Influence of Parathyroid Hormone-Loaded PLGA Nanoparticles in Porous Scaffolds for Bone Regeneration

Biodegradable poly(lactide-co-glycolide) (PLGA) nanoparticles, containing human parathyroid hormone (PTH (1–34)), prepared by a modified double emulsion-solvent diffusion-evaporation method, were incorporated in porous freeze-dried chitosan-gelatin (CH-G) scaffolds. The PTH-loaded nanoparticles (NPTH) were characterised in terms of morphology, size, protein loading, release kinetics and in vitro assessment of biological activity of released PTH and cytocompatibility studies against clonal human osteoblast (hFOB) cells. Structural integrity of incorporated and released PTH from nanoparticles was found to be intact by using Tris-tricine SDS-PAGE. In vitro PTH release kinetics from PLGA nanoparticles were characterised by a burst release followed by a slow release phase for 3–4 weeks. The released PTH was biologically active as evidenced by the stimulated release of cyclic AMP from hFOB cells as well as increased mineralisation studies. Both in vitro and cell studies demonstrated that the PTH bioactivity was maintained during the fabrication of PLGA nanoparticles and upon release. Finally, a content of 33.3% w/w NPTHs was incorporated in CH-G scaffolds, showing an intermittent release during the first 10 days and, followed by a controlled release over 28 days of observation time. The increased expression of Alkaline Phosphatase levels on hFOB cells further confirmed the activity of intermittently released PTH from scaffolds.     

The Effect of Ozone Gas on IL-1β and IL-10 Levels of Gingival Crevicular Fluid in Aggressive Periodontitis Patients

ABSTRACT

Although the use of ozone therapy in dentistry has become widespread, the number of controlled clinical trials evaluating its effectiveness in periodontal therapy is limited. The aim of this study was to evaluate the efficacy of ozone treatment, that is used in concert with scaling and root planning (SRP), on clinical periodontal parameters and to analyze its effect on cytokine levels of GCF in aggressive periodontitis patients. Totally, 27 patients with aggressive periodontitis were randomly selected into groups of treatment with either subgingival SRP followed by application of ozone with a periodontal probe (SRP+ozone) or subgingival SRP followed by irrigation with serum irrigation (SRP-control). The following parameters were evaluated at baseline (T0), and 6 weeks (T1): plaque index (PI); gingival index (GI); probing pocket depth (PPD), clinical attachment loss (CAL), GCF volume, GCF Interleukin-1β (IL-1β), and GCF Interleukin-10 (IL-10) cytokine levels. There was a significant difference in terms of clinical periodontal parameters before and after treatment in both groups. When comparing between groups, there was no significant difference between the treatment methods after 6 weeks with respect to the PI, PPD, CAL, and GCF IL-10 levels. In contrast, GI, GCF volume, and GCF IL-1β levels were statistically significantly different between the two groups at the 6th week after treatment. Application of ozone as an adjunctive therapy to SRP was shown to provide a statistically significant improvement in treatment results compared to SRP plus serum irrigation.     

PLGA Biodegradable Nanoparticles Containing Perphenazine or Chlorpromazine Hydrochloride: Effect of Formulation and Release

In our study, poly(dl-lactide-co-glycolide) (PLGA) nanoparticles loaded with perphenazine (PPH) and chlorpromazine hydrochloride (CPZ-HCl) were formulated by emulsion solvent evaporation technique. The effect of various processing variables, including PLGA concentration, theoretical drug loading, poly(vinyl alcohol) (PVA) concentration and the power of sonication were assessed systematically to obtain higher encapsulation efficiency and to minimize the nanoparticles size. By the optimization formulation process, the nanoparticles were obtained in submicron size from 325.5 ± 32.4 to 374.3 ± 10.1 nm for nanoparticles loaded with PPH and CPZ-HCl, respectively. Nanoparticles observed by scanning electron microscopy (SEM) presented smooth surface and spherical shape. The encapsulation efficiency of nanoparticles loaded with PPH and CPZ-HCl were 83.9% and 71.0%, respectively. The drug loading were 51.1% and 39.4% for PPH and CPZ-HCl, respectively. Lyophilized nanoparticles with different PLGA concentration 0.8%, 1.3% and 1.6% (w/v) in formulation process were evaluated for in vitro release in phosphate buffered saline (pH = 7.4) by using dialysis bags. The release profile for both drugs have shown that the rate of PPH and CPZ-HCl release were dependent on a size and amount of drugs in the nanoparticles.     

Myricetin Prevents Alveolar Bone Loss in an Experimental Ovariectomized Mouse Model of Periodontitis

Periodontitis is a common chronic inflammatory disease, which leads to alveolar bone resorption. Healthy and functional alveolar bone, which can support the teeth and enable their movement, is very important for orthodontic treatment. Myricetin inhibited osteoclastogenesis by suppressing the expression of some genes, signaling pathways, and cytokines. This study aimed to investigate the effects of myricetin on alveolar bone loss in an ovariectomized (OVX) mouse model of periodontitis as well as in vitro osteoclast formation and bone resorption. Twenty-four healthy eight-week-old C57BL/J6 female mice were assigned randomly to four groups: phosphate-buffered saline (PBS) control (sham) OVX + ligature + PBS (vehicle), and OVX + ligature + low or high (2 or 5 mg∙kg⁻¹∙day⁻¹, respectively) doses of myricetin. Myricetin or PBS was injected intraperitoneally (i.p.) every other day for 30 days. The maxillae were collected and subjected to further examination, including micro-computed tomography (micro-CT), hematoxylin and eosin (H&E) staining, and tartrate-resistant acid phosphatase (TRAP) staining; a resorption pit assay was also performed in vitro to evaluate the effects of myricetin on receptor activator of nuclear factor κ-B ligand (RANKL)-induced osteoclastogenesis. Myricetin, at both high and low doses, prevented alveolar bone resorption and increased alveolar crest height in the mouse model and inhibited osteoclast formation and bone resorption in vitro. However, myricetin was more effective at high dose than at low dose. Our study demonstrated that myricetin had a positive effect on alveolar bone resorption in an OVX mouse model of periodontitis and, therefore, may be a potential agent for the treatment of periodontitis and osteoporosis.     

Influence of Incubation Time on Ortho-Toluidine Blue Mediated Antimicrobial Photodynamic Therapy Directed against Selected Candida Strains—An In Vitro Study

(1) Background and the aim: The appropriate incubation time in the antimicrobial photodynamic therapy protocol seems to have a huge impact on the efficacy of this process. This is particularly important in relation to Candida strains, due to the size of these cells and the presence of the cell wall. The aims of this study were to determine the optimal incubation time needed for the absorption of toluidine blue by cells of C. albicans, C. glabrata, C. krusei and C. parapsilosis using direct observation by optical microscopy, and to evaluate the efficacy of TBO-mediated aPDT on planktonic cells of these strains. (2) Methods: The microscopic evaluation consisted of taking a series of images at a magnification of 600× and counting the % of stained cells. The in vitro effect of TBO-mediated aPDT combined with a diode laser (635 nm, 400mW, 12 J/cm², CW) on the viability of yeast cells with different incubation times was evaluated. (3) Results: The presence of TBO within the cytoplasm was observed in all tested Candida strains and at all microscopic evaluation times. However, the highest percentages of cells were stained at 7 and 10 min. The highest % reduction of CFU/mL after TBO-mediated aPDT against Candida was obtained for the strain C. albicans ATCC 10,231 and it was 78.55%. (4) Conclusions: TBO-mediated aPDT against Candida was effective in reducing the number of CFU/mL at all assessed incubation times. However, the most efficient period for almost all strains was 7–10 min.     

Chitosan-Gelatin Films Cross-Linked with Dialdehyde Cellulose Nanocrystals as Potential Materials for Wound Dressings

In this study, thin chitosan-gelatin biofilms cross-linked with dialdehyde cellulose nanocrystals for dressing materials were received. Two types of dialdehyde cellulose nanocrystals from fiber (DNCL) and microcrystalline cellulose (DAMC) were obtained by periodate oxidation. An ATR-FTIR analysis confirmed the selective oxidation of cellulose nanocrystals with the creation of a carbonyl group at 1724 cm⁻¹. A higher degree of cross-linking was obtained in chitosan-gelatin biofilms with DNCL than with DAMC. An increasing amount of added cross-linkers resulted in a decrease in the apparent density value. The chitosan-gelatin biofilms cross-linked with DNCL exhibited a higher value of roughness parameters and antioxidant activity compared with materials cross-linked with DAMC. The cross-linking process improved the oxygen permeability and anti-inflammatory properties of both measurement series. Two samples cross-linked with DNCL achieved an ideal water vapor transition rate for wound dressings, CS-Gel with 10% and 15% addition of DNCL—8.60 and 9.60 mg/cm²/h, respectively. The swelling ability and interaction with human serum albumin (HSA) were improved for biofilms cross-linked with DAMC and DNCL. Significantly, the films cross-linked with DAMC were characterized by lower toxicity. These results confirmed that chitosan-gelatin biofilms cross-linked with DNCL and DAMC had improved properties for possible use in wound dressings.     

IKBKB siRNA-Encapsulated Poly (Lactic-co-Glycolic Acid) Nanoparticles Diminish Neuropathic Pain by Inhibiting Microglial Activation

Activation of nuclear factor-kappa B (NF-κB) in microglia plays a decisive role in the progress of neuropathic pain, and the inhibitor of kappa B (IκB) is a protein that blocks the activation of NF-κB and is degraded by the inhibitor of NF-κB kinase subunit beta (IKBKB). The role of IKBKB is to break down IκB, which blocks the activity of NF-kB. Therefore, it prevents the activity of NK-kB. This study investigated whether neuropathic pain can be reduced in spinal nerve ligation (SNL) rats by reducing the activity of microglia by delivering IKBKB small interfering RNA (siRNA)-encapsulated poly (lactic-co-glycolic acid) (PLGA) nanoparticles. PLGA nanoparticles, as a carrier for the delivery of IKBKB genes silencer, were used because they have shown potential to enhance microglial targeting. SNL rats were injected with IKBKB siRNA-encapsulated PLGA nanoparticles intrathecally for behavioral tests on pain response. IKBKB siRNA was delivered for suppressing the expression of IKBKB. In rats injected with IKBKB siRNA-encapsulated PLGA nanoparticles, allodynia caused by mechanical stimulation was reduced, and the secretion of pro-inflammatory mediators due to NF-κB was reduced. Delivering IKBKB siRNA through PLGA nanoparticles can effectively control the inflammatory response and is worth studying as a treatment for neuropathic pain.     

Staphylococcus aureus and MRSA Growth and Biofilm Formation after Treatment with Antibiotics and SeNPs

Methicillin-resistant Staphylococcus aureus (MRSA) is a dangerous pathogen resistant to β-lactam antibiotics. Due to its resistance, it is difficult to manage the infections caused by this strain. We examined this issue in terms of observation of the growth properties and ability to form biofilms in sensitive S. aureus and MRSA after the application of antibiotics (ATBs)—ampicillin, oxacillin and penicillin—and complexes of selenium nanoparticles (SeNPs) with these ATBs. The results suggest the strong inhibition effect of SeNPs in complexes with conventional ATBs. Using the impedance method, a higher disruption of biofilms was observed after the application of ATB complexes with SeNPs compared to the group exposed to ATBs without SeNPs. The biofilm formation was intensely inhibited (up to 99% ± 7% for S. aureus and up to 94% ± 4% for MRSA) after application of SeNPs in comparison with bacteria without antibacterial compounds whereas ATBs without SeNPs inhibited S. aureus up to 79% ± 5% and MRSA up to 16% ± 2% only. The obtained results provide a basis for the use of SeNPs as a tool for the treatment of bacterial infections, which can be complicated because of increasing resistance of bacteria to conventional ATB drugs.     

Adjunctive Application of Antimicrobial Photodynamic Therapy in Nonsurgical Periodontal Treatment: A Review of Literature

Periodontal disease is caused by dental plaque biofilms, and the removal of these biofilms from the root surface of teeth plays a central part in its treatment. The conventional treatment for periodontal disease fails to remove periodontal infection in a subset of cases, such as those with complicated root morphology. Adjunctive antimicrobial photodynamic therapy (aPDT) has been proposed as an additional treatment for this infectious disease. Many periodontal pathogenic bacteria are susceptible to low-power lasers in the presence of dyes, such as methylene blue, toluidine blue O, malachite green, and indocyanine green. aPDT uses these light-activated photosensitizer that is incorporated selectively by bacteria and absorbs a low-power laser/light with an appropriate wavelength to induce singlet oxygen and free radicals, which are toxic to bacteria. While this technique has been evaluated by many clinical studies, some systematic reviews and meta-analyses have reported controversial results about the benefits of aPDT for periodontal treatment. In the light of these previous reports, the aim of this review is to provide comprehensive information about aPDT and help extend knowledge of advanced laser therapy.     

Photodynamic Inactivation of an Endodontic Bacteria Using Diode Laser and Indocyanine Green-Loaded Nanosphere

Apical periodontitis, an inflammatory lesion causing bone resorption around the apex of teeth, is treated by eradicating infectious bacteria from the root canal. However, it has a high recurrence rate and often requires retreatment. We investigated the bactericidal effect of antimicrobial photodynamic therapy (aPDT)/photodynamic antimicrobial chemotherapy (PACT) using indocyanine green (ICG)-loaded nanospheres coated with chitosan and a diode laser on a biofilm of Enterococcus faecalis, a pathogen of refractory apical periodontitis. Biofilm of E. faecalis was cultured in a porcine infected root canal model. ICG solution was injected into the root canal, which was then irradiated with a laser (810 nm wavelength) from outside the root canal. The bactericidal effect was evaluated by colony counts and scanning electron microscopy. The result of the colony counts showed a maximum 1.89 log reduction after irradiation at 2.1 W for 5 min. The temperature rise during aPDT/PACT was confirmed to be within a safe range. Furthermore, the light energy transmittance through the root was at a peak approximately 1 min after the start of irradiation, indicating that most of the ICG in the root canal was consumed. This study shows that aPDT/PACT can suppress E. faecalis in infected root canals with high efficiency.     

Investigation of the Properties of Linen Fibers and Dressings

In antiquity, flax was used as a dressing for healing wounds. Currently, work is underway on the genetic modification of flax fibers to improve their properties. Genetic modifications have resulted in an increased content of antioxidants and more favorable mechanical properties. The works published so far have presented independent tests of fibers and dressings after appropriate technological treatments in cell cultures. This study aimed to compare the properties of the fibers and the dressing produced in cell cultures—hamster fibroblasts—V79. The research material was traditional NIKE fibers; genetically modified M, B, and MB fibers; and linen dressings obtained from these fibers. The extract from 48-h incubation of 40 mg of fiber in the culture medium, which was desolved into 10, 20, and 30 mg, was administered to the cell culture. On the other hand, a linen dressing was placed on cells with an area of 0.5 cm², 1 cm², 1.5 cm², and 2 cm². Cells with fiber or dressing were incubated for 48 h, and then, biological tests were performed, including cell viability (in propidium iodide staining), cell proliferation (in the SRB assay), evaluation of the intracellular free radical level (in the DCF-DA assay), genotoxicity (in the comet assay), assessment of the apoptotic and necrotic cells (in staining anexin-V and iodide propidium), the course of the cell cycle, and the scratch test. The correlation between apoptosis and genotoxicity and the levels of free radicals and genotoxicity were determined for the tested linen fibers and fabrics. The tests presented that the fibers are characterized by the ability to eliminate damaged cells in the elimination phase. However, the obtained fabrics gain different properties during the technological processing of the fibers into linen dressings. Linen fabrics have better regenerative properties for cells than fibers. The linseed dressing made of MB fiber has the most favorable regenerative properties.     

Preparation and drug release behaviors of 5‐fluorouracil loaded poly(glycolide‐co‐lactide‐co‐caprolactone) nanoparticles

5‐Fluorouracil (5‐Fu) loaded poly(glycolide‐co‐lactide‐co‐caprolactone) (PGLC) nanoparticles were prepared by modified spontaneous emulsification solvent diffusion method (modified‐SESD method) and characterized by dynamic light scattering, scanning electron microscopy and ¹H NMR determination. It was found that the obtained nanoparticles showed near spherical shape and was controllable with the radius range of 30–100 nm. Compared with the nanoparticles prepared by polylactide and poly (lactide‐co‐glycolide) (PLGA) under the similar preparation condition, yield of PGLC nanoparticles was the highest, which reached to about 100%. On the other hand, drug entrapment efficiency of PGLC nanoparticles was also higher than that of PLGA and PLLA nanoparticles. 5‐Fu release behavior of PGLC nanoparticles in vitro showed that 5‐Fu release of PGLC nanoparticles showed a near zero‐order release profile, and 5‐Fu release rate of PGLC nanoparticles was faster than that of PLLA and PLGA nanoparticles. According to degradation behavior of PGLC nanoparticles, it could be proposed that the kinetic of degradation controlled release played an important role in the release process of PGLC nanoparticles. It revealed that the PGLC nanoparticles could be a promising drug carrier. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2007     

Chemical Compounds Released from Specific Osteoinductive Bioactive Materials Stimulate Human Bone Marrow Mesenchymal Stem Cell Migration

In this work, a poly(L-lactide-co-glycolide) (PLGA)-based composite was enriched with one of the following sol-gel bioactive glasses (SBG) at 50 wt.%: A1—40 mol% SiO₂, 60 mol% CaO, CaO/SiO₂ ratio of 1.50; S1—80 mol% SiO₂, 20 mol% CaO, CaO/SiO₂ ratio of 0.25; A2—40 mol% SiO₂, 54 mol% CaO, 6 mol% P₂O₅, CaO/SiO₂ ratio of 1.35; S2—80 mol% SiO₂,16 mol% CaO, 4 mol% P₂O₅, CaO/SiO₂ ratio of 0.20. The composites and PLGA control sheets were then soaked for 24 h in culture media, and the obtained condition media (CM) were used to treat human bone marrow stromal cells (hBMSCs) for 72 h. All CMs from the composites increased ERK 1/2 activity vs. the control PLGA CM. However, expressions of cell migration-related c-Fos, osteopontin, matrix metalloproteinase-2, C-X-C chemokine receptor type 4, vascular endothelial growth factor, and bone morphogenetic protein 2 were significantly increased only in cells treated with the CM from the A1/PLGA composite. This CM also significantly increased the rate of human BMSC migration but did not affect cell metabolic activity. These results indicate important biological markers that are upregulated by products released from the bioactive composites of a specific chemical composition, which may eventually prompt osteoprogenitor cells to colonize the bioactive material and accelerate the process of tissue regeneration.     

Simultaneous co-substitution of Sr2+/Fe3+ in hydroxyapatite nanoparticles for potential biomedical applications

In human, strontium (Sr) follows the same physiological pathway as calcium and thus could be used for improving the bioactivity and osteoconductivity of hydroxyapatite (HAp) in bone tissues. Similarly, iron (Fe) can potentially play an important role in bone remodeling due to its magnetic properties. Therefore, the current study was aimed to simultaneously co-substitute Sr²⁺/Fe³⁺ in HAp nanoparticles for various potential biomedical applications. The Sr²⁺/Fe³⁺ co-substituted HAp nanoparticles were systematically synthesized through sonication-assisted aqueous precipitation method. The as-synthesized nanoparticles were evaluated for different physicochemical and biological properties. X-ray diffraction (XRD) patterns of Sr²⁺/Fe³⁺ co-substituted HAp nanoparticles confirmed their phase purity and showed hexagonal-like structure. Scanning electron microscope (SEM) micrographs showed an agglomerated rod-like morphology of HAp nanoparticles which contained pores consisted of small spheroids. The nanoparticles displayed magnetization (Ms) reliance on the loading level of mole % (X?=?Fe³⁺) and exhibited tunable porosity and microhardness (Hv) upon heat treatment. The nanoparticles showed less than 5% hemolysis demonstrating high blood compatibility with high in vitro bioactivity performance. The multifunctional properties of synthesized nanoparticles make them a potential candidate for various biomedical applications; including bone grafting and guided bone regeneration, targeted drug delivery, magnetic resonance imaging, and hyperthermia based cancer treatment.     

Novel preparation of PLGA/HP55 nanoparticles for oral insulin delivery

The aim of the present study was to develop the PLGA/HP55 nanoparticles with improved hypoglycemic effect for oral insulin delivery. The insulin-loaded PLGA/HP55 nanoparticles were produced by a modified multiple emulsion solvent evaporation method. The physicochemical characteristics, in vitro release of insulin, and in vivo efficacy in diabetic rats of the nanoparticles were evaluated. The insulin encapsulation efficiency was up to 94%, and insulin was released in a pH-dependent manner under simulated gastrointestinal conditions. When administered orally (50 IU/kg) to diabetic rats, the nanoparticles can decrease rapidly the blood glucose level with a maximal effect between 1 and 8 h. The relative bioavailability compared with subcutaneous injection (5 IU/kg) in diabetic rats was 11.3% ± 1.05%. This effect may be explained by the fast release of insulin in the upper intestine, where it is better absorbed by the high gradient concentration of insulin than other regions. These results show that the PLGA/HP55 nanoparticles developed in the study might be employed as a potential method for oral insulin delivery.     

Self-Assembled,Chitosan Grafted PLGA Nanoparticles for Intranasal Delivery: Design,Development and Ex Vivo Characterization

The objective of present study was to modify the surface of Poly(D,L-lactide-co-glycolide acid) (PLGA) nanoparticles (NPs) with chitosan to enhance the mucoadhesive potential of carrier system. Grafting of chitosan on PLGA surface was carried out via amide bond formation mediated by carbodiimide and confirmed by FTIR spectroscopy. Self-assembled PLGA NPs containing chlorpromazine hydrochloride were fabricated by 2³ factorial design. The improved mucoadhesive potential was confirmed by several tests including in vitro mucoadhesion study. Ex vivo permeation was satisfactory. Histopathological study on sheep nasal mucosa revealed safe mucoadhesion. They were also found to be robust on accelerated stability study.     

Microencapsulation of doxycycline into poly(lactide-co-glycolide) by spray drying technique: Effect of polymer molecular weight on process parameters

Poly(lactide-co-glycolide) (PLGA) polymers with three different molecular weights were prepared, and microparticles were produced by spray drying and water-in-oil-water (w/o/w) double emulsion techniques to encapsulate 86% of doxycycline (DXY), an antibiotic drug, for the use of periodontitis. Placebo and drug-loaded microspheres and pristine DXY were analyzed by Fourier transform infrared spectroscopy, which indicated no chemical interactions between DXY and PLGA. X-ray diffraction of drug-loaded microspheres confirmed the molecular level dispersion of DXY in PLGA. Scanning electron microscopy confirmed spherical nature and smooth surfaces of the microspheres. Mean particle size as measured by laser light scattering technique ranged between 10 and 25 μm. In vitro release of DXY performed in 7.4 pH media continued up to 72 h and depended on molecular weight of PLGA and extent of DXY loading. Antimicrobial studies performed on one formulation and placebo microspheres suggested that drug concentrations during in vitro release are above the minimum inhibitory concentration (MIC) for Staphylococcus aureus growth. Overall, the release studies depended on the molecular weight of PLGA, extent of drug loading, and the method used to prepare microspheres. Statistical analyses of release data performed using the analysis of variance (ANOVA) method agreed well with experimental observations. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Type I Interferons Enhance the Repair of Ultraviolet Radiation-Induced DNA Damage and Regulate Cutaneous Immune Suppression

Type I interferons (IFNs) are important enhancers of immune responses which are downregulated in human cancers, including skin cancer. Solar ultraviolet (UV) B radiation is a proven environmental carcinogen, and its exposure contributes to the high prevalence of skin cancer. The carcinogenic effects of UV light can be attributed to the formation of cyclobutane pyrimidine dimers (CPD) and errors in the repair and replication of DNA. Treatment with a single dose of UVB (100 mJ/cm²) upregulated IFNα and IFNβ in the skin of C57BL/6 mice. IFNα and IFNβ were predominantly produced by CD11b+ cells. In mice lacking the type I IFN receptor 1 (IFNAR1), the repair of CPD following cutaneous exposure to a single dose of UVB (100 mJ/cm²) was decreased. UVB induced the expression of the DNA repair gene xeroderma pigmentosum A (XPA) in wild-type (WT) mice. In contrast, such treatment in IFNAR1 (IFNAR1-/-) mice downregulated XPA. A local UVB regimen consisting of UVB radiation (150 mJ/cm²) for 4 days followed by sensitization with hapten 2,4, dinitrofluorobenzene (DNFB) resulted in significant suppression of immune responses in both WT and IFNAR1-/- mice. However, there were significantly higher CD4+CD25+Foxp3+ regulatory T-cells in the draining lymph nodes of IFNAR1-/- mice in comparison to WT mice. Overall, our studies reveal a previously unknown action of type I IFNs in the repair of photodamage and the prevention of UVB-induced immune suppression.     

Preparation and wear assessment of ultrasonic electrodeposited Ni–TiN thin films

In this study, pure Ni and Ni–TiN thin films were prefabricated from a reformative Watt nickel bath through ultrasonic electrodeposition (UE) under pulse current (PC) condition. The effects of ultrasonic intensity on surface morphology, microstructure and phase composition were evaluated through scanning electron microscopy (SEM), scanning probe microscopy (SPM), transmission electron microscopy (TEM) and X-ray diffraction (XRD). The Vickers hardness, the friction coefficient and the wear resistance of Ni and Ni–TiN thin films were also estimated. All SEM, SPM, and TEM results demonstrated that the Ni-TiN thin film obtained at the ultrasonic intensity of 30?W/cm² had a fine, smooth and homogeneous surface morphology. The root-mean-square roughness (Rms) and arithmetic mean roughness (Ra) of the film with a surface area of 4.096?µm² were 36.813?nm and 22.836?nm, respectively. Also, the mean diameters of Ni grains and TiN nanoparticles were approximately 46.7?nm and 23.2?nm, respectively. The XRD analysis indicated that the XRD patterns of the films prepared with different plating parameters had the same diffraction angle with the Ni phase except the diffraction intensity. Microhardness tests exhibited that the Ni film displayed the minimum microhardness value of 38.6 HV. Moreover, the Ni-TiN film obtained at the ultrasonic intensity of 30?W/cm² acquired the maximum microhardness value of 912.1 HV. The wear behavior assessment demonstrated that the Ni-TiN film prefabricated at the ultrasonic intensity of 30?W/cm² sustained the least weight loss, while the mean friction coefficient was approximately 0.39, thereby displaying the best wear resistance.     

Polymer-Immobilized Photosensitizers for Continuous Eradication of Bacteria

The photosensitizers Rose Bengal (RB) and methylene blue (MB), when immobilized in polystyrene, were found to exhibit high antibacterial activity in a continuous regime. The photosensitizers were immobilized by dissolution in chloroform, together with polystyrene, with further evaporation of the solvent, yielding thin polymeric films. Shallow reservoirs, bottom-covered with these films, were used for constructing continuous-flow photoreactors for the eradication of Gram-positive Staphylococcus aureus, Gram-negative Escherichia coli and wastewater bacteria under illumination with visible white light using a luminescent lamp at a 1.8 mW·cm⁻² fluence rate. The bacterial concentration decreased by two to five orders of magnitude in separate reactors with either immobilized RB or MB, as well as in three reactors connected in series, which contained one of the photosensitizers. Bacterial eradication reached more than five orders of magnitude in two reactors connected in series, where the first reactor contained immobilized RB and the second contained immobilized MB.