Thermal expansion studies on Th(MoO4)2, Na2Th(MoO4)3 and Na4Th(MoO4)4

Thermal expansion behavior of Th(MoO₄)₂, Na₂Th(MoO₄)₃ and Na₄Th(MoO₄)₄ was studied under vacuum in the temperature range of 298–1123 K by high temperature X-ray diffractometer. Th(MoO₄)₂ was synthesized by reacting ThO₂ with 2 mol of MoO₃, at 1073 K in air and Na₂Th(MoO₄)₃ and Na₄Th(MoO₄)₄ were prepared by reacting Th(MoO₄)₂ with 1 and 2 mol of Na₂MoO₄, respectively at 873 K in air. The XRD data of Th(MoO₄)₂ was indexed on orthorhombic system where as XRD data of Na₂Th(MoO₄)₃ and Na₄Th(MoO₄)₄ were indexed on tetragonal system. The lattice parameters and cell volume of all the three compounds, fit into polynomial expression with respect to temperature, showed positive thermal expansion (PTE) up to 1123 K. The average value of thermal expansion coefficients for Th(MoO₄)₂, Na₂Th(MoO₄)₃ and Na₄Th(MoO₄)₄ were determined from the high temperature data.     

The ternary system Na2O–ZnO–WO3: Compounds and phase relationships

The subsolidus phase relationships of ternary system Na₂O–ZnO–WO₃ have been investigated by X-ray diffraction (XRD) and differential thermal analyzer (DTA). All the samples were synthesized in the temperature range from 530 to 850 °C in air. There are one ternary compound and five binary compounds in the Na₂O–ZnO–WO₃ system, which can be divided into eight three-phase regions. The crystal structure of the ternary compound Na_3.6Zn_1.2(WO₄)₃ is determined by single-crystal structure analysis method. It belongs to triclinic system with space group and lattice constants a = 7.237 (5) Å, b = 9.172 (6) Å, c = 9.339 (6) Å and  = 94.920 (4)°, β = 105.772 (9)°, γ = 103.531 (8)°, Z = 2. DTA analyses indicate that the compound Na₂WO₄ is not suitable to be the flux for ZnO crystal growth below 1250 °C, since no liquidus was observed in the system before 1250 °C.     

Optical absorption and spectroscopic characteristics of Tm ions doped NaY(MoO4)2 crystal

The polarized absorption and emission spectra have been measured for the Tm³⁺ doped NaY(MoO₄)₂ crystal and spectral parameters have been estimated from the absorption data based on the Judd–Ofelt theory. The effective intensity parameters (t = 2, 4, 6) are 11.67 ×10⁻²⁰, 2.21 × 10⁻²⁰, 1.74 × 10⁻²⁰ cm², respectively. From the intensity parameters, the radiative transition probabilities, radiative lifetimes, branching ratios and the emission cross-section have been calculated. In comparison with other Tm³⁺ doped laser crystals, Tm³⁺:NaY(MoO₄)₂ crystal has potential as a promising laser crystal.     

Structural investigation of the alluaudite-like mixed-valence iron phosphate: Na1.25Mg1.10Fe1.90(PO4)3

A new mixed-valence iron phosphate Na_1.25Mg_1.10Fe_1.90(PO₄)₃ has been synthesized as single crystals by a flux technique and its structure has been refined from X-ray data to a residual R₁ = 0.032. The compound crystallizes in the monoclinic space group C2/c with the parameters: a = 11.7831(3) Å, b = 12.4740(3) Å, c = 6.3761(2) Å, β = 113.643(2)° and Z = 4. The structure belongs to the alluaudite structural type, and thus it obeys to the X(2)X(1)M(1)M(2)₂(PO₄)₃ general formula. The X(2) and X(1) sites are occupied by sodium while the M(1) and M(2) sites feature a statistical distribution of iron and magnesium.

Additional information about the cation distribution has been extracted from a Mössbauer spectroscopy study which confirmed the mixed valency of the compound. A magnetic susceptibility study has also been undertaken and has shown the compound to be antiferromagnetic with a Neel temperature of about 35 K.     

Mechanical properties and oxidation behaviour of two-phase iron aluminium alloys with Zr(Fe,Al)2 Laves phase or Zr(Fe,Al)12 τ1 phase

Two-phase Fe-rich Fe–Al–Zr alloys have been prepared consisting of binary Fe–Al with a very low solubility for Zr and the ternary Laves phase Zr(Fe,Al)₂ or τ₁ phase Zr(Fe,Al)₁₂. Yield stress, flexural fracture strain, and oxidation behaviour of these alloys have been studied in the temperature range between room temperature and 1200 °C. Both the Laves phase and the τ₁ phase act as strengthening phases increasing significantly the yield stress as well as the brittle-to-ductile transition temperature. Alloys containing disordered A2+ ordered D0₃ Fe–Al show strongly increased yield stresses compared to alloys with only A2 or D0₃ Fe–Al. The binary and ternary alloys with about 40at.% Al and 0 or 0.8at.% Zr show the effect of vacancy hardening at low temperatures which can be eliminated by heat treatments at 400 °C. At higher Zr contents this effect is lost and instead an increase of low-temperature strength is observed after the heat treatment. The increase of the high-temperature yield strength of Fe-40at.% Al by adding Zr is much stronger than by other ternary additions such as Ti, Nb, or Mo. Tests on the oxidation resistance at temperatures up to 1200 °C indicate a detrimental effect of Zr already for additions of 0.1at.%.     

Subsolidus phase relations in the ZnO–MoO3–B2O3, ZnO–MoO3–WO3 and ZnO–WO3–B2O3 ternary systems

The subsolidus phase relations in the ZnO–MoO₃–B₂O₃, ZnO–MoO₃–WO₃ and ZnO–WO₃–B₂O₃ ternary systems have been investigated by the means of X-ray powder diffraction (XRD). There is no ternary compound in all the systems. There are five binary compounds and five tie lines in the ZnO–MoO₃–B₂O₃ system. This system can be divided into six 3-phase regions. There are three binary compounds and three tie lines in the ZnO–MoO₃–WO₃ system. This system can be divided into four 3-phase regions. There are four binary compounds and four tie lines in the ZnO–WO₃–B₂O₃ system. This system can be divided into five 3-phase regions. The possible component regions for ZnO single crystal flux growth were discussed. The phase diagram of Zn₃B₂O₆–ZnWO₄ pseudo-binary system has been constructed, and the result reveals this system is eutectic system. The eutectic temperature is 1007 °C and eutectic point component is 70 mol% Zn₃B₂O₆.     

Spectroscopy, magnetism and non-radiative processes in heteronuclear Cu:Pr squarate; [Pr2Cu(C4O4)4(H2O)16]·2H2O

In the present work, the spectroscopic and magnetic properties of heteronuclear Cu:Pr squarate are reported. Single crystals of [Pr₂Cu(C₄O₄)₄(H₂O)₁₆]·2H₂O were obtained by reaction of squaric acid, praseodymium chloride and copper chloride in water solution according to the procedure described earlier. The crystals of title compound are isomorphic with [La₂Cu(C₄O₄)₄(H₂O)₁₆]·2H₂O crystal, where squarate anions participate as bridging ligands between metal ions.

The UV region of absorption spectra of the title compound is dominated by C–T band of Cu(II), f–d transition of Pr(III) and internal π–π*(A_1g→E_u) and π–π*(A_1g→E_g) ligand transitions. In visible and IR regions, t_2g–e_g of copper Cu(II) as well as ³H₄→³P_J, ¹D₂, ¹G₄, ³F_J, ³H₆ Pr(III) transitions at 293 and 4 K were recorded. At low temperature splitting given by Jahn–Teller effect can be observed. Significant anisotropy of d–d transitions intensities confirms well the Jahn–Teller effect, too. Unexpectedly high intensity of ³H₄→¹G₄ transition is probably due to the intensity borrowing from the Cu (II) d–d transition.

The ³P₀ and ¹D₂ emission of Pr(III) in the [Pr₂Cu(C₄O₄)₄(H₂O)₁₆]·2H₂O crystals is quenched even at 77 K. Whereas emission of appropriate polynuclear europium squarate was detected. The pathways of excited state quenching by e_g levels of Cu(II), multhiphonon relaxation and concentration quenching can be considered in the system under studies. Magnetic susceptibility measurements were carried out in 300–1.7 K temperature range and are discussed in relation to the structure.

Effect of the polymeric structure on spectroscopic behaviour is presented. Selectivity of polymeric europium squarate in vitro test for different tumor cells is shown.     

Ionic conductivity and Raman investigations on the phase transformations of Na4P2O7

The ionic conductivity and thermo-Raman spectra of anhydrous sodium pyrophosphate Na₄P₂O₇ were measured dynamically in the temperature range from 25 to 600 °C with a heating rate of 2 °C min⁻¹ to understand the structural evolution and phase transformation involved. The DSC thermogram was also measured in the same thermal process for the phase transformation investigation. The spectral variations observed in the thermo-Raman investigation indicated the transformation of Na₄P₂O₇ from low temperature phase () to high temperature phase () proceeded through pre-transitional region from 75 to 410 °C before the major orientational disorder at 420 °C and minor structural modifications at 511, 540 and 560 °C. The activation energies and enthalpies of the proposed phase transformations were determined. The possible mechanism for temperature dependent conductivity in Na₄P₂O₇ was discussed with the available data.     

Subsolidus phase relation in the system ZnO–Li2O–MoO3

The subsolidus phase relation of the system ZnO–Li₂O–MoO₃ has been investigated by X-ray diffraction (XRD) analyses. The phase diagram has been constructed. There are six binary compounds and one ternary compound in this system. The phase diagram comprises nine three-phase regions. The ternary compound Li₂Zn₂(MoO₄)₃ is refined by the Rietveld method. It belongs to an orthorhombic system with space group Pnma and lattice constants a = 5.1114 Å, b = 10.4906 Å, c = 17.6172 Å.     

Crystal structures and structural relationships of KFe2(SeO2OH)(SeO3)3 and SrCo2(SeO2OH)2(SeO3)2

The new phases KFe₂(SeO₂OH)(SeO₃)₃ and SrCo₂(SeO₂OH)₂(SeO₃)₂ have been synthesized under low-hydrothermal conditions and their structures were determined by single-crystal X-ray methods. Both compounds are monoclinic; KFe₂(SeO₂OH)(SeO₃)₃: space group P2, A = 9.983(4), B = 5.270(1), C = 10.614(4) Å, β = 97.42(2)°, V = 553.7 ų, Z = 2; SrCo₂(SeO₂OH)₂(SeO₃)₂: space group P2ln, A = 14.984(2), B = 5.286(1), C = 13.790(2) Å, β = 94.72(1)°, V = 1088.5 ų , Z = 4. The refinements converged to R-values of 2.9 and 3.6% respectively.

The atomic arrangement in KFe₂(SeO₂OH)(SeO₃)₃ and SrCo₂(SeO₂OH)₂(SeO₃)₂ is based on isolated MO₆ octahedra (M = Fe³⁺, Co²⁺), which are corner-linked via trigonal pyramidal selenite groups to a framework structure. Interstitials are occupied by potassium or strontium atoms in ten- or eight-coordination respectively, and by the lone-pair electrons of the Se⁴⁺ atoms. Both compounds are not isotypic but are closely related and may be interpreted as different distortions of an idealized structure type in space group P2/m, which was modelled for a theoretical compound SrFe₂(SeO₃)₄ by distance least squares refinement (program ).     

Red photoluminescence and morphology of Eu doped Ca3La3(BO3)5 phosphors

Europium doped phosphors Ca₃La₃(BO₃)₅ were first synthesized by a sol–gel process technique. The reaction temperature of the sol–gel process was 300 °C lower than that of the solid-state reaction and the reaction time of the sol–gel process was shorter. The photoluminescence properties of Eu³⁺ doped Ca₃La₃(BO₃)₅ indicated that the phosphors exhibited a strong luminescence of ⁵D₀–⁷F₂ transition at 612 nm under the excitation at 237 nm. The emission intensity of the phosphors prepared by the sol–gel process was higher than those prepared by the solid-state reaction. The relationship between optical properties and morphologies were studied. In particular, Li⁺ ion doping effectively enhanced the luminescent properties of the Eu³⁺ doped Ca₃La₃(BO₃)₅ phosphors. The highest brightness was observed in the phosphor Ca₃La_2.82Eu_0.1Li_0.08B₅O_15−δ prepared by the sol–gel process.     

Solvents for growing Al2(WO4)3 single crystals from high-temperature solutions

The crystallization conditions of Al₂(WO₄)₃ from Li₂O–WO₃ solvents (molar ratio 30.0:70.0, 32.5:67.5, 35.0:65.0, 45.0:55.0 and 55.0:45.0) as well as from Na₂O–WO₃ solvents (molar ratio 25.0:75.0, 27.5:72.5, 30.0:70.0 and 32.5:67.5) have been investigated. The concentration and temperature regions of crystallization of Al₂(WO₄)₃ and the density, viscosity as well as the solution losses due to evaporation have been established. On the basis of the data obtained it has been concluded that the most suitable solvent for growing Al₂(WO₄)₃ single crystals is Na₂O–WO₃ with a molar ratio of 27.5:72.5.     

Synthesis, crystal structure and thermal decomposition mechanism of the complex [Sm(p-BrBA)3bipy·H2O]2·H2O

Thermodynamic activities of aluminum in the iron–aluminum system were determined between about 720 and 850 K for the composition range between 23 and 33 at.% Al which includes the D0₃-ordered nonstoichiometric intermetallic compound Fe₃Al. For this purpose an electromotive force method with a single-crystal CaF₂ electrolyte was used, and the following cell arrangement was employed:

(−)Pt|Ir|Al_0.85Sn_0.15, Na₃AlF₆|CaF₂|Al_1±xFe_3±x, Na₃AlF₆|Ir|Pt (+).

Activities of iron were obtained by means of a Gibbs-Duhem integration for the same composition range. The results of the activity measurements were interpreted in terms of a statistical–thermodynamic model for nonstoichiometric phases with the D0₃-superstructure based on defect formation energies from the literature. It was found that non-stoichiometry in Fe₃Al is caused by anti-structure atoms on two of the three possible sublattices.     

Preparation of nano-sized SrAl2O4 using an amorphous hetero-nucleus complex as a precursor

Nano-crystalline SrAl₂O₄ with spinel structure was successfully prepared at 700 °C using amorphous SrAl₂(diethylenetriaminepentaacetic acid (DTPA)_1.6)(H₂O)₄ as precursor. The precursor was synthesized by a simple inorganic reaction and decomposed into SrAl₂O₄ at temperatures above 500 °C, which was proved by DTA–TGA and X-ray photoelectron spectroscopy (XPS) analysis. X-ray diffraction (XRD) results illustrated that a crystalline SrAl₂O₄ phase can form at 700 °C, which is about 600 °C lower than that used in the traditional method. The crystalline SrAl₂O₄ prepared at 900 °C for 2 h had a crystal size of about 28 nm and a grain size of about 80 nm, and its BET surface area can reach 28.056 m²/g. Calcination temperature and time had a weak effect on crystal size.     

Kinetic study on Li2.8(V0.9Ge0.1)2(PO4)3 by EIS measurement

Kinetics for lithium ion transfers in the fast ionic conductor Li_2.8(V_0.9Ge_0.1)₂(PO₄)₃ prepared by solid-state reaction method has been studied by electrochemical impedance spectroscopy (EIS) at various temperatures and the results were correlated with observed cathodic behavior. The specific conductivities of Li_x(V_0.9Ge_0.1)₂(PO₄)₃ (x = 0.9–2.8) versus temperatures were analyzed from blocking-electrodes by Wagner's polarization method and the activation energy was calculated. It was observed that electronic conductivities of Li_x(V_0.9Ge_0.1)₂(PO₄)₃ increased with lithium contents in the materials. The compounds show a reversible capacity of 131 mAh g⁻¹ at low current density (13 mA g⁻¹). Modeling the EIS data with equivalent circuit approach enabled the determination of charge transfer and surface film resistances. The Li ion diffusion coefficient (D_Li⁺) versus voltage plot shows three valleys during the first charge cycle coinciding with the irreversible plateau of the voltage versus lithium content profiles reflecting the irreversible phase change in the compound. The obtained D_Li⁺ from EIS varies within 10⁻⁸ to 10⁻⁷ cm² s⁻¹, so Li_2.8(V_0.9Ge_0.1)₂(PO₄)₃ shows excellent chemical diffusion performance.     

Microwave-assisted synthesis of CaMoO4 nano-powders by a citrate complex method and its photoluminescence property

Nano-sized CaMoO₄ powders, which have scheelite type structure, were successfully synthesized at low temperatures by a modified citrate complex method using microwave irradiation. The citrate complex precursors were heat-treated at temperatures from 300 to 700 °C for 3 h. Crystallizations of the CaMoO₄ nano-sized powders were detected at 400 °C, and entirely completed at a temperature of 500 °C. Almost nano-powders of CaMoO₄ heat-treated between 400 and 600 °C showed primarily spherical and homogeneous morphology. The average crystalline sizes of CaMoO₄ were 12–27 nm at temperatures of 400–700 °C, showing an ordinary tendency to increase with the temperatures. The CaMoO₄ powders prepared at 600 °C showed the strongest photoluminescence intensity.     

Preparation of neodymium sulphides by the reaction of Nd2(So4)3 with carbon disulphide

The reaction to synthetize neodymium sulphides from neodymium sulphate octahydrate in a stream of carbon disulphide gas was studied. The dehydration of the octahydrate in vacuum was finished at 300 °C. At 1050–1100 °C in air neodymium oxysulphide, Nd₂O₂SO₄, was formed. Neodymium oxysulphide, Nd₂O₂S, was formed upon heating with a reducing agent such as annealed carbon. The reaction of neodymium sulphate with carbon disulphide commenced at 500–600 °C, resulting in formation of the disulphide, NdS₂. The crystal structure of NdS₂ heated at 500 °C was, however, different from that of the sample heated at 600 °C. In the temperature range 800–900 °C -Nd₂S₃ was obtained as a single phase after heating for at least 3 h in high flow rates of gas mixtures of nitrogen and high concentrations of carbon disulphide. The sesquisulphide, γ-Nd₂S₃ (or Nd₃S₄), was formed at temperatures as high as 1100 °C. The reaction conditions for the compounds mentioned above are discussed together with the analysis of their crystal structures by X-ray powder diffractometry.     

Ba4In2−x(CO3)1+xO6−2.5x and Ba4In0.8Cu1.6(CO3)0.6O6.2—new indium oxycarbonates closely related to n=3 Ruddlesden–Popper phases

Investigations of phase relations in the Ba-rich part of the In₂O₃–BaO(CO₂)–CuO pseudo-ternary system at 900 °C have revealed the existence of new indium–copper oxycarbonate – Ba₄In_0.8Cu_1.6(CO₃)_0.6O_6.2. Rietveld refinement of the X-ray powder diffraction data combined with infrared studies gives evidence that this phase is a oxycarbonate crystallising in the tetragonal structure (space group I4/mmm) with unit cell parameters: a=4.0349(1) Å and c=29.8408(15) Å. In the binary part of the In₂O₃–BaO(CO₂) system we have identified the occurrence of Ba₄In_2−x(CO₃)_1+xO_6−2.5x oxycarbonate solid solution showing a crystal structure also described by I4/mmm space group, but with the unit cell parameters: a=4.1669(1) Å and c=29.3841(11) Å for x=1. The existence range of this phase, −0.153<x<0.4, includes chemical compositions of earlier found phases: Ba₅In_2+xO_8+0.5x with 0≤x≤0.45 (known as the -solid solution), as well as the binary Ba₄In₂O₇ phase. The crystal structures of both new oxycarbonates are isomorphic and related to n=3 member of the Ruddlesden–Popper family.     

钼酸钠和三乙醇胺对Q235碳钢小孔腐蚀的抑制作用

通过动电位扫描,微区电位扫描,电化学阻抗谱及XPS等技术,考察了Na₂MoO₄和三乙醇胺 (TEA) 复配缓蚀剂对Q235碳钢孔蚀的抑制作用。结果表明：Q235碳钢在0.02 mol/L NaCl+0.1 mol/L NaHCO₃溶液中,适量的Na₂MoO₄与TEA复配对其孔蚀的抑制作用要优于单独使用Na₂MoO₄对孔蚀的抑制效果。在外加恒电位为0.3 V时,在实验溶液中碳钢表面有活性点被激活,Na₂MoO₄+TEA复配缓蚀剂能够明显抑制表面活性点的生成,并且能使形成的活性点的电位峰值迅速降低,抑制其向腐蚀小孔的转化。在加有Na₂MoO₄+TEA复配缓蚀剂的实验溶液中形成的缓蚀膜主要成分为Fe₂(MoO₄)₃,Fe₂O₃和TEA,三乙醇胺的吸附可以改善钼酸盐缓蚀膜的致密性,进一步提高缓蚀性能。     

Structural and electrical properties of SrBi2(Ta0.5Nb0.5)2O9 thin films

SrBi₂(Ta_0.5Nb_0.5)₂O₉ (SBTN) thin films were obtained by polymeric precursor method on Pt/Ti/SiO₂/Si(1 0 0) substrates. The film is dense and crack-free after annealing at 700 °C for 2 h in static air. Crystallinity and morphological characteristic were examined by X-ray diffraction (XRD), field emission scanning electron microscopy (FEG-SEM) and atomic force microscopy (AFM). The films displayed rounded grains with a superficial roughness of 3.5 nm. The dielectric permittivity was 122 with loss tangent of 0.040. The remanent polarization (P_r) and coercive field (E_c) were 5.1 μC/cm² and 96 kV/cm, respectively.