2006～2007年世界塑料工业进展

收集了2006年7月～2007年6月世界塑料工业的相关资料,介绍了2006～2007年世界塑料工业的发展情况,提供了世界塑料产量、消费量及全球各类树脂的需求量及产能情况.按通用热塑性树脂(聚乙烯、聚丙烯、聚苯乙烯、聚氯乙烯、ABS树脂)、工程塑料(尼龙、聚碳酸酯、聚甲醛、热塑性聚酯、聚苯醚)、特种工程塑料(聚苯硫醚、液晶聚合物、聚醚醚酮)、通用热固性树脂(酚醛、聚氨酯、不饱和聚酯树脂、环氧树脂)不同品种的顺序,对树脂的产量、消费量、供需状况及合成工艺、产品应用开发、树脂品种的延伸及应用的进一步扩展等技术作了详细介绍.     

知识创新是工业尿素合成技术创新之本——实验室研究篇

对国内外研究者在尿素合成反应的热力学、动力学、化学平衡及相平衡等方面的研究成果进行了总结和评价,提供了尿素合成反应的热力学、动力学数据和相图,提出了一些新理念.     

意大利ES公司变频器进入中国市场

3月11日,"意科走进中国"新闻发布会在京举行,与来自冶金、石化、电力、建材、水处理、纺织、市政等行业的专家、用户及十几家业内知名的媒体共同分享了意科公司的发展历程,意科变频器的创新标准以及意科在奥运年全面推向中国市场的决心和计划.     

中国工程塑料市场综述(下)

4.3 聚碳酸酯海关进出口分析 1999～2006年间PC进口量年均增长27.91%,比1998～2005年间PC进口量年均增长率31.27%下降3.36个百分点.国内产量偏低、市场需求巨大的现状进一步暴露.中国PC消费主要依靠进口,2006年中国产量仅占总消费量的10%上下.1999～2006年间PC进口量年均增长27.91%,比1998～2005年间Pc进口量年均增长率36.68%下降3.36个百分点.2006年初级形状的聚碳酸酯进口地有45个,主要进口地为泰国(占16.49%),其次为中国(12.86%)、新加坡(11.50%)、美国(10.95%)、日本(10.65%)、韩国(9.81%)、中国台湾省(9.50%)、西班牙(7.46%),八进口地进口量占总进口量的89.2%.     

夹层粘接在大型机床导轨修理中的应用

1 "夹层粘接"新工艺 "夹层粘接"是作者经多年研究、开发的一种新技术,在设备大修理工作中,对于严重摩擦磨损的机床导轨,采用独特的"夹层粘接"工艺,以夹布塑料为加厚层,填充F4为表面耐磨层,使机床导轨恢复了原有的精度和尺寸要求,缩短了修理时间,减轻了劳动强度,节约了修理费用,取得了显著的综合效益.     

加压稀硝"三合一"主机修理小结

我公司年产80 kt加压稀硝装置是国内首例完全国产化装置,其"三合一"主机的汽轮机、减速机由杭汽制造,空压机、膨胀机由陕鼓生产.自1986年装置建成投运以来,每年检修都发现机组气封严重磨损,机壳与转子不同心.为此,公司利用2006年11月大修和2007年7月停车机会对机组进行了全面整修,以期从根本上消除存在的问题.     

工业评述2001～2002年国外塑料工业进展

收集了2001年7月到2002年6月有关国外塑料工业的相关期刊资料,介绍了2001年到2002年国外塑料工业的发展情况,提供了世界各地域塑料原材料的产量及构成比,日本、美国、加拿大、德国、法国、比利时、墨西哥、芬兰、西班牙等国家的树脂产量、消费量及增长率,以及日本、西欧、北美等地区的不同品种塑料原料消费量和增长率统计.按通用热塑性树脂(聚乙烯、聚丙烯、聚苯乙烯、聚氯乙烯、ABS树脂)、工程塑料(尼龙、聚碳酸酯、聚甲醛、热塑性聚酯、聚苯醚)、通用热固性树脂(酚醛、聚氨酯、不饱和树脂、环氧树脂)、特种工程塑料(聚苯硫醚、液晶聚合物、聚醚醚酮)不同品种的顺序,对树脂的产量、消费量及合成工艺、产品应用开发、树脂品种的延伸及应用的进一步扩展等有关技术作了详细的介绍.     

骨胶生产中蒸骨制胶操作方法

1 对蒸骨制胶过程的认识 蒸骨制胶的过程也就是用蒸汽使骨料块在密封的锅内受热、受压,使骨质疏松,由生胶质热解转变为可溶解于热水的动物胶质(习惯上称之为"骨胶")的过程.     

合成TBHQ的工艺改进

研究了以工业品甲基叔丁基醚(MTBE)和对苯二酚(HQ)为原料,在磷酸催化下,合成TBHQ的工艺参数.对催化剂的活性、原料的配比和反应时间等进行了优化考察.当对苯二酚∶甲基叔丁基醚∶磷酸=1∶1∶0.5(mol),反应温度为125℃,反应时间3.5h,TBHQ的收率达85.7%.与传统方法相比,该方法具有价廉、操作简单的特点,具有较高的开发、应用价值.用MTBE作原料合成TBHQ未见有关文献具体报道.     

湖光山色清新隽永——访江西省高级工艺美术师杨修勇

在我的办公桌上,放着一把<井岗山八角楼>粉彩山水壶,每当我空闲时,总喜欢拿在手中把玩,这件小小的山水壶虽不能展现气势豪雄的大写意山水画面,也不可能真正达到烟云满纸的效果,但细腻的工笔,雅静的画意给人一种清心的感觉和享受.     

模外装饰自动换膜机构设计

基于模外装饰工艺原理,对模外装饰自动换膜机构进行了详细设计,其中包含抚平轮和夹紧轮部分、机构固定部分、机架部分和裁刀部分。抚平轮和夹紧轮部分由抚平轮、夹紧轮、轴承、轴承套和摇杆等组成;机构固定部分由电机、压块、压块杆、轴承盖和摇杆等组成,机架部分由滚动导轨副、底板、滚珠丝杆副、步进电机、滚筒支架等组成;裁刀部分由侧板、导向杆、滑块和驱动电机组成。该套模外装饰自动换膜机构能够满足设计要求和实际需要。     

Simulation of the vapor explosion of tin and aluminum oxide fragments in water

The vapor explosion process involves an explosive phase change from a thin liquid film into a vapor with a dramatic change in material properties across a high-pressure shock wave. The energy released during the explosion process can reach a level of chemical explosions associated with detonating high explosives. Because no fuel-air chemical reaction is needed for initiating a vapor explosion, the process can be considered as a green reaction that generates zero pollutants. However, the phase change that accompanies a thousand-fold increase in the vapor volume during the rapid film evaporation is a natural consequence of a sudden change in density across the phase front; this feature closely resembles the process of blast wave generation. The high-pressure vapor produced without a chemical reaction expands as a spherical wave at a uniform velocity predicted through the Rankine-Hugoniot shock conditions. In this paper, a new methodology based on a simple shock wave and a phase field theory is proposed to formulate the vapor explosion process.     

How to calculate phase diagrams for microemulsions — a simple rule

For nonionic microemulsions a simple rule is given to achieve a semiquantitative prediction of phase boundaries. In particular, we consider the phase boundaries between a single-phase microemulsion and a 2Φ-microemulsion (i.e. a microemulsion coexisting with a water- or an oilrich phase), as well as between a 2Φ-microemulsion and a 3Φ-microemulsion (i.e. a microemulsion coexisting with a water- and an oilrich phase). Our method treats weak and strong surfactants within a unified approach.     

Lipoprotein(a): Nonhuman primate models

Lipoprotein(a) [Lp(a)] is a low density lipoprotein which has apo(a) disulfide-linked to apoB100. Apo(a) has recently been shown to have a striking homology with plasminogen, a knowledge that has stimulated a lot of interest in the mechanism of atherogenicity and thrombogenicity of this lipoprotein particle. Several studies have documented the presence of Lp(a) in nonhuman primates with particular reference to the rhesus monkeys and baboons. The Lp(a) of rhesus monkey is structurally very similar to that of humans, except for the absence of kringle V and the amino acid composition of the catalytic region. The Lp(a) of nonhuman primates, like their human counterparts, exhibit a wide range of interindividual plasma levels and also a wide size polymorphism of apo(a). Nonhuman primates appear to represent a good model for the study of the structure and biology of Lp(a).     

GENERAL LINEAR PROCESSES:A PROPERTY OF THE EMPIRICAL PROCESS APPLIED TO DENSITY AND MODE ESTIMATION

Abstract. General linear processes do not usually satisfy strong mixing conditions. Therefore, we investigate the empirical process based on samples from such a general linear process by using a truncation argument and derive a local fluctuation inequality. It is well known that such a fluctuation inequality is of basic importance in the study of the empirical process. Here it is applied to obtain a rate of almost sure (a.s.) convergence for certain density estimators in the supremum norm. This extends a local result obtained by Chanda. As a direct corollary a rate of a.s. convergence for a mode estimator is obtained.     

Gravity draining of a yield-stress fluid through an orifice

We study the draining of a yield-stress fluid from a vertical vessel having a hole or a tube at its bottom. In order to understand the basic process we first study the problem with a Newtonian fluid and show that the flow characteristics can be very well described by assuming that the flow is analogous to that through a straight conduit of given length. For a yield-stress fluid draining through a hole the behaviour is different: the flow stops when the pressure drop across the orifice falls to a finite value which increases as the yield stress of the fluid increases or the hole radius R decreases. All the data collapse onto a master curve when plotted in terms of dimensionless numbers involving a characteristic length which is a function of R. We deduce an empirical model for the flow characteristics in such a case. When a length of tube is added after the hole we show that the characteristics of the flow are similar to those for flow through a straight conduit with an equivalent length equal to the tube length plus a fixed additional length.     

Monitoring the oxidative modification of lipoprotein(a) by capillary zone electrophoresis

Lipoprotein(a) [Lp(a)] is a recognized risk factor for atherosclerotic cardiovascular disease. It is made of a lipoprotein particle containing apoB100 linked by a single disulfide bridge to apolipoprotein(a), a glycosylated protein with a variable mass. Some authors suggest that oxidative modification could explain the contribution of Lp(a) in the development of atheromatous lesions in a comparable way to low‐density lipoproteins (LDL). Recently, the use of capillary electrophoresis to measure the variations in the relative electrophoretic mobility (REM) of LDL subjected to copper oxidation has been proposed. The aim of this work is to employ this method also to monitor the copper‐induced oxidative modification of Lp(a). Migration of Lp(a) was monitored by absorption at 200 nm in a 50 mmol/L tricine, 100 mmol/L methylglucamine, pH 9.7 run buffer. Contrary to the conventional slab gel methods, our procedure provides a rapid and reproducible means to measure the electrophoretic mobility of Lp(a) (migration time <10 min with a CV% <0.5).     

Generalized Orowan-Petch Plot for Brittle Fracture

The fracture of brittle solids is considered to be based on a defect configuration consisting of a stress concentrator, in our case a hemispherical pore, and a starter crack, in our case either a semicircular crack, a circular crack, or a circumferential crack. Computation of the stress field, application of the relevant weight functions, and an averaging scheme based on the assumption of a virtual crack increment provides stress intensity factors for all defect configurations considered. A normalization scheme yields a generalized version of the Orowan-Petch plot in the form of a normalized strength to normalized defect size relationship.     

气固流化床固体浓度分布的冷模研究

在内径0.284 m、高6.0 m的气固流化床冷模装置中进行了气固流化实验,采用PC6 D型颗粒浓度测试仪检测固体浓度. 分别采用枝条型(开孔率a=5‰和2.5‰)和环形(a=5‰)气体分布器,以直径154~180 mm、密度2550 kg/m3的砂子为颗粒,在静床高H0=0.6~1.5 m、表观气速u=0.3~0.6 m/s的情况下,考察了时均固体浓度1-e在空间的分布. 结果表明,增加u使密相区的1-e减小,分布器形状对1-e影响不大. 采用较低a的分布器时1-e的变化较大,且其值均较低. H0=0.6 m, 轴向位置H=0.4 m, u=0.3 m/s, 径向位置r=0~0.142 m时,1-e由0.410上升到0.494;H0=0.6 m, H=0.4~0.95 m, u=0.3 m/s, r=0时,1-e从0.410减小到0;H0=1.5 m, H=0.4~1.3 m, u=0.3 m/s, r=0时,1-e从0.397先下降到0.372,再上升到0.424,最后下降到0.328.     

Successful utilization of lyophilized lipoprotein(a) as a biological reagent

Lipoprotein(a) [Lp(a)] represents a class of lipoprotein particles having as a protein moiety apoB-100 linked by a single disulfide bond to apolipoprotein(a) [apo(a)], a multikringle structure with a high degree of homology with plasminogen. A recognized feature of Lp(a) is its instability on storage caused by attendant protein and lipid modifications that affect the structural, functional, and immunological properties of this lipoprotein. Here we present data showing that, under appropriate conditions of cryopreservation, Lp(a) retains the properties of the freshly isolated product, and we provide examples supporting the stability of this cryopreserved product as a primary standard in immunoassay settings and in cell culture systems.