共查询到20条相似文献,搜索用时 62 毫秒
1.
2.
3.
利用直流磁控溅射法在有ZnO:Zr缓冲层的水冷玻璃衬底上成功制备出了ZnO:Zr透明导电薄膜,缓冲层的厚度介于35~208 nm.利用XRD、SEM、四探针测试仪和紫外-可见分光光度计研究ZnO:Zr薄膜的结构、形貌、电光性能.结果表明,薄膜的颗粒尺寸和电阻率对缓冲层厚度具有较强的依赖性.当缓冲层厚度从35 nm增加到103 nm时,薄膜的颗粒尺寸增大,电阻率减小.而当缓冲层厚度从103 nm增加到208 nm时,薄膜的颗粒尺寸减小,电阻率增大.当缓冲厚度为103 nm时,薄膜的电阻率最小为2.96×10-3 Ω·cm,远小于没有缓冲层时的12.9×10-3 Ω·cm.实验结果表明,在沉积薄膜之前先沉积一层适当的缓冲层是提高ZnO:Zr薄膜质量的一种有效方法. 相似文献
4.
5.
用射频磁控溅射法在玻璃衬底上氩气气氛中制备出(Al,Zr)共掺杂的ZnO透明导电薄膜,研究了不同Zr掺杂浓度和薄膜厚度ZnO薄膜的结构、电学和光学特性。结果表明,在最佳沉积条件下我们制备出了具有(002)单一择优取向的多晶六角纤锌矿结构,电阻率为2.2×10-2Ω.cm,且可见光段(320~800nm)平均透过率达到85%的ZnO透明导电薄膜。在150℃的条件下对(Al,Zr)共掺杂的ZnO薄膜进行1h的退火处理,薄膜电阻率降低至8.4×10-3Ω.cm。Zr杂质的掺入改善了薄膜的可见光透光性。 相似文献
6.
7.
掺锆氧化锌透明导电薄膜的制备及特性研究 总被引:1,自引:2,他引:1
利用射频磁控溅射法在室温水冷玻璃衬底上成功地制备出了掺锆氧化锌(ZnO:Zr)透明导电薄膜.研究了溅射功率对ZnO:Zr薄膜结构、形貌和光电性能的影响.研究结果表明,溅射功率对ZnO:Zr薄膜的结构和电阻率有显著影响.X射线衍射(XRD)表明,ZnO:Zr薄膜为六角纤锌矿结构的多晶薄膜,且具有C轴择优取向.在溅射功率为150 W时,实验获得的ZnO:Zr薄膜电阻率具有最小值3.8×10-3Ω·cm.实验制备的ZnO:Zr薄膜具有良好的附着性能,可见光区平均透过率超过92%.ZnO:Zr薄膜可以用作薄膜太阳能电池和液晶显示器的透明电极. 相似文献
8.
利用直流磁控溅射法在有ZnO∶Zr缓冲层的水冷玻璃衬底上成功制备出了ZnO∶Zr透明导电薄膜,缓冲层的厚度介于35~208nm。利用XRD、SEM、四探针测试仪和紫外-可见分光光度计研究ZnO∶Zr薄膜的结构、形貌、电光性能。结果表明,薄膜的颗粒尺寸和电阻率对缓冲层厚度具有较强的依赖性。当缓冲层厚度从35nm增加到103nm时,薄膜的颗粒尺寸增大,电阻率减小。而当缓冲层厚度从103nm增加到208nm时,薄膜的颗粒尺寸减小,电阻率增大。当缓冲厚度为103nm时,薄膜的电阻率最小为2.96×10^-3Ω.cm,远小于没有缓冲层时的12.9×10^-3Ω.cm。实验结果表明,在沉积薄膜之前先沉积一层适当的缓冲层是提高ZnO∶Zr薄膜质量的一种有效方法。 相似文献
9.
10.
11.
The article describes a model representation of radar probing data in form of a mixture of background and target samples, which is the sum of two random variables with very different parameters. For model development we research the behavior of the central moments of the distribution mix without assuming the distribution law form. An example it is described the detection of the signal at the output of compression system of chirp ionosonde. 相似文献
12.
13.
解决IP网QoS问题是目前通信领域的研究热点之一.虽然研究已经取得了一定的进展,但人们对于IP 网QoS本身的含义及相关的问题还有着不同的理解.本文将从IP网QoS的定义入手讨论相关的一些问题以及解决IP网QoS问题所做的各种努力. 相似文献
14.
《Proceedings of the IEEE. Institute of Electrical and Electronics Engineers》1968,56(6):1024-1032
Assuming that visual responses are due to the action of particles on the membrane of the visual cells, the stochastic variability of the response should be a function of the number of particles producing it. Quantitative predictions can be made with the aid of a model proposed in previous articles. It is found that responses produced in visual cells of Limulus by absorption of a single photon have the stochastic properties which would be expected if the response to one photon were brought about by 25 particles. It is concluded from this that the processes leading to visual responses produce multiplication of particles. The effects of temperature and of metabolic poisons suggest that these processes are of chemical nature. 相似文献
15.
16.
罗晓羽 《信息技术与标准化》2008,(6):37-39
论述了推进电子行业标准制修订项目计划管理信息化的必要性.并提出了具体措施;详细介绍了电子行业标准制修订项目计划管理数据库的设计思路和实现方法.阐述了对后续工作的几点思考. 相似文献
17.
对影响镍镀层内应力的因素做了介绍和分析,提出了对收缩应力的一种解释,提供了排除这些因素影响的方法,指出重视镀液的管理是减少各种影响内应力因素的主要办法。 相似文献
18.
A. M. Emel’yanov 《Semiconductors》2010,44(9):1134-1139
A method for analyzing the luminescence spectra of semiconductors is suggested. The method is based on differentiation of
the spectra. The potentialities of the method are demonstrated for luminescence in the region of the fundamental absorption
edge of Si and SiGe alloy single crystals. The method is superior in accuracy to previously known luminescence methods of
determining the band gap of indirect-gap semiconductors and practically insensitive to different conditions of outputting
radiation from the sample. 相似文献
19.
“计算机组成原理”设计性实践教学模式研究 总被引:1,自引:0,他引:1
本文阐述了"计算机组成原理"设计性实验教学的重要性,对设计性实验教学的目的和基本特征进行了归纳,对"计算机组成原理"设计性实验教学的现状进行了调查,对存在的问题进行了较深入的分析;在此基础上.对组成原理设计性实验的教学模式进行了研究,对设计性实验的体系进行了初步设计,并对"计算机组成原理"设计性实验的实施方法进行了探讨. 相似文献