Synthesis and characterization of graft copolymers of syndiotactic polystyrene with polybutadiene and 4‐methylstyrene

The basic method for synthesizing syndiotactic polystyrene‐g‐polybutadiene graft copolymers was investigated. First, the syndiotactic polystyrene copolymer, poly(styrene‐co‐4‐methylstyrene), was prepared by the copolymerization of styrene and 4‐methylstyrene monomer with a trichloro(pentamethyl cyclopentadienyl) titanium(IV)/modified methylaluminoxane system as a metallocene catalyst at 50°C. Then, the polymerization proceeded in an argon atmosphere at the ambient pressure, and after purification by extraction, the copolymer structure was confirmed with ¹H‐NMR. Lastly, the copolymer was grafted with polybutadiene (a ready‐made commercialized unsaturated elastomer) by anionic grafting reactions with a metallation reagent. In this step, poly(styrene‐co‐4‐methylstyrene) was deprotonated at the methyl group of 4‐methylstyrene by butyl lithium and further reacted with polybutadiene to graft polybutadiene onto the deprotonated methyl of the poly(styrene‐co‐4‐methylstyrene) backbone. After purification of the graft copolymer by Soxhlet extraction, the grafting reaction copolymer structure was confirmed with ¹H‐NMR. These graft copolymers showed high melting temperatures (240–250°C) and were different from normal anionic styrene–butadiene copolymers because of the presence of crystalline syndiotactic polystyrene segments. Usually, highly syndiotactic polystyrene has a glass‐transition temperature of 100°C and behaves like a glassy polymer (possessing brittle mechanical properties) at room temperature. Thus, the graft copolymer can be used as a compatibilizer in syndiotactic polystyrene blends to modify the mechanical properties to compensate for the glassy properties of pure syndiotactic polystyrene at room temperature. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Synthesis and property behavior of dioctyl phthalate plasticized styrene–acrylate particles by Shirasu porous glass emulsification and subsequent suspension copolymerization

Two‐phase model styrene–acrylate copolymers were synthesized with a soft phase consisting of methyl acrylate, butyl acrylate, and butyl methacrylate. Besides the styrenic copolymers, copolymers containing a hard phase of methyl methacylate and methyl acrylate were also synthesized. Comonomer droplets with a narrow size distribution and fair uniformity were prepared using an SPG (Shirasu porous glass) membrane having pore size of 0.90 μm. After the single‐step SPG emulsion, the emulsion droplets were composed mainly of monomers, hydrophobic additives, and an oil‐soluble initiator, suspended in the aqueous phase containing a stabilizer and inhibitor. These were then transferred to a reactor, and subsequent suspension polymerization was carried out. Uniform copolymer particles with a mean diameter ranging from 3 to 7 μm, depending on the recipe, with a narrow particle size distribution and a coefficient of variation of about 10% were achieved. Based on the glass‐transition temperatures, as measured by differential scanning calorimetry, the resulting copolymer particles containing a soft phase of acrylate were better compatibilized with a hard phase of methyl methacrylate than with styrene with dioctyl phthalate (DOP) addition. Glass‐transition temperatures of poly(MMA‐co‐MA) particles were strongly affected by the composition drift in the copolymer caused by their substantial difference in reactivity ratios. Incorporation of DOP in the copolymer particles does not significantly affect the glass‐transition temperature of MMA‐ or MA‐containing copolymer particles, but it does affect the St‐containing copolymer and particle morphology of the copolymers. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 3037–3050, 2003     

Thermal and sonochemical degradation kinetics of poly(n‐butyl methacrylate‐co‐alkyl acrylates): Variation of chain strength and stability with copolymer composition

The thermal degradation of poly(n‐butyl methacrylate‐co‐alkyl acrylate) was compared with ultrasonic degradation. For this purpose, different compositions of poly (n‐butyl methacrylate‐co‐methyl acrylate) (PBMAMA) and a particular composition of poly(n‐butyl methacrylate‐co‐ethyl acrylate) (PBMAEA) and poly(n‐butyl methacrylate‐co‐butyl acrylate) (PBMABA) were synthesized and characterized. The thermal degradation of polymers shows that the poly(alkyl acrylates) degrade in a single stage by random chain scission and poly(n‐butyl methacrylate) degrades in two stages. The number of stages of thermal degradation of copolymers was same as the majority component of the copolymer. The activation energy corresponding to random chain scission increased and then decreased with an increase of n‐butyl methacrylate fraction in copolymer. The effect of methyl acrylate content, alkyl acrylate substituent, and solvents on the ultrasonic degradation of these copolymers was investigated. A continuous distribution kinetics model was used to determine the degradation rate coefficients. The degradation rate coefficient of PBMAMA varied nonlinearly with n‐butyl methacrylate content. The degradation of poly (n‐butyl methacrylate‐co‐alkyl acrylate) followed the order: PBMAMA < PBMAEA < PBMABA. The variation in the degradation rate constant with composition of the copolymer was discussed in relation to the competing effects of the stretching of the polymer in solution and the electron displacement in the main chain. POLYM. ENG. SCI., 2013. © 2012 Society of Plastics Engineers     

AB‐ and ABC‐type di‐ and triblock copolymers of poly[styrene‐block‐(ε‐caprolactone)] and poly[styrene‐block‐(ε‐caprolactone)‐block‐lactide]: synthesis,characterization and thermal studies

Polystyrene terminated with benzyl alcohol units was employed as a macroinitiator for ring‐opening polymerization of ε‐caprolactone and L ‐lactide to yield AB‐ and ABC‐type block copolymers. Even though there are many reports on the diblock copolymers of poly(styrene‐block‐lactide) and poly(styrene‐block‐lactone), this is the first report on the poly(styrene‐block‐lactone‐block‐lactide) triblock copolymer consisting of two semicrystalline and degradable segments. The triblock copolymers exhibited twin melting behavior in differential scanning calorimetry (DSC) analysis with thermal transitions corresponding to each of the lactone and lactide blocks. The block derived from ε‐caprolactone also showed crystallization transitions upon cooling from the melt. In the DSC analysis, one of the triblock copolymers showed an exothermic transition well above the melting temperature upon cooling. Thermogravimetric analysis of these block copolymers showed a two‐step degradation curve for the diblock copolymer and a three‐step degradation for the triblock copolymer with each of the degradation steps associated with each segment of the block copolymers. The present study shows that it is possible to make pure triblock copolymers with two semicrystalline segments which also consist of degradable blocks. Copyright © 2009 Society of Chemical Industry     

Toughness,dynamic mechanical property,and morphology of polyvinylchloride/acrylonitrile‐styrene‐butyl acrylate blends

Acrylonitrile‐styrene‐butyl acrylate (ASA) graft copolymers with different acrylonitrile (AN) contents, the core‐shell ratio, and tert‐dodecyl mercaptan (TDDM) amounts were synthesized by seed emulsion polymerization. Polyvinylchloride (PVC)/ASA blends were prepared by melt blending ASA graft copolymers with PVC resin. Then the toughness, dynamic mechanical property, and morphology of the PVC/ASA blends were investigated. The results indicated that the impact strength of the PVC/ASA blends increased and then decreased with the increase of the AN content in poly(styrene‐co‐acrylonitrile (SAN) copolymer, and increased with the increase of the core‐shell ratio of ASA. It was shown that brittle‐ductile transition of PVC/ASA blends was dependent on poly(butyl acrylate) (PBA) rubber content in blends and independent of AN content in SAN copolymer. The introduction of TDDM made the toughness of PVC/ASA blends poor. Dynamic mechanical analysis (DMA) curves exhibited that PVC and SAN copolymers were immiscible over the entire AN composition range. From scanning electron microscopy (SEM), it was found that the dispersion of ASA in PVC/ASA blends was dependent on the AN content in SAN copolymer and TDDM amounts. J. VINYL ADDIT. TECHNOL., 22:43–50, 2016. © 2014 Society of Plastics Engineers     

Poly(N‐hydroxyethyl acrylamide)‐b‐polystyrene by combination of ATRP and aminolysis processes

Block copolymers of very hydrophilic poly(N‐hydroxyethyl acrylamide) (PHEAA) with polystyrene (PS) were successfully synthesized by sequential atom transfer radical polymerization of ethyl acrylate (EA) and styrene monomers and subsequent aminolysis of the acrylic block with ethanolamine. Quantitative aminolysis of poly(ethyl acrylate) (PEA) block yielded poly(N‐hydroxyethyl acrylamide)‐b‐polystyrene in well‐defined structures, as evidenced by Fourier transform infrared spectroscopy (FTIR) and ¹H‐NMR spectroscopy techniques. Three copolymers with constant chain length of PHEAA (degree of polymerization: 80) and PS blocks with 21, 74, and 121 repeating units were prepared by this method. Among those, the block copolymer with 21 styrene repeating units showed excellent micellation behavior in water without phase inversion below 100°C, as inferred from dynamical light scattering, environmental scanning electron microscopy, and fluorescence measurements. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Specific interactions in poly(styrene‐co‐2‐hydroxyethyl acrylate)/poly(styrene‐co‐N,N‐dimethylacrylamide) systems

Amphiphilic copolymers of poly(styrene‐co‐2‐hydroxyethyl acrylate) (SHEA) and poly(styrene‐co‐N, N‐dimethylacrylamide) (SAD) of different compositions were prepared by free radical copolymerization and characterized by different techniques. Depending on the nature of the solvent and the densities of interacting species incorporated within the polystyrene matrices, novel materials as blends or interpolymer complexes with properties different from those of their constituents were elaborated when these copolymers are mixed together. The specific interpolymer interactions of hydrogen bonding type and the phase behavior of the elaborated materials were investigated by differential scanning calorimetry (DSC) and Fourier transform infra red spectroscopy (FTIR). The specific interactions of hydrogen bonding type that occurred within the SHEA and within their blends with the SAD were evidenced by FTIR qualitatively by the appearance of a new band at 1626 cm^?1 and quantitatively using appropriate spectral curve fitting in the carbonyl and amide regions. The variation of the glass transition temperature with the blend composition behaved differently with the densities of interacting species. The thermal degradation behavior of the materials was studied by thermogravimetry. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Peroxide macro‐initiators for improving biodegradability of polymers

Modification of dextrin by tert‐butylperoxy methanol or its acylation with cyclic anhydride containing a peroxide group resulted in macro‐initiators with randomly located peroxide fragments in the polysaccharide. When dextran was oxidized with iodic acid, dialdehydedextran was obtained. Its aldehyde groups reacted with tert‐butyl hydroperoxide to give functional peroxide groups. The content of peroxide fragments depended directly on the ratio of reagents. The resulting macro‐initiators may be used for synthesizing graft copolymers with polystyrene on poly(butyl acrylate) containing polysaccharide. © 2001 Society of Chemical Industry     

Synthesis and biodegradability evaluation of 2‐methylene‐1,3‐dioxepane and styrene copolymers

Biodegradable copolymers of 2‐methylene‐1,3‐dioxepane (MDO) and styrene (ST) were synthesized by free‐radical copolymerization using di‐t‐butyl peroxide (DTBP) as the initiator. The copolymers containing ester units were characterized by Fourier transform infrared (FTIR), ¹H‐NMR, and ¹³C‐NMR spectroscopy. Their molecular weight and polydispersity index were determined by gel permeation chromatography (GPC). In vitro enzymatic degradation of poly(MDO‐co‐ST) was performed at 37°C in phosphate buffer solution (PBS, pH = 7.4) in the presence of Pseudomonas lipase or crude enzyme extracted from earthworm. The experiment showed that incorporating ester units into C? C backbone chain of polystyrene would result in a biodegradable copolymer. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 1146–1151, 2007     

Design and Synthesis of Mechano‐Responsive Color‐Changing Thermoplastic Elastomer Based on Poly(n‐Butyl Acrylate)–Spiropyran‐Polystyrene Comb‐Structured Graft Copolymers

Colorimetric mechanophores like spiropyran (SP) represent an emerging type of interesting signal molecule that can be incorporated into polymers or other materials as a stress transducer. In this work, a new type of spiropyran‐containing inimer molecule MA‐SP‐Br are designed and synthesized, which is incorporated into polybutylacrylate (PBA) chains through reversible addition‐fragmentation chain transfer (RAFT) copolymerization with n‐butyl acrylate (BA). PBA‐SP‐Br is then used as a macro‐initiator to graft polystyrene (PS) side chains from the PBA backbone through atom transfer radical polymerization (ATRP) of styrene. The resulting comb‐structured graft copolymer PBA‐SP‐PS contains 0.15–0.34% SP and exhibits a characteristic feature of thermoplastic elastomers. Under uniaxial stretch, the materials possess an excellent mechano‐responsivity and change color at strains as low as about 14%.     

Graft copolymers from commercial chlorinated polypropylene via Cu(0)‐mediated atom transfer radical polymerization

Commercially available chlorinated polypropylene has been used as a macroinitiator for the Cu(0)‐mediated atom transfer radical polymerization of methyl methacrylate and tert‐butyl acrylate to obtain well‐defined graft copolymers. The relatively narrow molecular weight distribution in the graft copolymers and linear kinetic plots indicated the controlled nature of the copolymerization reactions. Both Fourier transform infrared and ¹H NMR studies confirmed that the graft reactions had taken place successfully. After graft copolymer formation, tert‐butyl groups of poly(tert‐butyl acrylate) side chains were completely converted into poly(acrylic acid) chains to afford corresponding amphiphilic graft copolymers. © 2016 Society of Chemical Industry     

Control of monodisperse particle size of styrenic–acrylate copolymers in dispersion copolymerization

Syntheses of monodisperse poly[(styrene)‐co‐(n‐butyl acrylate)] and poly[(styrene)‐co‐(2‐ethylhexyl acrylate)] were carried out by dispersion polymerization. The reactions were performed in the mixed solvent of ethanol–water in the presence of azo‐bisisobutyronitrile and poly(N‐vinylpyrrolidone) as the initiator and dispersant, respectively. The effects of reaction parameters, that is the type and concentration of dispersant, ratio of the mixed solvent, reaction temperature, agitation rate, monomer composition between styrene and n‐butyl acrylate or 2‐ethylhexyl acrylate, crosslinking agent and reaction time on the particle size, size distribution and average molecular weights of the resulting copolymer were thoroughly investigated. The resulting copolymer particles were smooth on their spherical surface and the sizes were in the range 0.6–1.8 µm with a narrow size distribution. In most cases, a correlation between small particle sizes with high average molecular weights was observed. The average particle size generally increased with increasing reaction temperature, time and acrylate monomer content. In contrast, the particle size decreased as the molecular weight, concentration of dispersant, polarity of the medium or agitation rate was increased. The glass transition temperature (T_g) of the copolymers can be controlled by the mole ratio of the comonomer. The T_g values decreased when the content of acrylate monomers in the copolymer increased, and T_g values of the synthesized copolymer were in the range 66–102 °C. Instead of using n‐butyl acrylate monomer in the copolymerization, 2‐ethylhexyl acrylate copolymerization with styrene resulted in insignificant changes in the particle sizes but there were significant decreases in T_g values. In this study, the monodisperse particles can be obtained by monitoring the appropriate conditions regarding PVP K‐30 (2–8 wt%), ethanol/water (90/10 wt%), the reaction temperature (70 °C) and the agitation rate (100 rpm). © 2000 Society of Chemical Industry     

A Synthetic Approach to Star‐Like Polymers of Styrene and Butyl Acrylate by Linking Reactions using Functionalized Methacrylates

Summary: Coupling reactions between terminal functionalized polymer chains were chosen for the synthesis of star‐like polymers consisting of polystyrene and polystyrene‐block‐poly[styrene‐co‐(butyl acrylate)] arms. For the preparation of terminal functionalized polymer chains a side reaction of the 2,2,6,6‐tetramethylpiperidine‐N‐oxyl (TEMPO) mediated free radical polymerization of methacrylates could be used successfully to convert TEMPO terminated polymers into end functionalized polymers. The number of functionalized monomer units attached to the polymer chain is directly related to the TEMPO concentration during this reaction. Different polystyrenes and polystyrene‐block‐poly[styrene‐co‐(butyl acrylate)] block copolymers were functionalized with a variable number of epoxide and alcohol groups at the chain end. For the determination of the optimal reaction parameters for the coupling reactions between these polymer chains, epoxy functionalized polystyrenes were converted with hydroxy functionalized polystyrenes under basic and acidic conditions. By activation with sodium hydride or boron trifluoride star‐like polymers were synthesized under mild conditions. The transfer of the reaction conditions to coupling reactions between end functionalized polystyrene‐block‐poly[styrene‐co‐(butyl acrylate)] copolymers showed that star‐like polymers with more than 12 arms were formed using boron trifluoride as activating agent.

     

Blends of poly(2,6‐dimethyl‐1,4‐phenylene oxide)/polyamide 6 toughened by maleated polystyrene‐based copolymers: Mechanical properties,morphology, and rheology

Poly(2,6‐dimethyl‐1,4‐phenylene oxide)/polyamide 6 (PPO/PA6 30/70) blends were impact modified by addition of three kinds of maleated polystyrene‐based copolymers, i.e., maleated styrene‐ethylene‐butylene‐styrene copolymer (SEBS‐g‐MA), maleated methyl methacrylate‐butadiene‐styrene copolymer (MBS‐g‐MA), and maleated acrylonitrile‐butadiene‐styrene copolymer (ABS‐g‐MA). The mechanical properties, morphology and rheological behavior of the impact modified PPO/PA6 blends were investigated. The selective location of the maleated copolymers in one phase or at interface accounted for the different toughening effects of the maleated copolymer, which is closely related to their molecular structure and composition. SEBS‐g‐MA was uniformly dispersed in PPO phase and greatly toughened PPO/PA6 blends even at low temperature. MBS‐g‐MA particles were mainly dispersed in the PA6 phase and around the PPO phase, resulting in a significant enhancement of the notched Izod impact strength of PPO/PA6 blends from 45 J/m to 281 J/m at the MBS‐g‐MA content of 20 phr. In comparison, the ABS‐g‐MA was mainly dispersed in PA6 phase without much influencing the original mechanical properties of the PPO/PA6 blend. The different molecule structure and selective location of the maleated copolymers in the blends were reflected by the change of rheological behavior as well. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

In situ polarity functionalization and properties of styrenic triblock copolymers synthesized via RAFT emulsion polymerization

The in situ polarity functionalization of the styrenic triblock copolymers was accomplished via the block introduction of polar monomer, n‐butyl acrylate, with the help of reversible addition‐fragmentation chain transfer (RAFT) emulsion polymerization. The polarity functionalization, microphase separation, static and dynamic mechanical properties, water resistance, transparency, and thermal stability of the synthesized polarity‐functionalized triblock copolymers, polystyrene‐block‐poly(n‐butyl acrylate)‐block‐polystyrene (SAS), were extensively studied. The poly(n‐butyl acrylate) (PBA) middle block higher than 10 wt % has the favorable toughening effect on polystyrene (PSt) two‐end block due to the microphase separation in SAS. The glass transition of the continuous plastic phase (mainly composed of PSt block) has a much greater influence on the storage modulus than that of the dispersed rubber phase (mainly composed of PBA block). The polarity‐functionalized SAS has good water resistance, high transparency, and robust thermal stability. The polarity‐functionalized SAS will have such a potential application broadening as polar adhesive. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 44603.     

Novel Poly(linolenic acid) Graft Copolymers: Synthesis,Characterization and Electrical Properties

A poly(linolenic acid)‐g‐poly(tert‐butyl acrylate) graft copolymer was synthesized from polymeric linolenic acid peroxide possessing peroxide groups in the main chain by free radical polymerization of tert‐butyl acrylate. Graft copolymers having structures of poly(linolenic acid)‐g‐poly(caprolactone)‐g‐poly(tert‐butyl acrylate) were synthesized from polymeric linolenic acid, possessing peroxide groups on the main chain by the combination of free radical polymerization of tert‐butyl acrylate and ring‐opening polymerization of ε‐caprolactone in one‐pot. The obtained graft copolymers were characterized by proton nuclear magnetic resonance, gel permeation chromatography, thermal gravimetric analysis, differential scanning calorimetry, and scanning electron microscopy techniques. Furthermore, Au/n‐Si diodes were fabricated with and without poly(linolenic acid)‐g‐poly(caprolactone)‐g‐poly(tert‐butyl acrylate)‐4 to form a new interfacial polymeric layer for the purpose of investigating this polymer's conformity in electronic applications. Some main electrical characteristics of these diodes were investigated using experimental current–voltage measurements in the dark and at room temperature.     

Morphologies and dynamic mechanical properties of core‐shell emulsifier‐free latexes and their copolymers for P(BA/MMA)/P(MMA/BA) and P(BA/MMA)/PSt systems in the presence of AHPS

Different poly(methyl methacrylate/n‐butyl acrylate)/poly(n‐butyl acrylate/methyl methacrylate) [P(BA/MMA)/P(MMA/BA)] and poly(n‐butyl acrylate/methyl methacrylate)/polystyrene [P(BA/MMA)/PSt] core‐shell structured latexes were prepared by emulsifier‐free emulsion polymerization in the presence of hydrophilic monomer 3‐allyloxy‐2‐hydroxyl‐propanesulfonic salt (AHPS). The particle morphologies of the final latexes and dynamic mechanical properties of the copolymers from final latexes were investigated in detail. With the addition of AHPS, a latex of stable and high‐solid content (60 wt %) was prepared. The diameters of the latex particles are ～0.26 μm for the P(BA/MMA)/P(MMA/BA) system and 0.22–0.24 μm for the P(BA/MMA)/PSt system. All copolymers from the final latexes are two‐phase structure polymers, shown as two glass transition temperatures (T_gs) on dynamic mechanical analysis spectra. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 3078–3084, 2002     

Atom transfer radical polymerization grafting of highly functionalized polystyrene and poly(4‐methylstyrene) macroinitiators with tert‐butyl acrylate

Two monodisperse graft copolymers, poly(4‐methylstyrene)‐graft‐poly(tert‐butyl acrylate) [number‐average molecular weight (M_n) = 37,500, weight‐average molecular weight/number‐average molecular weight (M_w/M_n) = 1.12] and polystyrene‐graft‐poly(tert‐butyl acrylate) (M_n = 72,800, M_w/M_n = 1.12), were prepared by the atom transfer radical polymerization of tert‐butyl acrylate catalyzed with Cu(I) halides. As macroinitiators, poly{(4‐methylstyrene)‐co‐[(4‐bromomethyl)styrene]} and poly{styrene‐co‐[4‐(1‐(2‐bromopropionyloxy)ethyl)styrene]}, carrying 40% of the bromoalkyl functionalities along the chain, were used. The dependencies of molecular parameters on monomer conversion fulfilled the criteria for controlled polymerizations. In contrast, the dependencies of monomer conversion versus time were nonideal; possible causes were examined. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 2930–2936, 2002     

Synthesis,properties and thermal stability of water‐soluble poly(potassium 1‐hydroxyacrylate‐co‐styrene) copolymer

The present work investigates the structure properties of copolymers using thermogravimetric analysis, hot stage microscopy, static light scattering, field emission scanning electron microscopy, X‐ray diffraction analysis and a Brookfield viscometer. Poly(potassium 1‐hydroxyacrylate) (PKHA) is a water‐soluble polymer. However, the copolymer of styrene and 2‐isopropyl‐5‐methylene‐1,3‐dioxolan‐4‐one is not water soluble at equal molar ratio because the polystyrene reduces the solubility. The effect of styrene on poly(potassium 1‐hydroxyacrylate‐co‐styrene) copolymer, i.e. poly(KHA‐co‐St), was investigated for the increasing solubility of the copolymer. The solubility was increased at a lower molar ratio of styrene such as 0.4 in the copolymer. It was found that the copolymer was soluble in water when a content ratio of 68/32 mol% of homopolymer was incorporated in poly(KHA₆₈‐co‐St₃₂) copolymer as determined by NMR analysis. Also the poly(KHA₆₈‐co‐St₃₂) copolymer was found to be salt tolerant, possessed water absorption capacity and was thermally stable up to 183 °C. Moreover, it is shown that the polystyrene content plays a key role in the thermal stability of the copolymer. © 2017 Society of Chemical Industry     

Synthesis and characterization of block comb‐like copolymers P(A‐MPEO)‐block‐PSt

Amphiphilic block comb‐shaped copolymers, poly[poly(ethylene oxide) methyl ether acrylate]‐block‐polystyrene [P(A‐MPEO)‐block‐PSt] with PSt as a handle, were successfully synthesized via a macromonomer technique. The reaction of MPEO with acryloyl chloride yielded a macromonomer, A‐MPEO. The macroinitiator PSt capped with the dithiobenzoate group (PSt‐SC(S)Ph) was prepared by reversible addition–fragmentation transfer (RAFT) polymerization of styrene in the presence of benzyl dithiobenzoate, and used as macroinitiator in the controlled radical block copolymerization of A‐MPEO at room temperature under ⁶⁰Co irradiation. After the unreacted macromonomer A‐MPEO had been removed by washing with hot saturated saline water, block comb‐shaped copolymers were obtained. Their structure was characterized by ¹H NMR spectroscopy and gel permeation chromatography. The phase transition and self‐assembling behaviour were investigated by atomic force microscope and differential scanning calorimetry. Copyright © 2004 Society of Chemical Industry