共查询到20条相似文献,搜索用时 15 毫秒
1.
O Prez‐Camacho S Sepúlveda‐Guzmn M Prez‐lvarez M García‐Zamora G Cadenas‐Pliego 《Polymer International》2005,54(12):1626-1631
New functionalized styrene–maleimide copolymers were prepared by free radical copolymerization of styrene (St) and N‐4‐carboxybutylmaleimide (NBMI) in chloroform, using 2,2′‐azobisisobutyronitrile (AIBN) as initiator. Monomer and copolymer characterization was carried out by 1H‐ and 13C‐NMR. Copolymer composition was determined by elemental analysis and Fourier‐transform infrared (FTIR) spectroscopy. The glass transition temperature (from DSC) and the thermogravimetric analysis (TGA) of the copolymers were consistent with the thermal behavior and stability observed for alternating St–maleimide copolymers. St–NBMI copolymers crosslinked with divinylbenzene (DVB) were also synthesized and their cation exchange properties evaluated in order to assess the capacity of the new copolymers to bind metallic ions. Copyright © 2005 Society of Chemical Industry 相似文献
2.
Styrene–isoprene A2B2 star copolymers having two arms of polystyrene and two of polyisoprene have been synthesised. Two routes have been followed. In the first, 2 moles of polydienyl lithium were coupled, without loss of carbanionic character, by reacting with 1 mole of 1,3-bis(1-phenylethenyl) benzene. The difunctional adduct was then used to initiate the polymerisation of styrene in the presence of a small amount of triethylamine which served to ensure a rapid crossover. In the second route, 2 moles of polystyrl lithium were coupled with 1 mol of SiCl4 in benzene; no attendant formation of three-armed star was detected. Introduction of large excess of polyisoprenyl lithium, together with triethylamine as catalyst, generated the star which was isolated by fractional precipitation. 相似文献
3.
Solubility behavior of amphiphilic sulfonated copolymers based on styrene–stearyl methacrylate and styrene–stearyl cinnamate
下载免费PDF全文
![点击此处可从《应用聚合物科学杂志》网站下载免费的PDF全文](/ch/ext_images/free.gif)
Luiz Carlos Magalhães Palermo Nelson Francisco Souza Jr. Alexandre Carneiro Silvino Denise Gentili Nunes Elizabete Fernandes Lucas 《应用聚合物科学杂志》2016,133(15)
Amphiphilic polymers have found many applications, so many types of these copolymers have been prepared. Specifically, sulfonated polystyrene acts, for example, as a flocullant or dispersant of petroleum asphaltenes as a function of its hydrophilic–hydrophobic balance. However, when changing the sulfonation degree, looking for the best performance, the solubility also changes, and sometimes it is responsible for making the polymer unsuitable for any application. Therefor, this work investigates in detail the changes in the solubility range of copolymers based on styrene–stearyl methacrylate and styrene–stearyl cinnamate with different molar compositions and different sulfonation degrees. The copolymers were synthesized and characterized by 1H‐NMR, Fourier transform infrared spectroscopy, and elemental analysis. In the range of compositions analyzed, with increasing content of long hydrocarbon chains, not only the displacement of the solubility in solvents with lower solubility parameter (δ), but also the broadening of the solubility range was observed. In general, the solubility was directly related to the sulfonic group content, but there appeared to be an influence of the randomness of the sulfonation reactions along the chains. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43112. 相似文献
4.
Thermal radical copolymerization of styrene (S) and maleimide (MI) at 125°C in diglyme in the presence of 2,2,6,6‐tetramethylpiperidin‐1‐yloxyl radical (TEMPO) was studied. Mole fractions of maleimide in the feed, FMI, varied in the range 0.1–0.9. A quasiliving reaction process proceeded yielding copolymers with a low polydispersity (Mw/Mn = 1.17–1.41). The found azeotropic composition, (FMI)A = 0.46, did not differ substantially from that (0.5) in the conventional radical S‐MI copolymerization. At a higher conversion or MI content in the feed, deactivation of the copolymer chains occurred. The obtained TEMPO‐terminated S‐MI copolymers readily initiated polymerization of styrene; chain extension of the macroinitiators took place, giving poly(S‐co‐MI)‐block‐poly(S) diblock copolymers. The synthesized copolymers containing S and MI units were characterized by elemental analysis, NMR spectroscopy, size‐exclusion chromatography, and differential scanning calorimetry. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 1863–1868, 2004 相似文献
5.
Synthesis and characterization of polyaspartic acid–glutamic acid grafted copolymers and their performances as detergent builder
下载免费PDF全文
![点击此处可从《应用聚合物科学杂志》网站下载免费的PDF全文](/ch/ext_images/free.gif)
Polysuccinimide (PSI) was first synthesized via thermal polycondensation reaction using maleic anhydride and urea as the starting materials. Then, polyaspartic acid–glutamic acid (PASP–GLU) grafted copolymers were prepared from PSI and GLU. The structure of PASP–GLU was characterized by Fourier transform infrared spectroscopy and nuclear magnetic resonance spectroscopy. The molecular weight was measured by gel permeation chromatography, and the crystallinity was analyzed by X‐ray diffraction spectra. The effects of grafting ratio on the builder performances were systematically studied, as well as on the thermal property and biodegradability. It is demonstrated that as the grafting ratio of GLU increases, the thermal stability and biodegradability decrease a little, but still maintain in high level. Most importantly, the incorporation of GLU into side chains significantly improves the builder performance of PASP–GLU. The maximum values for calcium ion chelating power, dispersion power of CaCO3, and alkali‐buffer ability reach 233.2 mg, 108.9 mg, and 1.70 mL, respectively, at the highest grafting ratio, in which the dispersion power of CaCO3 and alkali‐buffer ability are even better than that of sodium tripolyphosphate. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40282. 相似文献
6.
The heat‐resistant copolymer of N‐phenylmaleimide (NPMI)–styrene (St)–maleic anhydride (MAH) was synthesized in xylene at 125°C with di‐tert‐butyl diperoxyterephthalate as an initiator. The characteristics of the copolymer were analyzed by Fourier transform infrared spectroscopy, nuclear magnetic resonance spectroscopy (1H‐NMR and 13C‐NMR), gel permeation chromatography, and elemental analysis. The 13C‐NMR results show that the copolymer possessed random sequence distribution; this was also supported by the differential scanning calorimetry experiment, in which a single glass‐transition temperature (Tg) of 202.3°C was observed. The thermal stability and degradation mechanism of the copolymer were investigated by thermogravimetric analysis. Using the Kissinger equation and Ozawa equation, we proved a nucleation controlling mechanism with an apparent activation energy of 144 kJ/mol. Blends of acrylonitrile–butadiene–styrene with the NPMI–St–MAH copolymer with various contents were prepared with a twin‐screw extruder processes. The mechanical and thermal properties of the materials, such as the tensile and flexural strength, Tg's, and Vicat softening temperatures, were all enhanced with the addition of the modifier, whereas the melt flow index decreased. © 2012 Wiley Periodicals, Inc. J Appl Polym Sci, 2012 相似文献
7.
In this study, maleic anhydride (MA)–styrene (St)–allyl propionate (AP) was produced with MA, St, and AP. It was then reacted with n‐propyl alcohol (Pr), n‐butyl alcohol (Bu), n‐pentyl alcohol (Pn), and benzyl alcohol (Bz) under certain conditions to produce ester derivatives of the terpolymer. These ester derivatives were designated alkyl maleate terpolymers (PrMA–St–AP, BuMA–St–AP, PnMA–St–AP, and BzMA–St–AP). The polymers were investigated by solubility and viscosity experiments, with the number of ester groups in the polymers determined by chemical analysis. They were also characterized by Fourier transform infrared spectroscopy, with thermomechanical properties measured via stress–strain curves. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 296–299, 2003 相似文献
8.
Styrene–maleic anhydride (SMA) copolymers containing either 7 or 14% maleic anhydride were filled with either pine flour or dry-process aspen fiber from a medium density fiberboard (MDF) plant. Material properties of the filled and unfilled SMA plastics were compared with those of aspen-fiber-filled and unfilled polystyrene (PS). The fiber-filled SMA composites were equivalent or superior to unfilled SMA in strength, stiffness, and notched Izod impact strength. Filled PS composites outperformed or matched the performance of filled SMA composites in the parameters tested. Unnotched Izod impact strength of filled polymers was generally inferior to that of the unfilled polymers. Water absorption from a 90% relative humidity exposure, a 24-h soak, and a 2-h boil showed mixed results when compared to the unfilled polymers. Dynamic mechanical analysis showed no change in glass transition temperature (Tg) after the addition of filler for either SMA or PS composites. The presence of the anhydride functionality on the polymer backbone did not appear to improve the strength of the composite. No evidence was found for chemical bond formation between the SMA and wood fiber. © 1998 John Wiley & Sons, Inc. J Appl Polym Sci 68: 1567–1573, 1998 相似文献
9.
A copolymer of styrene and maleic anhydride was synthesized by free radical polymerization at 80°C using N,N‐dimethylformamide (DMF) as solvent and benzoylperoxide as initiator. The monomer feed ratio of styrene to maleic anhydride was varied in the range of 1 : 1 : to 3 : 1. The polymer yield was found to decrease with increase in styrene in the feed. The molecular weight of copolymers which were formed by taking styrene to maleic anhydride ratio of 1 : 1, 2 : 1, and 3 : 1, as determined by Ostwald Viscometery were about 1862, 2015, and 2276 respectively. The acid values of abovementioned three copolymers were found to be 480, 357, and 295, respectively. The typical viscosity values of 20% solids in ammonical solution of copolymers formed by taking feed ratios of Sty : MAn as 1 : 1 and 2 : 1 were 26 and 136 cp, respectively. For the feed ratio 3 : 1, a gel was formed. The synthesized copolymers were hydrolyzed by alkalis, namely, NaOH, KOH, and NH4OH. The dispersing ability of hydrolyzed styrene‐maleic anhydride (SMA) copolymers for dispersion of titanium dioxide was studied. The modified SMA copolymers were found to be effective dispersants for TiO2. Among the three alkalis studied, the Sodium salts of SMA were found to give better dispersion. The copolymer having a 1 : 1 feed ratio showed the best dispersing ability for TiO2 particles among the three ratios studied. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 3194–3205, 2007 相似文献
10.
Synthesis and properties of new water‐soluble copolymers based on methyl acrylic acid sucrose ester and methyl acrylic acid
下载免费PDF全文
![点击此处可从《应用聚合物科学杂志》网站下载免费的PDF全文](/ch/ext_images/free.gif)
The new series of copolymers were obtained based on free radical solution copolymerization by mixing self‐made methyl acrylic acid sucrose ester (MASE) and methyl acrylic acid (MAA) with different ratios. Copolymerization behavior and properties of the new copolymers was investigated with the reaction time, temperature, monomer ratios and characterized by Fourier transform infrared spectra (FT‐IR), carbon nuclear magnetic resonance (13C NMR), and intrinsic viscosity. The results indicated that sucrose was successfully grafted onto poly (methyl acrylic acid). Further, it was demonstrated that low temperature benefited the esterification of MASE. Importantly, the copolymers were founded to have good compatibility with polymethyl methacrylate (PMMA), polytetrafluoroethylene (PTFE), and polyethylene (PE). © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43627. 相似文献
11.
12.
The synthesis and characterization of a series of poly(siloxane–imide) block (or segmented) copolymers obtained by copolymerization of amine‐terminated polydimethylsiloxane with fluorinated aromatic compounds containing anhydride and amine functionality are reported. New fluorinated block copolymers have been synthesized to obtain organophilic polyimides potentially interesting for molecular membrane separations. The new aspects of this work relative to the literature are (1) a comparison of solution and solid‐state approaches in the imidization step to generate the target poly(siloxane–imide) copolymers and (2) exploration of new compositions involving fluorinated aromatic polymers derived from added diamine compounds. It is shown that the copolymer properties can be tailored from glassy to rubbery materials by varying the amount and the type of oligosiloxane used; the transition between glassy and rubbery properties is characterized at a siloxane content of 60 wt%. As a main result, it is shown that the solid‐state approach for inducing the cyclo‐imidization step is the more efficient one for synthesizing polymers with good mechanical properties, when the amount of siloxane block is increased in the copolymer series. Physical and chemical methods (thermogravimetric analysis, Fourier transform infrared spectroscopy, viscosity measurements) were used to characterize the copolymer properties obtained according to the two different synthesis routes. The obtained siloxane–imide copolymers are well soluble in a large variety of moderately polar solvents and exhibit very good thermal stability up to 400 °C. Hence the prepared copolyimides would seem to be promising candidates as organophilic membranes as well as gas permeation membranes. © 2012 Society of Chemical Industry 相似文献
13.
Copolymerization of styrene (S) and diethyl fumarate (DEF) at 125°C in the presence of 2,2,6,6‐ tetramethylpiperidin‐1‐yloxyl radical (TEMPO) and initiated with a thermal initiator, 2,2′‐azobisisobutyronitrile (AIBN), was studied. The molar fraction of DEF in the feed, FDEF, varied within 0.1–0.9. An azeotropic composition, (FDEF)A = 0.38, was found for the copolymerization under study. At FDEF = 0.1–0.4, a quasi‐living process was observed, transforming to a retarded conventional radical copolymerization at a higher content of DEF in the initial mixtures. The obtained TEMPO‐terminated S‐DEF copolymers were used to initiate polymerization of styrene. Poly(styrene‐ co‐diethyl fumarate)‐block‐polystyrene copolymers were prepared with molecular weight distributions depending on the amount of inactive polymer chains in macroinitiators, as indicated by size‐exclusion chromatography. A limited miscibility of the blocks in the synthesized block copolymers was revealed by using differential scanning calorimetry. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 84: 2432–2439, 2002 相似文献
14.
Hamid Javaherian Naghash Shadpour Mallakpour Nader Mokhtarian 《Progress in Organic Coatings》2006,55(4):375-381
The triethoxyvinylsilane (TEVS) containing vinyl acetate (VAc)/2-ethylhexylacrylate (2-EHA) copolymers were prepared by emulsion copolymerization. The polymerization was performed with methacrylic acid (MAA) and auxiliary agents at 80 °C in the presence of ammonium peroxodisulfate (APS) as the initiator. Alkyl phenol ether sulfate and Arkupal N-300 were used as anionic and nonionic emulsifiers, respectively. The resulting copolymers were characterized by using Fourier transform infrared spectroscopy (FTIR). Thermal properties of the copolymers were studied by using thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC). The morphology of copolymers was also investigated by scanning electron microscopy (SEM) and then the effects of temperature, agitation speed, initiator and silicone concentrations on the properties of the silicone-modified VAc–acrylic emulsion copolymers were discussed. The obtained copolymers have high solid content (53%) and can be used in emulsion paints as a binder. The calculations of monomer conversion versus time histories and monomer conversion indicate that by increasing the TEVS concentration, the polymerization rate and the number of polymer particles decrease, respectively. 相似文献
15.
The free‐radical retrograde‐precipitation polymerization (or FRRPP) process, a free‐radical polymerization that occurs above the lower critical solution temperature (LCST), was extended to copolymer formation. Control over the rate of polymerization and entrapment of polymer radicals in the FRRPP process was used to generate tapered styrene–acrylic acid block copolymers. To show the effectiveness of the FRRPP process, the same procedure was used with solvents that are not LCST‐based precipitants for the polymer. Kinetic data show substantial chain termination in non‐FRRPP copolymerization systems. Molecular weight information also shows propagation control in the FRRPP system. Solubilization and emulsification studies also indicate the capability of the FRRPP system in generating a much higher proportion of amphiphilic tapered block copolymers in the solid product. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 426–431, 2003 相似文献
16.
采用卤化氰-酚合成法制备了酚酞型CE(氰酸酯),并采用红外光谱(FT-IR)法、质谱法、核磁共振氢谱(1H-NMR)法、毛细管法和差示扫描量热(DSC)法等对酚酞型CE的结构和性能进行了表征和分析,同时对其热性能和热解动力学行为进行了研究。结果表明:酚酞型CE的合成条件为"-15℃搅拌反应1 h→升温至5℃搅拌反应4 h→5℃保温反应2 h";目标产物失重5%温度为435℃,最大失重速率温度为453℃,表观活化能为222.49 kJ/mol,指前因子为1013.97s-1;将酚酞型CE加入到胶粘剂的基础配方中,相应胶粘剂的综合性能略高于基础配方胶粘剂。 相似文献
17.
The viscoelastic relaxation of linear styrene–butadiene–styrene triblock copolymer (l‐SBS) and star styrene–butadiene–styrene triblock copolymer (s‐SBS) with four arms were investigated with differential scanning calorimetry and dynamic rheological measurements. Three characteristic viscoelastic responses of l‐SBS and s‐SBS in the plot of the loss tangent (tan δ) and temperature at different frequencies (ω's), which corresponded to the relaxation of the polybutadiene (PB) block (peak I), the glass transition of the polystyrene (PS) phase (peak II), and the mutual diffusion between the PB blocks and PS blocks (peak III), respectively, were observed in the experimental range. Although ω was 0.1 rad/s, a noticeable peak III was gained for both l‐SBS and s‐SBS. The dynamic storage modulus (G′) of l‐SBS showed two distinct types of behavior, depending on the temperature. At temperature (T) < T2 (where T2 is the temperature corresponding to peak II), G′ of l‐SBS displayed a very weak ω dependency. In contrast, at T > T2, G′ decayed much more rapidly. However, G′ of s‐SBS displayed a very weak ω dependency at both T < T2 and T > T2. Only near T2 did s‐SBS decay with ω a little sharply. These indicated, in contrast to l‐SBS, that s‐SBS still exhibited more elasticity even at T > T2 because of its crosslinking point between the PB blocks (the star structure). In the lower ω range, l‐SBS exhibited a stronger peak III than s‐SBS despite the same styrene content for l‐SBS and s‐SBS. The high tan δ value of peak III for l‐SBS was considered to be related to the internal friction among the PB blocks or the whole l‐SBS chain, not the PS blocks. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011 相似文献
18.
The variation of the pore structure of styrene–divinylbenzene (S–DVB) copolymer beads with the drying conditions was investigated. Macroporous S–DVB copolymer beads with various DVB contents were prepared in the presence of toluene‐cyclohexanol mixtures as a diluent. It was found that the pores of 101‐nm radius, corresponding to the interstices between the microspheres, collapse upon drying of the copolymers from toluene. The collapsed pores reexpand if the copolymers were dried from methanol. The collapse–reexpansion process of the pores was found to be reversible, indicating that the actual pore structure formed during the crosslinking copolymerization is memorized by the copolymer network. The magnitude of the pore structure variation increased on worsening the polymer–diluent interactions during the gel formation process due to the simultaneous increase in crosslink density distribution. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 71: 1055–1062, 1999 相似文献
19.
Free‐radical copolymerization of 4‐nitrophenyl acrylate (NPA) with n‐butyl methacrylate (BMA) was carried out using benzoyl peroxide as an initiator. Seven different mole ratios of NPA and BMA were chosen for this study. The copolymers were characterized by IR, 1H‐NMR, and 13C‐NMR spectral studies. The molecular weights of the copolymers were determined by gel permeation chromatography and the weight‐average (M w) and the number‐average (M n) molecular weights of these systems lie in the range of 4.3–5.3 × 104 and 2.6–3.0 × 104, respectively. The reactivity ratios of the monomers in the copolymer were evaluated by Fineman–Ross, Kelen–Tudos, and extended Kelen–Tudos methods. The product of r1, r2 lies in the range of 0.734–0.800, which suggests a random arrangement of monomers in the copolymer chain. Thermal decomposition of the polymers occurred in two stages in the temperature range of 165–505°C and the glass transition temperature (Tg) of one of the systems was 97.2°C. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 88: 1817–1824, 2003 相似文献
20.
The swelling capacity of porous styrene–divinylbenzene (DVB) copolymers in water was studied by displacing methanol from the swollen polymer. The copolymers with different amounts of DVB were prepared in the presence of solvents with different solvating powers as inert diluents. Using a solvating solvent or its mixture with a nonsolvent as diluent, most of the obtained copolymers increase their volume in water, and the increase in volume becomes more significant with increasing the degree of crosslinking in some range of the DVB contents. The swelling capacity in water for the same copolymers with a high degree of crosslinking is linearly dependent on the dilution degree in the initial reaction mixture, to some extent. The unusual swelling behaviors in water were explained by the inner strain, which existed mainly in the less crosslinked domains between the highly crosslinked microgel particles, which are released in the course of swelling of the copolymers. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 75: 536–544, 2000 相似文献