Nash bargaining solution based multi-cell and multi-user interference alignment scheme for cellular networks

In wireless cellular networks, the interference alignment （IA） is a promising technique for interference management. A new IA scheme for downlink cellular network with multi-cell and multi-user was proposed, in the proposed scheme, the interference in the networks is divided into inter-cell interference （ICI） among cells and inter-user interference （IUI） in each cell. The ICI is aligned onto a multi-dimensional subspace by multiplying the ICI alignment precoding matrix which is designed by the singular value decomposition （SVD） scheme at the base station （BS） side. The aligned ICI is eliminated by timing the interference suppression matrix which is designed by zero-forcing （ZF） scheme at the user equipment （UE） side. Meanwhile, the IUI is aligned by multiplying the IUI alignment precoding matrix which is designed based on Nash bargaining solution （NBS） in game theory. The NBS is solved by the particle swarm optimization （PSO） method. Simulations show that, compared with the traditional ZF IA scheme, the proposed scheme can obtain higher data rate and guarantee the data rate fairness of UEs with little additional complexity.     

Synthesis of Amphiphilic Copolymers of Poly(ethylene oxide) and Poly(ϵ‐caprolactone) with Different Architectures,and Their Role in the Preparation of Stealthy Nanoparticles

Well‐defined copolymers of biocompatible poly(?‐caprolactone) (PCL) and poly(ethylene oxide) (PEO) are synthesized by two methods. Graft copolymers with a gradient structure are prepared by ring‐opening copolymerization of ?‐caprolactone (?CL) with a PEO macromonomer of the ?CL‐type. The ?CL polymerization is initiated by a PEO macroinitiator to prepare diblock copolymers. These amphiphilic copolymers are used as stabilizers for biodegradable poly(D,L ‐lactide) (PLA) nanoparticles prepared by a nanoprecipitation technique. The effect of the copolymer characteristic features (architecture, composition, and amount) on the nanoparticle formation and structure is investigated. The average size, size distribution, and stability of aqueous suspensions of the nanoparticles is measured by dynamic light scattering. For comparison, an amphiphilic random copolymer, poly(methyl methacrylate‐co‐methacrylic acid) (P(MMA‐co‐MA)), is synthesized. The stealthiness of the nanoparticles is analyzed in relation to the copolymer used as stabilizer. For this purpose, the activation of the complement system by nanoparticles is investigated in vitro using human serum. This activation is much less important whenever the nanoparticles are stabilized by a PEO‐containing copolymer rather than by the P(MMA‐co‐MA) amphiphile. The graft copolymers with a gradient structure and the diblock copolymers with similar macromolecular characteristics (molecular weight and hydrophilicity) are compared on the basis of their capacity to coat PLA nanoparticles and to make them stealthy.     

A novel TFS-IGBT with a super junction floating layer

A novel trench field stop (TFS) IGBT with a super junction (SJ) floating layer (SJ TFS-IGBT) is proposed.This IGBT presents a high blocking voltage (>1200 V), low on-state voltage drop and fast turn-off capability. A SJ floating layer with a high doping concentration introduces a new electric field peak at the anode side and optimizes carrier distribution, which will improve the breakdown voltage in the off-state and decrease the energy loss in the on-state/switching state for the SJ TFS-IGBT. A low on-state voltage (VF) and a high breakdown voltage (BV) can be achieved by increasing the thickness of the SJ floating layer under the condition of exact charge balance. A low turn-off loss can be achieved by decreasing the concentration of the P-anode. Simulation results show that the BV is enhanced by 100 V, VF is decreased by 0.33 V (at 100 A/cm2) and the turn-off time is shortened by 60%, compared with conventional TFS-IGBTs.     

Experiments on pilot symbol-assisted coherent multistageinterference canceller for DS-CDMA mobile radio

A three-stage coherent multistage interference canceller (COMSIC) employing pilot symbol-assisted (PSA) channel estimation for replica generation of multiple access interference (MAI) is implemented and its performance in the presence of frequency selective multipath fading is experimentally evaluated by a multipath fading simulator. A fast transmission power control (TPC) method suitable for COMSIC is also proposed, in which the signal-to-interference plus background noise power ratio (SIR) at the matched filter (MF) based RAKE receiver is measured to achieve a short TPC delay and the target signal-to-interference ratio value is compensated by an outer loop so that the measured block error rate (BLER) is equal to the prescribed target value. The experimental results show that as expected the COMSIC satisfactorily reduces the MAI even when the number of active users is equal to the spreading factor in a multipath fading environment, and thus, improves the bit error rate (BER) performance in a multiuser environment. The results also show that the proposed fast TPC method with a two-slot delay associated with COMSIC works satisfactorily and the combination of COMSIC and fast TPC significantly decreases the transmission power of a mobile station (required transmission power of a mobile station with COMSIC at the average BER of 10^-3 is decreased by approximately 2.0 (3.0) dB compared with the MF-based RAKE receiver with (without) antenna diversity reception). This extends the cell coverage, battery life, and increases the system capacity in the reverse link     

High resolution image formation from low resolution frames using Delaunay triangulation

An algorithm based on spatial tessellation and approximation of each triangle patch in the Delaunay (1934) triangulation (with smoothness constraints) by a bivariate polynomial is advanced to construct a high resolution (HR) high quality image from a set of low resolution (LR) frames. The high resolution algorithm is accompanied by a site-insertion algorithm for update of the initial HR image with the availability of more LR frames till the desired image quality is attained. This algorithm, followed by post filtering, is suitable for real-time image sequence processing because of the fast expected (average) time construction of Delaunay triangulation and the local update feature.     

GABA(A) receptor modulation in rat cerebellum granule cells

The inhibitory GABA(A) receptor is a key element in determining the pattern of nerve cell electrical activity. Thus, modulation of its function is of paramount impact in shaping neuronal functional activity under physiological and pathological conditions. This applies to cerebellar granule neurons as to all the other neurons in the brain. The culture of cerebellar granules from newborn rats is a convenient means by which to approach these cells for electrophysiological studies provided that they maintain, as far as GABA(A) receptors are concerned, the same characteristics as in situ. Thus, the regulation of GABA(A) receptor activity in these neurons has been studied by the patch-clamp technique, both in the whole-cell and outside-out configuration. An obvious first level of control of such receptors' activity is their desensitization under continued agonist application, with biphasic kinetics. The data do not allow one to conclude whether one is dealing with two different populations of receptors or with a single population with two desensitization phases; although the presence of two GABA(A) receptor populations is suggested by a host of observations. The granule cell GABA(A) receptors are modulated by changes in extracellular pH with lower pH resulting in an enhanced receptor activity. They display, under the conditions of whole-cell recording, a run-down phenomenon which is most probably due to a tyrosine phosphatase activity which is in turn under control by a protein serine kinase. Thus, in situ tyrosine phosphorylation is a key element in determining the efficiency of GABA mediated inhibition. Activation of protein kinase A or protein kinase G (PKG) down-regulates GABA(A) receptors' activity. This last event is involved in the depression of those receptors' activity by L-arginine via the production of nitric oxide. In addition, the activity of calmodulin-activated adenylate cyclase I is controlled by GABA(B) receptors. Dendritic GABA(A) receptor activity is partially blocked by previous activation of N-methyl-D-aspartate (NMDA) receptors via calcineurin mediated dephosphorylation/activation of protein tyrosine phosphatase and concomitant production of nitric oxide and PKG activation. The site phosphorylated by PKG is evidently not available for calcineurin-mediated serine dephosphorylation, due to calcineurin-specific membrane localization in respect of the GABA(A) receptor. Overall, a complex network of biochemical signals appear to keep granule cells GABA(A) receptors under a fine balance between up- and down-regulatory mechanisms. The overall data appear also to indicate the presence of two GABA(A) receptor populations: a dendritic one which can be modulated by Ca++ entering via NMDA receptors and a cell body one. The two populations are probably different in terms of desensitization kinetics and benzodiazepine sensitivity.     

偏振模色散前馈方案中偏振主态研究

前馈偏振模色散（PMD）补偿系统中重要的一项是要精确得到链路中的偏振主态（PSP）方向。通过在实验中加入扰偏器，分别用矢量法和粒子群优化（PSO）算法来拟合实验结果得到椭球，从而用椭球法得出了主态方向。结果表明：矢量法在获得椭球要比PSO算法更精确、速度更快以及所得到PSP方向更准确，其更适合用于前馈补偿方案中。     

太赫兹频段一维介质光子晶体中的史密斯-帕塞尔辐射特性模拟

基于Smith-Purcell(SP)效应,采用粒子模拟的方法探讨了电子束团激发一维介质光子晶体中的SP辐射特性.模拟研究了单个束团激发一维介质圆柱光子晶体产生的SP辐射现象,并对周期束团激发的THz频段的相干SP辐射进行了模拟分析.研究表明,提高介质的相对介电常数和增加光子晶体的层数都可使辐射强度增加,选择合适的参数能够有效地增强THz频段的相干SP辐射强度.     

矩形波导加载光栅结构的太赫兹振荡器

本文采用矩形波导加载光栅的慢波结构作为太赫兹返波管的高频结构,通过理论分析和电磁仿真研究了该慢波结构的色散特性和互作用阻抗,理论分析结果和仿真结果能很好地吻合。在理论分析的基础上,设计了一个中心频率为340GHz的返波管,经粒子模拟软件计算,在较低电流密度的情况下该返波管输出功率达100mW且可调带宽约30GHz。     

Accurate DOA estimation using array antenna with arbitrary geometry

The so called universal steering vector (USV) whose locus is equivalent to the array element pattern is applied to the direction of arrival (DOA) estimation by multiple signal classification (MUSIC) algorithm. It is shown that if the USV which includes the effect of the mutual coupling between the array elements is used, the compensation for the received voltage to remove the effect of the mutual coupling is not required any more. The USV for array antennas with arbitrary geometry is derived and evaluated efficiently by using the method of moments (MoM) so that the DOA estimation can be performed accurately by using the array antenna with arbitrary geometry. Numerical examples of the DOA estimation by a dipole array antenna, and an antenna array composed of a monopole antenna and a planar inverted-F antenna (PIFA) mounted on a mobile handset are presented to demonstrate the effectiveness of the proposed method.     

异号权重模板CNN的似细化特性及其应用

本文发现并以定理的形式证明了具有异号权重模板的细胞神经网络系统在非均匀增益分段性输函数下的细 化稳态性性。     

一种带有超结浮空层的槽栅场阻IGBT

本文提出了一种带有超结浮空层的槽栅场阻IGBT,它具有高的击穿电压(>1200V),低的正向压降和快速的关断能力。高掺杂的 SJ 浮空层在阳极侧引入了电场峰的同时优化了器件内载流子分布,带来关态击穿电压提高,开态、开关态能量损耗减少等好处。在保持电荷平衡的前提下,增加 SJ 浮空层的厚度可以提高击穿电压和降低正向压降,降低 P 型阳极浓度可以减少关断损耗。与传统结构相比,新结构击穿电压提高了100V,正向压降降低了0.33V（电流密度为100A/cm2）,关断时间缩短了60%。     

Improvement of slow light performance for vertical-cavity surface-emitting laser using coupled cavity structure

We propose a vertical cavity semiconductor emitting laser(VCSEL)using a coupled-cavity(CC)design to broaden the bandwidths of gain and delay spectra.The structure is formed by constructing a passive cavity coupled with the active cavity.By rendering the strength of the two resonant cavities,the increased gain bandwidth by 340%and the increased delay bandwidth by 800%are achieved as compared with the signal-cavity(SC)VCSEL.The wideband spectra present more square-like passband which is expected for slow light system.By using it,a 20 Gbit/s super Gaussian signal is delayed by about 13 ps with high quality.     

Characteristics of laser diodes with a partially intermixedGaAs-AlGaAs quantum well

Laser diodes (LD's) with a partially intermixed quantum-well (QW) active layer are fabricated by Zn out-diffusion from a p-cladding layer to the QW region. The dependencies of the degree of intermixing, measured by the photoluminescence (PL) shift, on Zn concentration of the p-cladding layer (P_clad) and the Al content of the guiding layer (X_g) in a separate-confinement-heterostructure (SCH) are investigated. P_clad changes in the range from 1×10 ¹⁸ cm^-3 to 4×10¹⁸ cm^-3 and X_g changes in the range from 0.21-0.37. When P_clad is 2×10¹⁸ cm^-3 and X_g is 0.37, large bandgap energy shift of 96.1 meV is observed. The lasing wavelengths of the LD's, with the partially intermixed QW, are blue-shifted linearly with increasing P_clad and X_g. For the bandgap energy shift of 66.8 meV by PL, the threshold current density is increased by 33% from that of the nonintermixed LD. Reliability of LD's with the partially intermixed QW is investigated for the first time. In spite of a large degree of intermixing the reliability of the LD with the partially intermixed QW of 66.8 meV energy shift by PL is the same as the nonintermixed one, which is confirmed by the aging test of 2500 hours at 45°C with the output power of 1 W under CW operation     

On the use of first-order autoregressive modeling for Rayleigh flat fading channel estimation with Kalman filter

This letter deals with the estimation of a flat fading Rayleigh channel with Jakes's spectrum. The channel is approximated by a first-order autoregressive (AR(1)) model and tracked by a Kalman filter (KF). The common method used in the literature to estimate the parameter of the AR(1) model is based on a correlation matching (CM) criterion. However, for slow fading variations, another criterion based on the minimization of the asymptotic variance (MAV) of the KF is more appropriate, as already observed in few works (Barbieri et al., 2009 [1]). This letter gives analytic justification by providing approximated closed-form expressions of the estimation variance for the CM and MAV criteria, and of the optimal AR(1) parameter.     

Rapid projection MRI of short T(2) species with multiple small angle excitations and oscillatory-rotary field gradients

The use of images weighted by transverse relaxation time T₂ in the identification of pathology in many organ systems is reported. Recent applications by R.C. Hawkes and S. Patz (1987) of steady-state free precision (SSFP) excitation to both static readout gradient (2DFT) and cosinusoidal readout gradient techniques have investigated species with T₂ values on the order of several milliseconds. This work is extended with a one-dimensional cosinusoidal gradient to a two-dimensional projection format through a gradient that simultaneously oscillates and rotates, proposed by S.J. Norton (1987). Each position of interest is encoded (and decoded) during free decay through the unique phase modulation (demodulation) determined by the continuously time-varying gradient. Ideal reconstruction consists of long term integration of the product of the observed signal and a phase demodulation kernel. The approach for a single (or set of independent) FID(s) following a nonselective 90° pulse is modified to image short as well as long T₂ species with the periodic steady state obtained by SSFP excitation     

A new soft recovery PWM quasi-resonant converter with a foldingsnubber network

A new soft recovery (SR) quasi-resonant converter (QRC) having a multiple-order folding snubber network (MFSN) is introduced. It is obtained by combining a normal QRC with a folding snubber network of which the surrounding components are composed of passive devices only (diodes and capacitors). The reverse recovery loss of the main rectifier diode is eliminated by this method utilizing multiple resonance with a multiple-order folding snubber network. By realizing soft switching conditions, the proposed converter has pulsewidth modulation capability with high efficiency and is suitable for high-voltage and high-power DC to DC converter applications     

Understanding and implementation of rapid thermal technologies forhigh-efficiency silicon solar cells

Rapid and potentially low-cost process techniques are analyzed and successfully applied toward the fabrication of high-efficiency monocrystalline Si solar cells. First, a methodology for achieving high-quality screen-printed (SP) contacts is developed to achieve fill factors (FF's) of 0.785-0.795 on monocrystalline Si. Second, rapid emitter formation is accomplished by diffusion under tungsten halogen lamps in both beltline and rapid thermal processing (RTP) systems (instead of in a conventional infrared furnace). Third, a combination of SP aluminum and RTP is used to form an excellent back surface field (BSF) in 2 min to achieve an effective back surface recombination velocity (S_eff) of 200 cm/s on 2.3 Ω-cm Si. Next, a novel dielectric passivation scheme (formed by stacking a plasma silicon nitride film on top of a rapid thermal oxide layer) is developed that reduces the surface recombination velocity (S) to approximately 10 cm/s on the 1.3 Ω-cm p-Si surface. The essential feature of the stack passivation scheme is its ability to withstand short 700-850°C anneal treatments (like the ones used to fire SP contacts) without degradation in S. The stack also lowers the emitter saturation current density (J_oe) of 40 and 90 Ω/sq emitters by a factor of three and ten, respectively, compared to no passivation. Finally, the above individual processes are integrated to achieve (1) >19% efficient solar cells with emitter and Al-BSF formed by RTP and contacts formed by vacuum evaporation and lift-off, (2) 17% efficient manufacturable cells with emitter and Al-BSF formed in a beltline furnace and contacts formed by SP, and (3) 17% efficient gridded-back contact (bifacial) cells with surface passivation accomplished by the stack and gridded front and back contacts formed by SP and cofiring     

Si纳米线阵列波导光栅制备

采用绝缘层上Si(SOI)材料设计制备了3×5纳米线阵列波导光栅(AWG),器件大小为110μm×100μm。利用简单传输法模拟了器件的传输谱,并采用二维时域有限差分(FDTD)模拟中心通道输出光场的稳态分布,模拟结果表明,器件的通道间隔为11 nm,通道间的串扰为18 dB。通过电子束曝光(EBL)和感应耦合等离子(ICP)刻蚀制备了所设计的器件,光输出谱测试分析表明,器件中心通道的片上损耗为9 dB,通道间隔为8.36～10.40 nm,中心输出通道的串扰为6 dB。在误差允许范围内,设计和测试的结果一致。     

一种实用的DF协作无线传感器网络跨层设计

针对前向译码(DF)协作无线传感器网络的特点和要求,探讨基于分集合并和差错控制两种技术的实用跨层设计方案。首先,研究支持DF中继协议的协作传感器网络在目的节点采用等增益合并(EGC)的检测方案。通过和传统的最大比合并(MRC)方案以及最近提出的协作MRC方案综合比较,说明等增益合并是一个具有良好性能的实用方案。然后,把物理层的EGC和数据链路层的自动请求重传(ARQ)结合起来,再进行系统分析。最后,基于EGC和截断ARQ提出一种实用跨层设计方案。