Photoluminescence properties of emission-tunable Ca9Y(PO4)7: Tm,Dy phosphor for white light emitting diodes

A white-emitting Ca₉Y(PO₄)₇: Tm³⁺, Dy³⁺ phosphor has been successfully prepared by conventional high-temperature solid-state reaction. X-ray diffraction (XRD) and fluorescence spectrophotometer were used to characterize the as-synthesized phosphors. The excitation and emission spectra show that all the Tm³⁺ and Dy³⁺ co-doped Ca₉Y(PO₄)₇ samples can be effectively excited by UV light and then emit blue and yellow light simultaneously. Furthermore, the emission and color coordinate of as-obtained samples pumped by 365 nm are able to be adjusted around white light by varying the doping concentrations of Tm³⁺ and Dy³⁺. So, the as-fabricated single-composition Ca₉Y(PO₄)₇: Tm³⁺, Dy³⁺ phosphor will have a promising application in the area of white light emitting diodes.     

The UV and VUV luminescence properties of the phosphor Mg2GeO4:Tb

A novel green phosphor Mg₂GeO₄:Tb³⁺ with pure phase was prepared by the solid state reaction. The luminescence properties were investigated in detail. The diffusion reflection spectra of the undoped and Tb³⁺ doped Mg₂GeO₄ phosphors were recorded, the result reveals that there is an absorption band superposition of the host material and Tb³⁺ ion. The study on the excitation and diffusion spectra shows that there is an effective energy transfer from the host material to Tb³⁺ ion. Under 277 and 172 nm excitation, the phosphor presents predominant green emission at 543 and 547 nm respectively. The excitation intensity at 172 nm is about 1.8 times of that at 272 nm. The promising luminescence properties make it a candidate for application in Plasma Display Panel.     

Persistent luminescence of SrAl2O4: Eu,Dy, Cr phosphors in the tissue transparency window

We report on the persistent luminescence of SrAl₂O₄: Eu²⁺, Cr³⁺ phosphor centered at 760 nm. The phosphor was prepared by sol-gel-combustion method. Persistent luminescence from Cr³⁺ lasted for hundreds of seconds, comparable to the long afterglow from Eu²⁺ ions in the visible region based on the continuous energy transfer from Eu²⁺ ions to Cr³⁺ ions. The introduction of Dy³⁺ ions into the phosphor further prolonged the afterglow time of Eu²⁺ and Cr³⁺ ions through the depth control of the charge traps. The optimum doping concentrations for Eu²⁺, Cr³⁺ and Dy³⁺ were 1%, 2% and 1.5%, respectively.     

White-emitting phosphors Ca6La2Na2(PO4)6F2:Dy and luminescence enhancement through Ce → Dy energy transfer

Ce³⁺ and Dy³⁺ activated fluoro-apatite Ca₆La₂Na₂(PO₄)₆F₂ with chemical formulas Ca₆La_2−xLn_xNa₂(PO₄)₆F₂ (Ln = Ce³⁺, Dy³⁺) were prepared by a solid state reaction technique at high temperature. The vacuum-ultraviolet (VUV) and ultraviolet (UV) spectroscopic properties are investigated. The results indicate that Ce³⁺ ions show the lowest 5d excitation band at ∼305 nm and a broad emission band centered at ∼345 nm. Dy³⁺ ions exhibit intense absorption at VUV and UV range. White-emitting under 172 nm excitation is obtained based on two dominant emissions from Dy³⁺ ions centered at 480 and 577 nm. In addition, the energy transfer from Ce³⁺ to Dy³⁺ in the co-doped samples are observed and discussed.     

Synthesis and luminescence properties of novel LiSrPO4:Dy phosphor

Novel LiSrPO₄:Dy³⁺ phosphors for white light-emitting diodes (w-LEDs) were synthesized by the conventional solid-state reaction. X-ray powder diffraction (XRD) analysis confirmed the phase formation of LiSrPO₄:Dy³⁺ materials. Luminescence properties results showed that the phosphor could be efficiently excited by the UV–vis light region from 250 to 460 nm, and it exhibited blue (483 nm) and yellow (574 nm) emission corresponding to ⁴F_9/2 → ⁶H_15/2 transitions and ⁴F_9/2 → ⁶H₁₃/₂ transitions, respectively. The luminescence intensity of LiSrPO₄:xDy³⁺ phosphor firstly increased and then decreased with increasing Dy³⁺ concentration, and reached the maximum at x = 0.03. It was found that concentration quenching occurred as a result of dipole-dipole interaction according to the Dexter's theory. The decay time was also determined for various concentrations of Dy³⁺ in LiSrPO₄.     

Self-activated afterglow luminescence of un-doped Ca2ZrSi4O12 material and explorations of new afterglow phosphors in a rare earth element-doped Ca2ZrSi4O12 system

Un-doped Ca₂ZrSi₄O₁₂ material is prepared using a solid state reaction and it emits intense green afterglow luminescence peaking at 490 nm. The afterglow luminescence can be recorded for about 4800 s (0.32 mcd m⁻²). The thermoluminescence revealed that at least four types of traps existed in the Ca₂ZrSi₄O₁₂ material and the depths of these traps were calculated. The contributions of these traps on the afterglow luminescence were also investigated in detail. Accordingly, a possible afterglow mechanism of Ca₂ZrSi₄O₁₂ was proposed. Moreover, Ca₂ZrSi₄O₁₂ was also doped by rare earth or metal ions for developmental purpose and we arrived at some useful conclusions according to the experimental results.     

Vacuum ultraviolet excited photoluminescence properties of novel Na3Y9O3(BO3)8:Eu phosphor

The novel vacuum ultraviolet (VUV) excited Na₃Y₉O₃(BO₃)₈:Eu³⁺ red phosphor was synthesized and the photoluminescence (PL) properties were investigated. The phosphor showed strong VUV PL intensity, large quenching concentration (40 mol%) and good chromaticity (0.649, 0.351). The Eu³⁺-O²⁻ charge transition (CT) was observed to be at a higher energy (232 nm, 5.35 eV). The host absorption at 127-166 nm was broad and strong when monitoring the Eu³⁺ emission, which indicated that energy transfer from the host-lattice to the Eu³⁺ ions was efficient in Na₃Y₉O₃(BO₃)₈:Eu³⁺. These excellent VUV PL properties were revealed to be correlated with the unique isolated layer-type structure of Na₃Y₉O₃(BO₃)₈ host. The results showed that the Na₃Y₉O₃(BO₃)₈:Eu³⁺ would be a good candidate for VUV-excited red phosphor.     

Single crystalline Co3O4: Synthesis and optical properties

Crystals of Co₃O₄ have been prepared from thermal decomposition of molecular precursors derived from salicylic acid and cobalt (II) acetate or chloride at 500 °C. A cubic phase Co₃O₄ micro- and nanocrystals have been obtained. The as-synthesized products were characterized by X-ray diffraction (XRD), scanning electron microscope (SEM) and transmission electron microscope (TEM). The images of electron microscopes showed octahedral crystals of Co₃O₄. The volume and polarizability of the optimized structures of molecular precursors have been calculated and related to the particle size. The optical band gap of the obtained crystals has been measured. The results indicated two optical band gaps with values 2.65 and 2.95 eV for (E_g1) (E_g2), respectively.     

Synthesis and upconversion luminescence properties of Yb/Er codoped BaGd2(MoO4)4 powder

Synthesis and upconversion luminescence properties of the new BaGd₂(MoO₄)₄:Yb³⁺,Er³⁺ phosphor were reported in this paper. The phosphor powder was obtained by the traditional high temperature solid-state method, and its phase structure was characterized by the XRD pattern. Based on the upconversion luminescence properties studies, it is found that, under 980 nm semiconductor laser excitation, BaGd₂(MoO₄)₄:Yb³⁺,Er³⁺ phosphor exhibits intense green upconversion luminescence, which is ascribed to ²H_11/2 → ⁴I_15/2 and ⁴S_3/2 → ⁴I_15/2 transition of Er³⁺. While the observed much weaker red emission is due to the non-radiative relaxation process of ⁴S_3/2 → ⁴F_9/2 and ⁴F_9/2 → ⁴I_15/2 transition originating from the same Er³⁺. The concentration quenching effects for both Yb³⁺ and Er³⁺ were found, and the optimum doping concentrations of 0.5 mol% Yb³⁺ and 0.08 mol% Er³⁺ in the new BaGd₂(MoO₄)₄ Gd³⁺ host were established.     

Spectral analysis of RE (RE = Sm, Dy, and Tm): P2O5–Al2O3–Na2O glasses

Phosphate glasses in the compositions of 70P₂O₅–15Al₂O₃–14Na₂O–1RE³⁺ (RE = Sm, Dy, and Tm) (mol%) were prepared by melt-quenching technique and characterized optically. The differential thermal analysis (DTA) profile of the host glass was carried out to confirm its thermal stability. For all the glasses absorption, photoluminescence and decay measurements have also been carried out. These glasses have shown strong emission and absorption bands in visible and near-infrared (NIR) region. From the measured absorption spectra, Judd–Ofelt (J–O) intensity parameters (Ω₂, Ω₄ and Ω₆) have been calculated for all the studied ions. For Sm³⁺ doped glass, four emission bands centered at 562 nm (⁴G_5/2 → ⁶H_5/2), 598 nm (⁴G_5/2 → ⁶H_7/2), 644 nm (⁴G_5/2 → ⁶H_9/2), and 704 nm (⁴G_5/2 → ⁶H_11/2) have been observed with 402 nm (⁶H_5/2 → ⁴F_7/2) excitation wavelength. Of them, 598 nm (⁴G_5/2 → ⁶H_7/2) has shown a bright orange emission. With regard to Dy³⁺ doped glass, a blue emission band centered at 486 nm (⁴F_9/2 → ⁶H_15/2) and a bright yellow emission at 575 nm (⁴F_9/2 → ⁶H_13/2) have been observed, apart from 662 nm (⁴F_9/2 → ⁶H_11/2) emission transition with an excitation at 388 nm (⁶H_15/2 → ⁴I_13/2,⁴F_7/2) wavelength. Emission bands of 650 nm (¹G₄ → ³F₄) and 785 nm (¹G₄ → ³H₅) transitions for the Tm³⁺ doped glass, with an excitation wavelength at 466 nm (³H₆ → ¹G₄), have also been observed. The stimulated emission cross-sections of all the emission bands of RE³⁺ glasses (RE = Sm, Dy, and Tm) have been computed based on their measured full-width at half maximum (FWHM, Δλ) and measured lifetimes (τ_m).     

Novel blue-emitting Sr3Ga2O5Cl2:Eu phosphor for UV-pumped white LEDs

A novel blue-emitting Sr₃Ga₂O₅Cl₂:Eu²⁺ phosphor has been synthesized by a two-step solid-state reaction. The luminescence properties have been investigated by photoluminescence (PL) spectra, and temperature-dependent PL spectra. It shows an efficient broad absorption band around 400 nm, which matches well with the commercial near-ultraviolet light-emitting chips, and an efficient blue emission. It shows a higher thermal quenching temperature than that of Sr₃Al₂O₅Cl₂:Eu²⁺ phosphor. Sr₃Ga₂O₅Cl₂:Eu²⁺ phosphor is a promising blue-emitting component for UV chip excited white light-emitting-diodes.     

Visible quantum cutting via downconversion in a novel green-emitting K2Gd(WO4)(PO4):Tb phosphor

A novel phosphor K₂Gd(WO₄)(PO₄):Tb was prepared via a solid-state reaction. The crystal structure of K₂Gd(WO₄)(PO₄) as a new host matrix for luminescence was defined to be the orthorhombic system with space group Ibca (73). Visible quantum cutting under Tb³⁺ 4f⁸–4f⁷5d¹ excitation and host excitation in K₂Gd(WO₄)(PO₄):Tb³⁺ via a downconversion was identified. In order to rationalize the quantum cutting effect, the proper mechanism was proposed. According to calculations, the quantum efficiency was up to 183.2% and 176.4% under excitation at 235 nm and 150 nm, respectively. When compared with Zn₂SiO₄:Mn²⁺ (P1-G1S), KGWP:0.5Tb³⁺ is slightly less bright over 450–650 nm but has a shorter decay time.     

Luminescent properties of long lasting phosphor Ca2MgSi2O7:Eu

Long afterglow phosphors (Ca_1−xEu_x)₂MgSi₂O₇ (0.002 ≤ x ≤ 0.02) were prepared by solid-state reactions under a weak reductive atmosphere. X-ray diffraction pattern, photoluminescence spectra, decay curve, afterglow spectra and thermoluminescence curves were investigated. The phosphors showed two emission peaks when they were excited by 343 nm, due to two types of Eu²⁺ centers existing in the Ca₂MgSi₂O₇ lattice. However, only one emission peak can be found in their afterglow spectra. Energy transfer between Eu²⁺ ions in inequivalent sites was found. A possible mechanism was presented and discussed. The afterglow decay time of Ca_1.998MgSi₂O₇:Eu_0.002 was nearly 12.5 h which means it was a good long lasting phosphor.     

Investigation of Na3GdP2O8:Tb as a potential green-emitting phosphor for plasma display panels

The photoluminescent properties of a series of Tb³⁺-doped Na₃GdP₂O₈ phosphors excitable by vacuum ultraviolet and ultraviolet light are reported. The host related absorption, f-f and f-d transitions of Gd³⁺ and Tb³⁺, and charge transfer of O²⁻ → Gd³⁺ and O²⁻ → Tb³⁺ are assigned. Under 147 nm light excitation, Na₃GdP₂O₈:Tb³⁺ phosphors show efficient green emissions with a dominant peak at 545 nm. The optimal sample Na₃Gd_0.4Tb_0.6P₂O₈ shows a shorter decay time and a comparable brightness when compared with the commercial Zn₂SiO₄:Mn²⁺ green phosphor. These results demonstrate that it is a potential candidate for plasma display panels application.     

Luminescent properties of Sr2P2O7:Eu,Mn phosphor under near UV excitation

The phosphors in the system Sr_2−x−yP₂O₇:xEu²⁺,yMn²⁺ were synthesized by solid-state reactions and their photoluminescence properties were investigated. These phosphors have strong absorption in the near UV region, which is suitable for excitation of ultraviolet light emitting diodes (UVLEDs). The orange-reddish emission of Mn²⁺ in these phosphors can be used as a red component in the tri-color system and may be enhanced by adjusting the Mn²⁺/Eu²⁺ ratio. The energy transfer from Eu²⁺ to Mn²⁺ is observed with a transfer efficiency of ∼0.45 and a critical distance of ∼10 Å. The results reveal that Sr_2−x−yP₂O₇:xEu²⁺,yMn²⁺ phosphors could be used in white light UVLEDs.     

Photoluminescence and low-voltage cathodoluminescence characteristics of blue phosphor, ZnGa2O4:M (M = Na, Ag)

Photoluminescence and low-voltage cathodoluminescence characteristics of ZnGa₂O₄ phosphor doped with monovalent ions has been studied. Monovalent ions such as Na⁺ and Ag⁺ are incorporated into ZnGa₂O₄ lattices in order to increase the concentration of oxygen vacancies in the spinel lattice. By doping low concentrations of monovalent ions (Na⁺, Ag⁺) into ZnGa₂O₄, the self-activated blue luminescence originated from oxygen vacancies is enhanced. Also, the blue luminescence intensity is enhanced more along with a good color purity by annealing ZnGa₂O₄:Na⁺ in a reducing atmosphere, which is due to increasing the concentration of oxygen vacancies even more. The luminescence band at the UV region (λ_max=360 nm) does not become the major luminescence band by introducing Na⁺ ion into the ZnGa₂O₄ lattice, while the UV luminescence band becomes the major one by annealing the undoped ZnGa₂O₄ in a reducing atmosphere.     

Thermal annealing effect on Y2O3:Eu phosphor films prepared by yttrium 2-methoxyethoxide sol–gel precursor

In this work, we demonstrate that yttrium 2-methoxyethoxide is a convenient sol–gel precursor to synthesize the Y₂O₃:Eu³⁺ phosphor films. The crystallization of Y₂O₃:Eu³⁺ phosphor films prepared from the yttrium 2-methoxyethoxide occurs at about 550 °C. We have also observed that our Y₂O₃:Eu³⁺ phosphor films undergo crystal structure change above annealing temperature of 750 °C which is not previously observed in the sol–gel fabrication method. The change of photoluminescent (PL) spectra is related to the evolution of Y₂O₃ crystal structure. It is shown in this investigation that the post-annealing treatment will help to produce phosphor films of improved brightness. The reasons assigned are the effective elimination of OH impurities and the grain growth of phosphor films.     

Synthesis and the luminescent properties of europium-activated Ca2SnO4 phosphors

The synthesis and photoluminescent (PL) properties of calcium stannate crystals doped with europium grown by mechanically activated in a high energy vibro-mill have been investigated. The characteristics of Ca₂SnO₄:Eu³⁺ phosphors were found to depend on the amounts of europium ions. The XRD profiles revealed that the system, (Ca_1−xEu_x)₂SnO₄, could form stable solid solutions in the composition range of x = 0–7% after being calcined at 1200 °C. The calcined powders emit bright red luminescence centered at 618 nm due to ⁵D₀ → ⁷F₂ electric dipole transition. Both XRD data and the emission ratio of (⁵D₀ → ⁷F₂)/(⁵D₀ → ⁷F₁) reveal that the site symmetry of Eu³⁺ ions decreases with increasing doping concentration. The maximum PL intensity has been obtained for 7 mol% concentration of Eu³⁺ in Ca₂SnO₄.     

MgAl2O4:Mg荧光粉的合成及其发光性能

用超声辅助聚丙烯酰胺凝胶法合成了MgAl₂O₄:Mg荧光粉。在MgAl₂O₄体系中引入的Mg金属颗粒抑制了MgAl₂O₄相的形成,在900℃及以上的温度烧结MgAl₂O₄:Mg干凝胶粉末,镁颗粒氧化成MgO。Mg金属颗粒的引入使MgAl₂O₄:Mg荧光粉的形貌由细小的纳米颗粒变为方便面型;MgAl₂O₄:Mg荧光粉的颜色由在600℃烧结时的暗棕色变为在800℃烧结时的白色,在1000℃烧结时白色变暗。随着烧结温度的提高MgAl₂O₄:Mg荧光粉的能带先增大后略微减小。引入镁颗粒使荧光光谱中位于395和425 nm的两个荧光峰淬灭,在650、656和680 nm出现三个新的荧光发射峰,且随着烧结温度的提高发光强度减弱。金属颗粒的表面等离子体共振导致MgAl₂O₄主晶格荧光淬灭,缺陷能级使MgAl₂O₄:Mg荧光粉产生了新的荧光发射峰。     

White-light long-lasting phosphor Sr2SiO4:Pr

A white-emitting phosphor Sr₂SiO₄: Pr³⁺ was synthesized through a solid-state reaction, and characterized by XRD, scanning electron microscopy (SEM), fluorescence spectrophotometer and thermo luminescence (TL) meter. Its emission spectra is composed of bluish purple (peaking at 390 nm), green (peaking at 535 nm) and red (peaking at 604 nm) light emission. They originate from the transitions of 4f → 5d, ³P₀ → ³H₅ and ¹D₂ → ³H₄ of Pr³⁺. The afterglow emission spectrum is similar to the emission spectra. And the afterglow can last over 40 min in darkness. The TL curve shows that there is only one thermo luminescence band peak at about 376.480 K, which is responsible for the long-lasting emission.