Comparison of YAG: Eu phosphors synthesized by supercritical water in batch and continuous reactors

Luminescent yttrium aluminum garnet (YAG, Y₃Al₅O₁₂) nanoparticles doped with Eu (10 at%) were synthesized in batch-type and continuous-type supercritical water (SCW) reactors. In the case of the continuous-type SCW method, the particles of YAG: Eu phosphors were much smaller and demonstrated a uniform spherical-like shape. Inversely, in the case of the batch-type SCW method, a needle-like or elliptical-like shape was formed because a finite amount of time was required to reach SCW conditions from ambient conditions. However, the emission intensity of YAG: Eu phosphors synthesized by using the batch-type SCW method was stronger. Therefore, it is concluded that the continuous-type SCW method is superior to the batch-type SCW method from the viewpoint of the particle size and shape, but the luminescence property of phosphors in the continuous-type SCW method needs to be improved. In addition, a calcination process slightly improved the luminescence intensities of YAG: Eu phosphors generated by using either the batch-type or continuous-type SCW methods.     

Synthesis of nano-sized YAG:Eu phosphor in continuous supercritical water system

Luminescent yttrium aluminum garnet (Y₃Al₅O₁₂) nanoparticles doped with Eu (YAG:Eu³⁺) were continuously synthesized by directly feeding potassium hydroxide solution and metal salt solution to supercritical water (SCW). Effects of Eu concentration, pH, and residence time on photo-luminescence were studied using a continuous tubular reactor. Residence time played a key role in producing single-phase YAG:Eu³⁺ nanoparticles. The residence time of 20 s under SCW conditions (400 °C and 280 bar) was enough to form YAG:Eu³⁺ phosphor without any intermediate phases. At this residence time, the Eu concentration and pH condition under SCW contributed to improving the size, morphology and luminescent property of YAG: Eu³⁺ nanoparticles. The average size of the prepared phosphor nanoparticles at 10 at.% and pH of 9.10 was 74 nm and the morphology was identified as nearly uniform and spherical-like in shape. Without further thermal treatment, the phosphor YAG:Eu³⁺ synthesized in the continuous reactor under SCW conditions showed strong luminescence properties and red emission spectra.     

The study of surfactant application on synthesis of YAG nano-sized powders

Yttrium aluminum garnet (YAG) nano-sized powders were synthesized using the co-precipitation method with ammonium hydrogen carbonate as precipitant, nonionic, anionic and cationic surfactant as dispersant, respectively. The composition of YAG precursor, the phase formation process of YAG and the properties of the powders were investigated by means of IR, XRD and TEM. The results show that the anionic surfactant is beneficial for the dispersion of the resulting YAG powders. Highly crystalline, well-dispersed nano-sized YAG crystallites were obtained by calcining at 1000 °C for 2 h in the presence of the anionic surfactant. The average size of the particle is about 30 nm. Luminescence properties of the Nd-doped YAG powders prepared with surfactant and with no surfactant were also studied.     

Synthesis of Zn2SnO4 anode material by using supercritical water in a batch reactor

Zn₂SnO₄ anode powders were successfully synthesized using supercritical water (SCW) and metal salt solutions with 10 min reaction time. Effect of NaOH concentration, Zn to Sn ratio, and synthesis temperature were studied with a SCW batch reactor. X-ray diffraction (XRD), scanning electron microscopy (SEM), and charge/discharge cycling tests were employed to characterize the physical properties and electrochemical performance of the as-prepared samples. Alkaline solution concentration and synthesis temperature played a key role in the production of single-phase Zn₂SnO₄ powders. At a solution concentration of 0.3 M NaOH and a molar ratio of Zn:Sn = 2:1 at 400 °C and 30 MPa, the average size range of the pure Zn₂SnO₄ powders was 0.5-1.0 μm, and the morphology was nearly uniform and cubic-like in shape. The initial specific discharge capacity of the Zn₂SnO₄ powders prepared at this condition was 1526 mAh/g at a current density of 0.75 mA/cm² in 0.05-3.0 V, and their irreversible capacity loss was 433 mAh/g. The discharge capacities of the Zn₂SnO₄ powders decreased with cycling and remained at 856 mAh/g after 50 cycles, which was 56% of the initial capacity.     

Synthesis of LiNi1/3Co1/3Mn1/3O2 cathode materials by using a supercritical water method in a batch reactor

LiNi_1/3Co_1/3Mn_1/3O₂ and LiCoO₂ cathode materials were synthesized by using a supercritical water (SCW) method with a metal salt solution in a batch reactor. Stoichiometric LiNi_1/3Co_1/3Mn_1/3O₂ was successfully synthesized in a 10-min reaction without calcination, while overlithiated LiCoO₂ (Li_1.15CoO₂) was synthesized using the batch SCW method. The physical properties and electrochemical performances of LiNi_1/3Co_1/3Mn_1/3O₂ were compared to those of Li_1.15CoO₂ by means of X-ray diffraction (XRD), scanning electron microscopy (SEM), and charge/discharge cycling tests. The XRD pattern of LiNi_1/3Co_1/3Mn_1/3O₂ was found to be similar to that of Li_1.15CoO₂, showing clear splitting of the (0 0 6)/(1 0 2) and (1 0 8)/(1 1 0) peak pairs as particular characteristics of the layered structure. In addition, both cathode powders showed good crystallinity and phase purity, even though a short reaction time without calcination was applied to the SCW method. The initial specific discharge capacities of the Li_1.15CoO₂ and LiNi_1/3Co_1/3Mn_1/3O₂ powders at a current density of 0.24 mA/cm² in 2.5-4.5 V were 149 and 180 mAh/g, and their irreversible capacity loss was 20 and 17 mAh/g, respectively. The discharge capacities of the Li_1.15CoO₂ and LiNi_1/3Co_1/3Mn_1/3O₂ powders decreased with cycling and remained at 108 and 154 mAh/g after 30 cycles, which are 79% and 89% of the initial capacities. Compared to the overlithiated LiCoO₂ cathode powders, the LiNi_1/3Co_1/3Mn_1/3O₂ cathode powders synthesized by SCW method had better electrochemical performances.     

Performance of a slurry bubble column reactor for Fischer-Tropsch synthesis: Determination of optimum condition

The CO conversion and selectivity to C₁+ and C₁₁+ wax products over Co/Al₂O₃ as well as Ru/Co/Al₂O₃ Fischer-Tropsch (F-T)catalysts were investigated by varying reaction temperature (210-250 °C), system pressure (1.0-3.0 MPa), GHSV (1000-6000 L/kg/h), superficial gas velocity (1.7-13.6 cm/s) and slurry concentration (9.09-26.67 wt.%) in a slurry bubble column reactor (0.05 m diameter × 1.5 m height) to determine the optimum operating conditions. Squalane or paraffin wax was used as initial liquid media. The overall CO conversion increased with increasing reaction temperature, system pressure and catalyst concentration. However, the local maximum CO conversion was exhibited at GHSV of 1500-2000 L/kg/h and superficial gas velocity of 3.4-5.0 cm/s. The CO conversion in the case of Ru/Co/Al₂O₃ was much higher and stable than that in the case of Co/Al₂O₃. The selectivity to C₁₁+ wax products increased slightly with increasing GHSV; on the other hand, it decreased with increasing reaction temperature, system pressure, and solid concentration in a slurry bubble column reactor. It could be concluded that the optimum operating conditions based on the yield of hydrocarbons and wax products were; U_G = 6.8-10 cm/s, Cs = 15 wt.%, T = 220-230 °C, P = 2.0 MPa in a slurry bubble column reactor for F-T synthesis.     

Influence of ionic mobility on the phase transformation route in Y3Al5O12 (YAG) stoichiometry

Ionic mobilities of Y³⁺ and Al³⁺ are controlled using either amorphous or well-crystallized precursors and enhanced by the addition of molten NaCl flux. Experimental results indicate that phase transformation prefers a relatively slow reaction route via YAM-YAP-YAG because of limited ionic mobility when either Y³⁺ or Al³⁺ is confined to a crystallized structure. The selection of intermediate phases can be either Y-rich (YAM) or Al-rich (YAP), depending on the competition of ionic mobility between Y³⁺ and Al³⁺ during phase transformation. The YAH-YAG route is selected only when the ionic mobility of Y³⁺ or Al³⁺ is high enough to induce a nucleation and growth reaction while a certain degree of stoichiometric inhomogeneity is presented; otherwise YAG is crystallized directly from amorphous precursors without passing through any intermediate phase.     

Creep behaviour of alumina/YAG composites prepared by different sintering routes

Al₂O₃-5 vol.% Y₃Al₅O₁₂ (YAG) composite powders have been prepared by surface doping of α-alumina powders by an yttrium chloride aqueous solution. Two commercial, one submicron-sized, the other ultra-fine, alumina powders were compared as matrix materials. YAG phase was yielded by an in situ reaction promoted by the subsequent thermal treatment of the doped powders. In particular, a flash soaking into a tubular furnace kept at a fixed temperature in the range 1050-1150 °C was employed, for inducing the crystallization of yttrium-aluminates on the alumina particles surface, but avoiding a relevant crystallites growth. After that, aqueous suspensions of the calcined powders were dispersed by ball-milling and cast into porous moulds or simply dried in a oven. Slip cast green bodies were densified by pressure-less sintering, while powdered samples were consolidated by hot pressing or spark plasma sintering. The low- and high-temperature mechanical performances of the sintered materials were investigated and related to monolithic aluminas behaviour as well as to the composites microstructures. It is shown that the hot-pressed and spark plasma sintered composites present a significantly lower creep rate as compared to reference, monolithic alumina samples.     

Luminescent properties of a novel afterglow phosphor Sr3Al2O5Cl2:Eu,Ce

A series of Eu²⁺ and Ce³⁺ doped/co-doped Sr₃Al₂O₅Cl₂ afterglow phosphors that presented various bright colors were successfully synthesized via high temperature solid state reaction. The structure and luminescence properties of the obtained samples were characterized by X-ray powder diffraction (XRD), photoluminescence (PL) spectra and decay curves as well as the thermoluminescence (TL) glow curves. The XRD results showed that all the phase could be indexed to the orthorhombic structure with the space group P2₁2₁2₁. After being exposed to a 254 nm or 365 nm mercury lamp, blue/yellow-orange afterglow emissions with broad bands peaking around 620 nm/435 nm, which were ascribed to the characteristic 4f⁶5d–4f⁷/5d¹–4f¹ transitions of Eu²⁺/Ce³⁺, could be observed in phosphors of Sr₃Al₂O₅Cl₂:Eu²⁺/Sr₃Al₂O₅Cl₂:Ce³⁺, respectively. Because of the overlap spectral range between the Sr₃Al₂O₅Cl₂:Eu²⁺ and Sr₃Al₂O₅Cl₂:Ce³⁺ phosphors, the energy transfer (ET) from Ce³⁺ to Eu²⁺ occurred. The related ET process was discussed in detail. Moreover, the incorporation of Ce³⁺ could significantly prolong the afterglow duration of Sr₃Al₂O₅Cl₂:Eu²⁺ phosphor, which was due to the increase of trap concentration. Consequently, 6 h of the afterglow duration could be observed in Sr₃Al₂O₅Cl₂:1.0%Eu²⁺, 0.5%Ce³⁺ sample, exhibiting much longer than that of Sr₃Al₂O₅Cl₂: 1.0%Eu²⁺ (3 h). From the afterglow decay curves and the fitting results, the optimal concentration of Ce³⁺ for the enhanced afterglow property was experimentally determined to be 0.5%.     

Color-tunable properties of Eu3+- and Dy3+-codoped Y2O3 phosphor particles

Rare-earth phosphors are commonly used in display panels, security printing, and fluorescent lamps, and have potential applications in lasers and bioimaging. In the present study, Eu³⁺- and Dy³⁺-codoped uniform-shaped Y₂O₃ submicron particles were prepared using the urea homogeneous precipitation method. The structure and morphology of the resulting particles were characterized by X-ray diffraction, field emission scanning electron microscope, and field emission transmission electron microscope, whereas their optical properties were monitored by photoluminescence spectroscopy. The room-temperature luminescence color emission of the synthesized particles can be tuned from red to yellow by switching the excitation wavelength from 254 to 350 nm. The luminescence intensities of red and yellow emissions could be altered by varying the dopant concentration. Strong quenching was observed at high Eu³⁺ and Dy³⁺ concentrations in the Y₂O₃ host lattice.     

Continuous hydrothermal synthesis of HT-LiCoO2 in supercritical water

A detailed investigation was made into the production of high temperature lithium cobalt oxide (HT-LiCoO₂) particles by continuous hydrothermal synthesis via the reaction of cobalt nitrate, lithium hydroxide, and hydrogen peroxide. The experiments were carried out in both subcritical and supercritical water, at temperatures ranging from 300 to 411 °C, with residence times less than 1 min in all instances. Although Co₃O₄ particles were synthesized in subcritical water at similar reaction conditions designed for comparison, well-ordered particles of HT-LiCoO₂ were obtained in supercritical water. In supercritical conditions, the variations in temperature and residence time did not have significant impacts on the average particle size, particle size distribution, or morphology of obtained HT-LiCoO₂. However, it was important to supply excessive lithium hydroxide and hydrogen peroxide in order to synthesize single-phased HT-LiCoO₂ particles without undesired by-products. The hydrothermal synthetic route for LiCoO₂, CoO, and Co₃O₄ in both subcritical and supercritical conditions was postulated.     

Synthesis and photoluminescence properties of MgAl(PO4)O:Eu red phosphor for white LEDs

Eu³⁺-activated MgAl(PO₄)O:phosphor has been synthesized by a high temperature solid state reaction and efficient red emission under near-ultraviolet excitation is observed. The emission spectrum shows a dominant peak at 594 nm due to the ⁵D₀→⁷F₁ transition of Eu³⁺. The excitation spectrum is coupled well with the emission of UV LED (350–410 nm). The effect of Eu³⁺ concentration on the luminescent properties of MgAl(PO₄)O:Eu³⁺ and the mechanism of concentration quenching of Eu³⁺ are studied. The results show that MgAl(PO₄)O:Eu³⁺ is a promising red-emitting phosphor for white LEDs.     

Particle formation and agglomeration of an alumina-zirconia powder synthesized an supercritical CO2 method

Alumina - 20 vol% zirconia doped with 2 mol% yttria composites were prepared by a supercritical CO₂ method. The powder characteristics were examined through control of the supercritical conditions; temperature and pressure. The agglomeration degrees (N) for powders were changed from 1.2 and 5.4. As the value N become smaller or close to unity, powder agglomerates tend to approach their primary powder size. The sintered sample had hardness of 12.5 GPa. SEM and TEM characterization were used to characterize the microstructure and morphology of the prepared powders.     

Synthesis of yttrium aluminum garnet (YAG) powder by homogeneous precipitation combined with supercritical carbon dioxide or ethanol fluid drying

YAG precursors were synthesized by the urea method in aqueous solution using supercritical carbon dioxide and ethanol fluid drying technique, respectively. The composition of the precursors, the phase formation process and the properties of the calcined powders were investigated by means of XRD, IR, TG/DSC, BET, TEM and SEM. Compared with the classically prepared powders at room temperature in air, the amorphous precursor dried by supercritical CO₂ fluid was loosely agglomerated and directly converted to pure YAG at about 900 °C. The resultant YAG powders showed good dispersity with an average crystallite size about 20 nm and specific surface area of 52 m² g⁻¹. However, the precursor dried by supercritical ethanol fluid was crystalline. Extensive phase segregation occurred during the drying process and resulted in the formation of separate phases such as monoclinic Y(OH)₃ and pseudoboehmite. YAM and YAP phases appeared in the calcination process and phase pure were not detected until 1200 °C.     

TPR,XRD and XPS characterisation of ceria-based materials synthesized by freeze-drying precursor method

A freeze-drying precursor method was used to obtain submicrometric powders of ceria-based materials such as Ce_1−xGd_xO_2−δ (x=0, 0.01, 0.05, 0.10 and 0.20), 80%CeO₂–20%ZrO₂, 80%CeO₂–20%Al₂O₃ and (1−y)Ce_0.99Gd_0.01O_2−δ– (y)Al₂O₃ (y=0.01, 0.02, 0.05, 0.10 and 0.30) at temperatures as low as 400 °C. The phase formation and evolution with the temperature was studied by X-ray diffraction (XRD). Also, temperature programmed reduction (TPR) was performed to investigate the reducibility of the ceramic powders. It was observed that after reduction of the ceria-based materials the fluorite structure of the samples was retained. The TPR profiles showed two peaks which are associated to the surface and bulk ceria reduction processes. Likewise, after the TPR measurements the resulting powders have showed high phase stability and reproducibility. XPS results confirmed the reduction of Ce⁴⁺ to (Ce³⁺+Ce⁴⁺) ratio with alumina doping.     

Sol–gel pyrolysis and photoluminescent characteristics of europium-ion doped yttrium aluminum garnet nanophosphors

Europium-ion doped Y₃Al₅O₁₂ garnet nanophosphors (YAG:Eu³⁺) with wide ranging size tunability (40–150 nm) have been prepared via a sol–gel pyrolysis method employing a fuel system that combined urea and polyvinyl alcohol (PVA). Well dispersed nanoparticles were prepared at 1000 °C. This temperature is lower than that required for synthesizing YAG:Eu³⁺ via the solid-state reaction route. The particle size and morphology of the synthesized powders are found to have critical dependence on the oxidizer (metallic nitrates) to fuel ratio. The importance of using an organic polymeric dispersion matrix to obtain well dispersed YAG:Eu³⁺ nanoparticles has been demonstrated. The photoluminescene properties of the prepared YAG:Eu³⁺ phosphors are profoundly dependent on the preparation conditions. The emission intensity of well dispersed YAG:Eu³⁺ nanoparticles is found to be much stronger than that of the bulk sample. The excitation spectrum of well dispersed nanoparticles shows an extension of the excitation peak in the high-energy region. These unique properties of YAG:Eu³⁺ nanoparticles can be rationalized by considering numerous surface states due to the large surface area to volume ratio of the nanoparticles. In addition, using the hypersensitive ⁵D₀→⁷F₂ transition of Eu³⁺ as a local probe, the role of surface states that modify the optical properties of YAG:Eu³⁺ nanophosphors has also been illustrated.     

Synthesis and optical characterization of novel Sr3Ga2O6:Eu phosphor

Alkaline earth metal gallets have been identified as an important ceramic material. The crystal chemistry of many of these gallets is well explored; however, very rare studies regarding optical properties of rare earth (RE) ions doped in such gallets, particularly in Sr₃Ga₂O₆ host, have been carried out. The present study reports on synthesis and characterization of novel Sr₃Ga₂O₆:Eu³⁺ phosphors. The phosphors have been synthesized using a conventional solid state reaction method. Crystal structure, morphology and luminescence properties (excitation, emission and CIE coordinate) of these phosphors have been studied as a function of sintering temperature and Eu³⁺ concentration. X-ray diffraction study reveals that the phosphor sintered at low temperature (900 °C) contains an impurity phase which is removed at higher sintering temperatures and results into cubic crystalline phase of Sr₃Ga₂O₆. Particle size of the phosphor increases with an increase in sintering temperature which results to a red shift in the peak position of excitation band lying in a broad range from 250 to 370 nm. Optimum emission intensity is attained for 0.12 mol% concentration of Eu³⁺ ions; above this concentration, a quenching in emission intensity is observed.     

Microstructural evolution of a commercial ultrafine alumina powder densified by different methods

The densification and grain growth of bodies made from a commercial ultrafine alumina powder was investigated. The primary powder was initially subjected to dry (uniaxial cold pressing) and wet shaping (slip casting), followed by conventional (CS)-, two step (TSS)-, and microwave (MS) sintering to explore the effect of each series of treatments on the densification and microstructural evolution of the specimens. It was demonstrated that a uniform microstructure with higher density would be obtained using the wet shaping method. In addition, microwave sintering was found to be more effective into the densification of the specimens and in yielding a finer grain structure. It is believed that the high heating rate and effective particle packing are responsible for the improvements in these properties. On this basis, it was also demonstrated that the fracture toughness of the samples increased significantly through the application of microwave sintering.     

Photoluminescence properties of Eu3+-doped stalk-like Al2O3 via a hydrothermal route followed by heat treatment

ABSTRACT

Uniform Al₂O₃:Eu³⁺ samples were successfully fabricated via a hydrothermal method and subsequent thermal decomposition of Eu³⁺-doped precursors. The sample characterisations were carried out by means of X-ray diffraction (XRD), scanning electron microscope (SEM) and photoluminescence spectra. XRD results revealed Eu³⁺-doped samples were a pure γ-Al₂O₃ phase after being calcined at 1173?K. SEM results showed that these Eu³⁺-doped Al₂O₃ samples were stalk-like, with an average length of 1.5?μm. Upon excitation at 394?nm, the orange–red emission bands, having wavelengths longer than 580?nm, were to be from ⁵D₀→⁷F_J (J?=?1, 2) transitions. The asymmetry ratio of (⁵D₀→⁷F₂)/(⁵D₀→⁷F₁) intensity is about 0.54, 2.76, 3.29, 2.86, 3.36, 3.13 for Eu³⁺ concentrations of 0.1, 0.4, 0.7, 1.0, 1.5 and 2.0?mol-%, respectively. The optimal doping concentration of Eu³⁺ ions in Al₂O₃ is 1.5?mol-%. According to Dexter's theory, the critical distance between Eu³⁺ ions for energy transfer was determined to be 14?Å.     

Microwave-assisted solvothermal preparation and photoluminescence properties of Y2O3:Eu phosphors

Europium doped yttrium oxide phosphors were synthesized by a rapid microwave-assisted solvothermal method. The microwave processing time for synthesizing the precursors of Y₂O₃:Eu³⁺ powders was as short as 5 min. After calcination at 600 °C, a well-crystallized pure phase of Y₂O₃:Eu³⁺ was obtained. The morphology of the precipitated powders was spherical and composed of nano-sized grains. As the microwave irradiation time was increased, the average particle size of the spherical powders increased, and the crystallinity of heat-treated powders was also enhanced. The synthesized powders retained the spherical morphology after heating treatments. An intense red emission at 611 nm was assigned to the ⁵D₀-⁷F₂ transition of Eu³⁺.