多功能柱净化-超高效液相色谱串联质谱法同时测定水产品中11种真菌毒素

建立了同步测定水产品中黄曲霉毒素B1(AFB1)、黄曲霉毒素B2(AFB2)、黄曲霉毒素G1(AFG1)、黄曲霉毒素G2(AFG2)、黄曲霉毒素M1(AFM1)、赭曲霉毒素A(OTA)、玉米赤霉烯酮(ZEN)、脱氧雪腐镰刀菌烯醇(DON)、3-乙酰基脱氧雪腐镰刀菌烯醇(3-Ac DON)、15-乙酰基脱氧雪腐镰刀菌烯醇(15-Ac DON)、镰刀菌烯酮(Fus-X)等11种真菌毒素的超高效液相色谱-串联质谱分析方法。试样样品以乙腈/水溶液(84+16)提取,Myco Spin 400多功能柱净化,Waters ACQUITY UPLCTM BEH C18柱分离,多反应监测(MRM)模式进行定量与定性分析,外标法定量。结果表明,11种目标物在各自的线性响应范围内线性关系良好,相关系数(r)≥0.9918,定量限(LOQ)为0.1~20.0μg/kg,加标平均回收率(n=3)为62.8%~115.3%,相对标准偏差(RSD)为2.6%~19.0%。该方法前处理简单、净化效果好、灵敏度高、重现性好,适合于水产品中痕量真菌毒素的多残留快速检测。     

超高效液相色谱-串联质谱法测定牛奶中24 种真菌毒素

运用基质分散固相萃取净化,建立牛奶中24 种真菌毒素（黄曲霉毒素B1、黄曲霉毒素B2、黄曲霉毒素G1、黄曲霉毒素G2、黄曲霉毒素M1、赭曲霉毒素A、玉米赤霉烯酮、玉米赤霉酮、α-玉米赤霉烯醇、β-玉米赤霉烯醇、α-玉米赤霉醇、β-玉米赤霉醇、T-2毒素、HT-2霉素、伏马毒素B1、伏马毒素B2、伏马毒素B3、脱氧雪腐镰刀菌烯醇、3-乙酰脱氧雪腐镰刀菌烯醇、15-乙酰脱氧雪腐镰刀菌烯醇、交链孢霉单甲基醚、交链孢酚、腾毒素、细交链孢菌酮酸）多残留检测的超高效液相色谱-串联质谱检测方法。样品经80%乙腈溶液（体积分数）提取,通过基质分散固相萃取净化,氮吹至近干,1 mL 50%乙腈溶液（体积分数）复溶,采用超高效液相色谱-串联质谱进行测定。经ACQUITY UPLC HSS T3反相柱（2.1 mm×100 mm,1.8 μm）分离,梯度洗脱,采用电喷雾离子源-多反应监测模式采集。24 种目标物的相关系数（R2）均大于0.985,加标回收率为71.0%～123.0%,相对标准偏差均小于10%。该方法具有操作简单、重复性好、灵敏度高、杂质干扰小等特点,可以用于牛奶中24 种真菌毒素的检测。     

基于UPLC-MS-MS技术定量确证小麦中10种真菌毒素

建立了小麦中黄曲霉毒素B_1、黄曲霉毒素B_2、黄曲霉毒素G_1、黄曲霉毒素G_2、脱氧雪腐镰刀菌烯醇、雪腐镰刀菌烯醇、3-乙酰脱氧雪腐镰刀菌烯醇、脱氧雪腐镰刀菌烯醇-3-葡萄糖苷、15-乙酰脱氧雪腐镰刀菌烯醇和玉米赤霉烯酮等10种真菌毒素的超高液相色谱-三重四级杆串联质谱法检测的方法。小麦样品经乙腈-水-乙酸溶液震荡超声提取后,采用多功能净化柱净化。待测物经Kinetex SB-C_(18)色谱柱分离,甲醇-0.1%甲酸为流动相,梯度洗脱,正负模式同时扫描,三重串联四级杆质谱多反应离子监测(MRM)方式检测,基质标准校正,外标法定量。结果表明,在一定的浓度范围内,10种真菌毒素线性关系良好,相关系数均大于0.999,方法的检出限为0.015~1μg/kg,空白样品中添加高中低不同浓度的真菌毒素的回收率为65.12%~89.16%,RSD%(n=6)在4.26%~9.46%之间。该方法分析速度快、重复性好、灵敏度高,适合小麦中多种真菌毒素的高灵敏度快速测定。     

免疫亲和柱净化-HPLC法测定小麦粉中的黄曲霉毒素B_1、玉米赤霉烯酮和脱氧雪腐镰刀菌烯醇的含量

建立了免疫亲和柱净化-高效液相色谱法测定小麦粉中黄曲霉毒素B1(AFB1)、玉米赤霉烯酮(ZEN)、脱氧雪腐镰刀菌烯醇(DON)的方法。小麦粉样品经乙腈-水振荡提取,三合一免疫亲和柱净化后,采用双通道荧光检测器串联光化学衍生器同时测定黄曲霉毒素B1和玉米赤霉烯酮,二极管阵列检测器测定脱氧雪腐镰刀菌烯醇。样品中各真菌毒素平均加标回收率为74.8%~105.2%,相对标准偏差为1.96%~6.26%。此方法可用于实验室开展小麦中3种真菌毒素含量的检测。     

UPLC-MS/MS法测定玉米种13种真菌毒素

建立了超高压液相色谱串联质谱法（UPLC-MS/MS）测定玉米中脱氧雪腐镰刀菌烯醇及其乙酰化衍生物、玉米赤霉烯酮、黄曲霉毒素B1/B2/G1/G2、伏马毒素B1/B2、赭曲霉毒素A、T-2和HT-2等13种真菌毒素的分析方法。样品采用乙腈︰水︰乙酸（80︰19︰1,体积比）提取后,经过稀释、离心和过滤的前处理操作即可进行仪器测定。结果表明,13种真菌毒素的定量限在1~200 μg/kg之间,三个浓度添加水平回收率为80%~114%,相对标准偏差为0.9%~10.9%,基体标准物质测定结果均在标准值±不确定度的范围内。     

QuEChERS-高效液相色谱-质谱法检测食品中14 种真菌毒素

建立QuEChERS-高效液相色谱-质谱检测食品中14 种真菌毒素的方法。均质样品用1%乙酸-乙腈提取,经分散固相萃取净化后,采用ACQUITU UPLC BEH C18色谱柱（2.1 mm×50 mm,1.7 μm）分离。采用电喷雾电离、多反应监测方式,可同时对食品中脱氧雪腐镰刀菌烯醇、青霉酸、黄曲霉毒素M1、黄曲霉毒素G2、桔青霉毒素、黄曲霉毒素B1、黄曲霉毒素B2、黄曲霉毒素G1、玉米赤霉烯酮、赭曲霉毒素A、杂色曲霉毒素、HT-2毒素、T-2毒素、鬼臼毒素14 种真菌毒素进行定性和定量分析。最低检出限为0.5～1 μg/kg。该方法简便快速、选择性佳、灵敏度高,适用于食品安全事件分析中真菌毒素的分析。     

超高效液相色谱串联质谱法检测谷物中8种真菌毒素

建立了液质联用法同时测定脱氧雪腐镰刀菌烯醇、3-乙酰基脱氧雪腐镰刀菌烯醇、15-乙酰基脱氧雪腐镰刀菌烯醇、黄曲霉毒素B_1、B_2、G_1、G_2、玉米赤霉烯酮共8种真菌毒素谷物中的含量。样品经乙腈-水溶液提取,通过多功能净化柱净化、Waters Acquity UPLC? BEH C18色谱柱分离、超高效液相色谱串联质谱系统测定,脱氧雪腐镰刀菌烯醇及其衍生物同位素内标法定量,黄曲霉毒素和玉米赤霉烯酮外标法定量。结果表明,8种真菌毒素在线性范围内线性相关性R~2≥0.999,检出限在0.3~1.0μg/kg之间,加标回收率在72.2%~101.7%之间,相对标准偏差在1.22%~9.69%之间。该方法操作简单、灵敏度高、回收率好,适用于谷物及其制品中多种真菌毒素的同时检测。     

大米中16种真菌毒素同时检测分析

目的建立大米中黄曲霉毒素、伏马毒素、雪腐镰刀菌烯醇、脱氧雪腐镰刀菌烯醇类毒素、玉米赤霉烯酮、赭曲霉毒素A、T-2毒素、HT-2毒素以及杂色曲霉毒素等16种真菌毒素便捷准确的液相色谱-串联质谱法。方法大米样品经粉碎均质后采用70%甲醇水溶液浸泡提取,通过PriboFastRM226多功能净化柱净化,利用液相色谱串联质谱的多反应监测模式进行测定分析,采用内标法定量。结果 16种真菌毒素均具有良好的线性关系(r0.99),3个加标水平回收率为85.2%～102.8%,相对标准偏差范围为2.05%～4.75%。在61件大米检测中,共有5件样品检出真菌毒素,检测到的真菌毒素有5种,其中雪腐镰刀菌烯醇、伏马毒素B_1、伏马毒素B_2、15-乙酰基脱氧雪腐镰刀菌烯醇各有1件样品检出,黄曲霉毒素B_1有3件检出,检出率为8.33%,检出的5种真菌毒素含量在0.69～71.47μg/kg,均未超过国家食品安全标准规定的真菌毒素限量标准。结论大米中真菌毒素的检出率低,含量符合国家标准要求,该检测方法准确、可靠、便捷,可适用于大米中多种真菌毒素的检测。     

UPLC-MS/MS法测定玉米中13种真菌毒素

建立了超高压液相色谱串联质谱法(UPLC-MS/MS)测定玉米中脱氧雪腐镰刀菌烯醇及其乙酰化衍生物、玉米赤霉烯酮、黄曲霉毒素B1/B2/G1/G2、伏马毒素B1/B2、赭曲霉毒素A、T-2和HT-2等13种真菌毒素的分析方法。样品采用乙腈∶水∶乙酸(80∶19∶1,V/V/V)提取后,经过稀释、离心和过滤的前处理操作即可进行仪器测定。结果表明,13种真菌毒素的定量限在1~200μg/kg之间,3个浓度添加水平回收率为80%~114%,相对标准偏差为0.9%~10.9%,基体标准物质测定结果均在标准值±不确定度的范围内。     

免疫亲和层析及其在真菌毒素检测中应用

该文简介免疫亲和层析工作原理,载体要求与选择,免疫亲和柱制备与使用,重点综述免疫亲和层析在黄曲霉毒素,赭曲霉毒素,玉米赤霉烯酮,脱氧雪腐镰刀菌烯醇,伏马毒素,T-2毒素等真菌毒素检测中应用最新进展。     

Reliable identification of grapevine rootstock varieties using RAPD PCR on woody samples

Since grapevine ( Vitis spp .) rootstock material is being traded increasingly as disbudded woody material a lack of distinctive morphological features on such material necessitates an alternative and reliable means of identification. Methods described here were developed for rapid and efficient extraction of DNA from woody samples rich in phenolic compounds and polysaccharides, and for subsequent identification of varieties by RAPD PCR. Using these methods, and with the application of only one selected RAPD primer, we were able to differentiate sixteen rootstock varieties, including the seven varieties most commonly used in Germany. Problems commonly encountered with reproducibility of RAPD patterns were avoided by choosing primers with a dinucleotide sequence and a high G/C content that allowed a rather high annealing temperature of 45°C. Methods described here should also be useful for other horticultural crops, especially those with woody tissues rich in phenolic compounds and polysaccharides.     

An internet compendium of analytical methods and spectroscopic information for monomers and additives used in food packaging plastics

An internet website (http://cpf.jrc.it/smt/) has been produced as a means of dissemination of methods of analysis and supporting spectroscopic information on monomers and additives used for food contact materials (principally packaging). The site which is aimed primarily at assisting food control laboratories in the European Union contains analytical information on monomers, starting substances and additives used in the manufacture of plastics materials. A searchable index is provided giving PM and CAS numbers for each of 255 substances. For each substance a data sheet gives regulatory information, chemical structures, physico-chemical information and background information on the use of the substance in particular plastics, and the food packaging applications. For monomers and starting substances (155 compounds) the infra-red and mass spectra are provided, and for additives (100 compounds); additionally proton NMR are available for about 50% of the entries. Where analytical methods have been developed for determining these substances as residual amounts in plastics or as trace amounts in food simulants these methods are also on the website. All information is provided in portable document file (PDF) format which means that high quality copies can be readily printed, using freely available Adobe Acrobat Reader software. The website will in future be maintained and up-dated by the European Commission's Joint Research Centre (JRC) as new substances are authorized for use by the European Commission (DG-ENTR formerly DGIII). Where analytical laboratories (food control or other) require reference substances these can be obtained free-ofcharge from a reference collection housed at the JRC and maintained in conjunction with this website compendium.     

Aroma characterization of various apricot varieties using headspace–solid phase microextraction combined with gas chromatography–mass spectrometry and gas chromatography–olfactometry

The characterization of the aromatic profile of several apricot cultivars with molecular tracers in order to obtain objective data concerning the aromatic quality of this fruit was undertaken using headspace–solid phase microextraction (HS–SPME). Six apricot cultivars were selected according to their organoleptic characteristics: Iranien, Orangered, Goldrich, Hargrand, Rouge du Roussillon and A4025. The aromatic intensity of these varieties measured by HS–SPME–Olfactometry were defined and classified according to the presence and the intensity of grassy, fruity and apricot like notes. In the six varieties, 23 common volatile compounds were identified by HS–SPME–GC–MS. Finally, 10 compounds, ethyl acetate, hexyl acetate, limonene, β-cyclocitral, γ-decalactone, 6-methyl-5-hepten-2-one, linalool, β-ionone, menthone and (E)-hexen-2-al were recognized by HS–SPME–GC–O as responsible of the aromatic notes involved in apricot aroma and considered as molecular tracers of apricot aromatic quality which could be utilized to discriminate apricot varieties.     

Tests of potential functional barriers for laminated multilayer food packages. Part I: Low molecular weight permeants

The advent of the functional barrier concept in food packaging has brought with it a requirement for fast tests of permeation through potential barrier materials. In such tests it would be convenient for both foodstuffs and materials below the functional barrier (sub-barrier materials) to be represented by standard simulants. By means of inverse gas chromatography, liquid paraffin spiked with appropriate permeants was considered as a potential simulant of sub-barrier materials based on polypropylene (PP) or similar polyolefins. Experiments were performed to characterize the kinetics of the permeation of low molecular weight model permeants (octene, toluene and isopropanol) from liquid paraffin, through a surrogate potential functional barrier (25 μm-thick oriented PP) into the food simulants olive oil and 3% (w/v) acetic acid. These permeation results were interpreted in terms of three permeation kinetic models regarding the solubility of a particular model permeant in the post-barrier medium (i.e. the food simulant). The results obtained justify the development and evaluation of liquid sub-barrier simulants that would allow flexible yet rigorous testing of new laminated multilayer packaging materials.     

Chlorohydrins of bisphenol A diglycidyl ether (BADGE) and of bisphenol F diglycidyl ether (BFDGE) in canned foods and ready-to-drink coffees from the Japanese market

BADGE.2HCl and BFDGE.2HCl were determined in 28 samples of ready-to-drink canned coffee and 18 samples of canned vegetables (10 corn, 5 tomatoes and 3 others), all from the Japanese market. HPLC was used as the principal analytical method and GCMS for confirmation of relevant LC fractions. BADGE.2HCl was found to be present in one canned coffee and five samples of corn, BFDGE.2HCl in four samples of canned tomatoes and in one canned corn. No sample was found which exceeded the 1mg/kg limit of the EU for the BADGE chlorohydrins. However the highest concentration was found for the sum of BFDGE.2HCl and BFDGE.HCl.H₂O at a level of 1.5mg/kg. A Beilstein test confirmed that all cans containing foods contaminated with BADGE.2HCl or BFDGE.2HCl had at lest one part coated with a PVC organosol.     

European priorities for research to support legislation in the area of food contact materials and articles

A strong science base is required to underpin the planning and decision-making process involved in determining future European community legislation on materials and articles in contact with food. Significant progress has been made in the past 5 years in European funded work in this area, with many developments contributing to a much better understanding of the migration process, and better and simpler approaches to food control. In this paper this progress is reviewed against previously identified work-areas (identified in 1994) and conclusions are reached about future requirements for R&D to support legislation on food contact materials and articles over the next 5 or so years.     

Analysis of benzo[a]pyrene in spiked fatty foods by second derivative synchronous spectrofluorimetry after microwave-assisted treatment of samples

A simple, rapid and inexpensive method has been developed for the determination of benzo[a     

The development of reference materials for paralytic shellfish poisoning toxins in lyophilized mussel. II: Certification study

This paper describes the second part of a project undertaken to develop certified mussel reference materials for paralytic shellfish poisoning toxins. In the first part two interlaboratory studies were undertaken to investigate the performance of the analytical methodology for several PSP toxins, in particular saxitoxin and decarbamoyl-saxitoxin in lyophilized mussels, and to set criteria for the acceptance of results to be applied during the certification exercise. Fifteen laboratories participated in this certification study and were asked to measure saxitoxin and decarbamoyl-saxitoxin in rehydrated lyophilized mussel material and in a saxitoxin-enriched mussel material. The participants were allowed to use a method of their choice but with an extraction procedure to be strictly followed. The study included extra experiments to verify the detection limits for both saxitoxin and decarbamoyl-saxitoxin. Most participants (13 of 15) were able to meet all the criteria set for the certification study. Results for saxitoxin.2HCl yielded a certified mass fraction of <0.07 mg/kg in the rehydrated lyophilized mussels. Results obtained for decarbamoyl-saxitoxin.2HCl yielded a certified mass fraction of 1.59+/-0.20 mg/kg. The results for saxitoxin.2HCl in enriched blank mussel yielded a certified mass fraction of 0.48 +/- 0.06 mg/kg. These certified reference materials for paralytic shellfish poisoning toxins in lyophilized mussel material are the first available for laboratories to test their method for accuracy and performance.     

Announcing a new international peer-reviewed journal:Food Science and Human Wellness now accepting manuscript submission in English

<正>We are pleased to announce the launch of a new international peer-reviewed journal-Food Science and Human Wellness,ISSN 2213-4530,which is an open access journal,produced and hosted by Elsevier B.V.on behalf of Beijing Academy of Food Sciences.Food Science and Human Wellness is an international peer-reviewed English journal that provides a forum for the dissemination of the