Novel linear molecular aggregation tethered by hydrogen-Bonded interaction within the crystalline calix[4]arene derivatives

Single crystals of two calix[4]arene derivatives, that is, 5,11,17,23-tetra-tert-butyl- 25,27-bis[2-[N-(3-methoxy-4-methoxy-benzylidene)-amino]ethoxy]-26,28- dihydroxy calix[4]arene (1) and 5,11,17,23-tetra-tert-butyl-25,27-bis[2-[3- pyridine carbonyl-amino]ethoxy]-26,28-dihydroxy calix[4]arene (2), were prepared and their crystal structures have been determined by X-ray crystallographic study. As compared with calix[4]arene derivative 1 possessing CN functional group, compound 2 bearing the NH group could form not only intermolecular hydrogen bonds between the hydrogen atom in NH group and the oxygen atom in CO of an adjacent calix[4]arene molecule, but also intramolecular hydrogen bonds between the N—H⋯OC moieties in solid state, giving a rare linear molecular aggregation.     

Synthesis and evaluation of extraction ability of calix[4]-crown-6 cone conformer and its oligomeric analogue

The synthesis of the cone conformers of 5,11,17,23-tetra-tert-butyl-25,27-bis[(4-nitrobenzyloxy)-26,28-dihydroxy]-calix[4]-arene (2), 5,11,17,23-tetra-tert-butyl-25,27-bis[(4-nitrobenzyloxy)]calix[4]arene-crown-6 (3) and 5,11,17,23-tetra-tert-butyl-25,27-bis[(4-aminobenzyloxy)]calix[4]arene-crown-6 (4) containing polymerizable side arms, along with their oligomeric analogue 5, is reported. Extraction studies with monomers 3 and 4 and the oligomer 5 show no difference in their extraction behavior and selectivity, whereas, ionophore 2 is a poor extractant for alkali metal cations. These observations suggest that, substitution of side arms on the lower rim of calix moiety can enhance the calix[4]-crown-6 cone conformers function to extract alkali metal cations in two phase extraction systems.     

Synthesis and characterization of calix[4]arene‐containing polyimides

Three types of amino‐functionalized calixarenes, i.e. the diaminocalix[4]arenes 5,17‐diaminomethyl‐25,26,27,28‐tetrapropoxycalix[4]arene, 25,27‐diaminoethoxy‐26,28‐dihydroxycalix[4]arene and 5,11,17,23‐tetra‐tert‐butyl‐25,27‐diaminoethoxy‐26,28‐dihydroxycalix[4]arene, were synthesized and incorporated as comonomers into the backbones of aromatic polyimides. As a first step, polyimide precursors (poly(amic acid)s) were prepared by condensation reaction of diamine with dianhydride at the stoichiometric ratio. The diamine component was composed of synthesized diaminocalix[4]arene and commercial 4,4′‐oxydianiline combined in various molar ratios. The dianhydride used was 4,4′‐oxydiphthalic anhydride. The poly(amic acid)s were characterized using intrinsic viscosity measurements and their chemical composition was determined using ¹H NMR spectroscopy. The precursors were then transformed into the polyimides using a thermal treatment. Thermal and dynamic mechanical behaviour, wide‐angle X‐ray diffraction and solubility of the resulting polyimide films in selected solvents were evaluated. The structure–property relationship of the novel types of synthesized polyimides is discussed in terms of the calixarene monomer used and the fraction of it incorporated into the polymer backbone. Copyright © 2010 Society of Chemical Industry     

Synthesis of Calix[4]arene-Based Thiourea Derivatives for Extraction of Toxic Dichromate and Arsenate Ions

In the environment, the presence of toxic oxyanions such as Cr(VI) and As(V), especially in drinking water, creates serious hazards to human health. For efficient and selective detection of these species; novel calix[4]arene-based thiourea derivatives which obtained using p-tert-butylcalix[4]arene as starting material have been prepared from m-aniline or o-aniline or o-aminophenol in moderate yield. The structures of all new synthesized compounds obtained from these reactions were determined by using FTIR, ¹H, and ¹³C NMR spectroscopy. The complexing properties of calix[4]arene-based thiourea derivatives have been studied towards the As(V) and Cr(VI). It was found that calix[4]arene-based thiourea derivative 5,11,17,23-tetra-tert-butyl-25,27-bis(o-amino-phenylthioureido propoxy)-26,28-hydroxycalix[4]arene is an effective extractant for carrying HCr₂O₇^2? anions.     

Synthesis and binding properties of polymeric calix[4]arene nitriles

Two new polymers containing pendant calix[4]arene units with nitrile functionalities at their lower rim have been synthesized via radical initiated reactions involving a vinylic monomer 6 {5,11,17,23-tetra-tert-butyl-25,26,27-tris(cyanomethoxy)-28-(2-acryloyloxy) ethoxycalix[4]arene} and with styrene. A five atom spacer group was incorporated between the bulky calixarene core and the acrylate moiety in order to minimize steric interactions which proved to impede the polymerization. The complexation studies were made by using liquid–liquid extraction procedures. It has been deduced from the observations that both polymers show a good selectivity towards Hg²⁺ like their precursor 5,11,17,23-tetra-tert-butyl-25,26,27-tricyanomethoxy-28-(2-hydroxy)ethoxycalix[4]arene 5, which supports their utility as adsorbents or potential candidate materials for fabricating membranes and sensors, which can separate or detect Hg²⁺ metal ions in a high selectivity.     

Selective Extraction of Fe3+ Cation by Calixarene-Based Cyclic Ligands

Abstract

The selective liquid-liquid extraction of Fe³⁺ cation from the aqueous phase to the organic phase was carried out by using p-tert-butylcalix[4]arene [L₁], ca-lix[4]arene [L₂], p-nitro-calix[4]arene [L₃], calix[4]arene p-sulfonic acid [L₄], p-(diethylamino)methylcalixt4]arene [L₅], tetramethyl-p-tert-butylcalix[4]arene tet-raketone [L₆], 25,27-dimethyl-26,28-dihydroxy-p-tert-butylcalix[4]arene diketone [L₇], calix[4]arene-bearing dioxime group on the lower rim [L₈], and a monooxime [L₉]. The effect of varying pH upon the extraction ability of calixarenes substituted with electron-donating and electron-withdrawing groups at their p-position was examined. Observed results were compared with those found for unsubstituted calix[4]arene.     

Thermal Behaviors of Bisazocalix[4]arene Derivatives

In this article, calix[4]arene (4) was prepared by debutylation and hydrolyses reacting from 25,27-dibenzoyl-26,28-dihydroxy-5,11,17,23-tetra(tert-butyl)calix[4]arene (2). Azocalix[4]arenes (6a-c) were coupled by linking 4-methoxy, 4-ethyl, and 4-nitroaniline to calix[4]arene (4) through a diazo-coupling reaction. Thermal behavior characteristics and decomposition routes of 25,26,27,28-tetrahydroxy-11,23-di(tert-butyl)-5,17-(p-substitue phenyl)azocalix[4]arene (6a-c) were investigated in air atmosphere by means of thermogravimetry (TG), differential thermogravimetry (DTG), and differential thermal analysis (DTA) analyses. It was found that the decomposition of all compounds complete with two exothermic stages which corresponded to removal of substitute groups (methoxy-, ethyl-, nitro-) and second stage rest of structure decomposition.     

Methacrylated calix[4]arene phosphonic acids as functionalized crosslinker for radical polymerization

We describe the synthesis of 5,11,17,23‐tetra‐tert‐butyl‐25,27‐dioxypropylphosphonic acid‐26,28‐dimethacryloyloxy‐calix [4]arene and 5,11,17,23‐tetra‐tert‐butyl‐25‐oxypropylphosphonic acid‐27‐hydroxy‐26,28‐dimethacryloyloxy‐calix[4]arene starting from para‐tert‐butyl‐calix[4]arene. The complete reaction was proved by matrix‐assisted laser desorption ionization time of flight mass spectrometry and nuclear magnetic resonance spectroscopy. The influence of these compounds on the kinetics of the radical polymerization of methyl methacrylate was shown by dilatometry. Furthermore, the adhesive properties of dental adhesives containing these calix[4]arene derivatives were investigated. Copyright © 2012 Society of Chemical Industry     

Design and characterization of pH stimuli-responsive nanofiber drug delivery system: The promising targeted carriers for tumor therapy

New carrier platforms have been designed for an electrospun pyridinium calixarene nanofiber for controlled drug delivery. First, 5,11,17,23-tetra-tert-butyl-25,27-bis(3-aminomethyl-pyridineamido)-26,28-dihydroxycalix[4]arene (3-AMP) scaffold was produced by electrospinning. AMP scaffold was modified by human serum albumin (HSA), folic acid (FA), and glutathione (GSH). Doxorubicin (DOX) was loaded to surfaces of the AMP, AMP-HSA, AMP-HSA-FA, and AMP-HSA-GSH nanofibers by using DOX solution in different buffers with, 2.2, 4.0, 6.0, and 7.4 pH. The release studies DOX from four different nanofibers was also done in a various amount microenviroments by changing pH values. The loading and release amount of DOX was estimated from the calibration curve drawn at 480 and 560 nm of excitation and emission wavelengths by using a fluorescence spectrophotometer. The loading studies were confirmed by Fourier transforms infrared, atomic force microscopy, transmission electron microscopy, scanning electron microscope, and energy-dispersive X-ray (EDX) analysis.     

Highly Selective Determination of Perchlorate by a Calix[4]arene based Polymeric Membrane Electrode

This article describes a versatile application of 25,27-bis-N-(N,N-diethyl-2-aminoethyl)carbonylmethoxy-26,28-dihydroxycalix[4]arene (4) as an ionophore for the preparation of perchlorate ion-selective electrode. The electrode exhibits a Nernstian response over the perchlorate concentration range of 1.0×10^?9 – 1.0×10^?1 M with a slope of 59.24 ± 0.5 mV per decade of the concentration. The limit of detection as determined from the intersection of the extrapolated linear segments of the calibration plot is 3.04×10^?9 M. The electrode shows good selectivity toward perchlorate with respect to many common anions. The response time of the sensor was 5–10 s and it has maximum life time of 2 months in the acidic pH. The electrode was used to determine perchlorate in real water samples. The interaction of the ionophore with perchlorate ions is also demonstrated by UV–vis spectroscopy.     

杯[4]芳烃咪唑盐的微波合成及在氟化反应中的应用

以杯[4]芳烃为起始原料,首先制得中间体杯[4]芳烃双溴代烷基衍生物,然后经微波辐射和阴离子交换,共得9种杯[4]芳烃咪唑盐衍生物,化合物的结构与构象经元素分析、IR、1HNMR、19FNMR、31PNMR表征.研究了它们在对氯硝基苯氟化反应中的催化性能以及对K+的萃取性能.结果表明,这9种化合物在氟化反应中的催化效果良好,对氟硝基苯的收率为80.89％～92.67％;同时化合物对K+具有较好的萃取效果,其中以化合物25,27-二[4-(3-甲基咪唑)乙氧基]-26,28-二羟基-5,11,17,23-四叔丁基杯[4]芳烃六氟磷酸盐的萃取效果最好,萃取率可达75.45％.     

Voltammetric characterization of selective potassium ion transfer across micro-water/1,2-dichloroethane interface facilitated by a novel calix[4]arene derivative

In this study, transfer reactions of alkali and alkaline-earth metal ions across a micro-water/1,2-dichloroethane (1,2-DCE) interface facilitated by a novel calix[4]arene derivative, 5,11,17,23-tetra-tert-butyl-25,27-bis(2′amino-methylpyridine)-26,28-dihydroxy calix[4]arene (APHC4), were investigated by cyclic and differential pulse voltammetry techniques. Well-defined voltammetric behavior was obtained only for K⁺ ion among the used metal ions. The electrochemical data were used to determine the stoichiometry and the appropriate association constant of the occurring complex between K⁺ ion and APHC4. The obtained steady-state voltammograms indicated that the facilitated transfer process occurs with a TIC/TID mechanism according to 1:1 stoichiometry. The logarithm of the association constant () of K(APHC4)⁺ complex in the DCE phase was calculated to be 6.32. Also, the availability of the facilitated transfer for the design of an amperometric screening sensor for K⁺ ion was evaluated in the range of 50–500 μmol dm⁻³.     

EXTRACTIVE PROPERTIES TOWARDS RARE-EARTH METAL IONS OF CALIX[ 4] ARENES SUBSTITUTED AT THE NARROW RIM BY PHOSPHORYL AND AMIDE GROUPS

ABSTRACT

The extractive properties of the cone and partial-cone isomers of 5,11,17,23-tetra-?ert-butyl-25,27-bis( diethylcarbamoylmethoxy)-26,28-bisi( diphenylphospninoylmethoxy) calyx[ 4] arene ( cone-1 and partial-cone -1) in 1,2-dichloroethane towards rare-earth metal ions in nitrate media at 25 ° C were investigated. The analysis of the extraction equilibrium obtained from a mixture of four rare-earths ( La, Eu, Er and Y) revealed that the extracted species have a 1 1 metal/ ligand ratio for both ligands. The intra-group separation efficiercies of the ligandls have been evaluated in a competitive extraction process of 11 rare-earth metal ions ( La, Pr, Nd, Sm, Eu, Gd, Dy, Ho, Er, Yb and Y). Significantly higher extractive properties were found for cone-1 with respect to partial-cone-1, suggesting the crucial role of the phosphoryl groups in the complexation of the rare-earth ions. These findings were     

6,7-甲氧基香豆素冠醚双功能化杯【4】芳烃的合成与表征

以对叔丁基杯[4]芳烃为原料,经碱催化两步合成了26,28-二（6,7-二甲氧基香豆素-4-亚甲基）-5,11,17,23-四叔丁基杯[4]芳烃-25,27-冠-6,产物经IR、^1H NMR表征和元素分析表征,该衍生物为锥形结构并与设计思想一致。     

蒽醌冠醚双功能化杯[4]芳烃的合成与表征

以对叔丁基杯[4]芳烃为原料,经碱催化两步合成了26,28-双（2-亚甲基蒽醌）-5,11,17,23-四叔丁基杯[4]-25,27-冠-6。产物经IR、1HNMR表征和元素分析表征,该衍生物为锥形结构并与设计思想一致。     

Extraction of Pb2+ with p-tert-butylcalix [4]-, [5]-, [6]Arene Carboxylic Acid Ligands and their Monomeric Counterpart: A Thermodynamic Approach

Studies on extraction equilibrium constants at different temperatures and thermodynamic parameters of solvent extraction of Pb²⁺ ion with carboxylic acid derivatives of different ring size calixarenes and structure related monomeric compound have been carried out. The extraction equilibrium constants corresponding to calix[n]arene (n?=?4, 5, 6) derivatives decrease in the order [5]arene > [6]arene > [4]arene. In all cases, the complexation process is primarily enthalpy driven. The favorable enthalpic contribution for extraction of Pb²⁺ is in the order hexamer ≈ monomer > tetramer > pentamer. However, the unfavorable entropic loss follows the order: monomer > hexamer > tetramer > pentamer. Overall stability of the host-guest complex is the function of entropy-enthalpy compensation and the free energy of complexation is minimum for the pentamer, followed by tetramer ≈ hexamer and monomer. Although the carboxylic acid derivative of calix[4]arene is more preorganized than the calix[5]arene derivative, extraction of Pb²⁺ ion with the tetramer passes through greater entropic loss than that with the pentamer and the degree of preorganization of calix[4]arene derivative is far from perfect for the complexation and extraction of Pb²⁺ ion. As compared to tetrameric and hexameric counterparts, the structural features of the carboxylic acid derivative of calix[5]arene prior to complexation contribute much to interact with the Pb²⁺ ion and form a thermodynamically stable complex. Supplementary materials are available for this article. Go to the publisher's online edition of Solvent Extraction and Ion Exchange to view the supplemental file.     

Liquid phase extraction of azo dyes by novel calixarenes bearing phthalonitrile and diiminoisoindoline groups

This paper presents a study on the removal of azo dyes [Methyl Orange (MO) and Trapaeolin 000 (TP)] from aqueous solution using new phthalonitrile and isoindoline substituted calix[n]arene derivatives into the organic phase in order to explore the potential use of these calixarenes as low-cost efficient extractants for removal of these azo dyes from wastewater. The effect of NaCl concentration, contact time, and pH on the extraction of these azo dyes was also investigated for all calixarene derivatives. The stoichiometric ratio between the calixarene derivatives (5 and 6) and selected azo dyes (MO and TP) was estimated through job’s plot.     

Synthesis,characterization, and metal ions adsorption properties of chitosan–calixarenes (I)

Calixarene‐modified chitosans (CTS–CA‐I and CTS–CA‐II) were first synthesized by the reaction of chitosan (CTS‐NH₂) with 1,3‐bis‐chloroethoxyethoxy‐2,4‐dihydroxy‐p‐tert‐butylcalix[4]arene (CA‐I) or its benzoyl derivative (CA‐II). Their structures were characterized by infrared and X‐ray diffraction spectroscopy and scanning electron microscopy (SEM). The adsorption of Ni²⁺, Cd²⁺, Cu²⁺, Pd²⁺, Ag⁺, and Hg²⁺ by CTS–CA‐I and CTS–CA‐II was studied and the thermodynamic parameter of two calixarene‐modified chitosans toward Hg²⁺ was deduced. The adsorption properties of CTS–CA‐I and CTS–CA‐II were greatly varied compared with that CTS‐NH₂, especially with the adsorption capacity toward Ag⁺ and Hg²⁺, because of the presence of the calixarene moiety. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 1139–1144, 2003     

Synthesis and characterization of calix[4]arene-based copolyethers and polyurethanes. Ionophoric properties and extraction abilities towards metal cations of polymeric calix[4]arene urethanes

Copolyethers and polyurethanes containing lower and upper rim calix[4]arene units in the fixed cone conformation were prepared in good yield by polycondensation reactions of distal calix[4]arene diols with bisphenol-A/dibromomethane and 2,4-tolylendiisocyanate (TDI), respectively. In a similar way were prepared calix[4]arene-crown-5 and -crown-6 polyurethanes in the fixed 1,3-alternate conformation by condensation of TDI with lower rim calixcrown-5 and calixcrown-6 diols. However, the poor solubility in common organic solvents of the copolyether derivatives (M_w=11,100-11,600 g/mol) hampered further studies on their ionophoric properties. Aiming to obtain model compounds for the investigation of both extraction abilities and ionophoric properties of the polyurethane materials, several bis-urethanes were also synthesized by reaction of the calix[4]arene diols with p-tolylisocyanate (TI). The extraction ability measurements of monomeric and polymeric calix[4]arene urethanes (M_w=12,300-83,500 g/mol) towards alkali metal cations (Li⁺, Na⁺, K⁺, Rb⁺, Cs⁺) and Ag⁺showed a remarkable efficiency and selectivity of calixcrown-6 polyurethane toward Rb⁺, Cs⁺and Ag⁺.     

The synthesis and characterization of novel metalloporphyrazine containing crown ether linked calix[4]arene moieties

The synthesis and characterization of novel magnesium porphyrazine, peripherally symmetrically derived from 1,3-alternate 26,28-[35,36-dicyano-34,37-dithia-29,32,40,43-tetraoxa-35-en]calix[4]arene-crown-5, were carried out. This compound was prepared starting from cis-1,2-dicyano-1,2-ethylenedithiolate and 1,3-alternate 26,28-bis(5′-chloro-3′-oxapentyloxy)calix[4]arene-crown-5. The new macrocycle was characterized using the techniques of UV–vis, ¹H, ¹³C NMR, IR, MS and elemental analysis.