Similarity solutions for slender dry patches with thermocapillarity

The lubrication approximation is used to investigate slender dry patches in an infinitely wide film of viscous fluid flowing steadily on an inclined plane that is either heated or cooled relative to the surrounding atmosphere. Four non-isothermal situations in which thermocapillary effects play a significant role are considered.Similarity solutions describing a thermocapillary-driven flow with a dry patch that is widening or narrowing due to either gravitational or surface-tension effects on a non-uniformly heated or cooled substrate are obtained, and examples of these solutions, when the substrate temperature gradient depends on the longitudinal coordinate according to a general power law, are presented. When gravitational effects are strong, the solution contains a free parameter, and for each value of this parameter there is a unique solution representing both a narrowing pendent dry patch and a widening sessile dry patch, whose transverse profile has a monotonically increasing shape. When surface-tension effects are strong, the solution also contains a free parameter, and for each value of this parameter there is both a unique solution representing a narrowing dry patch, whose transverse profile has a monotonically increasing shape, and a one-parameter family of solutions representing a widening dry patch, whose transverse profile has a capillary ridge near the contact line and decays in an oscillatory manner far from it.Similarity solutions are also obtained for both a gravity-driven and a constant-surface-shear-stress-driven flow with a dry patch that is widening or narrowing due to thermocapillarity on a uniformly heated or cooled substrate. The solutions in both cases contain a free parameter, and for each value of this parameter there is a unique solution representing both a narrowing dry patch on a heated substrate and a widening dry patch on a cooled substrate, whose transverse profile has a monotonically increasing shape.     

Filling the Radon domain in computed tomography by local convex combination

Radon data interpolation is a necessary procedure in computed tomography (CT), especially for reconstruction from divergent beam scanning. In a polar-grid representation, the Radon data of a fanbeam projection are populated on an arc, rather on a radial line. Collectively, the Radon data generated from a fanbeam CT system are unevenly populated: The population becomes sparser as the polar distance increases. In CT reconstruction, the Fourier central slice theorem requires a radial scanline full of Radon data. Therefore the vacant entries of a scanline must be filled by interpolation. In addition, interpolation is also required in polar-to-Cartesian conversion. In this paper we propose a practical interpolation technique for filling the vacant entries by local convex combination. It is a linear interpolant that generates a value for a grid point from the available data lying in its neighborhood, by a weighted average, with the weights corresponding to the inverse distances. In fact, the linear convex combination serves as a general flat-smoothing operation in filling a vacancy. Specifically, this technique realizes a variety of linear interpolations, including nearest-neighbor replication, two-point collinear, three-point triangulation, and four-point quadrilateral, and local extrapolation, in a unified framework. Algorithms and a simulation demonstration are provided.     

Photon-echo novelty filter for measuring a sudden change in index of refraction

An optical novelty filter with phase-conjugate photon echoes is constructed to measure a sudden change in the index of refraction of a transparent medium. This novelty filter is set up as a Michelson interferometer and employs a europium-doped crystal as a phase-conjugate mirror. The filter is sensitive to the sudden change in index of refraction when the phase-conjugate echo experiences a different path length from the first laser excitation pulse in a photon-echo experiment. Using a Pockels cell as a pure phase modulator, we demonstrate that the filter can resolve a sudden phase change occurring on a nanosecond time scale with an accuracy and resolution close to 5°.     

A computer-assisted range image registration system for nuclearwaste cleanup

Building a three-dimensional (3-D) computer-based representation of a large or complex scene from a set of range images requires assembling the range images so that they are spatially registered. This paper will present a technique for finding a homogeneous transformation between a pair of range images while making use of both range and intensity information obtained using a laser range scanner. A demonstrated application featuring this technique consists of building a 3-D representation of a nuclear dumpsite, which then serves to help control a teleoperated nuclear waste remediation system     

Pd-C高温共晶点复现装置研制

主要针对Pd-C高温共晶点复现装置的组成进行介绍,其中包括复现用高温均热炉炉体、温度控制系统、真空泵、充气保护装置、水冷系统、复现用的石墨坩埚、二等B型标准热电偶和Pt-Pd热电偶等。针对石墨坩埚的灌注和共晶点复现过程进行了描述,根据复现的试验数据进行了相应的分析。     

On the Elastic Coupling Through the Flux Lines and Magnetic Interaction

It is defined the magnetic interaction energy between two superconductor pieces situated in a magnetic field by using the elastic coupling through the flux lines. On this basis, it is shown that a force between a superconducting material and a source of magnetic field is always repulsive, the force between a ferromagnetic material and a source of magnetic field is always attractive and a force between a normal metal and a source of time-varying magnetic field is always repulsive.     

Image segmentation of a color-blindness plate

One way of testing color vision is with a color-blindness plate (CBP) consisting of a set of brilliant colored dots to form a pattern (a figure) and a set of other colored dots to form a background. Classification of such a type of color image into a pattern and a background with a traditional technique is difficult. Based on a self-organizing feature map and a labeling process as well as spatial distance computation, an effective approach to the segmentation of a CBP image is presented. We describe the principle of a CBP segmentation and then introduce the CBP. The proposed approach is described, and its experimental results are presented. We conclude that the method can segment the CBP image into a pattern and a background successfully.     

并联机床的动力学特性对加工精度影响的分析

为了提高并联机床的加工精度,分析了并联机床的动力学特性对加工精度的影响。根据牛顿—欧拉方程,得到并联机床的动力学方程,解得连杆的驱动力;根据杆件轴向伸长量与受力之间的关系,得到连杆的长度误差;以无长度误差的连杆长度为优化目标,用优化的方法,得到动平台的位姿,并与连杆有长度误差时动平台的位姿比较,得动平台的位姿误差;根据刀具在动平台坐标系中位置,得刀具加工位置误差及对被加工零件精度的影响。结果表明：并联机床连杆的长度误差,引起刀具加工位置误差,使被加工零件产生形位误差和尺寸误差;并联机床电主轴偏心引起连杆的长度误差的扰动,产生刀具加工位置的扰动误差,影响被加工零件的表面粗糙度。     

Electrical switching of the vortex core in a magnetic disk

A magnetic vortex is a curling magnetic structure realized in a ferromagnetic disk, which is a promising candidate for a memory cell for future non-volatile data-storage devices. Thus, an understanding of the stability and dynamical behaviour of the magnetic vortex is a major requirement for developing magnetic data-storage technology. Since the publication of experimental proof for the existence of a nanometre-scale core with out-of-plane magnetization in a magnetic vortex, the dynamics of vortices have been investigated intensively. However, a way to electrically control the core magnetization, which is a key for constructing a vortex-core memory, has been lacking. Here, we demonstrate the electrical switching of the core magnetization by using the current-driven resonant dynamics of the vortex; the core switching is triggered by a strong dynamic field that is produced locally by a rotational core motion at a high speed of several hundred metres per second. Efficient switching of the vortex core without magnetic-field application is achieved owing to resonance. This opens up the potentiality of a simple magnetic disk as a building block for spintronic devices such as a memory cell where the bit data is stored as the direction of the nanometre-scale core magnetization.     

Unstable resonator with reduced output coupling

The properties of a laser beam coupled out of a standard unstable laser resonator are heavily dependent on the chosen resonator magnification. A higher magnification results in a higher output coupling and a better beam quality. But in some configurations, an unstable resonator with a low output coupling in combination with a good beam quality is desirable. In order to reduce the output coupling for a particular resonator, magnification fractions of the outcoupled radiation are reflected back into the cavity. In the confocal case, the output mirror consists of a spherical inner section with a high reflectivity and a flat outer section with a partial reflectivity coating. With the application of the unstable resonator with reduced output coupling (URROC), magnification and output coupling can be adjusted independently from each other and it is possible to get a good beam quality and a high power extraction for lasers with a large low gain medium. The feasibility of this resonator design is examined numerically and experimentally with the help of a chemical oxygen iodine laser.     

A case-based reasoning approach toward developing a belief about the cost of concept

It is generally acknowledged that product development involves a sequence of decision making under uncertainty, including setting target requirements for a new product, selecting product concept, and developing conceptual and detailed design of a chosen concept. To select a product concept, engineers need to assess the uncertainty of a future market share, market size, and a cost of concept (cost of the final product developed from a concept). This paper proposes a case-based reasoning (CBR) approach to model beliefs about the uncertainty of a cost of concept. The proposed CBR approach consists of storing information about various products in a knowledge-base, defining a new product concept, retrieving a cluster of products in the knowledge-base that are highly similar to the concept, and adapting the cost of the retrieved product to construct a distribution of the cost of concept. This paper illustrates the proposed approach using printers as an example.     

Design of pitch conversion component for formation of multibeam optical recording head

We describe a design of a planar lightwave circuit for parallel information processing using visible light. The circuit serves as a pitch conversion component (PCC) that can align multiple beams close together and easily composes a compact optical system that can project optical spots at a narrow pitch on a certain small plane. From the viewpoint of its application to optical recording, a PCC is designed to have over 50 waveguides according to the fabrication of waveguides for a blue-violet beam. It is analytically confirmed that a PCC contributes to the formation of a multibeam optical recording head with numerous beams.     

Fluctuational electromagnetic interaction between a moving particle and a flat surface covered with a thin adsorbed film

The effect of a thin adsorbed film on the fluctuational electromagnetic tangential force of interaction between a moving nanoparticle and a flat solid surface was theoretically studied for the first time in a nonrelativistic approximation. Particular calculations were performed for a metal film on a dielectric and for a dielectric film on a metal. In both cases, the nanoparticle is assumed to be made of a nonmagnetic metal. It is shown that, at a normal temperature, the presence of an adsorbed film may lead to an increase in the tangential friction force by one or two orders of magnitude for a certain relation between the particle distance from the surface and the film thickness. In the case of a dielectric film on a metal substrate, a decrease in the temperature is accompanied by exponential decrease in the viscous friction. For a metal film on a dielectric substrate, the tangential force exhibits a quadratic dependence on the temperature.     

No-slip images of certain line singularities in a circular cylinder

The no-slip images of a line rotlet, a Stokeslet, a potential source and a potential doublet in a circular cylinder are obtained. It is shown that the far field is either a uniform flow or an eccentric rotational flow. Consequently, the uniform flow past a cylinder or an eccentric rotational flow around a cylinder becomes a well-posed problem if a singularity of a suitably chosen strength is present in the flow field.     

Reusable platforms for high-throughput on-chip temperature gradient assays

This paper describes a reusable platform that can apply a linear temperature gradient to a lab-on-a-chip device. When a planar microfluidic device with a series of microchannels is placed on top of the platform with the channels perpendicular to the gradient, each channel is held at a discrete temperature. This allows temperature-dependent data for chemical or biochemical species flowed into the device to be obtained in a concurrent fashion. As a demonstration, a melting curve for dsDNA is performed by collecting all the data simultaneously. The gradient is stable enough to easily distinguish between 30-mers where the complement strand contains a single C-A mismatch or a single T-G mismatch or is a perfect match. On the other hand, a temperature gradient can be formed parallel to the direction of flow of the microchannels. This allows the temperature in each channel to vary continuously as the liquid flows downstream. If each microchannel in the array contains a distinct pH value, ionic strength, species concentration, or chemical composition, then a high-throughput two-variable experiment can be performed. We demonstrate this mode of data collection by measuring the fluorescence yield of fluorescein dye molecules in aqueous solution simultaneously as a function of concentration and temperature.     

Unidirectional single-mode Nd:YAG laser with a planar semimonolithic ring cavity

Unidirectional single-mode operation of a diode-pumped Nd:YAG laser with a planar semimonolithic ring cavity has been demonstrated at 1064 nm. The semimonolithic cavity consists of a laser active medium placed in a magnetic field, a crystal quartz plate, and an output coupling mirror, which form an optical diode by acting as a Faraday rotator, a reciprocal polarization rotator, and a partial polarizer, respectively. A single-mode output power of 155 mW and a slope efficiency of 17% were obtained with a 1.2-W diode laser at 809 nm. A laser linewidth of less than 100 kHz is inferred from a beat note frequency spectrum between two identical laser systems and continuous tuning to greater than 2 GHz was observed.     

摩擦调节剂抑制钢轨波磨的机理研究

基于轮轨之间的摩擦耦合自激振动引起钢轨波磨的观点,论文建立了车辆稳态通过小半径曲线时由轮对－钢轨－轨枕组成的轮轨系统有限元弹性振动摩擦自激振动有限元模型,用ABAQUS软件对该模型的运动稳定性进行了分析,重点研究了轮轨摩擦系数和蠕滑力-蠕滑率曲线负斜率对轮轨系统摩擦自激振动的影响。计算结果显示,轮轨摩擦系数对轮轨摩擦自激振动有重要影响,当控制摩擦系数 时可以消除钢轨磨耗型波磨,蠕滑力-蠕滑率曲线负斜率对钢轨波磨有显著影响。     

Loss factors of mirrors for a gravitational wave antenna

Low-loss mirrors fabricated by ion-beam-sputtering machines for possible application in an interferometric gravitational wave antenna were evaluated by use of Nd:YAG laser light (lambda = 1064 nm) with two distinct measurements: a tabletop experiment that used a short cavity with a small beam with a beam waist of approximately 2w(0) = 0.82 mm, and an optical test that used a 20-m prototypical gravitational-wave detector with a large beam with a beam waist of approximately 2w(0) = 4.4 mm. A multilayer coating comprised 29 layers of SiO(2)/Ta(2)O(5) and one protective coating of SiO(2). The best values obtained as a result of these measurements were 16 ppm (parts in 10(6)) and 30 ppm in total loss, respectively. Also, a two-dimensional loss map generated by use of a small beam successfully revealed the existence of a loss structure within the coating surface. These results imply that a high-reflectance multilayer coating has some inhomogeneities and a loss distribution with a typical scale of a few millimeters and that the total measured losses depend on the beam spot size.     

A general method for analyzing moderately large deflections of a non-uniform beam: an infinite Bernoulli–Euler–von Kármán beam on a nonlinear elastic foundation

The present paper concerns a semi-analytical procedure for moderately large deflections of an infinite non-uniform static beam resting on a nonlinear elastic foundation. To construct the procedure, we first derive a nonlinear differential equation of a Bernoulli–Euler–von Kármán “non-uniform” beam on a “nonlinear” elastic foundation, where geometrical nonlinearities due to moderately large deflection and beam non-uniformity are effectively taken into account. The nonlinear differential equation is transformed into an equivalent system of nonlinear integral equations by a canonical representation. Based on the equivalent system, we propose a method for the moderately large deflection analysis as a general approach to an infinite non-uniform beam having a variable flexural rigidity and a variable axial rigidity. The method proposed here is a functional iterative procedure, not only fairly simple but straightforward to apply. Here, a parameter, called a base point of the method, is also newly introduced, which controls its convergence rate. An illustrative example is presented to investigate the validity of the method, which shows that just a few iterations are only demanded for a reasonable solution.     

约束最优化问题中一个全局误差界及其应用

本文利用信赖域方法中的几个特征量(由预测下降量给出的价值函数与信赖域半径等),在目标函数的梯度向量是强单调的条件下,为约束最优化问题的可行解与最优解之间的距离提供了一个全局误差界。我们利用误差界得出了可行解点列收敛于最优解的充分条件和可行解点列收敛到KT点的必要条件。最后,还给出了可行解点列至KT点集的距离趋于零的必要条件。