Electrocatalytic hydrogen evolution on metallic and bimetallic Pd–Co alloy nanoparticles

Increasing world energy demands and crises led to alternative energy production methods, such as fuel cells using hydrogen gas which is the half electrochemical reaction of water splitting process. Herein, we synthesize polyvinylpyrrolidone coated Pd, Co and Pd_xCo_1-x (x: 0.5, 0.12, 0.23, 0.49, 0.55, 0.62) metallic and bimetallic nanoparticles (NPs) via polyol process alternative to Pt-based catalysts for hydrogen evolution reaction (HER). Detailed structural analyses of Pd, Co and Pd_xCo_1-x NPs revealed that fcc-Pd, fcc/hcp-Co and fcc-PdCo NPs crystal structures, and the lattice parameters were calculated as 3.5358 Å for Co NPs and 3.9777 Å for Pd NPs. The average size confirmed below 9 nm via TEM imaging and XPS data confirmed the formation of a bimetallic PdCo structure. Although Pd catalyst is mostly responsible for HER process, Pd₆₂Co₃₈ catalysts reduced the onset potential to about 197 mV and provided greater current density. Although E_a values were slightly higher against the Pt/C (20 wt %) benchmark which is reported as 16 kJ mol⁻¹, PdCo NPs provided considerably reduced activation energy (E_a) values compared to Pd/C catalyst of 31 kJ mol⁻¹. The best onset potential was recorded for Pd₆₂Co₃₈ catalysts for HER activity which is 16 mV higher compared to commercially available Pt/C catalyst.     

Tuning of electrocatalytic activity of WO3–TiO2 nanocomposite electrode for alkaline hydrogen evolution reaction

The study reports the synthesis of mesoporous WO₃–TiO₂ nanocomposite with tuned particle size (~7 nm), pore diameter (~4.9 nm), specific surface area (S_BET = 129.112 m²/g) and pore volume (V_tot = 0.185 cm³/g) by an acid catalyzed peptization method, and its utilization for the development of stable catalytic electrode with enhanced activity towards alkaline hydrogen evolution reaction (HER). The SEM and AFM analyses confirm the formation of good quality composite electrodes with improved surface roughness through electroless deposition method. The developed WO₃–TiO₂ nanocomposite electrode exhibits low overpotential value of 120 mV with an exchange current density of 6.20 × 10^?5 mA/cm², and a low Tafel slope value of 98 mV/dec. Apart from the high HER performance, the developed WO₃–TiO₂ nanocomposite electrode exhibits competency with the state-of-the-art electrode materials for alkaline HER in industrial processes with sustained catalytic activity, tolerance behavior and long-term stability.     

Synthesis and electrocatalytic hydrogen evolution performance of Ni–Mo–Cu alloy coating electrode

Ni–Mo–Cu alloy coating electrode was prepared on copper substrate by constant current electrodeposition and characterized by scanning electron microscopy (SEM) and X-ray diffractometry (XRD). The electrochemical characterization for hydrogen evolution reaction (HER) was investigated by cyclic voltammetry (CV) curves, linear sweep voltammetry (LSV) curves and electrochemical impedance spectroscopy (EIS) techniques. Parameters affecting the electrocatalytic activity for the HER are systematically investigated. Results show the Ni–Mo–Cu coating by the introduction of Cu has a rough and cauliflower-like structure and presents a most efficient activity for HER in comparison with binary Ni–Mo electrode. Its remarkably enhanced catalytic activity is attributed to the high surface area as well as synergistic interaction between Ni, Mo and Cu.     

Tuning of electrocatalytic activity of Mn–O–Co composite for alkaline hydrogen evolution reaction

We report the enhancement in electrocatalytic activity of Mn–O–Co composite electrode developed through chemical reduction method. The Mn–O–Co composite electrode exhibits high catalytic activity with a low Tafel slope of 123 mV dec⁻¹ and a low overpotential of 117 mV at a current density of 10 mA cm⁻². The enhancement in electrocatalytic activity of Mn–O–Co composite electrode is due to the synergistic activity of MnO and CoO with the NiP matrix. The intermetallic interaction among the half-filled orbitals of manganese with the fully occupied orbitals of cobalt and nickel leads to an effective electron delocalization in the catalytic system which enhances the HER performance of the coating. The C_dl value of the composite electrode is in the order of 254 μF, which is approximately ten fold higher than the bare NiP coating, due to the enhancement in interaction between the Mn–O–Co composite electrode and the reactive species in the HER medium. The Mn–O–Co composite electrode shows promising characteristics as an electrocatalyst with long term stability and remarkable competency with the commercially available electrodes.     

Heterostructures based on Pd–Au nanoparticles and cobalt phthalocyanine for hydrogen chemiresistive sensors

In this work, the effect of Pd, Au and PdAu nanoparticles on sensor response of cobalt phthalocyanine films to hydrogen was studied. For this purpose, novel heterostructures based on cobalt phthalocyanine and PdAu nanoalloys were obtained by a combination of vacuum thermal evaporation and pulsed metalorganic chemical vapor deposition (MOCVD) and investigated as active layers for hydrogen detection. The structural features and phase composition of the prepared heterostructures were studied by the techniques of X-ray diffraction, transmission electron microscopy and electron diffraction. The concentration of metal nanoparticles in the samples was determined by inductively coupled plasma atomic emission spectroscopy (ICP-AES). The chemiresistive sensor response of CoPc/M (M = Pd, Au, Pd_0.2Au_0.8 and Pd_0.8Au_0.2) to hydrogen (100–400 ppm, room temperature) was compared with that of bare CoPc films. It was shown that the sensor response of the investigated heterostructures to hydrogen (300 ppm) increased in the order CoPc (0.2%) < CoPc/Pd_0.2Au_0.8 (1.9%) ~ CoPc/Au (2.2%) < CoPc/Pd (2.7%) < CoPc/Pd_0.8Au_0.2 (5.6%).     

Effect of carbon content on Ni–Fe–C electrodes for hydrogen evolution reaction in seawater

Hydrogen evolution reaction (HER) on the Ni–Fe–C electrodes electrodeposited at current density ranging from 100 to 300 A/m², as well as their electrochemical properties in 3.5% NaCl solution at 90 °C and pH = 12, had been investigated by polarization measurements, EIS technique. It was shown that the carbon content and grain size of Ni–Fe–C coatings are affected by current density. In addition, the hydrogen evolution overpotential of Ni–Fe–C electrodes was related with carbon content and grain size. The Ni–Fe–C electrodes with optimum catalytic activity for the HER were found to contain the maximum carbon content 1.59% and the minimum grain size 3.4 nm. The results of a comparative analysis between carbon content and intrinsic activity are that carbon content plays an important role in intrinsic activity of Ni–Fe–C electrodes.     

Potentiostatic electrodeposited of Ni–Fe–Sn on Ni foam served as an excellent electrocatalyst for hydrogen evolution reaction

Ni–Fe–Sn electrocatalyst supported on nickel foam (Ni–Fe–Sn/NF) with high efficiency of hydrogen evolution reaction (HER) has been successfully fabricated through one-step potentiostatic electrodeposition route. The optimized Ni–Fe–Sn/NF displayed an extremely low overpotential of, respectively, 144 and 180 mV at 50 and 100 mA cm^?2 for HER in alkaline condition. Moreover, it could retain its superior stability for at least 12 h. The remarkable electrocatalytic activity of our electrocatalyst is ascribed to the high conductivity originated from synergistic effects between Ni, Fe, and Sn during HER process.     

Bimetallic palladium–iridium alloy nanoparticles as highly efficient and stable catalyst for the hydrogen evolution reaction

Addressed herein, a highly efficient, durable and uniformly dispersed activated carbon supported palladium–iridium nanomaterials (3.42 ± 0.34 nm) were reported for the first time as a catalyst in dimethylamine-borane dehydrogenation reaction at the room temperature. The activated carbon supported palladium-iridium nanosheet (Pd–Ir NPs) is obtained by a simple ultrasonic reduction method, and the fabricated nanocatalyst have been defined by Ultra-Violet-Visible (UV–VIS), Raman spectroscopy, X-Ray Diffraction (XRD), X-Ray Photoelectron Spectroscopy (XPS), Transmission Electron Microscopy (TEM) and High-Resolution Transmission Electron Microscopy (HR-TEM). These newly prepared Pd–Ir nanocomposites were found to be highly efficient and stable for dehydrocoupling of dimethylamine borane. The catalytic activity of the Pd–Ir NPs was excellent by showing the one of the best catalytic activity with a very high turnover frequency (295.1 h^?1) and low E_a value of 36.6 ± 2 kJ/mol for DMAB dehydrocoupling. Another important fact about the prepared catalyst is the reusability of the catalyst was very high and easily reused five times without any significant decrease in their catalytic performance. In the current work, the synthesize, characterization and the catalytic performance of the Pd–Ir nanoparticles for the dehydrogenation of the DMAB reaction will be discussed in detail.     

Cu–Co–P electrodeposited on carbon paper as an efficient electrocatalyst for hydrogen evolution reaction in anion exchange membrane water electrolyzers

To solve the issues of energy shortage and environmental pollution, it is essential to develop highly effective catalysts for hydrogen evolution reaction (HER) in water electrolysis. Herein, we report a facile and rapid fabrication of a Cu–Co–P catalyst on a carbon paper (CP) substrate using electrodeposition. First, the deposition conditions for Co–P/CP were optimized. The prepared Co–P consisted of numerous spheres and exhibited acceptable catalytic activity towards HER in an alkaline medium with an overpotential of 72 mV at current density of ?10 mA/cm². Further performance enhancement was achieved by the incorporation of Cu to modify the electronic structure of the Co–P catalyst. In a half-cell test, the optimized Cu–Co–P/CP exhibits remarkable performance, achieving ?10 mA/cm² at an overpotential of 59 mV, and the Tafel slope is 38 mV/dec. In a single-cell test, an anion exchange membrane water electrolyzer with a Cu–Co–P/CP cathode and commercial IrO₂/CP anode exhibited high current density of 0.70 A/cm² at 1.9 V_cell.     

Enhanced activity of Pd/α-MnO2 for electrocatalytic oxygen evolution reaction

This work describes the application of α-MnO₂ and Pd/α-MnO₂ as electrocatalysts in the oxygen evolution reaction (OER). Characterization data revealed that the Pd²⁺ precursor has been oxidized during the synthesis, and the resulting Pd⁴⁺ ions have unprecedently replaced the lattice framework Mn³⁺ ions of α-MnO₂. Furthermore, formation of PdO nanoparticles was also observed. Lower OER overpotential at j = 10 mA cm^?2 (636 mV) was obtained for Pd/α-MnO₂ in relation to α-MnO₂ (700 mV), what is in alignment with the lower charge transfer resistance of Pd/α-MnO₂ (4.9 kΩ cm²) compared to α-MnO₂ (10.4 kΩ cm²). Lower Tafel slope (73 mV dec^?1) and higher TOF (2.87 × 10^?4 s^?1) at overpotential of 350 mV was obtained for Pd/α-MnO₂ in relation to α-MnO₂ (Tafel of 77 mV dec^?1 and TOF of 1.94 × 10^?4 s^?1), indicating a faster electron transfer kinetics promoted by Pd. Pd/α-MnO₂ was stable at j = 14 mA cm^?2 for 6 h.     

Synthesis and characterisation of platinum–cobalt–manganese ternary alloy catalysts supported on carbon nanofibers: An alternative catalyst for hydrogen evolution reaction

A systematic method for obtaining a novel electrode structure based on PtCoMn ternary alloy catalyst supported on graphitic carbon nanofibers (CNF) for hydrogen evolution reaction (HER) in acidic media is proposed. Ternary alloy nanoparticles (Co0.6Mn0.4 Pt), with a mean crystallite diameter under 10 nm, were electrodeposited onto a graphitic support material using a two-step pulsed deposition technique. Initially, a surface functionalisation of the carbon nanofibers is performed with the aid of oxygen plasma. Subsequently, a short galvanostatic pulse electrodeposition technique is applied. It has been demonstrated that, if pulsing current is employed, compositionally controlled PtCoMn catalysts can be achieved. Variations of metal concentration ratios in the electrolyte and main deposition parameters, such as current density and pulse shape, led to electrodes with relevant catalytic activity towards HER. The samples were further characterised using several physico-chemical methods to reveal their morphology, structure, chemical and electrochemical properties. X-ray diffraction confirms the PtCoMn alloy formation on the graphitic support and energy dispersive X-ray spectroscopy highlights the presence of the three metallic components from the alloy structure. The preliminary tests regarding the electrocatalytic activity of the developed electrodes display promising results compared to commercial Pt/C catalysts. The PtCoMn/CNF electrode exhibits a decrease in hydrogen evolution overpotential of about 250 mV at 40 mA cm⁻² in acidic solution (0.5 M H₂SO₄) when compared to similar platinum based electrodes (Pt/CNF) and a Tafel slope of around 120 mV dec⁻¹, indicating that HER takes place under the Volmer-Heyrovsky mechanism.     

Direct-current electrodeposition of Ni–S–Fe alloy for hydrogen evolution reaction in alkaline solution

Ni–S–Fe alloy has been successfully fabricated on a copper foil substrate through direct-current electrodeposition as an electrocatalyst for hydrogen evolution reaction (HER) in alkaline solution. The Ni–S–Fe alloy is characterized with X-ray diffraction (XRD), scanning electron microscopy (SEM), and X-ray photoelectron spectroscopy (XPS). The electrocatalytic performance of Ni–S–Fe alloy for HER is studied in 30 wt% KOH solution. The results show that the Ni–S–Fe alloy exhibits much higher catalytic activity for HER relative to Ni–S alloy, as manifested by smaller overpotential of 222 mV at 10 mA cm^?2 and higher exchange current density of 1.60 × 10^?2 mA cm^?2. The Tafel slope of 84.5 mV·dec^?1 implies an underlying Volmer-Heyrovsky mechanism. The outstanding catalytic performance of the Ni–S–Fe alloy may originate from the synergistic effects of Ni and Fe, refined grain, and enlarged surface area of Ni–S–Fe alloy upon Fe doping. In addition, the Ni–S–Fe alloy has better anti-corrosion property than Ni–S alloy as a result of the poorer crystallinity of Ni–S–Fe alloy.     

Preparation of Ni–P–La alloy as a novel electrocatalysts for hydrogen evolution reaction

Ternary Ni–P–La alloy was synthesized by the co-electrodeposition method on the copper substrate. The energy-dispersive X-ray spectroscopy (EDX), scanning electron microscopy (SEM), and X-ray diffraction (XRD) were used for characterization of the synthesized alloy. The electrochemical performance of the novel alloy was investigated based on electrochemical data obtained from steady-state polarization, Tafel curves, linear sweep voltammetry (LSV), and electrochemical impedance spectroscopy (EIS) in alkaline solution and at ambient temperature. The results showed that the microstructural properties play a vital purpose in determining the electrocatalytic activity of the novel alloys. Also, the HER on investigated alloys was performed via the Volmer-Heyrovsky mechanism and Volmer step as RDS in this work. Ni–P–La catalyst was specified by ƞ₂₅₀ = −139.0 mV, b = −93.0 mV dec⁻¹, and j_o = −181.0 μA cm⁻². The results revealed that the Ni–P–La catalysts have a high potential for HER electrocatalysts in 1M NaOH solution.     

3D hierarchical nanostructured Ni–Co alloy electrodes on porous nickel for hydrogen evolution reaction

Nanostructured Ni–Co alloys decorated on 3D porous nickel electrodes for hydrogen evolution reaction (HER) are successfully prepared through a facile and effective electrodeposition method. By adjusting the current density of electrodeposition, Ni–Co alloys with different surface morphologies like nanocones, leaf-like structures and flakes can be obtained. The HER catalytic activity has been greatly reinforced with decorated Ni–Co alloys. Meanwhile, the HER performance of nanocone Ni–Co alloys outperforms that of leaf-like and flaky Ni–Co alloys. The nanocone Ni–Co alloys exhibit outstanding HER activity, only requiring an overpotential of 86.7 mV at 10 mA cm⁻², along with a low Tafel slope of 69.8 mV dec⁻¹ and 3.4 Ω charge transfer resistance. This nanocone electrode remains stable for 10 h of chronopotentiometric measurement. Such enhanced catalytic performance stems from the porosity and the high population of sharp edges, as well as surface oxidation/metallic states and synergistic effects between Ni and Co.     

Electrochemical performance of Pd and Au–Pd core–shell nanoparticles on surface tailored carbon black as catalyst support

The present work studies the influence of the surface chemistry of carbon supports on the electrochemical behaviour of Pd and Au–Pd core–shell (CS) nanoparticles. Vulcan XC-72R was chemically modified by different acid treatments, inducing changes in the volume of the mesopores and surface density of oxygenated species. The CS nanostructures featuring 19 nm Au cores and 10 nm Pd shells were synthesized by colloidal methods and subsequently incorporated to the carbons supports. Pd nanoparticles were prepared by impregnating a Pd precursor into the modified carbons followed by reduction with sodium borohydride. The use of different preparation methods allowed the independent study of the effect of the support on the morphology/distribution of the nanoparticles and on the reactivity of the nanoparticles, through their interaction with organic molecules. The electrocatalysts were characterised by XRD, EDX, Raman spectroscopy and contact angle measurements. CO and formic acid (HCOOH) electro-oxidation were studied using cyclic voltammetry and chronoamperometry. The effect of the carbon support on the electrocatalytic activity was highly dependent on the method of preparation. Pd nanoparticles obtained by impregnation showed higher HCOOH oxidation currents when supported on the highly oxidised Vulcan support. This is due to the generation of smaller particle sizes (2.3 nm) as a result of the high density of oxygenated functional groups. On the other hand, the CS nanostructures are significantly less active in highly oxidised Vulcan as a results of specific chemical interactions which may be related to the formation of oxides. The implication of these findings towards rationalising particle–substrate interactions are briefly discussed.     

Selective and efficient hydrogen separation of Pd–Au–Ag ternary alloy membrane

The widespread demand for clean energy stimulates great interest to hydrogen energy with high energy density and conversion efficiency. Separation technologies by membranes are increasingly applied for hydrogen separation because of its excellent performance and low consumption. In this work, density functional theory simulations is used to study hydrogen separation of Pd–Au–Ag membrane, and the performance of Pd–Au alloy is also compared and discussed. The results indicate that Pd–Au alloy shows superior selectivity to H₂ gas over CO, N₂, CH₄, CO₂ and H₂S gases, which is in line with experimental results. In particular, the separation selectivity of Pd–Au–Ag to H₂ is significantly greater than those for Pd–Au alloy and several currently reported materials. Moreover, the permeability of H₂ in Pd–Au–Ag exceeds the limits for industrial production at deferent temperatures. Our calculations demonstrate that Pd–Au–Ag alloy present excellent performance as a promising membrane for hydrogen separation.     

Boosting activity and stability by coupling Pt–Ni nanoparticles with La-modified flexible carbon nanofibers for hydrogen evolution reaction

Platinum (Pt) is considered as the most efficient catalyst for hydrogen evolution reaction (HER) with a nearly zero overpotential, but it is limited by the high cost and poor stability. Herein, we report an efficient electrocatalyst of Pt–Ni alloy nanoparticles (NPs) supported on the La-modified flexible carbon nanocomposite fibers (PtNi@La-CNFs) for HER. The rare earth metal oxide in the catalyst has a structure-effect relationship with the carbon fibers to form a flexible fiber membrane. Experimental results show that the macroscopic and microscopic properties of carbon nanocomposite fibers can be optimized by doping La₂O₃, and the Pt–Ni NPs can be anchored effectively. The Pt₁Ni₁@La-CNFs electrocatalyst exhibits a small overpotential of 32 mV to achieve current density of 10 mA cm^?2 with a low Tafel slope of 51 mV dec^?1 in alkaline medium, outperforming that of Pt@La-CNFs and the commercial Pt/C catalyst. This study reveals that the multiple coupling effect of rare earth compound, precious metal, and transition metal in composite catalyst can tailor its the electronic configuration, and results in an enhanced HER performance. This work opens up a novel approach to design high active and low cost Pt-based HER catalysts.     

Pd–Co nanoparticles decorated on different carbon based substrates as electrocatalyst for O2 reduction reaction

In this study, a facile process for the synthesis of bimetallic Pd–Co nanotubes on multi-walled carbon nanotubes (MWCNTs) and chemically reduced graphene oxide (rGO) is reported. The synthesized nanocatalysts are characterized by field emission scanning electron microscopy (FE-SEM), X-ray photoelectron spectroscopy (XPS) and energy-dispersive X-ray spectroscopy (EDX). Catalysts are evaluated for the oxygen reduction reaction (ORR) in basic media. The electrocatalytic performance of Pd–Co supported on rGO and MWCNTs toward ORR is compared with bimetallic and single Pd nanoparticles decorated on Vulcan carbon (XC-72R) by cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS) and rotating disk electrode (RDE) in 0.1 M NaOH solution. The specific electrochemical surface areas of Pd–Co supported on rGO is higher than the corresponding carbon-supported Pd nanoparticles (222.09 vs. 41.57 m² g⁻¹, respectively). The RDE results confirm that the final product of the oxygen reduction is water and the proposed main path is direct 4 electron transfer process with smooth transfer kinetic rate on the Pd–Co/rGO in comparison to Pd–Co/C. Furthermore, the lower charge transfer resistance of the particles in ORR process for the Pd–Co/rGO compared to single Pd/C catalyst, indicating it could be excellent candidate for ORR in alkaline media.     

Effect of microstructure on the electrocatalytic activity for hydrogen evolution of amorphous and nanocrystalline Zr–Ni alloys

Rapidly quenched Zr₂Ni amorphous and nanocrystalline ribbons were studied as electrocatalysts for hydrogen evolution in 6 M KOH. Linear polarization, potentiostatic hydrogen charge/discharge and EIS measurements at various potentials were carried out for the Zr alloys with different microstructure with the aim to extract information about the mechanism of hydrogen evolution and absorption and estimate the kinetic parameters of the hydrogen evolution reaction (HER). Though the melt-spun Zr₆₇Ni₃₃ alloys with varying microstructure do not show substantially different catalytic activity for HER, it could be clearly demonstrated that the nanocrystalline material reveals better catalytic performance than the entirely amorphous and nano-/amorphous alloys with the same chemical composition. It was found that all studied Zr–Ni alloys absorb hydrogen under the conditions of the hydrogen evolution experiments, as the amount of the absorbed hydrogen depends to a large degree on the alloys microstructure as well as on the applied potential during the HER experiment. The diffusion coefficient of hydrogen into the amorphous Zr₆₇Ni₃₃ alloy, as well as the thickness of the hydrided layer were found to be noticeably larger than those of the nanocrystalline alloy at the same conditions of hydrogen charging. Therefore the improved electrocatalytic properties of the nanocrystalline alloy could only be explained by its favorable microstructure (e.g. higher density of defects) and weaker hydrogen absorption into the nanostructured material under the conditions of the HER.