共查询到20条相似文献,搜索用时 734 毫秒
1.
PLC在锅炉控制系统中的应用 总被引:1,自引:0,他引:1
孙欣 《仪器仪表标准化与计量》2006,(2):41-42
在分析锅炉原控制系统的基础上,提出用可编程控制器(PLC)控制的改造方案,介绍一个用上位机与PLC构成的锅炉控制系统,给出系统硬件的构成,通过PLC实现锅炉的各种控制调节功能。 相似文献
3.
随着PLC应用技术的不断发展,PLC的应用范围日益广泛,使得当今工程技术人员在设计电气控制系统时,考虑取代接触器控制而去选用PLC控制。 相似文献
4.
通用模糊控制器在PLC上的实现 总被引:9,自引:0,他引:9
介绍采用离线计算、在线查表插值的方法实现通用模糊控制器在PLC上实现的设计方法。提出增量式/位置式模糊控制输出算法、带死区的模糊控制算法以及二元三点插值法来改善通用模糊控制器的性能,通过控制表和在线部分直接下载到PLC的CPU模块中的方法,来满足通用性的要求。这种PLC通用模糊控制器可作为控制系统的一部分,也可用于控制过程分析、仿真和开发模糊控制系统的工具。 相似文献
5.
6.
7.
8.
气动机械手及其PLC控制系统的设计与实现 总被引:2,自引:0,他引:2
介绍利用PLC控制3个气缸带动工业气动机械手完成物料搬运工作的气动机械手及其PLC控制系统的设计与实现方法,该方法提高了气动机械手及其控制的开发效率,增强了该机械手的扩展性、移植性,并为复杂气动机械手系统的设计开发提供借鉴。 相似文献
9.
现代PLC控制技术与发展 总被引:2,自引:0,他引:2
陈洁 《精密制造与自动化》2004,(4):48-49
首先对PLC控制系统进行了简要地介绍,而后以数据说明了PLC的应用现状,最后分析了PLC控制系统的发展前景。 相似文献
10.
11.
12.
介绍了GK-02微机过程控制系统,MSComm控件的主要属性,主要事件,详细论述如何利用MSComn控件在过程控制系统中发送和接收数据. 相似文献
13.
Bai-Fu Lin Ruey-Jing Lian 《The International Journal of Advanced Manufacturing Technology》2006,29(3-4):296-307
This study described the design and construction of gas-assisted injection molding systems incorporating a traditional injection
molding machine. This combined system is called a gas-assisted injection molding control system (GAIMCS). The mathematical
model of GAIMCS with nonlinear dynamics is difficult to establish accurately. Therefore, model-free intelligent control strategies
were developed to control this system and evaluate its control performances. This work presents two intelligent control strategies:
(1) traditional fuzzy controller (TFC), and (2) grey prediction fuzzy controller (GPFC). The GAIMCS was controlled by the
GPFC, which was compared to a TFC to evaluate the system control performance. The GPFC achieves better control performances
in accelerating rise time, and it reduces the system steady-state error better than the TFC for high-pressure gas control
in GAIMCS, based on the verified experimental results. 相似文献
14.
简单介绍了控制理论的形成和发展、电液控制系统的组成,详细地阐述了电液控制系统的控制方法,控制理论广泛应用于电液控制系统中,是自动化技术发展水平的重要标志,它对电液控制系统性能的改善起着举足轻重的作用。 相似文献
15.
对于基于Internet的网络化控制系统,由于其网络延时具有随机、长时滞特性,使得控制系统稳定性和动态性能很差。本文基于离散的状态反馈网络化控制系统,提出了一种基于对象模型的多步预测补偿方法,通过在执行器端设置消息缓冲的办法实现时滞补偿的策略。基于Socket技术,应用LabWindows/CVI,采用以上时滞补偿方法设计了基于Internet的液位过程控制系统。实时跟踪控制实验和抗外部扰动实验结果结果表明,本文所提时滞补偿策略有效可行,能够很好地提高网络控制系统的动态性能。 相似文献
16.
Focussing on shop floor control for discrete parts cellular manufacturing systems, the author proposes a functional architecture for managing the flow of work through the system in quasi real time. The shop floor control (SFC) system must be flexible, portable and also must support interoperability 相似文献
17.
《Manufacturing Engineer》1995,74(6):284-286
In a modern manufacturing enterprise the shop floor must be an integral part of the whole organisation. The author explains how the entire production process, from material supplier to customer, must be optimised 相似文献
18.
19.