Plasma-reduced Ni/γ–Al2O3 and CeO2–Ni/γ–Al2O3 catalysts for improving dry reforming of propane

Pristine Ni/γ–Al₂O₃ and CeO₂–Ni/γ–Al₂O₃ catalysts were prepared by co-impregnation technique for dry reforming of propane. X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM) and transmission electron microscopy (TEM) were used to examine the structure and morphology of the catalysts before and after the reforming reactions. The excellent interaction between catalyst active phases was observed in both CeO₂–Ni/γ–Al₂O₃ and Ni/γ–Al₂O₃ stabilized with polyethelene glycol (Ni/γ–Al₂O₃–PEG). Towards C₃H₈ and CO₂ conversion, the CeO₂–Ni/γ–Al₂O₃ and Ni/γ–Al₂O₃–PEG showed improved catalytic activity when compared to the pristine Ni/γ–Al₂O₃ catalyst. Interestingly, high H₂ concentration was achieved with the CeO₂–Ni/γ–Al₂O₃ and high CO concentration with the Ni/γ–Al₂O₃–PEG, which is due to the nanoconfinement of nickel particles within the support and favorable metal-support interaction as a result of plasma reduction. The CeO₂–Ni/γ–Al₂O₃ catalyst exhibited better stability for anti-sintering and coke resistance, thus exhibiting high reactivity and durability in the dry reforming.     

Stability improvements of Ni/α-Al2O3 catalysts to obtain hydrogen from methane reforming

Ni catalysts supported on commercial α-Al₂O₃ modified by addition of CeO₂ and/or ZrO₂ were prepared in the present work. Since the principal objective was to evaluate the behavior of these systems and the support effect on the stability, methane reforming reactions were studied with steam, carbon dioxide, partial oxidation and mixed reforming. Results show that catalysts supported on Ce–Zr–α-Al₂O₃ composites present better reforming activity and stability noticeably higher than in the case of the reference support. With respect to composites, the presence of mixed oxides of Ce_xZr_1−xO₂ type facilitates the formation of active phases with higher interaction. This fact reduces the deactivation by sintering conferring to the system a higher contribution of adsorbed oxygen species, favoring the deposited carbon elimination. These improvements resulted in being dependent on the Ce:Zr ratio of the composite, thus obtaining more stable catalysts for Ce:Zr = 4:1 ratios.     

Effects of Y2O3-modification to Ni/γ-Al2O3 catalysts on autothermal reforming of methane with CO2 to syngas

The effects of Y₂O₃-modification to Ni/γ-Al₂O₃ catalysts on autothermal reforming of methane to syngas were investigated. It was found that the introduction of Y₂O₃ (5%, 8%, 10%) lead to significant improvement in catalytic activity and stability, and the H₂/CO ratio could be adjusted via controlling the O₂/CO₂ ratio of the feed gas. According to the characterization results of catalysts before and after reaction, it was found that the Y₂O₃·γ-Al₂O₃ supported Ni catalysts had higher NiO reducibility, smaller Ni particle size, higher Ni dispersion and stronger basicity than those of the Ni/γ-Al₂O₃ catalysts. The analysis of catalysts after reaction showed that the addition of Y₂O₃ inhibited the Ni sintering, changed the type of coke and decreased the amount of coke on the catalysts. All the experimental results indicated that the introduction of Y₂O₃ to Ni/γ-Al₂O₃ resulted in excellent catalytic performances in autothermal reforming of methane, and Y₂O₃ played important roles in preventing metal sintering and coke deposition via controlling NiO reducibility, Ni particle size and dispersion, and basicity of catalysts.     

Characterization and activity test of commercial Ni/Al2O3, Cu/ZnO/Al2O3 and prepared Ni–Cu/Al2O3 catalysts for hydrogen production from methane and methanol fuels

In this study, methane and methanol steam reforming reactions over commercial Ni/Al₂O₃, commercial Cu/ZnO/Al₂O₃ and prepared Ni–Cu/Al₂O₃ catalysts were investigated. Methane and methanol steam reforming reactions catalysts were characterized using various techniques. The results of characterization showed that Cu particles increase the active particle size of Ni (19.3 nm) in Ni–Cu/Al₂O₃ catalyst with respect to the commercial Ni/Al₂O₃ (17.9). On the other hand, Ni improves Cu dispersion in the same catalyst (1.74%) in comparison with commercial Cu/ZnO/Al₂O₃ (0.21%). A comprehensive comparison between these two fuels is established in terms of reaction conditions, fuel conversion, H₂ selectivity, CO₂ and CO selectivity. The prepared catalyst showed low selectivity for CO in both fuels and it was more selective to H₂, with H₂ selectivities of 99% in methane and 89% in methanol reforming reactions. A significant objective is to develop catalysts which can operate at lower temperatures and resist deactivation. Methanol steam reforming is carried out at a much lower temperature than methane steam reforming in prepared and commercial catalyst (275–325 °C). However, methane steam reforming can be carried out at a relatively low temperature on Ni–Cu catalyst (600–650 °C) and at higher temperature in commercial methane reforming catalyst (700–800 °C). Commercial Ni/Al₂O₃ catalyst resulted in high coke formation (28.3% loss in mass) compared to prepared Ni–Cu/Al₂O₃ (8.9%) and commercial Cu/ZnO/Al₂O₃ catalysts (3.5%).     

CO2 reforming of CH4 by combination of cold plasma jet and Ni/γ-Al2O3 catalyst

CO₂ reforming of CH₄ to synthesis gas was investigated by cold plasma jet (CPJ) only and combination of cold plasma jet with Ni/γ-Al₂O₃ catalyst at atmospheric pressure. The higher selectivity of H₂ and CO, and higher energy efficiency was obtained by this novel process. The optimum experimental conditions are: CH₄ = 3.33 Nl/min, CO₂ = 5.00 Nl/min, N₂ = 8.33 Nl/min, and the input power at 770 W. The results showed that, for the plasma only, the conversions of CH₄ and CO₂ were 46% and 34%, the selectivities of CO and H₂ were 85% and 78%, the energy efficiency was 2.9 mmol/kJ, respectively; for the combination of cold plasma jet with Ni/γ-Al₂O₃ catalyst, the conversions of CH₄ and CO₂ were increased by 14% and 6%, the yield of H₂ and CO increased by 18% and 11%, the energy efficiency reached at 3.7 mmol/kJ, respectively. And the catalyst hasn't accessorial heating. The CPJ method has the advantage of simple processing and is easy to be industrialized.     

Hydrogen production from oxidative steam-reforming of n-propanol over Ni/Y2O3–ZrO2 catalysts

Oxidative steam reforming (OSR) of n-propanol was studied over new Ni catalysts (ca. 7% Ni wt/wt) supported on Y₂O₃–ZrO₂ oxides with different yttrium content (2–41 % Y₂O₃ wt/wt). Materials were characterized by X-ray diffraction, temperature-programmed reduction, X-ray photoelectron and Raman spectroscopy, scanning electron microscopy with energy dispersive X-ray analysis and high resolution transmission electron microscopy. Samples were used in calcined form and tested in the temperature range 673–773 K using a reactant feed of n-propanol/water/O₂ at a molar ratio 1/9/0.5. Hydrogen production is related with the support composition and Ni dispersion.     

Syngas production by CO2 reforming of coke oven gas over Ni/La2O3–ZrO2 catalysts

Syngas production by CO₂ reforming of coke oven gas (COG) was studied in a fixed-bed reactor over Ni/La₂O₃–ZrO₂ catalysts. The catalysts were prepared by sol–gel technique and tested by XRF, BET, XRD, H₂-TPR, TEM and TG–DSC. The influence of nickel loadings and calcination temperature of the catalysts on reforming reaction was measured. The characterization results revealed that all of the catalysts present excellent resistance to coking. The catalyst with appropriate nickel content and calcination temperature has better dispersion of active metal and higher conversion. It is found that the Ni/La₂O₃–ZrO₂ catalyst with 10 wt% nickel loading provides the best catalytic activity with the conversions of CH₄ and CO₂ both more than 95% at 800 °C under the atmospheric pressure. The Ni/La₂O₃–ZrO₂ catalysts show excellent catalytic performance and anti-carbon property, which will be of great prospects for catalytic CO₂ reforming of COG in the future.     

Oxidative steam reforming of ethanol over Ni/Al2O3 catalysts promoted by CeO2, ZrO2 and CeO2–ZrO2

Oxidative steam reforming of ethanol at low oxygen to ethanol ratios was investigated over nickel catalysts on Al₂O₃ supports that were either unpromoted or promoted with CeO₂, ZrO₂ and CeO₂–ZrO₂. The promoted catalysts showed greater activity and a higher hydrogen yield than the unpromoted catalyst. The characterization of the Ni-based catalysts promoted with CeO₂ and/or ZrO₂ showed that the variations induced in the Al₂O₃ by the addition of CeO₂ and/or ZrO₂ alter the catalyst's properties by enhancing Ni dispersion and reducing Ni particle size. The promoters, especially CeO₂–ZrO₂, improved catalytic activity by increasing the H₂ yield and the CO₂/CO and the H₂/CO values while decreasing coke formation. This results from the addition of ZrO₂ into CeO₂. This promoter highlights the advantages of oxygen storage capacity and of mobile oxygen vacancies that increase the number of surface oxygen species. The addition of oxygen facilitates the reaction by regenerating the surface oxygenation of the promoters and by oxidizing surface carbon species and carbon-containing products.     

Hydrogen production by biomass gasification in supercritical water over Ni/γAl2O3 and Ni/CeO2-γAl2O3 catalysts

Hydrogen production by supercritical water gasification (SCWG) is a promising technology for wet biomass utilization. Ni catalyst can realize the high gasification efficiency of biomass near the critical temperature of water. In this paper, Ni/γAl₂O₃ and Ni/CeO₂-γAl₂O₃ catalysts were prepared by an impregnation method. The catalyst performance for glucose gasification in supercritical water was tested in autoclave reactor. All experiments were carried out in the autoclave at 673 K, 24.5 MPa, and the concentration of glucose was 9.09 wt.%. The catalysts before and after reaction were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), BET specific surface area measurements, X-ray fluorescence spectrum (XRF) and Thermo-gravimetric analyses (TGA) in order to investigate on the chemical property and catalytic mechanism. The experimental results showed that hydrogen yield and hydrogen selectivity increased sharply with addition of Ni/γAl₂O₃ and Ni/CeO₂-γAl₂O₃ catalysts. The catalytic activity and H₂ selectivity of Ni/CeO₂-γAl₂O₃ was higher than that of Ni/γ-Al₂O₃ catalyst. The results revealed that carbon deposition and coking led to the deactivation of the catalysts. Ce in the Ni/CeO₂-γAl₂O₃ catalyst had a certain role in the inhibition of carbon deposition and coking.     

Steam reforming of ethanol over Co3O4–Fe2O3 mixed oxides

Co₃O₄, Fe₂O₃ and a mixture of the two oxides Co–Fe (molar ratio of Co₃O₄/Fe₂O₃ = 0.67 and atomic ratio of Co/Fe = 1) were prepared by the calcination of cobalt oxalate and/or iron oxalate salts at 500 °C for 2 h in static air using water as a solvent/dispersing agent. The catalysts were studied in the steam reforming of ethanol to investigate the effect of the partial substitution of Co₃O₄ with Fe₂O₃ on the catalytic behaviour. The reforming activity over Fe₂O₃, while initially high, underwent fast deactivation. In comparison, over the Co–Fe catalyst both the H₂ yield and stability were higher than that found over the pure Co₃O₄ or Fe₂O₃ catalysts. DRIFTS-MS studies under the reaction feed highlighted that the Co–Fe catalyst had increased amounts of adsorbed OH/water; similar to Fe₂O₃. Increasing the amount of reactive species (water/OH species) adsorbed on the Co–Fe catalyst surface is proposed to facilitate the steam reforming reaction rather than decomposition reactions reducing by-product formation and providing a higher H₂ yield.     

Combination of CO2 reforming and partial oxidation of methane to produce syngas over Ni/SiO2 and Ni–Al2O3/SiO2 catalysts with different precursors

Ni/SiO₂ and Ni–Al₂O₃/SiO₂ catalysts were prepared by incipient wetness impregnation using citrate and nitrate precursors and tested with a reaction of combination of CO₂ reforming and partial oxidation of methane to produce syngas (H₂/CO). The catalytic activity of Ni/SiO₂ and Ni–Al₂O₃/SiO₂ greatly depended on interaction between NiO and support. NiO strongly interacted with support formed small nickel particles (about 4 nm for NiSC which is abbreviation of Ni/SiO₂ prepared with Nickel citrate precursor) after reduction. The small nickel particles over NiSC catalysts exhibited a good catalytic performance.     

Thermocatalytic decomposition of methane over mesoporous Ni/xMgO·Al2O3 nanocatalysts

This paper describes a facile method to produce mesoporous nanostructure Ni/Al₂O₃, Ni/MgO, and Ni/xMgO.Al₂O₃ (x: MgO/Al₂O₃ molar ratio) catalysts prepared by “one-pot” evaporation-induced self-assembly (EISA) method with some modifications for investigating in the thermocatalytic decomposition of methane. Detailed characterizations of the material were performed with X-ray diffraction (XRD), Brunauer-Emmett-Teller (BET) and N₂ adsorption/desorption, hydrogen temperature-programmed reduction (H₂-TPR), scanning electron microscopy (SEM), high-resolution transmission electron microscopy (HRTEM), and temperature-programmed oxidation (TPO). The characterizations demonstrated that the synthesized catalysts with various MgO/Al₂O₃ molar ratios possessed mesoporous structure with the high BET area in the range of 216.79 to 31.74 m² g^?1. The effect of different surfactants and calcination temperatures on the characterizations and catalytic activity of the catalysts were also examined in details. The experimental results showed that the catalysts exhibited high catalytic potential in this process and the 55 wt.% Ni/2 MgO·Al₂O₃ catalyst calcined at 600^οC possessed an acceptable methane conversion (～60%) under the harsh reaction conditions (GHSV = 48000 (mL h^?1 g_cat^?1)).     

Effects of noble metal-doping on Ni/La2O3–ZrO2 catalysts for dry reforming of coke oven gas

A series of noble metal (Ru, Pd, Ag) doped Ni catalysts supported on La₂O₃–ZrO₂ mixed oxide were prepared using the sol–gel method and evaluated for use in dry reforming of coke oven gas (COG). The catalysts were investigated by means of N₂ adsorption–desorption, XRD, H₂-TPR, TPH, TEM and TG–DSC. TPH analysis revealed that two carbonaceous species formed on the used catalysts and that the low-temperature carbon species was sufficiently active for the reforming reaction. TEM observations indicated that highly dispersed and small metal particles were formed, suppressing coke deposition and improving catalytic performance. The test results indicated that the addition of trace amounts of noble metals effectively promotes catalytic activity. The 0.1Ru–10Ni/8LZ catalyst showed the highest performance among the bimetallic catalysts, because of the strong synergetic effect between Ru and Ni via the formation of a Ru–Ni alloy, which will be promising catalysts in the catalytic dry reforming of COG.     

Novel Ni–ZrO2 catalyst doped with Yb2O3 for ethanol steam reforming

A type of Yb₂O₃ doped Ni–ZrO₂ catalyst for ethanol steam reforming was developed, and displayed excellent catalyzing performance for the selective formation of H₂ and CO₂. Over a Ni_1.25Zr₁Yb_0.8 catalyst, STY(H₂) can maintain stable at the level of 0.396 mol h⁻¹ g⁻¹ (data taken 120 h after the reaction started) under the reaction conditions of 0.5 MPa and 723 K, which was 1.6 times that (0.247 mol h⁻¹ g⁻¹) of the Yb-free counterpart Ni_1.25Zr₁. Characterization of the catalyst revealed that dissolution of an appropriate amount of Yb³⁺ ions in the zirconia host resulted in the formation of the Zr–Yb composite oxide with cubic-ZrO₂ structure, c-(Zr–Yb)O_z, which inhibited effectively the transformation of c-ZrO₂ to thermodynamically more stable m-ZrO₂, thus avoiding sintering of the (Zr–Yb)O_z composite. It was demonstrated that the doping of Yb₂O₃ to Ni–ZrO₂ changed also the valence states or the micro-environments of the Ni-species at the quasi-active surface of the tested catalyst, which was conducive to inhibiting agglomeration of the Ni_x⁰–Niⁿ⁺ species active catalytically, with resulting in maintaining the high metallic nickel dispersion and inhibiting coking. The aforementioned two factors both contributed to improving the activity and operating stability as well as heat-resistant quality of the catalyst.     

Thermophysical properties and devitrification of SrO–La2O3–Al2O3–B2O3–SiO2-based glass sealant for solid oxide fuel/electrolyzer cells

Thermal behaviors and stability of glass/glass–ceramic-based sealant materials are critical issues for high temperature solid oxide fuel/electrolyzer cells. To understand the thermophysical properties and devitrification behavior of SrO–La₂O₃–Al₂O₃–B₂O₃–SiO₂ system, glasses were synthesized by quenching (25 − X)SrO–20La₂O₃–(7 + X)Al₂O₃–40B₂O₃–8SiO₂ oxides, where X was varied from 0.0 mol% to 10.0 mol% at 2.5 mol% interval. Thermal properties were characterized by dilatometry and differential scanning calorimetry (DSC). Microstructural studies were performed by scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS), and X-ray diffraction (XRD). All the compositions have a glass transition temperature greater than 620 °C and a crystallization temperature greater than 826 °C. Also, all the glasses have a coefficient of thermal expansion (CTE) between 9.0 × 10⁻⁶ K⁻¹ and 14.5 × 10⁶ K⁻¹ after the first thermal cycle. La₂O₃ and B₂O₃ contribute to glass devitrification by forming crystalline LaBO₃. Al₂O₃ stabilizes the glasses by suppressing devitrification. Significant improvement in devitrification resistance is observed as X increases from 0.0 mol% to 10.0 mol%.     

Production of hydrogen via steam reforming of biofuels on Ni/CeO2–Al2O3 catalysts promoted by noble metals

The catalytic activity of Ni/CeO₂–Al₂O₃ catalysts modified with noble metals (Pt, Ir, Pd and Ru) was investigated for the steam reform of ethanol and glycerol. The catalysts were characterized by the following techniques: Energy-dispersive X-ray, BET, X-ray diffraction, temperature-programmed reduction, UV–vis diffuse reflectance spectroscopy and X-ray absorption near edge structure (XANES). The results showed that the formation of inactive nickel aluminate was prevented by the presence of CeO₂ dispersed on alumina. The promoting effect of noble metals included a decrease in the reduction temperatures of NiO species interacting with the support, due to the hydrogen spillover effect. It was seen that the addition of noble metal stabilized the Ni sites in the reduced state along the reforming reaction, increasing the ethanol and glycerol conversions and decreasing the coke formation. The higher catalytic performance for the ethanol steam reforming at 600 °C and glycerol steam reforming was obtained for the NiPd and NiPt catalysts, respectively, which presented an effluent gaseous mixture with the highest H₂ yield with reasonably low amounts of CO.     

Hydrogen production by steam reforming of ethanol over mesoporous Ni–Al2O3–ZrO2 aerogel catalyst

A mesoporous Ni–Al₂O₃–ZrO₂ aerogel (Ni–AZ) catalyst was prepared by a single-step epoxide-driven sol–gel method and a subsequent supercritical CO₂ drying method. For comparison, a mesoporous Al₂O₃–ZrO₂ aerogel (AZ) support was prepared by a single-step epoxide-driven sol–gel method, and subsequently, a mesoporous Ni/Al₂O₃–ZrO₂ aerogel (Ni/AZ) catalyst was prepared by an incipient wetness impregnation method. The effect of preparation method on the physicochemical properties and catalytic activities of Ni–AZ and Ni/AZ catalysts was investigated. Although both catalysts retained a mesoporous structure, Ni/AZ catalyst showed lower surface area than Ni–AZ catalyst. From TPR, XRD, and H₂–TPD results, it was revealed that Ni–AZ catalyst retained higher reducibility and higher nickel dispersion than Ni/AZ catalyst. In the hydrogen production by steam reforming of ethanol, both catalysts showed a stable catalytic performance with complete conversion of ethanol. However, Ni–AZ catalyst showed higher hydrogen yield than Ni/AZ catalyst. Superior textural properties, high reducibility, and high nickel surface area of Ni–AZ catalyst were responsible for its enhanced catalytic performance in the steam reforming of ethanol.     

CO2 reforming of methane on Ni/γ-Al2O3 catalyst prepared by dielectric barrier discharge hydrogen plasma

Ni/γ-Al₂O₃ catalyst was prepared by direct treatment of Ni(NO₃)₂/γ-Al₂O₃ precursor with dielectric barrier discharge (DBD) hydrogen plasma at different input powers, characterized by XRD, H₂-TPR, CO₂-TPD, N₂ adsorption and TEM, respectively, and used as the catalyst for CO₂ reforming of methane (CRM). The results showed that the input power obviously affected the reduction degree and catalytic performances of catalysts. Low input power under 40 W mainly resulted in the decomposition of nickel nitrate into Ni oxides. The reduction degree, catalytic activity and stability increase with the input power. Similar catalytic performances in CRM reaction can be obtained when the power exceeds 80 W. Compared with the Ni/Al₂O₃ catalyst prepared by traditional method, Ni/γ-Al₂O₃ samples prepared by H₂ DBD plasma exhibit better activities, stability and anti-carbon deposit performances. It is mainly ascribed to smaller Ni particle size, more basic sites and weaker basicity. The increase of Ni particle sizes due to the sintering at high temperature results in the decrease of catalytic activities and coke formation.     

Methane dry reforming on Ni/Ce0.75Zr0.25O2–MgAl2O4 and Ni/Ce0.75Zr0.25O2–γ-alumina: Effects of support composition and water addition

Nickel catalysts (10wt.%) supported on MgAl₂O₄ and γ-Al₂O₃ were prepared by the wet impregnation method and promoted with various contents of Ce_0.75Zr_0.25O₂. X-ray diffraction (XRD), BET surface area, scanning electron microscopy (SEM), thermal gravimetric analysis (TGA), H₂-temperature programmed reduction (TPR) and CO₂-temperature programmed desorption (TPD) were employed to observe the characteristics of the prepared catalysts. Ni/γ-Al₂O₃ and Ni/Ce_0.75Zr_0.25O₂ (5wt.%)–MgAl₂O₄ showed better activity in CO₂ methane reforming with 75.7(0.93) and 75.4(0.82) CH₄ conversions (and H₂/CO ratio). H₂O was added to feed in the range of H₂O/(CH₄ + CO₂): 0.1–0.5 to suppress reverse water gas shift (RWGS) effect and adjusting H₂/CO ratio. The CH₄ conversions (and H₂/CO) increased to 81(1.1) with 0.5 water/carbon mole ratio in Ni/γ-Al₂O₃ and 85(1.2) with 0.2 water/carbon mole ratio in Ni/Ce_0.75Zr_0.25O₂ (5wt.%)–MgAl₂O₄. The stability of Ni/Ce_0.75Zr_0.25O₂ (5wt.%)–MgAl₂O₄ in the presence and absence of water was investigated. Coke formation and amount in used catalysts were examined by SEM and TGA, respectively. The results showed that the amount of carbon was suppressed and negligible coke formation (less than 3%) was observed in the presence of 0.2 water/carbon mole ratio over Ni/Ce_0.75Zr_0.25O₂ (5wt.%)–MgAl₂O₄ catalyst.