Modular Synthesis of Chiral Phosphine‐Phosphite‐Ligands from Phenolic Precursors: A New Approach to Bidentate Chelate Ligands Exploiting a P?O to P?C Migration Rearrangement

An efficient and modular approach to bidentate phosphine‐phosphite ligands formally derived from a 6‐alkyl‐2‐phosphanylphenol, a chiral diol and phosphorus trichloride has been developed. In a key step, a borane‐protected phosphinite, prepared from an o‐bromophenol by O‐phosphanylation, is reacted with n‐butyllithium to afford the corresponding ortho‐phosphanylphenol (as the stable borane adduct) through bromine‐lithium exchange and anionic migration rearrangement. Treatment with phosphorus trichloride in the presence of a base and subsequent reaction of the in situ formed dichlorophosphite with a chiral diol (such as TADDOL or BINOL) affords the target P,P ligands in good overall yield (up to 60% over 4 steps). In contrast to an earlier approach, the new methodology is very general and tolerates bulky ortho‐substituents. The reliability of the operationally convenient protocol was demonstrated in the synthesis of a library of 16 new phosphine‐phosphite ligands, starting from different ortho‐alkylphenols. The modular concept opens a rapid access to a broad variety of ligands and might be useful in the search for and structural optimization of suitable ligands for specific chirogenic transition metal‐catalyzed transformations.     

A Modular Furanoside Thioether‐Phosphite/Phosphinite/ Phosphine Ligand Library for Asymmetric Iridium‐Catalyzed Hydrogenation of Minimally Functionalized Olefins: Scope and Limitations

A highly modular furanoside thioether‐phosphite/phosphinite/phosphine ligand library has been synthesized for the iridium‐catalyzed asymmetric hydrogenation of minimally functionalized olefins. These ligands can be prepared efficiently from easily accessible D ‐(+)‐xylose. We found that their effectiveness at transferring the chiral information in the product can be tuned by correctly choosing the ligand components. Enantioselectivities were therefore excellent (ees up to 99%) in a wide range of E‐ and Z‐trisubstituted alkenes using 5‐deoxyribofuranoside thioether‐phosphite ligands. It should be pointed out that these catalysts are also very tolerant to the presence of a neighbouring polar group. For 1,1‐disubstituted substrates, both enantiomers of the hydrogenation product can be obtained in high enantioselectivities simply by changing the configuration of the biaryl phosphite moiety. The asymmetric hydrogenation was also performed using propylene carbonate as solvent, which allowed the iridium catalysts to be reused while maintaining the excellent enantioselectivities.     

Modular Furanoside Phosphite‐Phosphoroamidites,a Readily Available Ligand Library for Asymmetric Palladium‐Catalyzed Allylic Substitution Reactions. Origin of Enantioselectivity

A library of furanoside phosphite‐phosphoroamidite ligands has been synthesized and screened in the palladium‐catalyzed allylic substitution reactions of several substrate types. These series of ligands can be prepared efficiently from easily accessible D ‐xylose and D ‐glucose. Their modular nature enables the position of the phosphoroamidite group, configuration of C‐3 of the furanoside backbone and the substituents/configurations in the biaryl phosphite/phosphoroamidite moieties to be easily and systematically varied. By carefully selecting the ligand components, therefore, high regio‐ and enantioselectivities (ees up to 98%) and good activities have been achieved in a broad range of mono‐ and disubstituted hindered and unhindered linear and cyclic substrates. The NMR studies on the palladium‐π‐allyl intermediates provide a deeper understanding about the effect of the ligand parameters on the origin of enantioselectivity. They also indicate that the nucleophilic attack takes place predominantly at the allylic terminal carbon atom located trans to the phosphoroamidite moiety.     

Rhodium‐Catalyzed Enantioselective Intramolecular [4+2] Cycloaddition using a Chiral Phosphine‐Phosphite Ligand: Importance of Microwave‐Assisted Catalyst Conditioning

The use of modular α,α,α′,α′‐tetraaryl‐1,3‐dioxolane‐4,5‐dimethanol (TADDOL)‐ and 1,1′‐bi‐2‐naphthol (BINOL)‐derived phosphine‐phosphite ligands (L₂*) in the asymmetric rhodium‐catalyzed intramolecular [4+2] cycloaddition (“neutral” Diels–Alder reaction) of (E,E)‐1,6,8‐decatriene derivatives (including a 4‐oxa and a 4‐aza analogue) was investigated. Initial screening of a small ligand library led to the identification of a most promising, TADDOL‐derived ligand bearing a phenyl group adjacent to the phosphite moiety at the arene backbone. In the course of further optimization studies, the formation of a new, more selective catalyst species during the reaction time was observed. By irradiating the pre‐catalyst with microwaves prior to substrate addition high enantioselectivities (up to 93% ee) were achieved. The new cyclization protocol was successfully applied to all three substrates investigated to give the bicyclic products in good yield and selectivity. ³¹P NMR and ESI‐MS measurements indicated the formation of a [Rh(L₂*)₂]⁺ species as the more selective (pre‐) catalyst.     

A Phosphite‐Pyridine/Iridium Complex Library as Highly Selective Catalysts for the Hydrogenation of Minimally Functionalized Olefins

A modular library of readily available phosphite‐pyridine ligands has been successfully applied for the first time in the iridium‐catalyzed asymmetric hydrogenation of a broad range of minimally functionalized olefins. The modular ligand design has been shown to be crucial in finding highly selective catalytic systems for each substrate. Excellent enantioselectivities (ees up to 99%) have therefore been obtained in a wide range of E‐ and Z‐trisubstituted alkenes, including more demanding triaryl‐substituted olefins and dihydronaphthalenes. This good performance extends to the very challenging class of terminal disubstituted olefins, and to olefins containing neighbouring polar groups (ees up to 99%). Both enantiomers of the reduction product can be obtained in excellent enantioselectivities by simply changing the configuration of the carbon next to the phosphite moiety. The hydrogenations were also performed using propylene carbonate as solvent, which allowed the iridium catalyst to be reused and maintained the excellent enantioselectivities.

     

tert‐Butanesulfinylphosphines: Simple Chiral Ligands in Rhodium‐Catalyzed Asymmetric Addition of Arylboronic Acids to Electron‐Deficient Olefins

An efficient rhodium complex catalyst system was developed by using a class of simple tert‐butanesulfinylphosphines as bidentate ligands, which solely bear sulfur chirality and combine the advantages of both sulfoxide and phosphine ligands. Excellent activities (in 0.5 hour, up to 99% yield) and enantioselectivities (up to 98% ee) were displayed in Rh‐catalyzed asymmetric 1,4‐additions under mild conditions.     

Synthesis of Chiral 2‐Hydroxy‐1‐methylpropanoates by Rhodium‐Catalyzed Stereoselective Hydrogenation of α‐(Hydroxymethyl)‐acrylate Derivatives

The synthesis of chiral 3‐hydroxy‐2‐methylpropanoic acid esters (e.g., “Roche ester” 3a ) based on the rhodium‐catalyzed stereoselective hydrogenation of Baylis–Hillman reaction products was investigated. Full conversions and enantioselectivities of up to 99% at a substrate/catalyst ratio of up to 500/1 were achieved by application of bisphospholanes of the catASium M series as ancillary ligands. An interesting kinetic resolution was observed by the diastereoselective hydroxy‐directed hydrogenation of related racemic β‐branched precursors affording mainly anti‐isomers with up to 96%ee.     

One Step Synthesis of Chiral Olefins via Asymmetric Diamination and their Applications as Ligands for Rhodium(I)‐Catalyzed 1,4‐Additions

A variety of acyclic chiral dienes were synthesized in a single step via palladium(0)‐catalyzed asymmetric allylic and homoallylic C H diamination of terminal olefins. The applications of such simple dienes as steering ligands for rhodium(I)‐catalyzed asymmetric 1,4‐additions afforded the corresponding adducts in excellent yields and up to 85% ee.     

A New Chiral P,N‐Ligand Derived from 1‐Phenylphospholane‐2‐carboxylic Acid (Phenyl‐P‐proline) for Palladium‐Catalyzed Asymmetric Allylic Substitution Reactions

New types of P,N‐ligands, cis‐ and trans‐ 3 , containing a tetrahydroisoquinoline skeleton as an N‐donor were synthesized from (1R,2S)‐1‐phenylphospholane‐2‐carboxylic acid (phenyl‐P‐proline, 1 ). The cis isomer, cis‐ 3 , was found to act as an excellent ligand in palladium‐catalyzed asymmetric allylic substitution reactions. The reactions of 1,3‐diphenyl‐2‐propenyl acetate ( 5 ) with several nucleophiles in the presence of [Pd(π‐allyl)Cl]₂, cis‐ 3 (Pd : ligand=1 : 2), and a base afforded the desired products in high yields with high enantioselectivity. It was suggested that these ligands did not serve as P,N‐bidentate ligands but as P‐monodentate ligands in these reactions.     

Enantioselective Vanadium‐Catalyzed Oxidation of 1,3‐Dithianes from Aldehydes and Ketones using β‐Amino Alcohol Derived Schiff Base Ligands

The asymmetric vanadium‐catalyzed oxidation of 1,3‐dithianes from aldehydes and ketones by β‐amino alcohol‐derived Schiff base ligands with two stereogenic centers was investigated. Using aqueous hydrogen peroxide as the oxidant and the Schiff base 3b as a chiral ligand, a variety of 1,3‐dithianes derived from aldehydes were easily converted into the corresponding mono‐sulfoxides in good yields (81–88%) with excellent enantioselectivities (up to 99% ee). Additionally, 99% ee was obtained for the enantioselective vanadium‐catalyzed oxidation of the 1,3‐dithianes derived from ketones. We found a slight kinetic resolution when using a higher ratio of hydrogen peroxide during the oxidation of the aldehyde‐derived 1,3‐dithianes but not in the ketone‐derived 1,3‐dithianes.     

Chiral Bis(N‐sulfonylamino)phosphine‐ and TADDOL‐Phosphite‐Oxazoline Ligands: Synthesis and Application in Asymmetric Catalysis

A series of N,P‐ligands has been prepared, containing a chiral oxazoline ring and as a second chiral unit a bis(N‐sulfonylamino)phosphine group embedded in a diazaphospholidine ring or a cyclic phosphite group derived from TADDOL. These modular ligands are readily synthesized from chiral amino alcohols and chiral 1,2‐diamines or TADDOLs. Palladium and iridium complexes derived from these ligands were found to be efficient catalysts for enantioselective allylic alkylation and olefin hydrogenation, respectively.     

Highly Diastereoselective Synthesis of Atropisomeric Bridged P,N‐Ligands and Their Applications in Asymmetric Suzuki–Miyaura Coupling Reaction

Three novel atropisomeric bridged P,N‐ligands were prepared using a highly efficient central‐to‐axial transfer strategy as the protocol. The new chiral ligands were successfully applied in the palladium‐catalyzed asymmetric Suzuki–Miyaura coupling reaction, Up to 98% yield and 82% ee were obtained in the enantioselective synthesis of axially chiral biarylphosphonates.     

Ferrocene‐Based Chiral Phosphine‐Triazines: A New Family of Highly Efficient P,N Ligands for Asymmetric Catalysis

The presence of the additional heterocyclic nitrogen atoms in chiral P,N ligands has an important influence on the asymmetric catalysis, and a clear trend was observed in the present research that the enantioselectivity and reactivity were significantly increased by raising the number of heterocyclic nitrogen atoms in these P,N ligands. Through finely tuning the number of heterocyclic nitrogen atoms, a new family of ferrocene‐based chiral phosphine‐triazine ligands with three heterocyclic nitrogen atoms has been developed and successfully applied in Pd‐catalyzed asymmetric allylic substitution. Up to 99% ee with 99% yield of allylic alkylation products and 94% ee of allylic amination products have been obtained by the use of ligand (R_c,S_p)‐ 1f with a 4,6‐diphenoxy‐1,3,5‐triazine moiety.     

Application of SDP Ligands for Pd‐Catalyzed Allylic Alkylation

Chiral spiro diphosphines (SDP) are efficient ligands for the Pd‐catalyzed asymmetric allylic alkylation of 1,3‐diphenyl‐2‐propenyl acetate with dimethyl malonate and related nucleophiles. The newly synthesized ligand DMM‐SDP ( 1e ) with 3,5‐dimethyl‐4‐methoxy groups on the P‐phenyl rings of the phosphine shows the highest enantioselectivity (up to 99.1% ee). Diethylzinc as a base is critical for obtaining high enantioselectivity in the allylic alkylation using β‐dicarbonyl nucleophiles. The structure of catalyst [PdCl₂((S)‐SDP)] was determined by single crystal X‐ray diffraction. The SDP ligands create an effective asymmetric environment around the palladium, resulting in high enantioselectivities for the asymmetric allylic alkylation reaction     

Binaphthol‐Based Diphosphite Ligands in Asymmetric Nickel‐Catalyzed Hydrocyanation of Styrene and 1,3‐Cyclohexadiene: Influence of Steric Properties

A series of chiral (R)‐binaphthol‐based diphosphite ligands with different substituents was prepared and applied in the asymmetric nickel‐catalyzed hydrocyanation of styrene and 1,3‐cyclohexadiene to investigate the influence of their steric properties. The optimum steric properties for the hydrocyanation reaction lie within a narrow window. With the optimized ligand, hydrocyanation of styrene gave full conversion (Subs/Ni=100) with 49 % ee, the TON was determined to be 600. Hydrocyanation of 1,3‐cyclohexadiene gave 50 % conversion (Subs/Ni=500) with an excellent ee of 86 %. This demonstrates that high ees are not only accessible for vinylarenes but also for conjugated dienes in the asymmetric nickel‐catalyzed hydrocyanation.     

First Modular Synthesis of Dissymmetric Biaryldiphosphine Ligands Allowing Tunable Steric and Electronic Effects

The first modular synthesis of a family of C₁‐symmetric diphosphine ligands is presented. Their synthesis is based on unprecedented highly regioselective halogen/metal interconversions on a common polybrominated biaryl precursor. This methodology allows the functionalization of the ortho‐ and ortho′‐positions of the biaryl core. Diphosphine ligands carrying only one substituent at the 6‐position and the two phosphine substituents at the 2‐ and 2′‐position become easily accessible. The two phosphine substituents may be identical (as in compounds 2 and 3 ) or different (as in compounds 1 and 4 ). All diphosphines were prepared on gram scale, and the enantiopure ligands were obtained by chromatography of the racemate on a chiral HPLC column. The asymmetric hydrogenation of β‐keto esters, acetamidocinnamates and dimethyl itaconate revealed good to excellent asymmetric inductions of up to 99 % ee, and are often close to those of the well‐known C₂‐symmetric MeO‐BIPHEP.     

Modular P?OP Ligands in Rhodium‐Mediated Asymmetric Hydrogenation: A Comparative Catalysis Study

Highly efficient and enantioselective hydrogenation reactions for α‐(acylamino)acrylates, itaconic acid derivatives and analogues, α‐substituted enol ester derivatives, and α‐arylenamides (25 substrates) catalyzed by chiral cationic rhodium complexes of a set of P OP ligands have been developed. The catalytic systems derived from these P OP ligands provided a straightforward access to enantiomerically enriched α‐amino acid, carboxylic acid, amine, and alcohol derivatives that are valuable chiral building blocks. Excellent efficiencies (full conversion in all cases) and extremely high enantiomeric excesses (94–99% ee) were achieved for a wide range of α‐substituted enol ester derivatives, regardless of the substitution pattern. The R‐oxy group of the ligand (methoxy or triphenylmethoxy) strongly influences the enantioselectivity and catalytic activity. Greater steric bulk around the metal centre correlated to greater (or similar) enantioselectivity, but also to slower hydrogenation. Furthermore, the hydrogenation rates observed with the four model substrates follow the same trend, independently of the R‐oxy group of the ligand: methyl 2‐acetamidoacrylate>dimethyl itaconate>1‐phenylvinyl acetate>N‐(1‐phenylvinyl)acetamide. A substrate‐to‐catalyst ratio (S/C) of up to 10,000:1 was sufficient for total hydrogenation of a model substrate of intermediate reactivity (dimethyl itaconate), and did not imply any loss in conversion or enantioselectivity.     

Highly Modular P‐O‐P Ligands for Asymmetric Hydrogenation

The preparation of a library of new P‐O‐P ligands (phosphine‐phosphites and phosphine‐phosphinites), easily available in two synthetic steps from enantiopure Sharpless epoxy ethers, is reported. The “lead” catalyst of the series has proven to have outstanding catalytic properties in the rhodium‐catalysed asymmetric hydrogenation of a wide variety of functionalised alkenes (16 examples). The excellent performance and modular design of the catalysts makes them attractive for future applications.     

One‐Step Synthesis of Chiral Azamacrocycles via Palladium‐Catalyzed Enantioselective Amination of 1,5‐Dichloroanthraquinone and 1,5‐Dichloroanthracene

Asymmetric amination of 1,5‐dichloroanthraquinone and 1,5‐dichloroanthracene with di‐ and trioxadiamines catalyzed by palladium complexes with various chiral phosphine ligands gave chiral macrocycles with ee values of up to 60%. The dependence of the chemical yields and enantiomeric excess on the nature of the starting compounds and the phosphine ligands employed was demonstrated. An unexpected spontaneous resolution upon crystallization of the macrocycle comprising anthraquinone and dioxadiamine moieties was observed while in the case of the macrocycle with a trioxadiamine linker racemic monocrystals were obtained. Crystallization of the enantiomerically enriched mixtures afforded chiral macrocycles with 88–99% ee.     

Novel Amido‐Complexes for the Efficient Asymmetric Hydrogenation of Imines

Novel N,N,P ligand stabilized rhodium complexes exhibiting high activities and enantioselectivities in the asymmetric hydrogenation of N‐aryl imines are introduced. The ligands were synthesized from inexpensive starting materials and their modular design allows for the introduction of a broad variety of substitution patterns. Additionally, a rather low catalyst loading could be employed.