国务院文件摘要

国务院文件摘要１９８９年１０月２７日国务院发出国发（１９８９）７５号文件，文件指出：建立统一代码标识制度，是国家发挥监督管理体系整体效能、强化管理的一项改革。希望各地区、各部门协同一致，共同努力，尽快把“统一代码标识制度”在全国范围内全面地建立起来国...     

福建省组织机构代码年度验证制度改革探索

《国务院机构改革和职能转变方案》确定我国统一社会信用代码制度以公民身份证号码和组织机构代码（以下简称“代码”）为基础。代码数据质量事关我国社会信用体系建设的成效。实施代码年度验证制度是确保代码数据质量的重要手段。文中分析在新的历史条件下,改革福建省代码年度验证制度的必要性,实施代码网上年度申报的意义。     

关于组织机构代码网络建设的技术分析与模式探讨

建立组织机构代码标识制度,是根据国务院的决定并依据GB 11714《全国组织机构代码编制规则》,由各级代码主管机关(质量技术监督部门)为每个企事业单位、社会团体、党政机关及民办非企业单位赋予一个在全国范围内唯一的、始终不变的、符合国家关于机构代码编制规则的法定代码标识。建立这项制度的主要工作归纳起来有四个方面:一是赋予各组织机构一个法定的代码标识:二是根据国家信息标准化的有关规定采集和处理各组织机构的基本信息:三是建立和维护代码信息管理系统;四是为代码标识在社会各领域的推广应用提供技术支撑。 随着电子计算机的广泛应用,政府     

浅谈代码信息的时效性与推广应用

实施统一代码标识制度目的在于应用,只有最大限度地推广应用代码标识和开发利用相关信息,才能充分发挥代码标识制度在政府宏观管理和经济建设中的作用。组织机构统一代码是由各级代码主管部门赋于每一个合法成立的组织机构一个全国范围内唯一、始终不变的法定代码标识,在赋于代码的同时采集了该单位相关的公共信息,并建立了代码数据     

我省统一代码标识制度工作的现状、问题与对策

国务院于1989年决定在全国范围内全面建立组织机构统一代码标识制度。建立这项制度的主要工作有三个方面:一是各类组织机构公用项数据的采集,二是代码的赋予与颁证,三是代码信息数据库的建立与应用。我省于1993年4月部署开展这项工作。几年来我省的这项工作取得了显著成效,主要表现在:     

建立代码标识制度 加快安徽现代化进程

建立代码标识制度　加快安徽现代化进程安徽省副省长张润霞“统一代码标识制度”是由国家技术监督部门给每个机关、企事业单位和社会团体颁发的一个在全国范围内唯一的、始终不变的法定代码标识。目前，我国对机关、企事业单位和社会团体的管理是通过各职能部门按“条条”...     

浅谈村民委员会组织机构代码的管理

1989年国家质量技术监督局根据国务院的要求决定在全国建立“统一代码标识制度(?),即在全国范围内给所有依法成立的组织机构赋予一个在全国范围内帷一的、始终不变的法定代码标识,颁发组织机构代码证,利用它为各级政府加强行政管理,监督组织机构的社会经济行为提供有效的技术手段,     

提高代码数据库的质量扩大代码的应用领域

实现组织机构代码标识制度的目的就是为了规范我国各种组织机构的社会经济行为，加快社会信息化的进程，与国际惯例接轨，推动我国一系列涉及经济信息化的重大工程项目的实现。目前，代码已被广泛应用于税务、银行、公安、统计、海关等部门，代码数据库的建立为政府部门的宏观管理和决策提供了准确的信息依据，为部门之间的信息共享和数据传递发挥了重要作用。     

应用组织机构代码实现信息共享助力首都社会管理

建立组织机构代码标识制度,对我国每个依法成立的组织机构赋予一个唯一的、始终不变的代码,是我国发挥监督管理体系整体效能、强化管理的一项改革,也是我国信息化建设中的电子政务、电子商务和诚信体系建设的基础。对当前我国市场经济中出现的走私、骗税、冒用、恶意欠债等不法行为,再出以重拳打击的同时,利用组织机构代码为标识建立起的"组织机构检索系统共享平台",查询不法分子的登记信息,将有效地控制不法分子的违法行为,助力首都社会的监督和管理。     

建立统一代码标识制度是推进EDI应用的技术基础工作

本文从EDI的标准化特征及对支撑环境的要求,分析了EDI与组织机构代码标识制度的关联因素,论述了建立统一代码标识制度是推进EDI的技术基础工作的观点。     

Insertion of triangulated surfaces into a meccano tetrahedral discretization by means of mesh refinement and optimization procedures

In this paper, we present a new method for inserting several triangulated surfaces into an existing tetrahedral mesh generated by the meccano method. The result is a conformal mesh where each inserted surface is approximated by a set of faces of the final tetrahedral mesh. First, the tetrahedral mesh is refined around the inserted surfaces to capture their geometric features. Second, each immersed surface is approximated by a set of faces from the tetrahedral mesh. Third, following a novel approach, the nodes of the approximated surfaces are mapped to the corresponding immersed surface. Fourth, we untangle and smooth the mesh by optimizing a regularized shape distortion measure for tetrahedral elements in which we move all the nodes of the mesh, restricting the movement of the edge and surface nodes along the corresponding entity they belong to. The refining process allows approximating the immersed surface for any initial meccano tetrahedral mesh. Moreover, the proposed projection method avoids computational expensive geometric projections. Finally, the applied simultaneous untangling and smoothing process delivers a high‐quality mesh and ensures that the immersed surfaces are interpolated. Several examples are presented to assess the properties of the proposed method.     

Certification Institutions Expected to Update and Transfer Information on Present Standards

Standards are the basis for production enterprises to organize production, ex-factory inspection, trade (delivery) and technical exchanges, product certification, quality arbitration and supervision.……     

Flow calorimeter for enthalpy increment measurements on condensed gases

A flow calorimeter for enthalpy increment measurements on condensed gases is presented. A better knowledge of the properties of the liquefied natural gas is needed, and therefore a liquid loop has been designed for our flow calorimeter. The fluid loop in the calorimeter is designed in order to avoid the two-phase region, since two phases would give compositional disturbances in the measurements. The avoidance of the two-phase region is made possible by increasing the pressure of the test fluid after the measurement section, then heating the fluid at super-critical pressure past the critical point. Finally, the fluid is throttled to the low-pressure gas state at the inlet condition of the compressor that circulates the fluid. To perform the pressure increase, a new cryogenic pump has been designed. To evaluate the new equipment, measurements were taken on liquid ethane over the temperature range 146–256 K at pressure between 0.9 and 5.1 MPa.     

Refrigerators Enter a New Era of Health Preservation Frestech initiates the establishment of China's first standard for household sterilization refrigerators

On November 30, 2007, the China Association for Standardization (CAS) held a press conference at Beijing Diaoyutai State Guest House. Leaders from the China Household Electric Appliance Research Institute, the China Household Electric Appliance Association, and the China Consumers' Association attended and made speeches.……     

Optimum-Simulation von Ernteprozessen

Zusammenfassung Bei der Gestaltung von Ernteprozessen — beispielsweise des Prozesses Mähdrusch, Körnertransport und -abnahme — als transportverbundene Fließarbeitsverfahren mit mindestens zwei verschiedenen Arbeitsmitteln gibt es einen großen Optimierungsspielraum. Solche Prozesse sind mehrstufige Bedienungsprozesse mit gemischter Anordnung der Bedienungseinrichtungen. Außerdem besitzen sie stark ausgeprägte räumliche Aspekte. Es wird vor allem gezeigt, welche Merkmale solcher Prozesse in Simulationsmodellen abgebildet sein müssen, welche Zielgrößen in Abhängigkeit von welchen Einflußgrößen unter Berücksichtigung welcher Prozeßbedingungen ermittelt werden sollten und wie der Bewertungsprozeß zur Ermittlung der gewünschten Informationen gestaltet werden muß.     

A study of centrifugal cast high boron high speed steel

In the present study a high‐boron high speed steel (HSS) roll material was designed. Many expensive alloy elements have been substituted by cheap boron alloy, and high‐boron high speed steel roll has been manufactured by centrifugal casting method. The microstructures, mechanical properties and wear resistance of centrifugal casting high‐boron high speed steel roll have been investigated by optical microscopy (OM), scanning electron microscopy (SEM), and X‐ray diffraction (XRD) analysis, hardness test, impact test and wear test. The results indicated that the solidification microstructures of high‐boron high speed steel roll consisted of M₂(B,C), (W,Mo)₂(B,C), M₃(B,C), M₂₃(B,C)₆ type borocarbides and martensite, a small amount of retained austenite. Borocarbides were continuously distributed over the grain boundary. After quenching from 1050 °C, local broken network appeared in partial borocarbides, and fine secondary borocarbide precipitated from the matrix. After tempering from 525 °C, the amount of precipitated borocarbide increased significantly. After heat treatment, the hardness of high‐boron high speed steel roll excelled 60 HRC, and its impact toughness excelled 8.0 J/cm². The single groove steel rolling amount of high‐boron high speed steel rolls increases by 500% than that of bainite cast iron roll, when the rolls are used in K₁ mill housing of bar mill.     

Thixotropy of Systems with Shear Thinning and Plastic Flow Behavior

The definition of the thixotropy is a decrease in viscosity with time in shear and a subsequent recovery of viscosity after the shear deformation is removed.We ...     

Brainstorming for ISO Strategy 2016-2020

正Responding to ISO’s appeal for survey for the to-be-developed ISO Strategy Plan for 2016-2020,SAC hosted a special workshop over the needs and comments of various fi elds on June 8 in Beijing.The workshop was attended by ISO President-elect and Ansteel General Manager Zhang Xiaogang,SAC Vice-Administrator Yu Xinli,and 30 experts from     

CNAS Passes APLAC's PTP Review

正The review group of Asia Pacific Laboratory Accreditation Cooperation(APLAC)carried out a 4-day peer review of the proficiency testing provider(PTP)for China National Accreditation Service for Conformity Assessment(CNAS)from July 28 to 31,2014.CNAS passed the PTP review with excellent performance.Two senior peer reviewers of APLAC made a comprehensive,rigorous and detailed review of CNAS’s PTP accreditation activities,and made the on-spot inspection of the review groups in Shanghai and Shenzhen respectively.