Photocationic and radical polymerizations by novel N‐phenacylammonium salts

Novel N‐phenacylammonium salts [N‐(α‐benzoylbenzyl)‐, N‐(1‐benzoylethyl)‐, N‐phenacyl‐, pyrazinium, 3‐bromoquinolinium, benzothiazolium, or p‐cyanopyridinium hexafluoroantimonates] were synthesized by the reaction of α‐benzoylbenzyl bromide, 2‐bromopropiophenone or phenacylbromide, and the corresponding N‐hetero aromatic compound, followed by anion exchange with KSbF₆. These N‐phenacylammonium salts showed higher activity than previously reported N‐benzyl‐2‐cyanopyridinium hexafluoroantimonate in the photopolymerization of epoxides. Further, these N‐phenacylammonium salts served as photoradical and thermal cationic initiators as well as photocationic initiators. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 91: 3470–3476, 2004     

Interpolymer‐specific interactions and miscibility in poly(styrene‐co‐acrylic acid)/poly(styrene‐co‐N,N‐dimethylacrylamide) blends

The miscibility or complexation of poly(styrene‐co‐acrylic acid) containing 27 mol % of acrylic acid (SAA‐27) and poly(styrene‐co‐N,N‐dimethylacrylamide) containing 17 or 32 mol % of N,N‐dimethylacrylamide (SAD‐17, SAD‐32) or poly(N,N‐dimethylacrylamide) (PDMA) were investigated by different techniques. The differential scanning calorimetry (DSC) analysis showed that a single glass‐transition temperature was observed for all the mixtures prepared from tetrahydrofuran (THF) or butan‐2‐one. This is an evidence of their miscibility or complexation over the entire composition range. As the content of the basic constituent increases as within SAA‐27/SAD‐32 and SAA‐27/PDMA, higher number of specific interpolymer interactins occurred and led to the formation of interpolymer complexes in butan‐2‐one. The qualitative Fourier transform infrared (FTIR) spectroscopy study carried out for SAA‐27/SAD‐17 blends revealed that hydrogen bonding occurred between the hydroxyl groups of SAA‐27 and the carbonyl amide of SAD‐17. Quantitative analysis carried out in the 160–210°C temperature range for the SAA‐27 copolymer and its blends of different ratios using the Painter–Coleman association model led to the estimation of the equilibrium constants K₂, K_A and the enthalpies of hydrogen bond formation. These blends are miscible even at 180°C as confirmed from the negative values of the total free energy of mixing ΔG_M over the entire blend composition. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 1011–1024, 2007     

Efficient Inhibition of Telomerase by Nickel–Salophen Complexes

Four nickel(II)–salophen complexes containing alkyl‐imidazolium chains connected at the ortho or meta positions were prepared: N,N′‐bis(2‐hydroxy‐4‐methyl‐3H‐imidazol‐1‐iumbenzylideneamino)phenylenediamine ( 1 ), N,N′‐bis(2‐hydroxy‐3‐methyl‐3H‐imidazol‐1‐iumbenzylideneamino)phenylenediamine ( 2 ), N,N′‐bis(2‐hydroxy‐3‐methyl‐3H‐imidazol‐1‐iumbenzylideneamino)methyl‐3H‐imidazol‐1‐iumphenylenediamine ( 3 ), and N,N′‐bis(2‐hydroxy‐4‐methyl‐3H‐imidazol‐1‐iumbenzylideneamino)methyl‐3H‐imidazol‐1‐iumphenylenediamine ( 4 ). They protect G‐quadruplex DNA (G₄‐DNA) against thermal denaturation and show K_A values in the range of 7.4×10⁵ to 4×10⁷ m ^?1 for G₄‐DNA models. Complex 4 exhibits an IC₅₀ value of 70 nm for telomerase inhibition.     

Copper‐based reverse ATRP process for the controlled radical polymerization of methyl methacrylate

A series of copper‐based reverse atom transfer radical polymerizations (ATRP) were carried out for methyl methacrylate (MMA) at same conditions (in xylene, at 80°C) using N,N,N′,N′‐teramethylethylendiamine (TMEDA), N,N,N′,N′,N′‐pentamethyldiethylentriamine (PMDETA), 2‐2′‐bipyridine, and 4,4′‐Di(5‐nonyl)‐2,2′‐bipyridine as ligand, respectively. 2,2′‐azobis(isobutyronitrile) (AIBN) was used as initiator. In CuBr₂/bpy system, the polymerization is uncontrolled, because of the poor solubility of CuBr₂/bpy complex in organic phase. But in other three systems, the polymerizations represent controlled. Especially in CuBr₂/dNbpy system, the number‐average molecular weight increases linearly with monomer conversion from 4280 up to 14,700. During the whole polymerization, the polydispersities are quite low (in the range 1.07–1.10). The different results obtained from the four systems are due to the differences of ligands. From the point of molecular structure of ligands, it is very important to analyze deeply the two relations between (1) ligand and complex and (2) complex and polymerization. The different results obtained were discussed based on the steric effect and valence bond theory. The results can help us deep to understand the mechanism of ATRP. The presence of the bromine atoms as end groups of the poly(methyl methacrylate) (PMMA) obtained was determined by ¹H‐NMR spectroscopy. PMMA obtained could be used as macroinitiator to process chain‐extension reaction or block copolymerization reaction via a conventional ATRP process. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

Iron‐Catalyzed Oxidative Mono‐ and Bis‐Phosphonation of N,N‐Dialkylanilines

The dehydrogenative α‐phosphonation of substituted N,N‐dialkylanilines by dialkyl H‐phosphonates was achieved under mild conditions by using environmentally benign iron(II) chloride as catalyst and tert‐butyl hydroperoxide as oxidant. The reaction proceeded in the presence of electron‐donating (methoxy, methyl, benzyl) and electron‐withdrawing ring‐substitutents (bromo, carbonyl, carboxyl, m‐nitro) in moderate to good yields. The X‐ray crystal structure of N‐(5,5‐dimethyl‐2‐oxo‐2λ⁵‐[1,3,2]dioxaphosphinan‐2‐yl‐methyl)‐N‐methyl‐p‐toluidine was determined. Bis‐(4‐(dimethylamino)phenyl)methane and bis‐4,4′‐(dimethylamino)benzophenone underwent bisphosphonation selectively by respective monophosphonation at the remote dimethylamino groups. Furthermore, the use of excess dialkyl H‐phosphonate and oxidant allowed us to functionalize both methyl groups of N(CH₃)₂ in N,N‐dimethyl‐p‐toluidine and N,N‐dimethylaminomesidine, respectively, to obtain α,α′‐bisphosphonatoamines in high yield.     

Highly Efficient Ligands for the Palladium‐Assisted Double N‐Arylation of Primary Amines for One‐Sep Construction of Carbazoles

A highly efficient one‐pot synthesis of carbazoles via palladium‐catalyzed double N‐arylation of primary amines with 2,2′‐dihalobiphenyls is described using a catalyst system comprised of tris(dibenzylideneacetone)dipalladium(0) (Pd₂dba₃) and the proazaphosphatrane P(i‐BuNCH₂CH₂)₃N ( 8 ) or its derivative (t‐Bu)₂PN P(i‐BuNCH₂CH₂)₃N ( 9a ) as the ligand. The process is effective for double N‐arylation of 2,2′‐biphenyl dibromide, diiodide, and even dichloride with a variety of primary amines including neutral, electron‐rich, electron‐deficient, and sterically hindered anilines as well as aliphatic amines.     

5‐(Piperidin‐4‐yl)‐3‐Hydroxypyrazole: A Novel Scaffold for Probing the Orthosteric γ‐Aminobutyric Acid Type A Receptor Binding Site

A series of bioisosteric N₁‐ and N₂‐substituted 5‐(piperidin‐4‐yl)‐3‐hydroxypyrazole analogues of the partial GABA_AR agonists 4‐PIOL and 4‐PHP have been designed, synthesized, and characterized pharmacologically. The unsubstituted 3‐hydroxypyrazole analogue of 4‐PIOL ( 2 a ; IC₅₀～300 μM ) is a weak antagonist at the α₁β₂γ₂ GABA_AR, whereas substituting the N₁‐ or N₂‐position with alkyl or aryl substituents resulted in antagonists with binding affinities in the high nanomolar to low micromolar range at native rat GABA_ARs. Docking studies using a α₁β₂γ₂ GABA_AR homology model along with the obtained SAR indicate that the N₁‐substituted analogues of 4‐PIOL and 4‐PHP, 2 a – k , and previously reported 3‐substituted 4‐PHP analogues share a common binding mode to the orthosteric binding site in the receptor. Interestingly, the core scaffold of the N₂‐substituted analogues of 4‐PIOL and 4‐PHP, 3 b – k , are suggested to flip 180° thereby adapting to the binding pocket and addressing a cavity situated above the core scaffold.     

ZIF‐11/Polybenzimidazole composite membrane with improved hydrogen separation performance

Zeolitic imidazolate framework (ZIF)‐11 crystals were prepared by the toluene‐assisted method, and they were incorporated into polysulfone, polyethersulfone, and polybenzimidazole (PBI) matrix to investigate the compatibility. ZIF‐11 had a good connection with PBI matrix as they had the same benzimidazole groups. The evaporation temperature of the membrane formation was studied with two different solvents: N‐methyl‐2‐pyrrolidone (NMP) and N,N‐dimethylacetamide (DMAc). Then, the ZIF‐11/PBI composite membranes prepared using NMP or DMAc as the solvent were characterized and tested by gas separation. Improved H₂ and CO₂ permeabilities with a H₂/CO₂ ideal selectivity of 5.6 were obtained on the 16.1 wt % ZIF‐11/PBI composite membrane prepared with DMAc as the solvent. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 41056.     

Subject Index to Volume 21

Abstract

Time‐resolved laser‐induced fluorescence spectroscopy (TRLFS) was employed to determine the inner‐sphere (i.e., first coordination sphere) hydration number (N _H2O) of lanthanide(III) ions (Ln = Sm, Eu, Tb, and Dy) in the TRPO‐dodecane/HNO₃ (or HNO₃–NaNO₃) system under various conditions. In addition, the N _H2O of Ln(III) in extracted complexes with octyl(phenyl)‐N,N‐diisobutylcarbamoylmethyl phosphine oxide (CMPO), dihexyl‐N,N‐diethylcarbamoylmethyl phosphonate (CMP), trioctyl phosphine oxide (TOPO), and tributyl phosphate (TBP) were also determined. The results show that there is no water molecule in the first coordination sphere of Ln(III) complexes, except for Sm(III) and Dy(III) in CMP complexes.     

Bifunctional Catalysts Stabilized on Nanocrystalline Magnesium Oxide for One‐Pot Synthesis of Chiral Diols

New bifunctional catalysts composed of PdCl₄²⁻, OsO₄²⁻ and OsO₄²⁻, WO₄²⁻ designed and prepared by a counterionic stabilization technique involving the reactions of Na₂PdCl₄‐K₂OsO₄ and K₂OsO₄‐Na₂WO₄ with nanocrystalline MgO are well characterized. These bifunctional catalysts, NAP‐Mg‐PdOs and NAP‐Mg‐OsW perform tandem Heck asymmetric dihydroxylation and asymmetric dihydroxylation‐N‐oxidation reactions, respectively, in the presence of the chiral ligand 1,4‐bis(9‐o‐dihydroquinidinyl)phthalazine [(DHQD)₂PHAL] in a single pot. It is quite impressive to note that H₂O₂ is used as a terminal oxidant to provide N‐methylmorpholine N‐oxide (NMO) in situ by the oxidation of N‐methylmorpholine (NMM) in the asymmetric dihydroxylation‐N‐oxidation catalyzed by NAP‐Mg‐OsW.     

Reactions of copper ions with amines in the presence of self‐assembled fluorinated oligomeric aggregates

Copper acetylacetonate reacted with N,N‐diethylmethylamine and 4,4′‐thiobis(6‐t‐butyl‐o‐cresol) in the presence of self‐assembled fluorinated oligmeric aggregates formed by fluoroalkyl end‐capped 2‐[3‐(2H‐benzotriazol‐2‐yl)‐4‐hydroxyphenyl]ethyl methacrylate–N,N‐dimethylacrylamide cooligomer [R_F–(BTRI)_x–(DMAA)_y–R_F; R_F = CF(CF₃)OCF₂CF(CF₃)OC₃F₇] to afford stable fluorinated aggregates–copper ions nanocomposites. These fluorinated oligomeric aggregates–copper ions nanocomposites thus obtained were applied to the dispersion of copper ions nanocomposites above the traditional organic polymeric materials such as poly(methyl methacrylate) (PMMA) surface. On the other hand, copper (II) chloride reacted with hydrazine hydrate in the presence of fluorinated oligomeric aggregates formed by fluoroalkyl end‐capped N,N‐dimethylacrylamide homooligomer to afford stable copper nanoparticles. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 1328–1334, 2006     

Recovery and Recycling of CO2/N2‐Switchable Anionic Surfactants in Emulsions

To develop a mild, effective, and clean strategy for recovery and recycling of anionic surfactants in CO₂/N₂‐switchable emulsions, a CO₂/N₂‐switchable anionic surfactant, which is a combination of dodecyl seleninic acid (DSA) and N,N,N′,N′‐tetramethyl‐1,2‐ethylenediamine (TMEDA), here referred to as DSA–TMEDA, was used to stabilize an oil‐in‐water (O/W) emulsion. Upon stimulation with CO₂, DSA–TMEDA was switched off to form insoluble DSA and the water‐soluble TMEDA bicarbonate. Upon N₂ bubbling and heating, the OFF state of DSA–TMEDA was restored to the surfactant of DSA–TMEDA. In this manner, O/W emulsions stabilized by DSA–TMEDA can be switched reversibly between demulsification (phase separation) and re‐emulsification (recovered emulsion) by triggering with CO₂/N₂ over ten times. After breakage of the emulsion, nearly all of the OFF state surfactant could be separated conveniently away from the oil phase, thus facilitating recovery and recycling of the surfactant afterward in emulsifying oil. No obvious adverse changes in the dispersed oil particles size and the relative stability of the regenerated emulsions were observed over five cycles, and the surfactant loss can be neglected during the recycling.     

Single‐Pot Ethane Carboxylation Catalyzed by New Oxorhenium(V) Complexes with N,O Ligands

The oxorhenium(V) chelates [ReOCl(N,O‐L)(PPh₃)] [N,O‐L=(OCH₂CH₂)N(CH₂CH₂OH)(CH₂COO) ( 2 ), (OCH₂CH₂)N(CH₂COO)(CH₂COOCH₃) ( 3 )] and [ReOCl₂(N,O‐L)(PPh₃)] [N,O‐L=C₅H₄N(COO‐2) ( 4 ) C₅H₃N(COOCH₃‐2)(COO‐6) ( 5 )] have been prepared by reaction of [ReOCl₃(PPh₃)₂] ( 1 ), in refluxing methanol, with N,N‐bis(2‐hydroxyethyl)glycine [bicine; N(CH₂CH₂OH)₂(CH₂COOH)], N‐(2‐hydroxyethyl)iminodiacetic acid [N(CH₂CH₂OH)(CH₂COOH)₂], picolinic acid [NC₅H₄(COOH‐2)] or 2,6‐pyridinedicarboxylic acid [NC₅H₃(COOH‐2,6)₂], respectively, with ligand esterification in the cases of 3 and 5 . All these complexes have been characterized by IR and multinuclear NMR spectroscopy, FAB⁺‐MS, elemental and X‐ray diffraction structural analyses. They act as catalysts, in a single‐pot process, for the carboxylation of ethane by CO, in the presence of potassium peroxodisulfate K₂S₂O₈, in trifluoroacetic acid (TFA), to give propionic and acetic acids, in a remarkable yield (up to ca. 30%) and under relatively mild conditions, with some advantages over the industrial processes. The picolinate complex 4 provides the most active catalyst and the carboxylation also occurs, although much less efficiently, by the TFA solvent in the absence of CO. The selectivity can be controlled by the ethane and CO pressures, propionic acid being the dominant product for pressures about ca. 7 and 4 atm, respectively (catalyst 4 ), whereas lower pressures lead mainly to acetic acid in lower yields. These reactions constitute an unprecedented use of Re complexes as catalysts in alkane functionalization.     

Synthesis and Performance Evaluation of CO2/N2 Switchable Tertiary Amine Gemini Surfactant

A type of switchable tertiary amine Gemini surfactant, N,N′‐di(N,N‐dimethyl propylamine)‐N,N′‐didodecyl ethylenediamine, was synthesized by two substitution reactions with 3‐chloro‐1‐(N,N‐dimethyl) propylamine, bromododecane and ethylene diamine as main raw materials. The structure of the product was characterized by FTIR and ¹H‐NMR. We also investigated the surface tension when CO₂ was bubbled in different concentrations of surfactant solution and the influence of different CO₂ volumes on surface tension under a constant surfactant concentration. Finally the surface tension curve and the related parameters were acquired by surface tension measurements. The experimental results showed that the structure of the synthesized compounds were in conformity with the expected structure of the surfactant, and displayed a better surface activity after bubbling CO₂. The critical micelle concentration (CMC) surface tension at CMC (γ_cmc) pC₂₀ (negative logarithm of the surfactant's molar concentration C₂₀, required to reduce the surface tension by 20 mN/m) surface excess (Γ_max) at air/solution interface and the minimum area per surfactant molecule at the air/solution interface (A_min) were determined. Results indicate that the target product had good surface activity after bubbling CO₂.     

Studies on Electrophilic Interaction of 2,3‐Allenols with Electrophilic Halogen Reagents: Selective Synthesis of 2,5‐Dihydrofurans, 3‐Halo‐3‐alkenals,or 2‐Halo‐2‐alkenyl Ketones

The reaction of primary 2,3‐allenols with iodine (I₂) afforded 2,5‐dihydrofurans while that of readily available 1‐aryl or 1‐methyl substituted 2,3‐allenols with bromine (Br₂), N‐bromosuccinimide (NBS), I₂ or N‐iodosuccinimide (NIS) formed the not easily available but synthetically useful 3‐halo‐3‐alkenals and 2‐halo‐2‐alkenyl ketones with good selectivity and yields via a sequential electrophilic interaction of X⁺ with the allene moiety, 1,2‐aryl or 1,2‐proton shift, and H⁺ elimination process.     

The Catalytic Asymmetric Addition of Diethylzinc to N‐(Diphenylphosphinoyl) Imines Catalyzed by Cu(OTf)2‐Chiral N‐(Binaphthyl‐2‐yl)thiophosphoramide Ligands

Chiral N‐(binaphthyl‐2‐yl)thiophosphoramide L7 [O,O‐diethyl 2′‐(ethylamino)‐1,1′‐binaphthyl‐2‐ylamidothiophosphate] prepared from the reaction of diethyl chlorothiophosphate with (R)‐(+)‐N‐ethyl‐1,1′‐binaphthyl‐2,2′‐diamine was used as a catalytic chiral ligand in the first Cu(OTf)₂‐promoted catalytic asymmetric addition of diethylzinc to N‐(diphenylphosphinoyl) imines in which ~85% ee can be realized.     

Modified carrageenan. 4. Synthesis and swelling behavior of crosslinked κC‐g‐AMPS superabsorbent hydrogel with antisalt and pH‐responsiveness properties

To synthesize a novel biopolymer‐based superabsorbent hydrogel, 2‐acrylamido‐2‐methylpropanesulfonic acid (AMPS) was grafted onto kappa‐carrageenan (κC) backbones. The graft copolymerization reaction was carried out in a homogeneous medium and in the presence of ammonium persulfate (APS) as an initiator, N,N,N′,N′‐tetramethyl ethylenediamine (TMEDA) as an accelerator, and N,N′‐methylene bisacrylamide (MBA) as a crosslinker. A proposed mechanism for κC‐g‐AMPS formation was suggested and the hydrogel structure was confirmed using FTIR spectroscopy. The affecting variables on swelling capacity, i.e., the initiator, the crosslinker, and the monomer concentration, as well as reaction temperature, were systematically optimized. The swelling measurements of the hydrogels were conducted in aqueous solutions of LiCl, NaCl, KCl, MgCl₂, CaCl₂, SrCl₂, BaCl₂, and AlCl₃. Due to the high swelling capacity in salt solutions, the hydrogels may be referred to as antisalt superabsorbents. The swelling of superabsorbing hydrogels was measured in solutions with pH ranging 1 to 13. The κC‐g‐AMPS hydrogel exhibited a pH‐responsiveness character so that a swelling–deswelling pulsatile behavior was recorded at pH 2 and 8. The overall activation energy for the graft copolymerization reaction was found to be 14.6 kJ/mol. The swelling kinetics of the hydrogels was preliminarily investigated as well. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 98: 255–263, 2005     

Cationic starch iodophores

Cross‐linked cationic starches N‐(2‐hydroxyl)propyl‐3‐trimethyl ammonium starch chloride (CQS chloride), N‐(2‐hydroxyl)propyl‐3‐trimethyl ammonium starch iodide (CQS iodide), and N‐(2‐hydroxyl)propyl‐3‐trimethyl ammonium starch iodide–iodine (CQS triiodide) with the degree of substitution (DS) according to cationic groups from 0.04 to 0.62, as well as cross‐linked starch–iodine complexes were synthesized and tested as potential antibacterial agents. Cationic starch iodine derivatives were obtained during ion exchange reaction between CQS chloride and iodide or iodide–iodine anions in aqueous solutions. CQS_DS≤0.3 chloride can form several types of iodine complexes, such as the blue amylose–iodine inclusion complex and ionic CQS⁺I^?·(I₂)_m complex (m ≥ 1). The antibacterial activity of modified starches–iodine samples against different pathogenic bacterial cultures and contaminated water microorganisms was evaluated. CQS chloride and CQS iodide were found to be bacteriostatic. A strong antibacterial activity was characteristic of CQS triiodides in which molecular iodine is present in both ionic and inclusion complexes. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

(Salen)chromium Complex Mediated Asymmetric Ring Opening of meso‐ and Racemic Epoxides with Different Fluoride Sources

The asymmetric ring opening of five meso‐ and three racemic epoxides with different fluorinating reagents in the presence of stoichiometric or slightly sub‐stoichiometric amounts of Jacobsen's enantiopure (salen)chromium chloride complex A gave the corresponding optically active vicinal fluorohydrins. Silver fluoride was used as one of the fluoride sources either in the presence of Bu₄N⁺H₂F₃⁻ in diethyl ether or in acetonitrile. The latter reactions starting from cyclohexene oxide ( 1 ) showed maximum 72% ee in the formed fluorohydrin 2 isolated in 90% yield. From other meso‐epoxides such as cyclopentene oxide and cycloheptene oxide the corresponding fluorohydrins were isolated in 80% and 82% yield with 65% and 62% ee, respectively. In case of ring opening under similar conditions of the racemic styrene oxide or phenyl glycidyl ether 83% and 75% of the fluorohydrins with fluorine in the primary position were isolated with 74% ee and 65% ee, respectively. Tetrahydronaphthalene oxide yielded a 2:1 mixture of trans‐ (23% ee) and cis‐2‐fluoro‐3,4‐benzocyclohexenol (2% ee) suggesting competing S_N2 and S_N1 type ring openings. Other epoxides such as cyclooctene oxide, cis‐stilbene oxide and α‐methylstyrene oxide did not react or gave the fluorohydrins with very small enantiomeric excess.     

Potentiometric studies of oxidation–reduction reactions with redox copolymers

Polymeric oxidants in the bead form that were macroporous styrene/divinylbenzene copolymers containing N‐chlorosulfonamide functional groups (in sodium or hydrogen form) or N‐bromosulfonamide groups (in sodium form) were synthesized and investigated to determine their oxidizing powers. The redox potentials of the N‐chlorosulfonamide/sulfonamide and N‐bromosulfonamide/sulfonamide systems were determined by potentiometric studies at different pH values with aqueous solutions of Na₂SO₃, KCN, and KSCN as reducers. The formal redox potentials of the N‐chlorosulfonamide copolymers were 0.79, 0.44, and ?0.12 V at pH's of 1.8, 8.45, and 13.6, respectively. The formal redox potential of the N‐bromosulfonamide copolymer was about 100 mV higher in comparable conditions and in solutions over pH = 5 (e.g., 0.56 V at pH = 8.56). The comparatively higher oxidizing power of the N‐bromosulfonamide copolymer was particularly evident in a strong alkaline medium (in which the N‐chlorosulfonamide copolymer was not reactive). In contrast, the N‐chlorosulfonamide copolymer showed strong oxidative properties in acidic media (in which the N‐bromosulfonamide copolymer decomposed itself). © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2008