2,7‐Bis(diarylamino)‐9,9‐dimethylfluorenes as Hole‐Transport Materials for Organic Light‐Emitting Diodes

2,7‐Bis(p‐methoxyphenyl‐m′‐tolylamino)‐9,9‐dimethylfluorene ( 1′ ), 2,7‐bis(phenyl‐m′‐tolylamino)‐9,9‐dimethylfluorene ( 2′ ) and 2,7‐bis(p‐fluorophenyl‐m′‐tolylamino)‐9,9‐dimethylfluorene ( 3′ ) have been synthesized using the palladium‐catalyzed reaction of the appropriate diarylamines with 2,7‐dibromo‐9,9‐dimethylfluorene. These molecules have glass‐transition temperatures 15–20 °C higher than those for their biphenyl‐bridged analogues, and are 0.11–0.14 V more readily oxidized. Fluorescence spectra and fluorescence quantum yields for dimethylfluorene‐bridged and biphenyl‐bridged species are similar, but the peaks of the absorption spectra of 1′ – 3′ are considerably red‐shifted relative to those of their biphenyl‐bridged analogues. Time‐of‐flight hole mobilities of 1′ – 3′ /polystyrene blends are in a similar range to those of the biphenyl‐bridged analogues. Analysis according to the disorder formalism yields parameters rather similar to those for the biphenyl species, but with somewhat lower zero‐field mobility values. Density functional theory (DFT) calculations suggest that the enforced planarization of the fluorene bridge leads to a slightly larger reorganization energy for the neutral/cation electron‐exchange reaction than in the biphenyl‐bridged system. Organic light‐emitting diodes have been fabricated using 1′ – 3′ /polystyrene blends as the hole‐transport layer and tris(8‐hydroxy quinoline)aluminium as the electron‐transport layer and lumophore. Device performance shows a correlation with the ionization potential of the amine materials paralleling that seen in biphenyl‐based systems, and fluorene species show similar performance to biphenyl species with comparable ionization potential.     

Multifunctional Fluorene‐Based Oligomers with Novel Spiro‐Annulated Triarylamine: Efficient,Stable Deep‐Blue Electroluminescence,Good Hole Injection,and Transporting Materials with Very High Tg

A series of fluorene‐based oligomers with novel spiro‐annulated triarylamine structures, namely DFSTPA, TFSTPA, and TFSDTC, are synthesized by a Suzuki cross‐coupling reaction. The spiro‐configuration molecular structures lead to very high glass transition temperatures (197–253 °C) and weak intermolecular interactions, and consequently the structures retain good morphological stability and high fluorescence quantum efficiencies(0.69–0.98). This molecular design simultaneously solves the spectral stability problems and hole‐injection and transport issues for fluorene‐based blue‐light‐emitting materials. Simple double‐layer electroluminescence (EL) devices with a configuration of ITO/TFSTPA (device A) or TFSDTC (device B)/ TPBI/LiF/Al, where TFSTPA and TFSDTC serve as hole‐transporting blue‐light‐emitting materials, show a deep‐blue emission with a peak around 432 nm, and CIE coordinates of (0.17, 0.12) for TFSTPA and (0.16, 0.07) for TFSDTC, respectively, which are very close to the National Television System Committee (NTSC) standard for blue (0.15, 0.07). The maximum current efficiency/external quantum efficiencies are 1.63 cd A^?1/1.6% for device A and 1.91 cd A^?1/2.7% for device B, respectively. In addition, a device with the structure ITO/DFSTPA/Alq₃/LiF/Al, where DFSTPA acts as both the hole‐injection and ‐transporting material, is shown to achieve a good performance, with a maximum luminance of 14 047 cd m^?2, and a maximum current efficiency of 5.56 cd A^?1. These values are significantly higher than those of devices based on commonly usedN,N′‐di(1‐naphthyl)‐N,N′‐diphenyl‐[1,1′‐biphenyl]‐4,4′‐diamine (NPB) as the hole‐transporting layer (11 738 cd m^?2 and 3.97 cd A^?1) under identical device conditions.     

Anode Interfacial Tuning via Electron‐Blocking/Hole‐Transport Layers and Indium Tin Oxide Surface Treatment in Bulk‐Heterojunction Organic Photovoltaic Cells

The effects of anode/active layer interface modification in bulk‐heterojunction organic photovoltaic (OPV) cells is investigated using poly(3,4‐ethylenedioxythiophene):poly(styrene sulfonate) (PEDOT:PSS) and/or a hole‐transporting/electron‐blocking blend of 4,4′‐bis[(p‐trichlorosilylpropylphenyl)‐phenylamino]biphenyl (TPDSi₂) and poly[9,9‐dioctylfluorene‐co‐N‐[4‐(3‐methylpropyl)]‐diphenylamine] (TFB) as interfacial layers (IFLs). Current–voltage data in the dark and AM1.5G light show that the TPDSi₂:TFB IFL yields MDMO‐PPV:PCBM OPVs with substantially increased open‐circuit voltage (V_oc), power conversion efficiency, and thermal stability versus devices having no IFL or PEDOT:PSS. Using PEDOT:PSS and TPDSi₂:TFB together in the same cell greatly reduces dark current and produces the highest V_oc (0.91 V) by combining the electron‐blocking effects of both layers. ITO anode pre‐treatment was investigated by X‐ray photoelectron spectroscopy to understand why oxygen plasma, UV ozone, and solvent cleaning markedly affect cell response in combination with each IFL. O₂ plasma and UV ozone treatment most effectively clean the ITO surface and are found most effective in preparing the surface for PEDOT:PSS deposition; UV ozone produces optimum solar cells with the TPDSi₂:TFB IFL. Solvent cleaning leaves significant residual carbon contamination on the ITO and is best followed by O₂ plasma or UV ozone treatment.     

Hole Transport Materials Based on 6,12‐Dihydroindeno[1,2‐b]fluorine with Different Periphery Groups: A New Strategy for Dopant‐Free Perovskite Solar Cells

Although several hole‐transporting materials (HTMs) have been designed to obtain perovskite solar cells (PSCs) devices with high performance, the dopant‐free HTMs for efficient and stable PSCs remain rare. Herein, a rigid planar 6,12‐dihydroindeno[1,2‐b]fluorine (IDF) core with different numbers of bulky periphery groups to construct dopant‐free HTMs of IDF‐SFXPh, IDF‐DiDPA, and IDF‐TeDPA is modified. Thanks to the contributions of the planar IDF core and the twisted SFX periphery groups, the dopant‐free IDF‐SFXPh‐based PSCs device achieves a device performance of 17.6%, comparable to the doped 2,2′,7,7′‐tetrakis(N,N‐di‐p‐methoxyphenylamine)‐9,9′‐spirobifluorene (spiro‐OMeTAD)‐based device (17.6%), with much enhanced device stability under glovebox and ambient conditions.     

Insight into the Role of Oxidation in the Thermally Induced Green Band in Fluorene‐Based Systems

The causes of the spectral instability of poly[9,9‐dioctylfluoren‐2,7‐diyl‐co‐2′,7′‐spiro(cyclohexane‐1,9′‐fluorene)] during thermal annealing in air, which leads to a green photoluminescence (PL) emission band, are investigated. The I_green/I_blue ratio evolution (I = intensity) is found to be independent of the amount of monoalkylfluorene defects, despite the fact that their presence might be regarded as a trigger for the radical process leading to polymer degradation in the presence of a trace amount of metal catalyst. Furthermore, the absence of a correlation between the degree of oxidation of the material and the I_green/I_blue ratio indicates that the spatial disposition of fluorenones formed during the thermal degradation of the material, rather than their amount, is to be strictly related to the I_green/I_blue ratio. The evidenced formation of fluorenone agglomerates, which could be considered the cause for the consistent increase in the I_green/I_blue ratio during a thermal oxidation of a polyfluorene, confirms that the radical mechanism can also involve dialkylfluorene systems. Finally, the higher resistance to thermal degradation shown by spirocyclohexane fluorene units with respect to dioctylfluorene ones allows the synthesis of new, spectrally stable, fluorene‐based copolymers.     

Origin of Enhanced Hole Injection in Inverted Organic Devices with Electron Accepting Interlayer

Conventional organic light emitting devices have a bottom buffer interlayer placed underneath the hole transporting layer (HTL) to improve hole injection from the indium tin oxide (ITO) electrode. In this work, a substantial enhancement in hole injection efficiency is demonstrated when an electron accepting interlayer is evaporated on top of the HTL in an inverted device along with a top hole injection anode compared with the conventional device with a bottom hole injection anode. Current–voltage and space‐charge‐limited dark injection (DI‐SCLC) measurements were used to characterize the conventional and inverted N,N′‐diphenyl‐N,N′‐bis(1‐naphthyl)(1,1′biphenyl)‐4,4′diamine (NPB) hole‐only devices with either molybdenum trioxide (MoO₃) or 1,4,5,8,9,11‐hexaazatriphenylene hexacarbonitrile (HAT‐CN) as the interlayer. Both normal and inverted devices with HAT‐CN showed significantly higher injection efficiencies compared to similar devices with MoO₃, with the inverted device with HAT‐CN as the interlayer showing a hole injection efficiency close to 100%. The results from doping NPB with MoO₃ or HAT‐CN confirmed that the injection efficiency enhancements in the inverted devices were due to the enhanced charge transfer at the electron acceptor/NPB interface.     

Boosting the performance and stability of perovskite solar cells with phthalocyanine-based dopant-free hole transporting materials through core metal and peripheral groups engineering

Three novel dopant-free hole-transporting materials (HTMs) based on phthalocyanine core containing (4-methyl formate) phenoxy or (4-butyl formate) phenoxy as the peripheral groups with cupper or zinc as the core metals (CuPcNO₂-OMFPh, CuPcNO₂-OBFPh, ZnPcNO₂-OBFPh) were designed and synthesized. All of the phthalocyanine complexes show excellent thermal stabilities, appropriate energy levels and suitable hole mobilities. The potential of three HTMs were tested in perovskite solar cells (PSCs) and ZnPcNO₂-OBFPh based PSC obtained power conversion efficiency (PCE) of 15.74% under 100 mA cm⁻² standard AM 1.5G solar illumination. Most important of all, PSC based on ZnPcNO₂-OBFPh shows better stability than that of the other two phthalocyanines and Spiro-OMeTAD under continuous light irradiation at 60 °C and maximum power point tracking in ambient air without encapsulation after 500 h. The results show that the introduction of appropriate peripheral groups and core metals can improve the performance and stability of PSCs dramatically, which provides an alternative way to develop HTMs for efficient and stable PSCs.     

Hole‐Transporting Materials Incorporating Carbazole into Spiro‐Core for Highly Efficient Perovskite Solar Cells

Hole‐transporting materials (HTMs) play a significant role in hole transport and extraction for perovskite solar cells (PeSCs). As an important type of HTMs, the spiro‐architecture‐based material is widely used as small organic HTM in PeSCs with good photovoltaic performances. The skeletal modification of spiro‐based HTMs is a critical way of modifying energy level and hole mobility. Thus, many spiro alternatives are developed to optimize the spiro‐type HTMs. Herein, a novel carbazole‐based single‐spiro‐HTM named SCZF‐5 is designed and prepared for efficient PeSCs. In addition, another single‐spiro HTM SAF‐5 with reported 10‐phenyl‐10H‐spiro[acridine‐9,9′‐fluorene] (SAF) core is also synthesized for comparison. Through varying from SAF core to SCZF core as well as comparing with the classic 9,9′‐spiro‐bifluorene, it is found that the new HTM SCZF‐5 exhibits more impressive power conversion efficiency (PCE) of 20.10% than SAF‐5 (13.93%) and the commercial HTM spiro‐OMeTAD (19.11%). On the other hand, the SCZF‐5‐based device also has better durability in lifetime testing, indicating the newly designed SCZF by integrating carbazole into the spiro concept has good potential for developing effective HTMs.     

Dopant‐Free Spiro‐Triphenylamine/Fluorene as Hole‐Transporting Material for Perovskite Solar Cells with Enhanced Efficiency and Stability

Chemical doping is often used to enhance electric conductivity of the conjugated molecule as hole‐transporting material (HTM) for the application in optoelectronics. However, chemical dopants can promote ion migration at the electrical field, which deteriorates the device efficiency as well as increases the fabrication cost. Here, two star HTMs, namely 2,2′,7,7′‐tetrakis(N,N‐di‐p‐methoxyphenyl‐amine) 9,9′‐spirobifluorene (Spiro‐OMeTAD) and poly(triarylamine) are subjeted to chemical combination to yield dopant‐free N2,N2,N2′,N2′,N7,N7,N7′,N7′‐octakis(4‐methoxyphenyl)‐10‐phenyl‐10H‐spiro[acridine‐9,9′‐fluorene]‐2,2′,7,7′‐tetraamine (SAF‐OMe). The power conversion efficiencies (PCEs) of 12.39% achieved by solar cells based on pristine, dopant‐free SAF‐OMe are among the highest reported for perovskite solar cells and are even comparable to devices based on chemically doped Spiro‐OMeTAD (14.84%). Moreover, using a HTM comprised of SAF‐OMe with an additional dopant results in a record PCE of 16.73%. Compared to Spiro‐OMeTAD‐based devices, SAF‐OMe significantly improves stability.     

All‐Carbon‐Electrode‐Based Endurable Flexible Perovskite Solar Cells

Endured, low‐cost, and high‐performance flexible perovskite solar cells (PSCs) featuring lightweight and mechanical flexibility have attracted tremendous attention for portable power source applications. However, flexible PSCs typically use expensive and fragile indium–tin oxide as transparent anode and high‐vacuum processed noble metal as cathode, resulting in dramatic performance degradation after continuous bending or thermal stress. Here, all‐carbon‐electrode‐based flexible PSCs are fabricated employing graphene as transparent anode and carbon nanotubes as cathode. All‐carbon‐electrode‐based flexible devices with and without spiro‐OMeTAD (2,2′,7,7′‐tetrakis‐(N,N‐di‐p‐methoxyphenylamine)‐9,9′‐spirobifluorene) hole conductor achieve power conversion efficiencies (PCEs) of 11.9% and 8.4%, respectively. The flexible carbon‐electrode‐based solar cells demonstrate superior robustness against mechanical deformation in comparison with their counterparts fabricated on flexible indium–tin oxide substrates. Moreover, all carbon‐electrode‐based flexible PSCs also show significantly enhanced stability compared to the flexible devices with gold and silver cathodes under continuous light soaking or 60 °C thermal stress in air, retaining over 90% of their original PCEs after 1000 h. The promising durability and stability highlight that flexible PSCs are fully compatible with carbon materials and pave the way toward the realization of rollable and low‐cost flexible perovskite photovoltaic devices.     

High Tg Cyclic Olefin Copolymer Gate Dielectrics for N,N′‐Ditridecyl Perylene Diimide Based Field‐Effect Transistors: Improving Performance and Stability with Thermal Treatment

A novel application of ethylene‐norbornene cyclic olefin copolymers (COC) as gate dielectric layers in organic field‐effect transistors (OFETs) that require thermal annealing as a strategy for improving the OFET performance and stability is reported. The thermally‐treated N,N′‐ditridecyl perylene diimide (PTCDI‐C13)‐based n‐type FETs using a COC/SiO₂ gate dielectric show remarkably enhanced atmospheric performance and stability. The COC gate dielectric layer displays a hydrophobic surface (water contact angle = 95° ± 1°) and high thermal stability (glass transition temperature = 181 °C) without producing crosslinking. After thermal annealing, the crystallinity improves and the grain size of PTCDI‐C13 domains grown on the COC/SiO₂ gate dielectric increases significantly. The resulting n‐type FETs exhibit high atmospheric field‐effect mobilities, up to 0.90 cm² V^?1 s^?1 in the 20 V saturation regime and long‐term stability with respect to H₂O/O₂ degradation, hysteresis, or sweep‐stress over 110 days. By integrating the n‐type FETs with p‐type pentacene‐based FETs in a single device, high performance organic complementary inverters that exhibit high gain (exceeding 45 in ambient air) are realized.     

Organic Electronics: High Tg Cyclic Olefin Copolymer Gate Dielectrics for N,N′‐Ditridecyl Perylene Diimide Based Field‐Effect Transistors: Improving Performance and Stability with Thermal Treatment (Adv. Funct. Mater. 16/2010)

A novel application of ethylene‐norbornene cyclic olefin copolymers (COC) as gate dielectric layers in organic field‐effect transistors (OFETs) that require thermal annealing as a strategy for improving the OFET performance and stability is reported. The thermally‐treated N,N′‐ditridecyl perylene diimide (PTCDI‐C13)‐based n‐type FETs using a COC/SiO₂ gate dielectric show remarkably enhanced atmospheric performance and stability. The COC gate dielectric layer displays a hydrophobic surface (water contact angle = 95° ± 1°) and high thermal stability (glass transition temperature = 181 °C) without producing crosslinking. After thermal annealing, the crystallinity improves and the grain size of PTCDI‐C13 domains grown on the COC/SiO₂ gate dielectric increases significantly. The resulting n‐type FETs exhibit high atmospheric field‐effect mobilities, up to 0.90 cm² V^?1 s^?1 in the 20 V saturation regime and long‐term stability with respect to H₂O/O₂ degradation, hysteresis, or sweep‐stress over 110 days. By integrating the n‐type FETs with p‐type pentacene‐based FETs in a single device, high performance organic complementary inverters that exhibit high gain (exceeding 45 in ambient air) are realized.     

Highly Efficient Non‐Doped Blue Organic Light‐Emitting Diodes Based on Fluorene Derivatives with High Thermal Stability

A new series of blue‐light‐emitting fluorene derivatives have been synthesized and characterized. The fluorene derivatives have high fluorescence yields, good thermal stability, and high glass‐transition temperatures in the range 145–193 °C. Organic light‐emitting diodes (OLEDs) fabricated using the fluorene derivatives as the host emitter show high efficiency (up to 5.3 cd A^–1 and 3.0 lm W^–1) and bright blue‐light emission (Commission Internationale de L'Eclairage (CIE) coordinates of x = 0.16, y = 0.22). The performance of the non‐doped fluorene‐based devices is among the best fluorescent blue‐light‐emitting OLEDs. The good performance of the present blue OLEDs is considered to derive from: 1) appropriate energy levels of the fluorene derivatives for good carrier injection; 2) good carrier‐transporting properties; and 3) high fluorescence efficiency of the fluorene derivatives. These merits are discussed in terms of the molecular structures.     

Pure‐Red Dye for Organic Electroluminescent Devices: Bis‐Condensed DCM Derivatives

In this paper, the bis‐condensed 4‐(dicyanomethylene)‐2‐methyl‐6‐[p‐(dimethylamino)styryl]‐4H‐pyran ( DCM) derivatives are introduced as a new class of red dye for organic light‐emitting devices (OLEDs). They showed more red‐shifted emission than the mono‐substituted DCM derivatives and the emission maxima increased as the electron‐donating ability of the aromatic donor group increased. On the basis of these results, red light‐emitting devices were fabricated with bis‐condensed DCM derivatives as red dopants. For a device of configuration ITO/TPD/Alq₃ + DADB (5.2 wt.‐%)/Alq₃/Al (where ITO is indium tin oxide, TPD is N,N′‐diphenyl‐N,N′‐bis(3‐methylphenyl)‐1,1′‐biphenyl‐4,4′‐diamine, Alq₃ is tris(8‐hydroxyquinoline) aluminum, and DADB is [2,6‐bis[2‐[5‐(dibutylamino)phenyl]vinyl]‐4H‐pyran‐4‐ylidene]propanedinitrile), pure red emission was observed with Commission Internationale de l’Eclairage (CIE 1931) coordinates of (0.658, 0.337) at 25 mA/cm².     

High Molar Extinction Coefficient Ion‐Coordinating Ruthenium Sensitizer for Efficient and Stable Mesoscopic Dye‐Sensitized Solar Cells

Ru(4,4‐dicarboxylic acid‐2,2′‐bipyridine) (4,4′‐bis(2‐(4‐(1,4,7,10‐tetraoxyundecyl)phenyl)ethenyl)‐2,2′‐bipyridine) (NCS)₂, a new high molar extinction coefficient ion‐coordinating ruthenium sensitizer was synthesized and characterized using ¹H NMR, Fourier transform IR (FTIR), and UV/vis spectroscopies and cyclic voltammetry. Using this sensitizer in combination with a nonvolatile organic‐solvent‐based electrolyte, we obtain a photovoltaic efficiency of 8.4 % under standard global AM 1.5 sunlight. These devices exhibit excellent stability when subjected to continuous thermal stress at 80 °C or light soaking at 60 °C for 1000 h. An electrochemical impedance spectroscopy study revealed that device stability is maintained by stabilizing the TiO₂/dye/electrolyte and Pt/electrolyte interface during the aging process. The influence of Li⁺ present in the electrolyte on the device photovoltaic parameters was studied, and the FTIR spectral and photovoltage transient study showed that Li⁺ coordinates to the triethyleneoxide methylether side chains on the K60 sensitizer molecules.     

Highly Branched Phosphorescent Dendrimers for Efficient Solution‐Processed Organic Light‐Emitting Diodes

Intermolecular interactions play a crucial role in the performance of organic light‐emitting diodes (OLEDs). Here we report the photophysical and electroluminescence properties of a fac‐tris(2‐phenylpyridyl)iridium(III ) cored dendrimer in which highly branched biphenyl dendrons are used to control the intermolecular interactions. The presence of fluorene surface groups improves the solubility and enhances the efficiency of photoluminescence, especially in the solid state. The emission peak of the dendrimer is around 530 nm with a PL quantum yield of 76 % in solution and 25 % in a film. The photophysical properties of this dendrimer are compared with a similar dendrimer with the same structure but without the fluorene surface groups. Dendrimer LEDs (DLEDs) are prepared using each dendrimer as a phosphorescent emitter blended in a 4,4′‐bis(N‐carbazolyl)biphenyl host. Device performance is improved significantly by the incorporation of an electron‐transporting layer of 1,3,5‐tris(2‐N‐phenylbenzimidazolyl)benzene. A peak external quantum efficiency of 10 % (38 Cd A^–1) for the dendrimer without surface groups and 13 % (49.8 Cd A^–1) for the dendrimer with fluorene surface groups is achieved in the bilayer LEDs.     

Similar or Totally Different: The Control of Conjugation Degree through Minor Structural Modifications,and Deep‐Blue Aggregation‐Induced Emission Luminogens for Non‐Doped OLEDs

Four 4,4′‐bis(1,2,2‐triphenylvinyl)biphenyl (BTPE) derivatives, 4,4′‐bis(1,2,2‐triphenylvinyl)biphenyl, 2,3′‐bis(1,2,2‐triphenylvinyl)biphenyl, 2,4′‐bis(1,2,2‐triphenylvinyl)biphenyl, 3,3′‐bis(1,2,2‐triphenylvinyl)biphenyl and 3,4′‐bis(1,2,2‐triphenylvinyl)biphenyl (oTPE‐mTPE, oTPE‐pTPE, mTPE‐mTPE, and mTPE‐pTPE, respectively), are successfully synthesized and their thermal, optical, and electronic properties fully investigated. By merging two simple tetraphenylethene (TPE) units together through different linking positions, the π‐conjugation length is effectively controlled to ensure the deep‐blue emission. Because of the minor but intelligent structural modification, all the four fluorophores exhibit deep‐blue emissions from 435 to 459 nm with Commission Internationale de l'Eclairage (CIE) chromaticity coordinates of, respectively, (0.16, 0.14), (0.15, 0.11), (0.16, 0.14), and (0.16, 0.16), when fabricated as emitters in organic light‐emitting diodes (OLEDs). This is completely different from BTPE with sky‐blue emission (0.20, 0.36). Thus, these results may provide a novel and versatile approach for the design of deep‐blue aggregation‐induced emission (AIE) luminogens.     

Synthesis of New Europium Complexes and Their Application in Electroluminescent Devices

Several substituted phenanthrolines (L = pyrazino[2,3‐f][1,10]phenanthroline (PyPhen), 2‐methylpyrazino[2,3‐f][1,10]phenanthroline (MPP), dipyrido[3,2‐a:2′,3′‐c]phenazine (DPPz), 11‐methyldipyrido[3,2‐a:2′,3′‐c]phenazine (MDPz), 11,12‐dimethyldipyrido[3,2‐a:2′,3′‐c]phenazine (DDPz), and benzo[i]dipyrido[3,2‐a:2,3‐c]phenazine (BDPz)) were successfully prepared and europium complexes Eu(TTA)₃L (Eu‐L) based on these ligands were synthesized from EuCl₃, 2‐thenoyltrifluoroacetone (TTA) and L in good yields. Irradiation at the absorption band between 320–390 nm of all these europium complexes, except Eu‐BDPz, in solution or in the solid state leads to the emission of a sharp red band at ～ 612 nm, a characteristic Eu³⁺ emission due to the transition ⁵D₀ → ⁷F₂. No emission from the ligands was found. The result indicates that complete energy transfer from the ligand to the center Eu³⁺ ion occurs for these europium complexes. In contrast, the photoluminescence spectrum of Eu‐BDPz exhibits a strong emission at around 550 nm from the coordinated BDPz ligand and a weak emission at 612 nm from the central europium ion. Incomplete energy transfer from the ligand to the central Eu³⁺ ion was observed for the first time. Several electroluminescent devices ( A – I ) using Eu‐PyPhen, Eu‐MPP, Eu‐DPPz, and Eu‐DDPz as dopant emitters with the device configuration: TPD or NPB (50 nm)/Eu:CBP (1.7–7 %, 30 nm)/BCP (20–30 nm)/Alq (25–35 nm) (where TPD: 4,4′‐bis[N‐(p‐tolyl)‐N‐phenylamino]biphenyl; NPB: 4,4′‐bis[1‐naphthylphenylamino]biphenyl; CBP: 4,4′‐N,N′‐dicarbazole biphenyl; BCP: 2,9‐dimethyl‐4,7‐diphenyl‐1,10‐phenanthroline; Alq: tris[8‐hydroxyquinoline]aluminum) were fabricated. Some of these devices emit saturated red light and are the only europium complex‐based devices that show a brightness of more than 1000 cd m^–2.     

Using Self‐Assembling Dipole Molecules to Improve Charge Collection in Molecular Solar Cells

Surface modification of indium tin oxide (ITO)‐coated substrates through the use of self‐assembled monolayers (SAMs) of molecules with permanent dipole moments has been used to control the anode work function and device performance in molecular solar cells based on a CuPc:C₆₀ (CuPc: copper phthalocyanine) heterojunction. Use of SAMs increases both the short‐circuit current density (J_sc) and fill factor, increasing the power‐conversion efficiency by up to an order of magnitude. This improvement is attributed primarily to an enhanced interfacial charge transfer rate at the anode, due to both a decrease in the interfacial energy step between the anode work function and the highest occupied molecular orbital (HOMO) level of the organic layer, and a better compatibility of the SAM‐modified electrodes with the initial CuPc layers, which leads to a higher density of active sites for charge transfer. An additional factor may be the influence of increasing electric field at the heterojunction on the exciton‐dissociation efficiency. This is supported by calculations of the electric potential distribution for the structures. Work‐function modification has virtually no effect on the open‐circuit voltage (V_oc), in accordance with the idea that V_oc is controlled primarily by the energy levels of the donor and acceptor materials.     

Substituent Effects on Crosslike Packing of 2′,7′‐Diaryl‐ spiro(cyclopropane‐1,9′‐fluorene) Derivatives: Synthesis and Crystallographic,Optical, and Thermal Properties

A series of 2′,7′‐diarylspiro(cyclopropane‐1,9′‐fluorene) derivatives are efficiently synthesized and characterized to determine the reason for the “green‐light” emission of these compounds. These compounds exhibit bright‐violet to blue photoluminescence (PL) (λ^PL_max = 353–419 nm) with excellent PL quantum efficiencies (Φ_PL = 83–100 %) in solution and show high thermal stabilities (T_d = 267–474 °C). The variation of the optical properties of these molecules in the solid state depends on the different stacking modes of these compounds containing different substituents, which are revealed by crystallographic analysis. CH…π hydrogen bonds instead of intermolecular π–π interactions act as the driving force between adjacent fluorenes, even though a very small dialkyl group (cyclopropane) is introduced at the C‐9 position of fluorene. The crosslike molecular stacking efficiently reduces the energy transfer between the herring‐like aggregates and therefore results in the absence of a “green‐light” emission tail. In order to determine the cause of the “green‐light” emission tails, the fluorescence spectra of the films annealed in N₂ or in air are recorded. Broad green‐light emission tails were observed for the films annealed in air, which might be caused by fluorenone defects generated during processing or during the course of the photophysical analysis by reaction with residual oxygen.