气升式内环流反应器流场及传质特性数值模拟

采用双流体模型和气液二相流体动力学理论建立了气升式环流反应器流体流动的数学模型,在此模型的基础上利用溶质渗透理论和各向同性湍流理论建立了局部液相体积传质系数数学模型。采用计算流体软件F luent对气升式环流反应器内气液二相流动状况进行模拟,模拟结果较好地解释了气升式环流反应器内的流动行为及传质特性。模拟计算值与文献实验值的吻合说明了模型的可行性。     

气升式环流反应器的理论研究进展

概述了气升式环流反应器的流体力学模型,对工程实用性较强的气液两流体模型和气泡导致的湍动模型进行了分类,并对常见相间作用力模型和多相流求解技术进行了总结和评价. 指出将Favre平均的两流体模型和采用Sato模型考虑气泡导致湍动的k-e模型相结合是现阶段气升式环流反应器设计和放大的有力工具. 在分析了气液两相流理论现状的基础上,指出了其存在的问题和进一步的研究方向.     

鼓泡床反应器流动特性的CFD研究进展

从计算模型和影响因素2个方面系统综述了鼓泡床反应器内气液两相流CFD的研究进展。介绍了与模型建立相关的多相流模型、湍流模型、相间作用力和气泡尺寸模型的选择和适用情况。总结了表观气速、液相性质、反应器尺寸、分布器和内构件等对反应器流动特性的影响。最后指出了目前存在的不足,并对其发展进行了展望。     

气升式环流反应器数值模拟方法选择及导流筒高度影响

气升式环流反应器(ALR)是一种结构简单,混合传质效率较高的新型多相流反应器。现已广泛应用于化学工程、生物工程和冶金行业中。开发高效的新型气升式环流反应器具有切实的现实意义。本文通过CFD数值模拟的方法,对反应器内部流动状态进行模拟,并与冷模实验得到的数据对比分析。在数值模拟过程中考察了不同湍流模型以及相间作用力对模拟可靠性的影响。在冷模实验的基础上,利用数值模拟的方法分析了不同导流筒高度对反应器流体力学性能的影响。结果表明所建立的二维CFD模型可以定性地反映反应器内部的气含率分布。升力模型的引入可以使反应器内部气体的径向分布与实际情况更为接近,RNG模型对高雷诺数下反应器内气含率的波动有较好的响应。较短的导流筒可以得到较高整体气含率。     

内循环气升式环流反应器生物降解苯酚废水过程的计算传质学模拟研究

利用计算传质学方法对内循环气升式环流反应器（ILALR）内生物降解苯酚废水过程进行了研究。采用欧拉多相流模型结合RNG k-ε湍流模型对ILALR中气-液两相流动过程进行模拟,采用气泡群平衡模型（PBM）对反应器内气泡的尺寸分布进行预测。利用近年来提出的计算传质学\overline{c^{\mathrm{2}}}-ε_c模型对湍流扩散系数进行计算,从而摆脱了传统需要预估湍流Schmidt数的经验方法。模拟得到的液相苯酚和菌体浓度与实验测量值吻合良好,从而证明了所建立模型的有效性。研究结果表明ILALR内湍流传质过程中湍流扩散系数及湍流Schmidt数并非常数,因此基于传递相似性假设得到的湍流Schmidt数经验模型不适用于ILALR内湍流传质过程的模拟。模拟得到的ILALR中液相剪应力随表观气速的增大而增大,局部最大值出现在导流筒的上部。     

固体颗粒对三相气升式环流反应器流动特性的影响

将液相视为连续相,气相和固相视为分散相,同时考虑各相之间的相互作用,结合气液固三相流体的动力学理论,建立气液固三相环流反应器三流体湍流流动的Eulerian模型.采用计算模拟软件Fluent对三相环流反应器的流动状况进行模拟,考察表观气速、固含率、颗粒大小对反应器的气含率以及液体流动速度的影响.模拟结果较好地解释了气升式环流反应器内的三相流体行为,模型与实验结果较好地吻合,表明了模型的可行性.     

催化裂化提升管反应器模型的建立

工业催化裂化提升管反应器内既存在着气固两相的湍流流动,又存在着传热和裂化反应,而且这些过程是相互影响,高度耦合在一起的。本文全面系统地考虑湍流气因两相流动,传质,传热及反应等复杂因素及其相互影响,建立了催化裂化提升管反应器三维气固两相流动反应模型,形成了相应的数值解法,编制了大型的模拟计算程序。由此可对工业催化裂化提升管反应器内湍流气固两相流动进行系统的数值模拟研究。     

新型气升式环流反应器流场数值模拟

利用CFD软件ANSYS 14.0及欧拉-欧拉多相流模型,模拟了一种采用微孔曝气器的新型气升式环流反应器的气液两相流动,得到反应器内气含率和循环液速等参数的详细分布。模拟结果表明：新型气升式环流反应器的平均气含率与气量成正比关系;气量为2.5 m3/h时具有更高的循环液速。     

基于介尺度PBM模型的生物反应器放大模拟及实验研究

对于通气搅拌式工业生物反应器的放大设计而言,精确预测气泡尺寸和体积传质系数非常重要,因此需要建立合适的气泡聚并和破碎模型,以保证反应器的高效操作。以5 L通气搅拌式生物反应器为对象,以气泡尺寸和体积传质系数的实验数据为基准,模拟并考察了两种聚并模型和四种破碎模型对生物反应器内流体流动行为以及传质能力的影响。结果表明,基于介尺度理论的修正聚并模型与考虑黏流剪切的破碎模型组合,所得模拟结果与实验数据吻合最好,这为大型生物反应器的桨型优化提供了模型基础。因为工业化生物发酵通常是在大型生物反应器中进行,搅拌桨型对生物反应器效能至关重要,故本研究在选定最优气泡聚并破碎模型的基础上,通过叶轮末端剪切力相等的放大原则将5 L通气搅拌式工业生物反应器放大到400 m³,同时考察了六斜叶圆盘搅拌桨、非对称式抛物线搅拌桨、布鲁马金式搅拌桨以及六直叶圆盘搅拌桨等桨型组合对气泡破碎能力和气体分散效果的影响,并通过综合对比气含率、体积传质系数等参数,得到400 m³通气搅拌式生物反应器的最优桨型组合。     

CFD在气升式环流反应器结构优化上的应用

利用CFD软件ANSYS 14.0及欧拉-欧拉多相流模型,模拟不同高径比、环隙比下气升式环流反应器的气液两相流动,得到反应器内循环液速和气含率等参数的详细分布。对比模拟结果表明,高径比为7,环隙比1时,反应器具有最优流化状态。CFD在气升式环流反应器的结构优化具有明显的指导意义。     

Insect antifeedant properties of anthranoids from the genusVismia

Vismiones and ferruginins, representatives of a new class of lypophilic anthranoids from the genusVismia were found to inhibit feeding in larvae of species ofSpodoptera, Heliothis, and inLocusta migratoria.     

Direct observation of freeze-thaw instability of latex coatings via high pressure freezing and cryogenic SEM

Despite its industrial importance, the subject of freeze-thaw (F/T) stability of latex coatings has not been studied extensively. There is also a lack of fundamental understanding about the process and the mechanisms through which a coating becomes destabilized. High pressure (2100 bar) freezing fixes the state of water-suspended particles of polymer binder and inorganic pigments without the growth of ice crystals during freezing that produce artifacts in direct imaging scanning electron microscopy (SEM) of fracture surfaces of frozen coatings. We show that by incorporating copolymerizable functional monomers, it is possible to achieve F/T stability in polymer latexes and in low-VOC paints, as judged by the microstructures revealed by the cryogenic SEM technique. Particle coalescence as well as pigment segregation in F/T unstable systems are visualized. In order to achieve F/T stability in paints, latex particles must not flocculate and should provide protection to inorganic pigment and extender particles. Because of the unique capabilities of the cryogenic SEM, we are able to separate the effects of freezing and thawing, and study the influence of the rate of freezing and thawing on F/T stability. Destabilization can be caused by either freezing or thawing. A slow freezing process is more detrimental to F/T stability than a fast freezing process; the latter actually preserves suspension stability during freezing. Presented at the 82nd Annual Meeting of the Federation of Societies for Coatings Technology, October 27–29, 2004 in Chicago, IL. Tied for first place in The John A. Gordon Best Paper Competition.     

Ethanol and (−)-α-Pinene: Attractant Kairomones for Bark and Ambrosia Beetles in the Southeastern US

In 2002–2004, we examined the flight responses of 49 species of native and exotic bark and ambrosia beetles (Coleoptera: Scolytidae and Platypodidae) to traps baited with ethanol and/or (−)-α-pinene in the southeastern US. Eight field trials were conducted in mature pine stands in Alabama, Florida, Georgia, North Carolina, and South Carolina. Funnel traps baited with ethanol lures (release rate, about 0.6 g/day at 25–28°C) were attractive to ten species of ambrosia beetles (Ambrosiodmus tachygraphus, Anisandrus sayi, Dryoxylon onoharaensum, Monarthrum mali, Xyleborinus saxesenii, Xyleborus affinis, Xyleborus ferrugineus, Xylosandrus compactus, Xylosandrus crassiusculus, and Xylosandrus germanus) and two species of bark beetles (Cryptocarenus heveae and Hypothenemus sp.). Traps baited with (−)-α-pinene lures (release rate, 2–6 g/day at 25–28°C) were attractive to five bark beetle species (Dendroctonus terebrans, Hylastes porculus, Hylastes salebrosus, Hylastes tenuis, and Ips grandicollis) and one platypodid ambrosia beetle species (Myoplatypus flavicornis). Ethanol enhanced responses of some species (Xyleborus pubescens, H. porculus, H. salebrosus, H. tenuis, and Pityophthorus cariniceps) to traps baited with (−)-α-pinene in some locations. (−)-α-Pinene interrupted the response of some ambrosia beetle species to traps baited with ethanol, but only the response of D. onoharaensum was interrupted consistently at most locations. Of 23 species of ambrosia beetles captured in our field trials, nine were exotic and accounted for 70–97% of total catches of ambrosia beetles. Our results provide support for the continued use of separate traps baited with ethanol alone and ethanol with (−)-α-pinene to detect and monitor common bark and ambrosia beetles from the southeastern region of the US.     

Methyl 2,4,6-decatrienoates Attract Stink Bugs and Tachinid Parasitoids

Halyomorpha halys (Stål) (Pentatomidae), called the brown marmorated stink bug (BMSB), is a newly invasive species in the eastern USA that is rapidly spreading from the original point of establishment in Allentown, PA. In its native range, the BMSB is reportedly attracted to methyl (E,E,Z)-2,4,6-decatrienoate, the male-produced pheromone of another pentatomid common in eastern Asia, Plautia stali Scott. In North America, Thyanta spp. are the only pentatomids known to produce methyl 2,4,6-decatrienoate [the (E,Z,Z)-isomer] as part of their pheromones. Methyl 2,4,6-decatrienoates were field-tested in Maryland to monitor the spread of the BMSB and to explore the possibility that Thyanta spp. are an alternate host for parasitic tachinid flies that use stink bug pheromones as host-finding kairomones. Here we report the first captures of adult and nymph BMSBs in traps baited with methyl (E,E,Z)-2,4,6-decatrienoate in central Maryland and present data verifying that the tachinid, Euclytia flava (Townsend), exploits methyl (E,Z,Z)-2,4,6-decatrienoate as a kairomone. We also report the unexpected finding that various isomers of methyl 2,4,6-decatrienoate attract Acrosternum hilare (Say), although this bug apparently does not produce methyl decatrienoates. Other stink bugs and tachinids native to North America were also attracted to methyl 2,4,6-decatrienoates. These data indicate there are Heteroptera in North America in addition to Thyanta spp. that probably use methyl 2,4,6-decatrienoates as pheromones. The evidence that some pentatomids exploit the pheromones of other true bugs as kairomones to find food or to congregate as a passive defense against tachinid parasitism is discussed.     

2007～2008年世界塑料工业进展

收集了2007年7月～2008年6月世界塑料工业的相关资料,介绍了2007～2008年国外塑料工业的发展情况,提供了世界塑料产量、消费量及全球各类树脂的需求量及产能情况.按通用热塑性树脂(聚乙烯、聚丙烯、聚苯乙烯、聚氯乙烯、ABS树脂)、工程塑料(尼龙、聚碳酸酯、聚甲醛、热塑性聚酯、聚苯醚)、特种工程塑料(聚苯·硫醚、液晶聚合物、聚醚醚酮)、通用热固性树脂(酚醛、聚氨酯、不饱和聚酯树脂、环氧树脂)不同品种的顺序,对树脂的产量、消费量、供需状况及合成工艺、产品应用开发、树脂品种的延伸及应用的进一步扩展等技术作了详细介绍.     

2005～2006年国外塑料工业进展

收集了2005年7月～2006年6月国外塑料工业的相关资料,介绍了2005—2006年国外塑料工业的发展情况。提供了世界塑料产量、消费量及全球各类树脂生产量以及各国塑料制品的进出口情况。作为对比,介绍了中国塑料的生产情况。按通用热塑性树脂（聚乙烯、聚丙烯、聚苯乙烯、聚氯乙烯、ABS树脂）、工程塑料（聚酰胺、聚碳酸酯、聚甲醛、热塑性聚酯、聚苯醚）、通用热固性树脂（酚醛、聚氨酯、不饱和树脂、环氧树脂）、特种工程塑料（聚苯硫醚、液晶聚合物、聚醚醚酮）的品种顺序,对树脂的产量、消费量、供需状况及合成工艺、产品开发、树脂品种的延伸及应用的扩展作了详细的介绍。