移动卫星网络中基于最小费用的切换算法

对于移动卫星网络,合理的星地链路切换方案需要在保证最小切换时延的同时,能够最优地使用网络资源。该文通过引入业务的中断概率和费用模型,给出了切换过程中重路由的最优触发条件,提出一种基于最小费用的切换(SMCH)算法。该算法可在保证切换业务通信的连续性和时延等指标不被破坏的基础上,通过适当的触发重路由来降低切换费用。仿真表明该算法在保证切换业务的QoS,降低切换费用以及适应性、灵活性等方面都优于同类切换算法。     

一种LTE与WLAN间垂直切换新算法

为提高用户在异构网络中的服务质量(QoS),减少切换产生的乒乓效应,文中提出了一种LTE和WLAN网络垂直切换新算法。该算法考虑了衰落对接收信号强度(RSS)的影响,基于RSS选出目标网络,根据用户移动速度并结合代价函数选出最佳网络,代价函数中采用了层次分析法来确定时延、资费和用户偏好等参数的权重。仿真结果表明,文中所提的垂直切换算法有效降低了“乒乓效应”,并提高了通信网络的服务质量。     

互联网智能路由架构及算法

突发流量在网络中非常普遍,会严重损害用户体验。突发流量往往能在短时间（如毫秒级别）内充满链路,导致网络拥塞和频繁分组丢失,端到端时延增加。传统路由算法要么是流量无关（如 OSPF（open shortest path first,开放式最短路径优先））的,无法对实时流量的变化做出调整;要么是集中式控制的（如线性规划）,面临求解时延过大而无法有效应对突发流量的问题。提出了一种新的智能路由算法解决突发流量的问题。一方面,提出的算法能利用机器学习强大的建模能力,通过对网络历史数据的挖掘来学习“隐式”的路由决策依据。另一方面,提出的算法能借助机器学习的快速推理能力降低决策时延,提高系统对突发流量的响应速度。实验结果表明,在真实流量数据集下,相比较其他路由算法,提出的智能路由算法能降低13%～70%的瓶颈链路利用率。     

一种适合于第四代公网集群系统的切换算法

提出了一种适合于公网集群系统的小区切换算法.在公网集群系统中,多个群组用户同时进行越区切换,可能造成信令风暴,导致更高的切换时延,降低了小区切换成功率.通过引入桥梁群组用户这一概念,通过桥梁群组用户同时连接2个网络,利用2次垂直切换代替一次水平切换的方法,避免了大量群组用户同时发起切换测量.仿真结果表明,利用移动自组织网络为准备切换的集群用户组成一个小网络,桥梁群组用户带领其他群组用户切换的方法比传统切换算法的切换成功率高,切换时延更短.     

基于时延调节的移动自组网多路径路由策略

针对AOMDV协议的多路径切换机制,提出了一种基于时延调节的移动自组网多路径路由策略,根据目的端获得的分组时延规律主动切换路径,达到负载均衡的目的。仿真实验结果表明,能在一定程度上降低路由开销以及延长网络生存时间。     

准静止状态下的高空平台实时业务信道分配

受平台准静止状态的影响,高空平台（ HAPS)通信网络内存在大量的切换呼叫,且业务量动态变化。 HAPS网络可传输多种业务,其中实时业务在切换过程中具有较高的时延要求。通过为切换呼叫预留信道可降低平台不稳定对服务质量（ QoS)造成的影响。在基于服务优先级的多业务信道分配算法基础上,重点对实时业务的信道分配算法进行改进,提出了一种基于概率的预留信道借用策略。该算法可根据网络内业务量的实时统计数据控制新呼叫业务的准入。仿真结果表明：与固定预留信道算法和门限预留信道算法相比,该算法能够适应网络内业务量的动态变化,在保证切换呼叫掉线率满足期望值的条件下提升系统的整体性能,降低平台不稳定造成的性能损失。     

基于区间二型模糊神经网络的垂直切换算法

在超密集异构无线网络中,针对传统垂直切换算法无法同时描述网络状态的模糊性和随机性,导致网络性能得不到有效提升的问题,提出一种基于区间二型模糊神经网络的垂直切换算法.重构了两阶段判决算法:在网络预筛选阶段,定义了历史接入率,结合当前候选网络集的数目设置阈值.根据接收信号强度和剩余可用带宽,对用户接收范围内的所有网络进行初步筛选;再在垂直切换判决阶段,将剩余候选网络的时延,丢包率以及误码率作为区间二型模糊神经网络的输入,利用前馈神经网络的结构完成模糊逻辑推理,经训练之后计算得到输出判决值,从而选择最佳接入网络.实验结果表明,该算法能在保证时间开销较低的同时,有效降低切换决策的错误概率,减少切换失败和切换次数,提升网络总吞吐量.     

光突发交换网络中Jitter-EDF调度算法的研究

提出了一种应用于OBS网络中的Jitter-EDF调度算法来减小时延抖动对实时性突发QoS的影响,设计了基于该算法的OBS网络中核心路由器的主要结构,讨论了此算法实现的可能性,并推导出端到端时延的上下限和时延抖动的上限,最后结合具体网络拓扑进行了仿真和分析。结果表明,Jitter-EDF调度算法能够将时延抖动的幅度平均降低到30%～40％,有效保证了实时性应用对时延抖动的要求。     

基于层次分析法的WLAN/蜂窝网络切换判决算法

针对WLAN/蜂窝异构网络的特点,提出了基于层次分析法的网络切换判决算法。算法综合考虑了网络状态及用户业务特征,分别采用SAW法和TOPSIS法对网络组合权向量进行了计算,仿真表明基于层次分析法的TOPSIS法与SAW法相比,更适合时延敏感业务的网络切换判决。     

卫星网络中基于最小中断概率的时延受限路由算法

针对卫星网络链路时延长和拓扑时变的特点,给出一种可满足时延限制且在业务持续时间内尽可能不发生中断的时延受限最优寻路(SDCOP)算法,该算法通过预测拓扑链接情况来有效降低链路切换对网络QoS的影响,且具有计算复杂度低,可适应星上设备处理能力的要求等优点。仿真表明算法在计算复杂性、业务阻塞率以及业务中断率方面都优于同类算法。     

Resolution Enhancement Technology:Integrated Process Solutions using OPC

DUV lithography, using the 248 nm wavelength, is a viable manufacturing option for devices with features at 130 nm and less. Given the low kl value of the lithography, integrated process development is a necessary method for achieving acceptable process latitude. The application of assist features for rule based OPC requires the simultaneous optimization of the mask, illumination optics and the resist.Described in this paper are the details involved in optimizing each of these aspects for line and space imaging.A reference pitch is first chosen to determine how the optics will be set. The ideal sigma setting is determined by a simple geometrically derived expression. The inner and outer machine settings are determined, in turn,with the simulation of a figure of merit. The maximum value of the response surface of this FOM occurs at the optimal sigma settings. Experimental confirmation of this is shown in the paper.Assist features are used to modify the aerial image of the more isolated images on the mask. The effect that the diffraction of the scattering bars (SBs) has on the image intensity distribution is explained. Rules for determining the size and placement of SBs are also given.Resist is optimized for use with off-axis illumination and assist features. A general explanation of the material' s effect is discussed along with the affect on the through-pitch bias. The paper culminates with the showing of the lithographic results from the fully optimized system.     

Cost-effective test solutions for smart card and other integrated flash applications

From its emergence in the late 1980s as a lower cost alternative to early EEPROM technologies, flash memory has evolved to higher densities and speedsand rapidly growing acceptance in mobile applications.In the process, flash memory devices have placed increased test requirements on manufacturers. Today, as flash device test grows in importance in China, manufacturers face growing pressure for reduced cost-oftest, increased throughput and greater return on investment for test equipment. At the same time, the move to integrated flash packages for contactless smart card applications adds a significant further challenge to manufacturers seeking rapid, low-cost test.     

An improved parallel thinning algorithm with two subiterations

The parallel thinning algorithm with two subiterations is improved in this paper. By analyzing the notions of connected components and passes, a conclusion is drawn that the number of passes and the number of eight-connected components are equal. Then the expression of the number of eight-connected components is obtained which replaces the old one in the algorithm. And a reserving condition is proposed by experiments, which alleviates the excess deletion where a diagonal line and a beeline intersect. The experimental results demonstrate that the thinned curve is almost located in the middle of the original curve connectivelv with single pixel width and the processing speed is high.     

Theoretical analysis of the relationship between the Brillouin gain coefficient and the strain in the optical-fiber sensors

The relation between the power of the Brillouin signal and the strain is one of the bases of the distributed fiber sensors of temperature and strain. The coefficient of the Bfillouin gain can be changed by the temperature and the strain that will affect the power of the Brillouin scattering. The relation between the change of the Brillouin gain coefficient and the strain is thought to be linear by many researchers. However, it is not always linear based on the theoretical analysis and numerical simulation. Therefore, errors will be caused if the relation between the change of the Brillouin gain coefficient and the strain is regarded as to be linear approximately for measuring the temperature and the strain. For this reason, the influence of the parameters on the Brillouin gain coefficient is proposed through theoretical analysis and numerical simulation.     

Novel fiber-optical interferometer with miniaturized probe for in-hole measurements

Today, micro-system technology and the development of new MEMS （Micro-Electro-Mechanical Systems） are emerging rapidly. In order for this development to become a success in the long run, measurement systems have to ensure product quality. Most often, MEMS have to be tested by means of functionality or destructive tests. One reason for this is that there are no suitable systems or sensing probes available which can be used for the measurement of quasi inaccessible features like small holes or cavities. We present a measurement system that could be used for these kinds of measurements. The system combines a fiber optical, miniaturized sensing probe with low-coherence interferometry, so that absolute distance measurements with nanometer accuracy are possible.     

Development of the readout system for waveguide multilayer optical card

Waveguide multilayer optical card （WMOC） is a novel storage device of three-dimensional optical information. An advanced readout system fitting for the WMOC is introduced in this paper. The hardware mainly consists of the light source for reading, WMOC, motorized stages addressing unit, microscope imaging unit, CCD detecting unit and PC controlling ＆ processing unit. The movement of the precision motorized stage is controlled by the computer through Visual Basic （VB） language in software. A control panel is also designed to get the layer address and the page address through which the position of the motorized stages can be changed. The WMOC readout system is easy to manage and the readout result is directly displayed on computer monitor.     

Study of waveguide coupling efficiency in hybrid silicon lasers

This paper presents a new method to increase the waveguide coupling efficiency in hybrid silicon lasers. We find that the propagation constant of the InGaAsP emitting layer can be equal to that of the Si resonant layer through improving the design size of the InP waveguide. The coupling power achieves 42% of the total power in the hybrid lasers when the thickness of the bonding layer is 100 nm. Our result is very close to 50% of the total power reported by Intel when the thickness of the thin bonding layer is less than 5 nm. Therefore, our invariable coupling power technique is simpler than Intel＇s.     

A method for calculating the center position of collimated light

It is a key problem to accurately calculate beam spots＇ center of measuring the warp by using a collimated laser. A new method, named double geometrical center method （DGCM）, is put forward for the first time. In this method, a plane wave perpendicularly irradiates an aperture stop, and a charge couple device （CCD） is employed to receive the diffraction-beam spots, then the geometrical centers of the fast and the second diffraction-beam spots are calculated respectively, and their mean value is regarded as the center of datum beam. In face of such adverse instances as laser intension distributing defectively, part of the image being saturated, this method can still work well. What＇s more, this method can detect whether an unacceptable error exits in the courses of image receiving, processing and calculating. The experimental results indicate the precision of this method is high.     

Collinear phase-matching study of terahertz-wave generation via difference frequency mixed in GaAs and Inp

The collinearly phase-matching condition of terahertz-wave generation via difference frequency mixed in GaAs and InP is theoretically studied. In collinear phase-matching, the optimum phase-matching wave hands of these two crystals are calculated. The optimum phase-matching wave bands in GaAs and lnP are 0.95-1.38μm and 0.7-0.96μm respectively. The influence of the wavelength choice of the pump wave on the coherent length in THz-wave tuning is also discussed. The influence of the temperature alteration on the phase-matching and the temperature tuning properties in GaAs crystal are calculated and analyzed. It can serve for the following experiments as a theoretical evidence and a reference as well.     

Effects of the alloy compositions on the phonon-polaritons in ternary mixed crystals

Composition dependence of bulk and surface phonon-polaritons in ternary mixed crystals are studied in the framework of the modified random-element-isodisplacement model and the Bom-Huang approximation. The numerical results for Several Ⅱ - Ⅵ and Ⅲ- Ⅴ compound systems are performed, and the polariton frequencies as functions of the compositions for ternary mixed crystals AlxGa1-xAs, GaPxAS1-x, ZnSxSe1-x, GaAsxSb1-x, GaxIn1-xP, and ZnxCd1-xS as examples are given and discussed. The results show that the dependence of the energies of two branches of bulk phonon-polaritons which have phonon-like characteristics, and surface phonon-polaritons on the compositions of ternary mixed crystals are nonlinear and different from those of the corresponding binary systems.