release played an important role in the release process of PGLC nanoparticles. It revealed that the PGLC nanoparticles could be a promising drug carrier. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2007     

Biphasic Hydrogenation of Olefins by Functionalized Ionic Liquid‐Stabilized Palladium Nanoparticles

Palladium nanoparticles in the size range of 5–6 nm were prepared conveniently by reducing palladium(II) with atmospheric pressure hydrogen and stabilized by 2,2′‐dipyridylamine‐functionalized imidazolium cations according to our approach. The efficient catalytic conversion of cyclohexene into cyclohexane by the functionalized ionic liquid‐stabilized palladium nanoparticles has been performed under very mild hydrogen pressure (0.1 MPa) and at 35 °C. It was found that the concentration of palladium and the reaction temperature considerably affected the size and degree of aggregation of Pd nanoparticles in ionic liquid, which further changed the performance of the catalyst activity. The synthesized nanocatalysts can be recycled at least five times without any loss of the activity. Finally, the scope of substrates was also investigated. The excellent catalytic activity of the present system can be attributed to good stabilization and high dispersion of palladium nanoparticles.     

Preparation and characterization of poly{[α‐maleic anhydride‐ω‐methoxy‐poly(ethylene glycol)]‐co‐(ethyl cyanoacrylate)} copolymer nanoparticles

Poly{[α‐maleic anhydride‐ω‐methoxy‐poly(ethylene glycol)]‐co‐(ethyl cyanoacrylate)} (PEGECA) copolymers were prepared by radical polymerization of macromolecular poly(ethylene glycol) monomers (PEGylated) and ethyl 2‐cyanoacrylate in solvent. The structures of the copolymer were characterized by Fourier‐transform infrared (FTIR) and proton nuclear magnetic resonance (¹H‐NMR). The morphology and size of the PEGECA nanoparticles prepared by nanoprecipitation techniques were investigated by transmission electron microscopy (TEM) and photon correlation spectroscopy (PCS) methods. The results show that the PEGECA can self‐assemble into highly stable nanoparticles in aqueous media, and inner core and outer shell morphology. The size of the nanoparticles was strongly influenced by the solvent character and the copolymer concentration in the organic solvents. A hydrophobic drug, ibuprofen, was effectively incorporated into the nanoparticles, which provides a delivery system for ibuprofen and other hydrophobic compounds. Copyright © 2005 Society of Chemical Industry     

Polypyrrole‐wrapped Pd nanoparticles hollow capsules as a catalyst for reduction of 4‐nitroaniline

In this study, by in situ reduction of Pd²⁺ ions attached on the surface of the sulfonated polystyrene (PS‐SO₃H) spheres, complete and dense palladium (Pd) nanoparticles (NPs) layer were deposited around PS‐SO₃H spheres. The PS@Pd spheres were wrapped by polypyrrole (PPy) shell, which could avoid escaping of Pd NPs. After selectively etching the PS core, the hollow structures with Pd NPs embedded in PPy capsule shell were obtained. The as‐prepared Pd@PPy hollow capsules showed excellent catalytic activity toward the reduction of 4‐nitroaniline because of the high Pd NPs loading. Furthermore, good reusabilty was demonstrated seven times without any detectible loss in activity. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43933.     

Random copolymerization of 2,2‐dimethyltri methylene carbonate and ε‐caprolactone using a rare‐earth tris(4‐tert‐butylphenolate)s as a single‐component initiator

Highly random copolymers of 2,2‐dimethyltrimethylene carbonate (DTC) and ε‐caprolactone (CL) were synthesized by single component rare‐earth tris(4‐tert‐butylphenolate)s [Ln(OTBP)₃] for the first time. The influences of reaction conditions on the copolymerization initiated by La(OTBP)₃ have been examined in detail. The monomer reactivity ratios of DTC and CL determined by the Fineman–Ross method are 4.0 for r_DTC and 0.27 for r_CL. The microstructure of the copolymer was determined by the analyses of the diads DTC–DTC, DTC–CL, CL–DTC and CL–CL of the ¹H NMR spectra. The high degree of randomness of the chain structure was further confirmed by the ¹³C NMR spectra and differential scanning calorimetry. The thermal properties of the copolymers as a function of composition are reported. The mechanism investigated by ¹H NMR data indicates that the rare‐earth tris(4‐tert‐butylphenolate)s initiate the ring‐opening copolymerization of DTC and CL with acyl‐oxygen bond cleavages of the monomers. Copyright © 2004 Society of Chemical Industry     

Methoxy poly(ethylene glycol)‐block‐poly(D,L‐lactic acid) copolymer nanoparticles as carriers for transdermal drug delivery

This work evaluates the transdermal drug delivery properties of amphiphilic copolymer self‐assembled nanoparticles by skin penetration experiments in vitro. Paclitaxel‐loaded methoxy poly(ethylene glycol)‐block‐poly(D ,L ‐lactic acid) diblock copolymer nanoparticles (PNPs) were prepared by a solid dispersion technique and were applied to the surface of excised full‐thickness rat skin in Franz diffusion cells. HPLC, transmission electron microscopy, Fourier transform infrared spectroscopy and ¹H NMR were used to assay the receptor fluid. The results show that the amphiphilic copolymer nanoparticles with the entrapped paclitaxel are able to penetrate rat skin. Ethanol can improve the delivery of PNPs and increase the cumulative amount of paclitaxel in the receptor fluid by 3 times. Fluorescence microscopy measurements indicate that the PNPs can penetrate the skin not only via appendage routes including sweat ducts and hair follicles but also via epidermal routes. Copyright © 2007 Society of Chemical Industry     

Synthesis and Surface Active Properties of tri[(N‐alkyl‐N‐ethyl‐N‐Sodium carboxymethyl)‐2‐Ammonium bromide ethylene] Amines

Trimeric betaine surfactants tri[(N‐alkyl‐N‐ethyl‐N‐sodium carboxymethyl)‐2‐ammonium bromide ethylene] amines were prepared with raw materials containing tris(2‐aminoethyl) amine, alkyloyl chloride, lithium aluminium hydride, sodium chloroacetate, and bromoethane by alkylation, Hoffman degradation reaction, carboxymethylation and quaternary amination reaction. The chemical structures of the prepared compounds were confirmed by FTIR, ¹H NMR, MS and elemental analysis. With the increasing length of the carbon chain, the values of their critical micelle concentration initially decreased. Surface active properties of these compounds were superior to general carboxylate surfactants C₁₀H₂₁CHN⁺(CH₃)₂COONa. The minimum cross‐sectional area per surfactant molecule (A_min), standard Gibbs free energy adsorption (ΔG_ads) and standard Gibbs free energy micellization (ΔG_mic) are notably influenced by the chain length n, and the trimeric betaine surfactants have greater ability to adsorb at the air/water interface than form micelles in solution. The efficiency of adsorption at the water/air interface (pC₂₀) of these surfactants increased with the increasing length of the alkyl chain. Their foaming properties, wetting ability of a felt chip, and lime‐soap dispersing ability were also investigated.     

Preparation and fluorescence properties of poly(o‐methyl‐acrylamideyl‐benzoic acid)‐ZnS composites

Poly(o‐methyl‐acrylamideyl‐benzoic acid)‐ZnS (P(o‐MAABA)‐ZnS) nanocomposites have been prepared and characterized. The resultant P(o‐MAABA)‐ZnS nanocomposites in solution show two emissions in the purple‐light area (370 nm) and in the blue‐light area (425 nm), which are assigned to the polymer and ZnS nanoparticles, respectively. The coordination between the polymer and Zn²⁺ and the surface chemical composition has been studied by Infrared spectroscopy and X‐ray photoelectron spectroscopy (XPS). The particle size of ZnS nanoparticles was homogeneous and the average size was 3.8 nm, which were characterized by UV absorption spectrum and X‐ray Diffraction. The P(o‐MAABA)‐ZnS composites displays good film formability and the films also show two emissions in 370 and 425 nm. After doped with Tb³⁺, there was effective energy transfer from ZnS nanoparticles to Tb³⁺. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Semiconductive poly[N1,N4‐bis(thiophen‐2‐ylmethylene)benzene‐1,4‐diamine]‐nickel oxide nanocomposite based ethanol sensor

This study aims to use the conductivity of a synthetic polymer as the sensing probe for ethanol. In order to enhance the sensitivity of the sensor, a composite of the polymer and nickel oxide (NiO) nanoparticles was formed as it improved the conductivity. This composite exhibited 100 times more conductivity than the neat polymer. The semiconductive nanocomposite of poly [N¹,N⁴‐bis(thiophen‐2‐ylmethylene)benzene‐1,4‐diamine]‐nickel oxide (PBTMBDA‐NiO) was prepared by in situ chemical oxidative polymerization. The monomer was N¹,N⁴‐bis(thiophen‐2‐ylmethylene)benzene‐1,4‐diamine (BTMBDA). The monomer (BTMBDA), polymer (PBTMBDA), and NiO nanoparticles used in this study were synthesized. The monomer was prepared by refluxing together 2‐thiophene carboxaldehyde, benzene‐1,4‐diamine, and few drops of glacial acetic acid in ethanol medium for 3 h. The polymer, PBTMBDA, was formed by the chemical oxidative polymerization of BTMBDA in chloroform by FeCl₃. NiO nanoparticles were prepared by slow addition of aqueous ammonia to anhydrous nickel chloride at room temperature (28 ± 2 °C), and at a pH of 8 under constant stirring condition. The composite was formed by in situ chemical oxidative polymerization of BTMBDA in chloroform by FeCl₃ in the presence of the dispersed NiO nanoparticles. The molecular structure of BTMBDA and PBTMBDA were confirmed by nuclear magnetic resonance (NMR) (¹H, ¹³C, and Dept‐90°), Fourier transform infrared spectroscopy, and ultraviolet (UV)–visible spectroscopy. The PBTMBDA and PBTMBDA‐NiO nanocomposite were characterized by X‐ray diffraction, thermogravimetric analysis, field emission scanning electron microscopy, and energy‐dispersive X‐ray spectroscopy analysis. The results of characterization studies indicate the strong interaction between PBTMBDA and NiO in the nanocomposite. The broadness of ¹H NMR peaks in PBTMBDA was due to the increased number of monomer units. The disappearance of the peak of α‐hydrogens on thiophene confirms the polymerization involving the fifth position of thiophene part of BTMBDA. The Fourier transform infrared spectroscopy spectra revealed that position of the characteristic peaks of the functional groups in the monomer shifted toward lower wave numbers in PBTMBDA and PBTMBDA‐NiO nanocomposite. This shifting confirms the presence of extended conjugation along the polymer backbone. Electronic spectra of these compounds showed three absorption bands corresponding to π→π*, n→π* and n→π* transitions of π electron of carbon, lone pair electrons of S, and lone pair electrons of N (imine) groups, respectively. From the Tafel plot, the exchange current density evaluated for the BTMBDA and PBTMBDA are 0.2815 × 10⁻⁸ and 1.1508 × 10⁻⁸ A cm⁻², respectively. PBTMBDA is evaluated to be a better electrode material than the BTMBDA. The X‐ray diffraction plots showed that the characteristic peak of NiO in PBTMBDA‐NiO nanocomposite suggested successful incorporation of NiO in PBTMBDA‐NiO nanocomposite. The thermogravimetric analysis revealed the improved thermal stability of the composite. Field emission scanning electron microscopy and energy‐dispersive X‐ray spectroscopy analysis confirmed the presence of the NiO in the composite. Incorporation of nickel oxide nanoparticles improved the electrical conductivity and stability of PBTMBDA. The conductivity of the polymer was found to be of the order of 10⁻⁵ S cm⁻¹ while that of the composite was of the order of 10⁻³ S cm⁻¹. The nanocomposite was found to be thermally more stable than PBTMBDA and exhibited better direct‐current electrical conductivity and isothermal stability than the PBTMBDA as revealed by the four‐probe study. The electrical conductivity as inferred from the four‐probe method was used as the parameter to study the isothermal stability of the composite. The PBTMBDA‐NiO nanocomposite based vapor sensor was constructed for the sensing of ethanol vapor in commercial ethanol and real samples (alcoholic drinks: Beer, Wine, Brandy, Vodka, Whisky, and Rum) It was observed that on exposure to ethanol vapor at ambient temperature, the electrical resistivity of the nanocomposite increased indicating suppression of charge carriers. The interaction of ethanol vapor with PBTMBDA in PBTMBDA‐NiO nanocomposite was confirmed by IR spectral technique. The change in the structure of the PBTMBDA on interaction with ethanol was highlighted by the changes in the infrared spectrum. The conductivity of the polymer was explained using the structure‐activity relationship of the monomer evaluated using Gaussian 09 software. This study also analyzed the total electron density with electrostatic potential of the monomer and its correlation with chemical reactivity in order to explain the ethanol vapor sensing‐property of the nanocomposite. A new method of ethanol vapor sensing by a conducting polymer composite is hereby reported. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 45918.     

Poly(N‐isopropylacrylamide) gel‐based macroporous monolith for continuous‐flow recovery of palladium(II) ions

Macroporous monoliths, composed of thermoresponsive, tertiary‐aminated, and crosslinking monomers, were prepared for continuous‐flow separation of palladium(II) ions. N ‐Isopropylacrylamide was required to form the porous structure in the monoliths, indicating that the mechanism of porous structure formation involved polymerization‐induced phase separation of the poly(N ‐isopropylacrylamide) gel. Tertiary‐aminated monoliths showed adsorption selectivity for palladium(II) ions in hydrochloric media, compared with copper(II) ions. The maximum capacities of the monoliths with tertiary amine contents of 10, 20, 30, and 70 mol % for palladium(II) ions were 0.6, 1.1, 1.3, and 2.3 mmol/g, respectively. Darcy's permeabilities of water through the macroporous monolith were 10^?14 to 10^?13 m², and those were comparable to that through a commercially available membrane filter with a pore size of several micrometers. In the continuous‐flow process, the macroporous monolith with tertiary amine selectively adsorbed palladium(II) ions in the coexistence of copper(II) ions with 10 times higher concentration than the palladium(II) ions. The palladium(II) ions were eluted from the macroporous monolith, and the concentration of palladium(II) ions in the eluate was up to 45 times of that in the feed solution. The average enrichment factor and total recovery percentage of palladium(II) ions were 8.7 times and 95%, respectively. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134 , 44385.     

Palladium‐catalyzed electroless plating of gold on latex particle surfaces

Gold can be deposited onto a latex particle surface via the growth of metal islands with the electroless plating method. A new method is proposed for the electroless plating of gold on the surface of poly(styrene‐co‐vinylimidazole) latex particles, which is catalyzed by palladium present on the latex particle surfaces. The palladium ions are anchored to the latex particle surfaces by the formation of a palladium–imidazole complex, and palladium nanoparticles are nucleated by a reductant. These palladium islands act as catalytic sites, so gold is preferentially deposited onto the latex particle surfaces. Transmission electron microscopy, X‐ray photoelectron spectroscopy, and sucrose density gradient column results indicate that the palladium is associated with the imidazole‐functionalized latex particles. Different gold loading levels and reductant types were explored. Latex particles were partially encapsulated by finely dispersed gold nanoparticles less than 2 nm in diameter or by gold islands with sizes ranging from 10 to 100 nm up to a gold loading level of 3.1 mg of Au/m² of latex. However, using higher gold loading levels led to uncontrollable electroless plating of gold because gold reduction in the water phase became very dominant even in the presence of catalytic palladium on the latex particle surface. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

On the topology of highly branched polyethylenes prepared by amine−imine nickel and palladium complexes: the effect of ortho‐aryl substituents

Series of nickel and palladium complexes bearing amine?imine ligands in various ortho‐aryl and backbone positions were prepared and investigated in ethene polymerization. Ethene polymerization initiated by symmetrically ortho‐substituted nickel and palladium amine?imine catalysts is controlled. Mono‐substitution in the ortho‐aryl positions of nickel complexes is not as efficient in protecting centers from chain transfer as di‐substitution. Both the central metal and the size of the ortho‐aryl substituent have a significant effect on the polyethylene (PE) topology. Based on detailed characterization by high temperature SEC‐IR‐η, SEC with multi‐angle laser light scattering and ¹³C NMR data, PEs prepared by nickel amine?imine complexes have a linear rather than dendritic topology. In contrast, palladium amine?imine complexes with small ortho‐aryl substituents at low ethene pressure were shown for the first time to form dendritic PEs with topology comparable to PEs formed by α‐diimine palladium catalyst. © 2018 Society of Chemical Industry     

Probing the Mechanism of the Asymmetric Aminolysis of meso‐Epoxides Catalyzed by a Proline‐Based N,N′‐Dioxide‐Indium Tris(triflate) Complex

An exploration of the mechanism of the aminolysis of meso‐epoxides catalyzed by the proline‐based N,N′‐dioxide‐indium tris(triflate) complex was performed using control experiments, UV‐Vis spectroscopy, ¹H NMR, electrospray ionization mass spectrometry (ESI‐MS) and scanning electron microscopy (SEM). Control experiments disclosed that the ligand‐to‐indium tris(triflate) ratio, the catalyst loading, the concentration, and the presence of 4 Å MS have dramatic effects on this reaction with regard to both the yield and the enantioselectivity. Combined with control experiments, UV‐Vis spectroscopy, ¹H NMR, ESI‐MS and SEM analyses revealed that molecular sieves perform multiple functions in the catalysis. A plausible molecular sieves‐assisted reaction pathway was proposed. In this pathway, molecular sieves perform (i) as desiccant to in situ dry the reaction system, (ii) as proton transfer agent to accelerate the catalysis, and (iii) as counter ion source to preserve the electroneutrality of the transition states. Besides, the generality of the substrate scope was further explored; excellent yields (up to 99%) and enantioselectivities (up to 99% ee) were obtained.     

TiO2‐Oligoaldaramide nanocomposites as efficient core‐shell systems for wood preservation

Homogeneous core‐shell systems were obtained with a growth, in controlled steps, of several oligoamides on TiO₂ nanoparticles. Derivatives of natural compounds, such as l ‐tartaric acid and α,α′‐trehalose, were used as diesters in the polycondensation reactions with ethylenediamine. TiO₂ anatase was chosen because of its high photo‐activity and its antimicrobial activity. The TiO₂ nanoparticles had been previously activated then functionalized using two different coupling agents, and finally, the TiO₂‐oligoamide nanocomposites were synthesized using two synthetic pathways. The final products were characterized by ¹H NMR, ¹³C NMR, FT‐IR, and transmission electron microscope. These nanocomposites can show improved properties in comparison with the single components (TiO₂ nanoparticles or oligoamides), which are useful in many fields, such as antimicrobial coatings for surfaces in cultural heritage conservation. A nanocomposite (TiO₂‐polyethylenetartaramide) was used for applicative studies, and it has shown a good efficacy against fungal attack by Trametes versicolor on wood specimens (Fagus sylvatica). © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42047.     

Highly Active and Selective Semihydrogenation of Alkynes with the Palladium Nanoparticles‐Tetrabutylammonium Borohydride Catalyst System

Palladium nanoparticles are prepared from palladium(II) acetate and 2 equivalents of potassium tert‐butoxide in the presence of 4‐octyne. The palladium nanoparticles‐tetrabutylammonium borohydride system shows excellent catalytic activity and selectivity in the semihydrogenation of alkynes to the [(Z)‐]alkenes. The hydrogenation of 4‐octyne is conducted with the catalyst system at a substrate‐to‐palladium molar ratio of 10,000–200,000 under 8 atm of hydrogen to give (Z)‐4‐octene in>99% yield. Isomerization and over‐reduction of the Z‐alkene are very slow even after consumption of the alkyne.     

Novel comb‐structured‐polymer‐grafted carbon black by surface‐initiated atom transfer radical polymerization and ring‐opening polymerization

Novel comb‐structured‐polymer‐grafted carbon black (CB) was synthesized with a combination of surface‐initiated atom transfer radical polymerization and ring‐opening polymerization. First, poly(2‐hydroxyethyl methacrylate) (PHEMA) was grafted onto the CB surface by surface‐initiated atom transfer radical polymerization. The prepared CB‐g‐PHEMA contained 35.6–71.8% PHEMA, with the percentage depending on the molar ratio of the reagents and the reaction temperature. Then, with PHEMA in CB‐g‐PHEMA as the macroinitiator, poly(?‐caprolactone) (PCL) was grown from the CB‐g‐PHEMA surface by ring‐opening polymerization in the presence of stannous octoate. CB‐g‐PHEMA and CB‐g‐(PHEMA‐g‐PCL) were characterized with Fourier transform infrared, ¹H‐NMR, thermogravimetric analysis, dynamic light scattering, and transmission electron microscopy. The resultant grafted CB had a shell of PHEMA‐g‐PCL. On the whole, the CB nanoparticles were oriented in dendritic lamellae formed by these shells. This hopefully will result in applications in gas sensor materials and nanoparticle patterns. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Highly (≥98%) Stereo‐ and Regioselective Trisubstituted Alkene Synthesis of Wide Applicability via 1‐Halo‐1‐alkyne Hydro‐ boration–Tandem Negishi–Suzuki Coupling or Organoborate Migratory Insertion

(Z)‐1‐Halo‐1‐alkenylboranes ( 7 ), preparable in 80–90% yields as ≥98% isomerically pure compounds via hydroboration of 1‐halo‐1‐alkynes, have been converted to a wide range of trisubstituted alkenes via three different routes in the tail‐to‐head ( T ‐to‐ H ) direction, i.e., (i) palladium‐catalyzed Negishi–Suzuki tandem alkenylation, (ii) treatment with organolithium or Grignard reagents to generate α‐bromo‐1‐alkenylboronate complexes that can undergo migratory insertion of a carbon group (R²) to form (E)‐alkenylboranes with inversion of alkene configuration (≥98% inversion), followed by fluoride‐promoted Suzuki alkenylation, and (iii) Negishi coupling to generate (Z)‐alkenylboranes in ≥98% retention of configuration, followed by treatment with organolithium or Grignard reagents to produce trisubstituted alkenes with reversed stereo configurations. The synthetic utility of the present methodology has been demonstrated in the highly selective synthesis of the side chain of scyphostatin in 28% yield over nine steps in the longest linear sequence from allyl alcohol. Thus, this new tandem protocol has been emerged as the most widely applicable and highly selective route to trisubstituted alkenes including those that are otherwise difficult to prepare.     

Particle size and distribution of biodegradable poly‐D,L‐lactide‐co‐poly(ethylene glycol) block polymer nanoparticles prepared by nanoprecipitation

A biodegradable block copolymer, poly‐D ,L ‐lactide (PLA)‐co‐poly(ethylene glycol) (PEG), was prepared by the ring‐opening polymerization of lactide with stannous caprylate [Sn(Oct₂)] as a catalyst; then, the PLA–PEG copolymer was made into nanoparticles by nanoprecipitation under different conditions. The average molecular weight and structure of PLA–PEG were detected by ¹H‐NMR and gel permeation chromatography. The sizes and distributions of the nanoparticles were investigated with a laser particle‐size analyzer. The morphologies of the nanoparticles were examined by transmission electron microscopy. The effects of the solvent–nonsolvent system, operation conditions, and dosage of span‐80 on the sizes and distributions of the nanoparticles are discussed. The results show that acetone–water was a suitable solvent–nonsolvent system and the volume ratio of the nonsolvent phase to the solvent phase (O/W) (v/v), the concentration of PLA–PEG in the solvent phase, and the dosage of span‐80 had important effects on the particle sizes and distributions. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 98: 1884–1890, 2005