Structure and piezoelectric properties of new ternary K<Subscript>0.5</Subscript>Na<Subscript>0.5</Subscript>NbO<Subscript>3</Subscript>–LiSbO<Subscript>3</Subscript>–CaTiO<Subscript>3</Subscript> lead-free piezoceramics

New ternary (1−x)K_0.5Na_0.5NbO₃–x(0.80LiSbO₃–0.20CaTiO₃) lead-free ceramics were fabricated by a conventional ceramic technique and their structure and piezoelectric properties were studied. The results of X-ray diffraction reveal that LiSbO₃ and CaTiO₃ diffuse into the K_0.5Na_0.5NbO₃ lattices to form a new solid solution with a perovskite structure. After the addition of LiSbO₃ and CaTiO₃, the cubic-tetragonal and tetragonal-orthorhombic phase transitions shift to lower temperatures. Coexistence of the orthorhombic and tetragonal phases is hence formed in the ceramics with 0.03 < x < 0.07 at room temperature, leading to a significant enhancement of the piezoelectric properties. For the ceramics with x = 0.04–0.06, the piezoelectric properties become optimum: d ₃₃ = 172–253 pC/N, k _P = 49.9–55.5%, k _t = 49.2–52.1% and T _C = 348–373 °C. The ceramic with x = 0.04 also exhibits a good thermal stability of piezoelectric properties.     

Electrical properties of B site substituted (K<Subscript>0.48</Subscript>Na<Subscript>0.52</Subscript>)(W<Subscript>2/3</Subscript>Bi<Subscript>1/3</Subscript>)<Subscript>x</Subscript>Nb<Subscript>1−x</Subscript>O<Subscript>3</Subscript> piezoceramics

Lead-free (K_0.48Na_0.52)(W_2/3Bi_1/3)_xNb_1−xO₃ (KNN-WBi) piezoceramics with x ranging from 0.004 to 0.010 were synthesized by conventional ceramic processing. The sintered KNN-WBi ceramics showed perovskite structure without detectable secondary phase containing W and Bi. With increasing x, the orthorhombic-tetragonal phase transition temperature (T _O-T) decreased from 200 to 184 °C whereas, the tetragonal-cubic phase transition temperature (T _C) decreased slightly. With the doping of (W_2/3Bi_1/3), the piezoelectric properties were greatly improved and the piezoelectric constants d ₃₃, k _p, Q _m exhibited maximum values of 136 pC/N, 43.3% and 175, respectively at x = 0.008. The KNN-WBi ceramics also exhibited good ferroelectric properties with remnant polarizations P _r higher than 25 μC/cm² and coercive fields E _c lower than 1,000 V/mm. The results strongly suggest that the B site doping of constructed quinquevalent element is an effective method for the investigation of potassium sodium niobate system.     

Good thermal stability and improved piezoelectric properties of (K<Subscript>0.5</Subscript>Na<Subscript>0.5</Subscript>)NbO<Subscript>3</Subscript>–Bi(Mg<Subscript>0.75</Subscript>W<Subscript>0.25</Subscript>)O<Subscript>3</Subscript> solid solutions

In this paper, (1 ? x)(K_0.5Na_0.5)NbO₃–xBi(Mg_0.75W_0.25)O₃ (x = 0–0.015) lead-free dielectric ceramics were investigated. XRD analysis certified that the Bi(Mg_0.75W_0.25)O₃ has diffused into (K_0.5Na_0.5)NbO₃ to fabricate a new solid solution. The addition of Bi(Mg_0.75W_0.25)O₃ depressed the orthorhombic–tetragonal phase transition temperature from 210 to 176 °C and tetragonal–pseudocubic phase transition temperature (Curie point) from 419 to 400 °C. As x = 0.005, the ceramics exhibited high relative permittivity (ε ~ 1325), low dielectric loss (tan δ < 2.9%) tan δ stability (Δε/ε_168°C ≤ ±15%) in the temperature range of 168 ~ 369 °C. Especially, the ceramics also showed optimized piezoelectric constant (d ₃₃ = 122 pC N^?1) and remnant polarization (P_r = 32.57 μC cm^–2). These results indicated that the BMW added ceramics have potential applications in ferroelectric and thermal stability devices.     

Two-step sintering and electrical properties of sol–gel derived 0.94(Bi<Subscript>0.5</Subscript>Na<Subscript>0.5</Subscript>)TiO<Subscript>3</Subscript>–0.06BaTiO<Subscript>3</Subscript> lead-free ceramics

Two-step pressureless sintering of sol–gel derived 0.94(Bi_0.5Na_0.5)TiO₃–0.06BaTiO₃ (BNT-BT) lead-free piezoelectric ceramics were investigated in comparison with conventional sintering. The effect of sintering regimes on the densification, grain growth behavior and electrical properties was discussed in detail. The results indicated that BNT-BT ceramics with a density of 95%, a relatively fine grain size of 850 nm and comparable piezoelectric properties (d₃₃ ~170 pC/N, k_p ~0.26, Q_m ~102) had been achieved by pre-sintering at 1,150 °C to reach a critical density of 78%, and then cooling to a lower temperature of 1,050 °C for 20 h. The critical density value proves important at which the grain boundary diffusion could be maintained but the grain boundary migration suppressed at the same time. Moreover, the volatilization loss of Bi and Na elements could be inhibited by two-step sintering. Both the reduction of the grain size and the inhibition of the stoichiometry deviation together account for the variation of various electrical properties.     

Structural and high temperature conduction studies of (Na<Subscript>0.46</Subscript>Bi<Subscript>0.46</Subscript>Ba<Subscript>0.08</Subscript>) (Mn<Subscript>x</Subscript>Ti<Subscript>1−x</Subscript>O<Subscript>3</Subscript>)–CuO lead-free piezoelectric ceramics

Polycrystalline lead-free (Na_0.46Bi_0.46Ba_0.08)(Mn_xTi_1?xO₃)?+?0.2CuO ceramics (x?=?0.0, 0.5, 2.0, 3.0 wt%) were prepared via solid-state reaction method. X-ray diffraction (XRD) analysis confirmed the formation of single-phase perovskite structure and indicated the presence of morphotropic phase boundary, where the tetragonal and rhombohedral phases co-existed for all the synthesized compositions. Scanning electron microscopy (SEM) analysis revealed that the average grain size decreased with the increase in Mn content. Impedance spectroscopy (IS) indicated that Mn doping was found to decrease the grain boundary resistance. Two semi-circles were observed for higher Mn content which indicates the contribution of both bulk grains and grain boundaries. Non-Debye type and temperature dependent relaxation phenomenon was also revealed by IS studies. The activation energies at different frequencies were found to be 0.05–0.9 eV, indicating hopping charge conduction mechanism. These results have comprehensive implications for the expanded use of BNT based lead free piezoelectric ceramics for practical applications.     

High-pressure synthesis,structure, and electrical properties of Li<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>Na<Subscript>1 − <Emphasis Type="Italic">x</Emphasis></Subscript>NbO<Subscript>3</Subscript> solid solutions

The dielectric permittivity of Li _x Na_{1 ? x} NbO₃ ferroelectric solid solutions prepared at high pressures has been measured as a function of temperature and frequency, and their structural properties have been studied. The results demonstrate that ceramics samples of the Li _x Na_{1 ? x} NbO₃ (x = 0.17, 0.25) ferroelectric perovskite solid solutions exhibit superionic conduction at relatively low temperatures (T ≥ 400 K). In the temperature range of superionic conduction, we observe significant dielectric dispersion and anomalies in permittivity, corresponding to structural transformations of the high-pressure solid solutions.     

Dielectric and piezoelectric properties of Bi<Subscript>0·5</Subscript>(Na<Subscript>0·82</Subscript>K<Subscript>0·18</Subscript>)<Subscript>0·5</Subscript> TiO<Subscript>3</Subscript>-LiSbO<Subscript>3</Subscript> lead-free piezoelectric ceramics

The (1−x)Bi_0·5(Na_0·82K_0·18)_0·5TiO_3−x LiSbO₃ (x = 0−0·03) lead-free piezoelectric ceramics were fabricated by a conventional solid-state reaction method and the effect of LiSbO₃ addition on microstructure and electrical properties of the ceramics was investigated. The results of XRD measurement show that Li⁺ and Sb⁵⁺ diffuse into the Bi_0·5(Na_0·82K_0·18)_0·5TiO₃ lattices to form a solid solution with a pure perovskite structure. The LiSbO₃ addition has no remarkable effect on the crystal structure. However, a significant change in grain size took place. Simultaneously, with increasing amount of LiSbO₃, the temperature for a antiferroelectric to paraelectric phase transition clearly increases. The piezoelectric constant d ₃₃ and the electromechanical coupling factor k _p show an obvious improvement by adding small amount of LiSbO₃, which shows optimum values of d ₃₃ = 175 pC/N and k _p = 0·36 at x = 0·01.     

Crystal structure and properties of BaTiO<Subscript>3</Subscript>–(Bi<Subscript>0.5</Subscript>Na<Subscript>0.5</Subscript>)TiO<Subscript>3</Subscript> ceramic system

(1 − x)BaTiO₃–x(Bi_0.5Na_0.5)TiO₃ (x ranged from 0.01 to 0.96) ceramics were fabricated by the conventional ceramic technique. The crystal structure, as well as dielectric and piezoelectric properties of the ceramics were studied. All the ceramics formed single-phase solid solutions with perovskite structure after sintering in air at 1150–1250 °C for 2–4 h. The crystal structure and microstructure varied gradually with the increase of (Bi_0.5Na_0.5)TiO₃ (BNT) content. The Curie temperature, T _c, shifted monotonously to high temperature as BNT increased. The ceramics with 20–90 mol% BNT had relatively low and stable dielectric loss characteristics. The piezoelectric constant, d ₃₃, enhanced with the increase of BNT content through a maximum value in a composition of 93 mol% BNT and then tended to decrease. The maximum value, 148 pC/N, of piezoelectric constant d ₃₃ together with the electromechanical coupling factors, k _t, 19.8% and k _p, 15.8%, were obtained when BNT was 93 mol%.     

Investigation on the synthesis of (Zn<Subscript>1−x</Subscript>Mg<Subscript>x</Subscript>)TiO<Subscript>3</Subscript> and the modulation effect of CaTiO<Subscript>3</Subscript>

(Zn_1−xMg_x)TiO₃ (x = 0.1–0.5) solid solutions were synthesized by solid-state reaction using ZnO, (MgCO₃)₄·Mg(OH)₂·5H₂O and TiO₂ as raw materials. The influences of Zn: Mg ratio and calcining temperature on the properties of (Zn_1−xMg_x)TiO₃ were studied. By adding CaTiO₃ into (Zn_1−xMg_x)TiO₃, the microwave properties and sintering behavior were improved. The ceramics could be sintered at 1150 °C, and the ceramics with excellent microwave properties of τ_f ≈ ±10 ppm/°C, ε ≈ 24, Q × f > 45000 GHz (8 GHz) were obtained.     

Ferroelectric and piezoelectric properties of new NaNbO<Subscript>3</Subscript>–Bi<Subscript>0.5</Subscript>K<Subscript>0.5</Subscript>TiO<Subscript>3</Subscript> lead-free ceramics

New lead-free ceramics (1–x)NaNbO₃–xBi_0.5K_0.5TiO₃ have been fabricated by the conventional ceramic sintering technique, and their ferroelectric and piezoelectric properties have been studied. The results of X-ray diffraction reveal that Bi_0.5K_0.5TiO₃ diffuses into the NaNbO₃ lattices to form a new perovskite-type solid solution with orthorhombic symmetry. The addition of a small amount of Bi_0.5K_0.5TiO₃ (x ≥ 0.025) transforms the ceramics from antiferroelectric to ferroelectric. The ceramic with x = 0.10 possesses the largest remanent polarization P _r and thus exhibits the optimum piezoelectric properties, giving d ₃₃ = 71 pC/N, k _p = 16.6% and k _t = 39.7%. The ceramics with low doping level of Bi_0.5K_0.5TiO₃ are normal ferroelectrics and the ferroelectric-paraelectric phase transition becomes diffusive gradually with the doping level x of Bi_0.5K_0.5TiO₃ increasing. Our results show the (1–x)NaNbO₃–xBi_0.5K_0.5TiO₃ ceramics is one of the good candidates for lead-free piezoelectric and ferroelectric materials.     

Characterization and electrical conductivity of La<Subscript>1−x</Subscript>Sr<Subscript>x</Subscript>CrO<Subscript>3</Subscript> NTC ceramics

The La_1?xSr_xCrO₃ (x?=?0–0.1) negative temperature coefficient (NTC) ceramics have been prepared by the traditional solid state reaction method. X-ray diffraction (XRD) analysis has revealed that the as-sintered ceramics crystallize in a single perovskite structure. Scanning Electron Microscope (SEM) images show that the doped Sr²⁺ contributes to in the decrease in porosity. X-ray photoelectron spectroscopy (XPS) analysis indicates the existence of Cr³⁺ and Cr⁶⁺ ions on lattice sites, which result in hopping conduction. The presence of the Cr⁶⁺ is one of the key factors that affect the electrical conductivity of La_1?xSr_xCrO₃. Resistance–temperature characteristics were studied in the range of ?80 to 10?°C for the ceramic samples, the electrical characterizations show that the electrical resistivity and material constant B decrease with the increase of the strontium content.     

Fabrication of lead-free piezoelectric (Bi<Subscript>0.5</Subscript>Na<Subscript>0.5</Subscript>)TiO<Subscript>3</Subscript>–BaTiO<Subscript>3</Subscript> ceramics using electrophoretic deposition

Electrophoretic deposition (EPD) process has certain advantages such as it can be applied for a mass production and also can be combined with magnetic crystal alignment technique. In this work, we prepared lead-free 85(Bi_0.5Na_0.5)TiO₃–15BaTiO₃ (85BNT–15BT) piezoelectric ceramics by conventional uniaxial pressing and EPD process. Various conditions were optimized such as suspension media, applied electrical field, and deposition time in order to yield dense green ceramics of 85BNT–15BT composition using EPD process. 85BNT–15BT ceramics prepared using EPD process revealed the Curie temperature of about 250 °C, coercive field of about 30 kV/cm, and piezoelectric constant (d ₃₃) of 75 pC/N. The EPD-processed samples exhibited structural and electrical properties similar to that of the conventionally processed one suggesting the successful fabrication of 85BNT–15BT piezoelectric ceramics by EPD method without composition deviation. This study lays a foundation on the fabrication of Bi-based lead-free piezoelectric ceramics by an alternative route other than the conventionally practiced solid-state reaction method maintaining the similar chemical composition, moreover, leaving a large space to explore more in the future.     

Synthesis and study of structural,dielectric, magnetic and magnetoelectric properties of K<Subscript>0.5</Subscript>Na<Subscript>0.5</Subscript>NbO<Subscript>3</Subscript>–CoMn<Subscript>0.2</Subscript>Fe<Subscript>1.8</Subscript>O<Subscript>4</Subscript> composites

Magnetoelectric (ME) composites consisting of K_0.5Na_0.5NbO₃ (KNN) as ferroelectric phase and CoMn_0.2Fe_1.8O₄ (CMFO) as ferrite phase with general formula (x) CoMn_0.2Fe_1.8O₄–(1???x) K_0.5Na_0.5NbO₃ (x?=?10, 20, 30, 40 and 50 wt%) were synthesized using solid state reaction method. X-ray diffraction analysis asserts the existence of component phases including spinel phase of CMFO and orthorhombic phase of KNN. Field emission scanning electron microscopy has been used for studying the morphology and calculation of average grain size. The temperature dependent dielectric properties including dielectric constant (\(\varepsilon ^{\prime}\)) and dielectric loss (tan δ) at different frequencies has been studied and both are found to increase with incorporation of CMFO. Magnetic hysteresis loops have been measured at temperatures of 300 and 5 K. Variation of magnetization versus temperature has been studied in field cooled and zero field cooled modes. Polarization versus electric field (P–E) hysteresis loops are obtained at room temperature indicating presence of ferroelectric ordering in the composites at room temperature. The remnant polarization (2P_r) and coercive field (2E_c) are found to decrease linearly with incorporation of CMFO. ME voltage coefficient (α_ME) has been measured. The maximum value of α_ME is found to be 5.941 mV/cm-Oe for 10% CMFO–90% KNN bulk composite.     

Effect of gamma radiation on electrical and optical properties of (TeO<Subscript>2</Subscript>)<Subscript>0·9</Subscript> (In<Subscript>2</Subscript>O<Subscript>3</Subscript>)<Subscript>0·1</Subscript> thin films

We have studied in detail the gamma radiation induced changes in the electrical properties of the (TeO₂)_0·9 (In₂O₃)_0·1 thin films of different thicknesses, prepared by thermal evaporation in vacuum. The current–voltage characteristics for the as-deposited and exposed thin films were analysed to obtain current versus dose plots at different applied voltages. These plots clearly show that the current increases quite linearly with the radiation dose over a wide range and that the range of doses is higher for the thicker films. Beyond certain dose (a quantity dependent on the film thickness), however, the current has been observed to decrease. In order to understand the dose dependence of the current, we analysed the optical absorption spectra for the as-deposited and exposed thin films to obtain the dose dependences of the optical bandgap and energy width of band tails of the localized states. The increase of the current with the gamma radiation dose may be attributed partly to the healing effect and partly to the lowering of the optical bandgap. Attempts are on to understand the decrease in the current at higher doses. Employing dose dependence of the current, some real-time gamma radiation dosimeters have been prepared, which have been found to possess sensitivity in the range 5–55 μGy/μA/cm². These values are far superior to any presently available real-time gamma radiation dosimeter.     

Micro-structural,dielectric, ferroelectric and piezoelectric properties of mechanically processed (Pb<Subscript>1−x</Subscript>La<Subscript>x</Subscript>)(Zr<Subscript>0.60</Subscript>Ti<Subscript>0.40</Subscript>)O<Subscript>3</Subscript> ceramics

In this work, (Pb_1?xLa_x)(Zr_0.60Ti_0.40)O₃ (PLZT x/60/40, x?=?at.%) ceramics were prepared by using high energy mechanical ball milling followed by cold isostatic pressing (CIP), investigated for their micro-structural, dielectirc, ferroelectric and piezoelectric properties. Mechanical activation results in the highly reactive nature of the nano size milled PLZT powders, which enables the partial perovskite phase formation, confirmed by room temperature XRD patterns. CIP leads to a higher density with a closely packed dense microstructure of sintered PLZT ceramics shown in SEM images. The grain size of PLZT x/60/40 ceramics was found to be decreasing with increasing La³⁺ content. The highest relative density of ~?97% was found to be for PLZT 8/60/40 ceramics with grain size of ~?1.35 µm. The PLZT 8/60/40 system also shows the highest dielectric constant of ~?1976, remnant polarization of 29.1 µC/cm², piezoelectric coefficients (d₃₃?\(~ \cong ~\)?570 pC/N, g₃₃?\(~ \cong ~\)?28.03?×?10^?3 Vm/N) and electromechanical coupling factors (k_p?=?k₃₃?=?64.1% and k₃₁?=?54%). The elastic compliances for the PLZT x/60/40 ceramics were also obtained.     

Poling effects and piezoelectric properties of PVDF-modified 0–3 connectivity cement-based/lead-free 0.94(Bi<Subscript>0.5</Subscript>Na<Subscript>0.5</Subscript>)TiO<Subscript>3</Subscript>–0.06BaTiO<Subscript>3</Subscript> piezoelectric ceramic composites

PVDF-modified 0–3 connectivity cement-based/lead-free 0.94(Bi_0.5Na_0.5)TiO₃–0.06BaTiO₃ piezoelectric ceramic composites were fabricated using 0.94(Bi_0.5Na_0.5)TiO₃–0.06BaTiO₃ (BNBT), Portland cement, and polyvinylidene fluoride (PVDF). The microstructure, acoustic impedance (Z _c), dielectric properties, and influence of poling temperature and electrical poling field on the piezoelectric coefficient (d ₃₃) and the total period of the poling process of composites with 50 vol% BNBT and 1–10 vol% PVDF were investigated. The results indicated that Z _c, the dielectric constant, and the dielectric loss of the composites decrease as the PVDF content increases. The d ₃₃ of the composites was found to enhance more clearly when the content of PVDF is more than 2 vol%. The d ₃₃ results of the composites showed an optimum increase of 45% when 5 vol% PVDF was used (under an electrical poling field of 1.5 kV/mm and a poling temperature of 80°C). Moreover, these composites with PVDF were found to exhibit enhanced poling behavior in that the PVDF was able to reduce the total period of the poling process. Interestingly, the piezoelectric voltage coefficient (g ₃₃) of the composite with 5 vol% PVDF content had the highest value of 33.59 mV·m/N. Therefore, it can be safely concluded that this new kind of PVDF-modified 0–3 connectivity cement-based/lead-free 0.94(Bi_0.5Na_0.5)TiO₃–0.06BaTiO₃ piezoelectric ceramic composite has the potential to be used in concrete as a sensor for structural health monitoring applications.     

Electrical and oxygen sensing properties of Nd<Subscript>1−x</Subscript>Ba<Subscript>x</Subscript>CoO<Subscript>3</Subscript> ceramics

Nd_1?xBa_xCoO₃ (0?≤?x?≤?0.2) ceramics was synthesized by solid state reaction. All the samples have an orthorhombic perovskite structure (Space group P n m a). The electrical transport property indicates that Ba doped NdCoO₃ ceramics goes through semiconductor–metal phase transition. The electrical resistivity of Nd_1?xBa_xCoO₃ (0?≤?x?≤?0.15) ceramics decreases, while the electrical resistivity of Nd_0.8Ba_0.2CoO₃ ceramics increases with the increase of temperature. The chemical-sensing property shows that Nd_1?xBa_xCoO₃ ceramics is very sensitive to oxygen. Also, increasing Ba²⁺ doping concentration can reduce the oxygen desorption rate and increase the sensitivity of resistivity. These results indicate that Ba²⁺ doped NdCoO₃ ceramics is not only the good candidate of the cathode materials of solid fuel cells but also the good materials of gas sensor devices.     

Structure,electrical and magnetic properties of La<Subscript>0.67</Subscript>Ca<Subscript>0.33−<Emphasis Type="Italic">x</Emphasis></Subscript>K<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>MnO<Subscript>3</Subscript> polycrystalline ceramic

A systematic investigation of structure, electrical and magnetic properties of polycrystalline ceramics La_0.67Ca_0.33?x K _x MnO₃ (x?=?0.05, 0.10, 0.15, 0.20, 0.25) samples, prepared by sol–gel method had been undertaken. As K content increases the crystal structures were transformed from orthorhombic to rhombohedral structure identified by X-ray diffraction, and the effect of increasing K ion is to increment the Mn–O–Mn bond angle. The surface morphology was investigated by scanning electron microscope, which indicates that grain size decreasing with increasing of K⁺. Temperature dependence of resistivity (ρ ? T) was measured by standard four-probe method. The insulator–metal transition temperature (T _P ) shifted to higher temperature and the temperature coefficient of resistivity decreased sharply with the substitution K⁺ for Ca²⁺ ion. The temperature dependence of magnetization (M–T) shown that Curie temperature (T _C ) was increasing with the increase of K content, which can be explained by enhancement of double–exchange interaction. The data of resistivity on low-temperature (T?<?T _P ) had been fitted with the relation ρ(T) = ρ ₀?+?ρ ₂T²?+?ρ _4.5T^4.5; the high-temperature (T?>?T _P ) resistivity data were explained using small-polaron hopping and variable-range hopping models. Resistivity data in whole temperature range (100–320 K) could be fitted by percolation model. Polaron activation energy E _a was found to decrease with the content K⁺ increasing, which suggested that K doping increase bond angle Mn–O–Mn, thereby the effective band gap was decreased and the double exchange coupling was increased of, this is the reason for the decrease of resistivity.     

Dielectric and impedance studies of (Pb<Subscript>1−x</Subscript>Ca<Subscript>x</Subscript>)(Fe<Subscript>0.5</Subscript>Nb<Subscript>0.5</Subscript>)O<Subscript>3</Subscript> dielectric ceramics

Ceramic samples of (Pb_1?xCa_x)(Fe_0.5Nb_0.5)O₃ with x = 0.20, 0.40, 0.45, 0.50, 0.55 and 0.60 were obtained by columbite precursor method. All the synthesized samples have perovskite structure with pseudo-cubic symmetry. Dielectric properties of all the samples were measured as a function of frequency from room temperature up to 573 K. Two dielectric anomalies were observed in ε_r–T plots at about 400 and 500 K. The impedance analysis depicts a single relaxation process. Activation energies obtained from temperature dependence of relaxation frequency, f₀ and grain resistance, R_g were found to be more or less comparable. The observed relaxation in all the samples seems to be due to electron relaxation associated with oxygen vacancies.     

Laser and electromagnetic loss properties of Perovskite SmNi<Subscript>x</Subscript>Fe<Subscript>1−x</Subscript>O<Subscript>3</Subscript>

SmNi_xFe_1?xO₃ (0?≤?x?≤?0.5) with perovskite-type structure has been successfully prepared by conventional solid-state reaction as a microwave and laser multi-functional material. The optimized synthesis temperature and the effects of Ni doping on the reflectivity, electromagnetic loss properties were investigated in details. XRD results shown that synthesis temperature did not change the perovskite structure of SmFeO₃. The reflectivity at 1.06 μm was about 0.33% at 1200–1300?°C. Doping Ni did not cause the change of perovskite structure. The incorporation of Ni in SmFeO₃ contributed to the decrease of reflectivity at a wider wavelength, SmNi_0.3Fe_0.7O₃ possessed the lowest reflectivity at 1.06 μm. Moreover, electromagnetic property was very sensitive to Ni content. The real and imaginary parts of complex permeability were enhanced remarkably at a certain frequency. The changes in magnetic performance provided possibility of choosing specific frequency of magnetic loss. The difference in electric and magnetic losses caused by Ni concentration could result in microwave absorption at different frequency. In a word, SmNi_xFe_1?xO₃ could be a promising candidate for a multi-functional material with compatible camouflage capability for radar and laser waveband.