烧结矿质量的合理控制

描述和分析了2005年杭钢烧结矿的质量状况，总结了2006年改进烧结矿质量所采取的措施，为2007年保证烧结矿质量打下了基础。     

安钢烧结厂提高28m2烧结机烧结矿质量的实践

介绍了安钢近几年来为提高28m^2烧结系统烧结矿质量所采取的各项措施，以及在改善烧结矿质量方面所取得的成绩。     

提高攀钢烧结矿质量的措施

介绍了攀钢为提高入炉烧结矿质量所采取的措施和效果，并就进一步改善烧结矿质量提出了建议。     

铁矿石烧结矿的形貌与质量

1 前言改善作为高炉含铁物料的烧结矿的质量仍然是保证高效率生产生铁的重要步骤。所谓烧结矿质量系指在高炉炉内条件下反应时,对烧结矿(及其结构)所表现出来     

太钢低硅烧结矿的试验研究

对太钢低硅烧结矿实验室及工业试验进行了总结分析,针对低硅烧结矿生产所存在的问题,提出了改善烧结矿质量的措施.     

太钢实施低硅烧结初步探讨

通过对太钢低硅烧结技术的试验探讨，就低硅烧结矿所存在的问题，提出了改善烧结矿质量的措施，为太钢顺利生产和使用低硅烧结矿提供了依据。     

关于烧结矿机械强度的评价

按照全苏国家标准17137—87的要求,以烧结矿落下强度和耐磨指数所表征的烧结矿机械强度作为判断烧结矿质量的依据,西西伯利亚钢铁公司烧结厂根据这些特征对烧结矿所作的考核表明,持续多年以来这些特征与工艺条件没有联系,尽管采取了一系列旨在改善最终产品质量的综合措施(例如提高     

提高烧结矿质量的实践

介绍了合钢烧结厂近两年来为提高烧结矿质量在管理和操作上所采取的措施，以及烧结矿质量指标提高的情况。     

萍钢二铁厂提高烧结矿中MgO含量的实践

分析了萍钢将烧结矿中MgO含量提高至3.0%左右后对烧结矿产量和质量的影响,介绍了所采取的相应措施及效果.     

邯钢提高烧结矿中MgO含量的实践

分析了邯钢将烧结矿中MgO含量提高至2．2％以上后对烧结矿产质量的影响，介绍了所采取的相应措施及效果。     

Within-child associations between family income and externalizing and internalizing problems.

Within-child associations between family income and child externalizing and internalizing problems were examined using longitudinal data from the NICHD Study of Early Child Care and Youth Development (2004a, 2004b; N = 1,132). Variations in income effects were estimated as a function of whether families were poor, whether mothers were partnered, and the number of hours mothers and their partners were employed. On average, children had fewer externalizing problems during times when their families' incomes were relatively high than during times when their families' incomes were relatively low; the estimated benefits of increased income were greatest for children who were chronically poor. For both externalizing and internalizing problems, income was most strongly associated with problems when chronically poor children's mothers were partnered and employed. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

FeCuNbSiB粘结磁体的制备及磁性能研究

通过2种途径将熔体快淬法制得的FeCuNbSiB非晶薄带制成环状粘结磁体。一是将非晶薄带进行晶化处理,再将晶化后的薄带粉碎成不同粒度的粉末,然后与粘结剂相混合制成粘结磁体。二是将非晶薄带直接粉碎成不同粒度的粉末,再将此粉末进行晶化处理,将晶化后的磁粉与粘结剂相混合制成粘结磁体。分析了磁粉粒度和模压压力对粘结磁体性能的影响。并对两种粘结磁体的性能进行比较。结果表明,第一种方法制备的粘结磁体的性能优于第二种。     

铸坯内部缺陷对钢板分层形成的影响

探测和解剖分析了断面有中心裂纹缺陷的铸坯;用扫描电镜等分析了依照探伤图谱所选轧后钢板分层缺陷明显部位的金相组织、缺陷形态和微区成分;指出了其沿轧向分布的铁素体带及其内部的条状或片状硫化物是中厚板分层的主要成因;给出了铸坯内部轧制时焊合及修复的边界条件。     

D200—Ⅱ型离心风机振动故障诊断和处理

简介了D200—II型离心风机振动故障情况,分析了故障原因,阐述了采取的处理措施,说明了处理后的运行效果,总结了经验教训。     

Reliability of Settlement Prediction—Case History

A geotextile-reinforced embankment was built over soft ground. Staged construction and vertical prefabricated drains were used to obtain strength gain via consolidation of the foundation material. Settlement and pore pressure were measured as a part of construction control. Settlement, differential settlement, and rate of consolidation were predicted by simple models. Uncertainties in the predictions were evaluated to assess the reliability of the predictions. The estimated errors were compared with the measured values, and major contributors to prediction errors were identified.     

抑制剂对超细WC-Co硬质合金性能的影响

采用高能球磨、真空烧结工艺制备超细WC-Co硬质合金。研究了抑制剂的预磨时间对WC-10Co硬质合金粒度及烧结试样性能的影响。对比了相同抑制剂配比对Co含量不同的硬质合金性能的影响以及稀土对硬质合金性能的影响。结果表明:通过对晶粒长大抑制剂的预磨,其粒度明显细化。加入预磨时间为120 h的抑制剂,WC-10Co硬质合金的平均粒度为0.3μm,硬度达到92.1 HRA。相同抑制剂配比的硬质合金,硬度和致密度随Co含量的降低而增大。稀土氧化物Y2O3的加入,有利于改善硬质合金的性能。     

钢管标准化工作的思考

综观钢管专业领域内的国内、国际现状和发展趋势,重点介绍了钢管专业标准化工作基本情况、作用和主要成绩;对目前标准化工作存在的主要问题及原因进行分析;指出在国内、国际环境下对标准化工作提出的要求;深入探讨钢管专业标准化工作的重点任务、领域及重点项目。     

Evaluation of Flexural Behavior and Serviceability Performance of Concrete Beams Reinforced with FRP Bars

Flexural behavior and serviceability performance of 24 full-scale concrete beams reinforced with carbon-, glass-, and aramid-fiber-reinforced-polymer (FRP) bars are investigated. The beams were 3,300?mm long with a rectangular cross section of 200?mm in width and 300?mm in depth. Sixteen beams were reinforced with carbon-FRP bars, four beams were reinforced with glass-FRP bars, two beams were reinforced with aramid-FRP bars, and two were reinforced with steel, serving as control specimens. Two types of FRP bars with different surface textures were considered: sand-coated bars and ribbed-deformed bars. The beams were tested to failure in four-point bending over a clear span of 2,750?mm. The test results are reported in terms of deflection, crack-width, strains in concrete and reinforcement, flexural capacity, and mode of failure. The experimental results were compared to the available design codes.     

几种对称钕卟啉配合物的固相合成及电化学性质

在固相条件下合成了四苯基卟啉钕、四 (对羟基苯基 )卟啉钕、四 (对甲氧基苯基 )卟啉钕、四 (对硝基苯基 )卟啉钕四种钕卟啉配合物。并用元素分析、ICP、U V、IR等手段对配合物进行了表征。用循环伏安法研究了它们的电化学性质。实验结果表明 :四种钕卟啉配合物的电化学性质相似。在循环伏安图上均出现了三对氧化还原电位。但由于卟啉环上对位取代基不同 ,峰电位值不同     

Latchkey children and susceptibility to peer pressure: An ecological analysis.

Data on adolescents' after-school experiences and their susceptibility to peer pressure were derived from surveys administered to a heterogeneous sample of 865 adolescents in Grades 5–9. Consistent with the findings of previous studies, the results show that Ss who reported home after school were not significantly different from those who were supervised by their parents at home during after-school hours. However, when a 2nd sample of latchkey children (n?=?594) was studied to include greater variation in after-school experiences, Ss who were more removed from adult supervision were found to be more susceptible to peer pressure to engage in antisocial activity. Ss who were home alone were less susceptible to peer pressure than are those who were at a friend's house after school, and those who were at a friend's house, in turn, were less susceptible than were those who describe themselves as "hanging out." Moreover, latchkey Ss whose parents knew their whereabouts and those who had been raised authoritatively were less susceptible to peer influence than were their peers, even if their afternoons were spent in contexts in which adult supervision was lax and susceptibility to peer pressure was generally high. (17 ref) (PsycINFO Database Record (c) 2010 APA, all rights reserved)