Fabrication and electrical characteristics of Schottky diode based on organic material

The current-voltage (I-V), capacitance-voltage (C-V) and capacitance-frequency (C-f) characteristics of Al/Orange G/n-Si/AuSb structure were investigated at room temperature. A modified Norde’s function combined with conventional forward I-V method was used to extract the parameters including barrier height (BH) and the series resistance. The barrier height and series resistance obtained from Norde’s function was compared with those from Cheung functions, and it was seen that there was a good agreement between series resistances from both methods. The C-V characteristics were performed at 10 kHz and 500 kHz frequencies, and C-f characteristics were performed 0.0 V, +0.4 V and −0.4 V.     

Electrical characteristics and inhomogeneous barrier analysis of Au-Be/p-InSe:Cd Schottky barrier diodes

We have identically prepared Au-Be/p-InSe:Cd Schottky barrier diodes (SBDs) (21 dots) on the InSe:Cd substrate. The electrical analysis of Au-Be/p-InSe:Cd structure has been investigated by means of current-voltage (I-V), capacitance-voltage (C-V) and capacitance-frequency (C-f) measurements at 296 K temperature in dark conditions. The effective barrier heights and ideality factors of identically fabricated Au-Be/p-InSe:Cd SBDs have been calculated from their experimental forward bias current-voltage (I-V) characteristics by applying a thermionic emission theory. The BH values obtained from the I-V characteristics have varied between 0.74 eV and 0.82 eV with values of ideality factors ranging between 1.49 and 1.11 for the Au-Be/p-InSe:Cd SBDs. It has been determined a lateral homogeneous barrier height value of approximately 0.82 eV for these structures from the experimental linear relationship between barrier heights and ideality factors. The Schottky barrier height (SBH) value has been obtained from the reverse-bias C-V characteristics of Au-Be/p-InSe:Cd SBD for only one diode. At high currents in the forward direction, the series resistance effect has been observed. The value of series resistance has been determined from I-V measurements using Cheung’s and Norde’s methods.     

Analysis of interface states and series resistance of MIS Schottky diodes using the current-voltage (I-V) characteristics

The purpose of this paper is to analyze interface states in Al/SiO₂/p-Si (MIS) Schottky diodes and determine the effect of SiO₂ surface preparation on the interface state energy distribution. The current-voltage (I-V) characteristics of MIS Schottky diodes were measured at room temperature. From the I-V characteristics of the MIS Schottky diode, ideality factor (n) and barrier height (Φ_B) values of 1.537 and 0.763 eV, respectively, were obtained from a forward bias I-V plot. In addition, the density of interface states (N_ss) as a function of (E_ss-E_v) was extracted from the forward bias I-V measurements by taking into account both the bias dependence of the effective barrier height (Φ_e), n and R_s for the MIS Schottky diode. The diode shows non-ideal I-V behaviour with ideality factor greater than unity. In addition, the values of series resistance (R_s) were determined using Cheung’s method. The I-V characteristics confirmed that the distribution of N_ss, R_s and interfacial insulator layer are important parameters that influence the electrical characteristics of MIS Schottky diodes.     

Effects of temperature on series resistance determination of electrodeposited Cr/n-Si/Au-Sb Schottky structures

Temperature dependences of the series resistance in the Cr/n-Si/Au-Sb Schottky structures prepared by electrodeposition method have been studied using current-voltage (I-V) characteristics in the 80-320 K temperature range by steps of 20 K. However, the values of series resistance obtained from Cheung functions were compared with each other, and it was seen that there is a good agreement between the values of the series resistance. A modified Norde’s function combined with conventional forward I-V method was used to extract the parameters including barrier height and the series resistance. The barrier height and series resistance obtained from Norde’s function were compared with those from Cheung functions. The values of barrier height and series resistance have very different especially towards to the lower temperatures. This is attributed to non-ideal I-V characteristics of the Cr/n-Si/Au-Sb Schottky structure and non-pure thermionic emission theory due to the low temperature effects.     

Effect of 6 MeV electron irradiation on electrical characteristics of the Au/n-Si/Al Schottky diode

Electron irradiation of the Au/n-Si/Al Schottky diode was performed by using 6 MeV electrons and 3 × 10¹² e⁻/cm² fluency. The current-voltage (I-V), capacitance-voltage (C-V) and capacitance-frequency (C-f) characteristics of the unirradiated and irradiated Schottky diode were analyzed. It was seen that the values of the barrier height, the series resistance, and the ideality factor increased after electron irradiation. However, there was a decrease in the leakage current with electron irradiation. The increase in the barrier height and in the series resistance values was attributed to the dopant deactivation in the near-interface region. The interface states, N_ss, have been decreased significantly after electron irradiation. This was attributed to the decrease in recombination centre and the existence of an interfacial layer. A decrease in the capacitance was observed after electron irradiation. This was attributed to decrease in the net ionized dopant concentration with electron irradiation.     

Temperature dependent electrical and dielectric properties of Sn/p-Si metal-semiconductor (MS) structures

In this study, we investigated temperature dependent electrical and dielectric properties of the Sn/p-Si metal-semiconductor (MS) structures using capacitance-voltage (C-V) and conductance-voltage (G/ω-V) characteristics in the temperature range 80-400 K. The dielectric constant (ε′), dielectric loss (ε′′), dielectric loss tangent (tan δ) and ac electrical conductivity (σ_ac) were calculated from the C-V and G/ω-V measurements and plotted as a function of temperature. The values of the ε′, ε′′, tan δ and σ_ac at low temperature (=80 K) were found to be 0.57, 0.37, 0.56 and 1.04 × 10⁻⁷, where as the values of the ε′, ε′′, tan δ and σ_ac at high temperature (=400 K) were found to be 0.75, 0.44, 0.59 and 1.21 × 10⁻⁶, respectively. An increase in the values of the ε′, ε′′, tan δ and σ_ac where observed with increase in temperature. Furthermore, the effects of interface state density (N_SS) and series resistance (R_S) on C-V characteristics were investigated in the wide temperature range.     

Effect of annealing temperature on the electrical characteristics of Platinum/4H-SiC Schottky barrier diodes

Pt/4H-SiC Schottky barrier diodes have been fabricated to investigate the effect of annealing on the electrical characteristics of the fabricated devices. The parameters such as barrier height, ideality factor and donor concentration were deduced from the current–voltage (I–V) and the capacitance–voltage (C–V) measurements at room temperature. Diodes showed non-ideal behaviour like high value of ideality factor and lower value of barrier height. A barrier height of 1.82?eV was obtained from C–V measurements and it was 1.07?eV when obtained from the I–V measurements with ideality factor 1.71 for as-deposited diodes at room temperature. The diodes, therefore, were annealed in the temperature range from 25°C to 400°C to observe the effect of annealing temperature on these parameters. Schottky barrier height and ideality factors were found to be temperature-dependent. After rapid thermal annealing upto 400°C, a barrier height of 1.59?eV from C–V measurements and the value of 1.40?eV from I–V measurements with ideality factor 1.12 were obtained. Barrier heights deduced from C–V measurements were consistently larger than those obtained from I–V measurements. To come to terms with this discrepancy, we re-examined our results by including the effect of ideality factor in the expression of the barrier height. This inclusion of ideality factor results in reasonably good agreement between the values of barrier height deduced by the above two methods. We believe that these improvements in the electrical parameters result from the improvement in the quality of interfacial layer.     

Geometrical and crystal structures,optical absorption and device characterization of N-(5-{[antipyrinyl-hydrazono]-cyanomethyl}-[1,3,4]thiadiazol-2-yl)-benzamide

The molecular structure of the N-(5-{[antipyrinyl-hydrazono]-cyanomethyl}-[1,3,4]thiadiazol-2-yl)-benzamide (ACTB) is optimized theoretically in which the energies of highest occupied molecular orbital and lowest unoccupied molecular orbital are calculated. ACTB crystalizes in triclinic structure with a space group, P2. ACTB thin films were prepared by using thermal evaporation technique onto quartz and n-Si single crystal substrates. The optical properties of the films are investigated in terms of the spectrophotometric measurements of the transmittance and reflectance. The current–voltage (I–V) characteristics of the fabricated In/ACTB/n-Si/Au diode are studied in temperature range 298–398 K. The device showed rectification behavior. At low forward voltage, the thermionic theory is applied for determining the ideality factor and barrier height as a function of temperature. The series resistance of the device is found to decrease with increasing temperature. At relatively high forward voltage, the space charge limited current dominated by exponential distribution of traps is found to be the operating mechanism in which the trapping parameters and charge carriers mobility are estimated.     

Some electrical properties of polyaniline/p-Si/Al structure at 300 K and 77 K temperatures

The electrical characterization of the PANI/p-Si/Al structure has been investigated by using current-voltage (I-V), capacitance-voltage (C-V) and capacitance-frequency (C-f) characteristics. Especially, some characteristics have been compared with the 300 K temperature characteristics at liquid nitrogen temperature. The characteristic parameters of the structure such as barrier height, ideality factor and series resistance have been determined from the current-voltage measurements. According to the C-V characteristics, the higher values of capacitance at low frequencies and high temperature have been attributed to the excess capacitance resulting from the interface states in equilibrium with the p-Si, which can follow the a.c. signal.     

On the profile of temperature dependent series resistance in Al/Si3N4/p-Si (MIS) Schottky diodes

The temperature dependence of capacitance-voltage (C-V) and conductance-voltage (G/w-V) characteristics of metal-insulator-semiconductor (Al/Si₃N₄/p-Si) Schottky barrier diodes (SBDs) was investigated by considering series resistance effect in the temperature range of 80-300 K. It is found that in the presence of series resistance, the forward bias C-V plots exhibit a peak, and experimentally show that the peak positions with a maximum at 260 K shift toward lower voltages with increasing temperature. The C-V and (G/w-V) characteristics confirm that the interface state density (N_ss) and series resistance (R_s) of the diode are important parameters that strongly influence the electric parameters of MIS structures. The crossing of the G/w-V curves appears as an abnormality compared to the conventional behavior of ideal Schottky diode. It is thought that the presence of series resistance keeps this intersection hidden and unobservable in homogeneous Schottky diodes, but it appears in the case of inhomogeneous Schottky diode. In addition, the high frequency (C_m) and conductance (G_m/w) values measured under both reverse and forward bias were corrected for the effect of series resistance to obtain the real diode capacitance.     

The analysis of the electrical characteristics and interface state densities of Re/n-type Si Schottky barrier diodes at room temperature

The main electrical characteristics of current-voltage (I-V) and capacitance-voltage (C-V) measurements at room temperature of the Re/n-type Si Schottky barrier diodes prepared by pulsed laser deposition (PLD) method have been examined. The values of the basic electrical properties such as forward saturation current (I_o), ideality factors (n), barrier heights (Ф_bo), rectification ratio (RR) and series resistances (R_S) were obtained from I-V and C-V measurements using different calculation methods. At low voltages (V ≤ 0.3 V), the electrical conduction was formed to take place by thermionic emission, whereas at high voltages (V > 0.3 V), a space charge limited conduction mechanism was shown. Furthermore, the interface state densities (N_SS) as a function of energy distribution (E_SS- E_V) was obtained from the I-V data by taking into account the bias dependence of the effective barrier height (Φ_b) for the Re/n-type Si Schottky barrier diodes.     

On the temperature dependence of series resistance and interface states in Al/SiO2/p-Si (MIS) Schottky diodes

The capacitance-voltage-temperature (C-V-T) and conductance-voltage-temperature (G/w-V-T) characteristics of metal-semiconductor (Al/p-Si) Schottky diodes with thermal growth interfacial layer were investigated by considering series resistance effect in the wide temperature range (80-400 K). It is found that in the presence of series resistance, the forward bias C-V plots exhibit a peak, and experimentally shows that the peak positions shift towards higher positive voltages with increasing temperature, and the peak value of the capacitance has a maximum at 80 K. The C-V and (G/w-V) characteristics confirm that the N_ss and R_s of the diode are important parameters that strongly influence the electric parameters in (Al/SiO₂/p-Si) MIS Schottky diodes. The crossing of the G/w-V curves appears as an abnormality when seen with respect to the conventional behaviour of the ideal MS or MIS Schottky diode. It is thought that the presence of a series resistance keeps this intersection hidden and unobservable in homogeneous Schottky diodes, but it appears in the case of inhomogeneous Schottky diode. In addition, the high frequency (C_m) and conductance (G_m/w) values measured under both reverse and forward bias were corrected for the effect of series resistance to obtain the real diode capacitance.     

Characterization and performance of Schottky diode based on wide band gap semiconductor ZnO using a low-cost and simplified sol-gel spin coating technique

In this study, a Schottky diode based on wide band gap semiconductor ZnO was fabricated on p-type Si substrate using sol-gel spin coating method. Al/ZnO/p-Si diode indicates a rectification behavior. At lower voltages, the forward current of the diode was found to obey the intrinsic thermally generated charge carriers and at relatively higher voltages, the current mechanism of the diode is controlled by a space charge limited conduction mechanism. Under reverse bias conditions, the current-voltage characteristics of the diode exhibit the lower current as compared under forward bias, indicating the existence of a current limitation mechanism induced by two field lowering mechanisms which are Poole-Frenkel and Schottky mechanisms. The parameters, series resistance R_S, the ideality factor n and the barrier height φ_B0 of the diode were determined by performing different plots obtained from the experimental forward bias current-voltage. The capacitance measurements show that the values of capacitance were almost independent of the forward bias under various frequencies. The higher values of the capacitance at low frequencies were attributed to the excess capacitance resulting from the interface states in equilibrium with the ZnO.     

Characterization of current-voltage (I-V) and capacitance-voltage-frequency (C-V-f) features of Al/SiO2/p-Si (MIS) Schottky diodes

The current-voltage (I-V) characteristics of metal-insulator-semiconductor Al/SiO₂/p-Si (MIS) Schottky diodes were measured at room temperature (300 K). In addition, capacitance-voltage-frequency (C-V-f) characteristics are investigated by considering the interface states (N_ss) at frequency range 100 kHz to 1 MHz. The MIS Schottky diode having interfacial insulator layer thickness of 33 Å, calculated from the measurement of the insulator capacitance in the strong accumulation region. At each frequency, the measured capacitance decreases with increasing frequency due to a continuous distribution of the interface states. From the I-V characteristics of the MIS Schottky diode, ideality factor (n) and barrier height (Φ_b) values of 1.766 and 0.786 eV, respectively, were obtained from a forward bias I-V plot. In addition, the interface states distribution profile as a function of (E_ss − E_v) was extracted from the forward bias I-V measurements by taking into account the bias dependence of the effective barrier height (Φ_e) for the Schottky diode. The diode shows non-ideal I-V behaviour with ideality factor greater than unity. This behaviour is attributed to the interfacial insulator layer, the interface states and barrier inhomogeneity of the device. As expected, the C-V curves gave a barrier height value higher than those obtained from I-V measurements. This discrepancy is due to the different nature of the I-V and C-V measurement techniques.     

Effect of the design and technology factors on electrical characteristics of the Au/Ti-n-GaAs Schottky diodes

Electrical properties of the Au/Ti-n-GaAs Schottky diodes are studied in relation to the production technology. The forward and reverse current-voltage characteristics of the diodes at low electric fields are analyzed on the basis of the mechanism of thermionic emission through the metal-semiconductor barrier. It is assumed that an increase in the reverse currents in the voltage range from 20 to 60 V can be accounted for by the Pool-Frenkel effect. The excess reverse currents at voltages higher than 60 V are caused by the phonon-assisted tunneling via deep states in the depletion region of the semiconductor.     

A detailed comparative study on the main electrical parameters of Au/n-Si and Au/PVA:Zn/n-Si Schottky barrier diodes

We have fabricated Au/n-Si and Au/PVA:Zn/n-Si Schottky barrier diodes (SBDs) to investigate the effect of organic interfacial layer on the main electrical characteristics. Zn doped poly(vinyl alcohol) (PVA:Zn) was successfully deposited on n-Si substrate by using the electrospinning system and surface morphology of PVA:Zn was presented by SEM images. The current–voltage (I–V) characteristics of these SBDs have been investigated at room temperature. The experimental results show that interfacial layer enhances the device performance in terms of ideality factor (n), zero-bias barrier height (Φ_B0), series resistance (R_s), and shunt resistance (R_sh) with values of 1.38, 0.75 eV, 97.64 Ω, and 203 MΩ whereas those of Au/n-Si SBD are found as 1.65, 0.62 eV, 164.15 Ω and 0.597 MΩ, respectively. Also, this interfacial layer at metal/semiconductor (M/S) interface leads to a decrease in the magnitude of leakage current and density of interface states (N_ss). The values of N_ss range from 1.36×10¹² at E_c—0.569 eV to 1.35×10¹³ eV^?1 cm^?2 at E_c—0.387 eV for Au/PVA:Zn/n-Si SBD and 3.34×10¹² at E_c—0.560 eV to 1.35×10¹³ eV^?1 cm^?2 at E_c—0.424 eV for Au/n-Si SBD. The analysis of experimental results reveals that the existence of PVA:Zn interfacial layer improves the performance of such devices.     

Correlation between barrier heights and ideality factors of H-terminated Sn/p-Si(1 0 0) Schottky barrier diodes

Schottky barrier diodes (SBDs) were prepared by evaporation on H-terminated p-Si(1 0 0) surfaces. The Si(1 0 0)-H surfaces were obtained by wet chemical etching in diluted hydrofluoric acid. The current–voltage (I–V) characteristics of real SBDs are described by using two fitting parameters that are the effective barrier height (EBH) and ideality factor n. They were determined from I–V characteristics of SBDs (30 diodes) fabricated under experimentally identical conditions. The obtained values of EBHs varied from 0.729 to 0.749 eV, and the values of ideality factors varied from 1.083 to 1.119. The results showed that both parameters of SBDs differ from one diode to another even if they are identically prepared. The EBH distributions were fitted by two Gaussian distribution functions, and their mean values were found to be 0.739 ± 0.003 eV and 0.733 ± 0.001 eV, respectively. The homogeneous barrier height of SBDs was found to be 0.770 eV from the linear relationship between EBHs () and ideality factors (n).     

Ballistic electron emission microscopy studies of the temperature dependence of Schottky barrier height distribution in CoSi2/n-Si(1 0 0) diodes formed by solid phase reaction

Ballistic electron emission microscopy (BEEM) and ballistic electron emission spectroscopy have been performed on polycrystalline and epitaxial CoSi₂/n-Si(1 0 0) contacts at temperatures ranging from −144°C to −20°C. The ultra-thin CoSi₂ films (10 nm) were fabricated by solid state reaction of a single layer of Co (3 nm) or a multilayer of Ti (1 nm)/Co (3 nm)/amorphous-Si(1 nm)/Ti (1 nm) with a Si substrate, respectively. The spatial distribution of barrier height over the contact area obeys a Gaussian function at each temperature. The mean barrier height increases almost linearly with decreasing temperature with a coefficient of −0.23±0.02 meV/K for polycrystalline CoSi₂/Si diodes and −0.13±0.03 meV/K for epitaxial diodes. This is approximately equal to one or one-half of the temperature coefficient of the indirect energy gap in Si, respectively. It suggests that the Fermi level is pinned to different band positions of Si. The width of the Gaussian distribution is about 30–40 meV, without clear dependence on the temperature. The results obtained from conventional current–voltage and capacitance–voltage (I–V/C–V) measurements are compared to BEEM results.