Performance analysis of a novel solar PTC integrated system for multi-generation with hydrogen production

The performance analysis of a novel multi-generation (MG) system that is developed for electricity, cooling, hot water and hydrogen production is presented in this study. MG systems in literature are predominantly built on a gas cycle, integrated with other thermodynamic cycles. The aim of this study is to achieve better thermodynamic (energy and exergy) performance using a MG system (without a gas cycle) that produces hydrogen. A proton exchange membrane (PEM) utilizes some of the electricity generated by the MG system to produce hydrogen. Two Rankine cycles with regeneration and reheat principles are used in the MG configuration. Double effect and single effect absorption cycles are also used to produce cooling. The electricity, hot water, cooling effect, and hydrogen production from the multi-generation are 1027 kW, 188.5 kW, 11.23 kg/s and 0.9785 kg/h respectively. An overall energy and exergy efficiency of 71.6% and 24.5% respectively is achieved considering the solar parabolic trough collector (PTC) input and this can increase to 93.3% and 31.9% if the input source is 100% efficient. The greenhouse gas emission reduction of this MG system is also analyzed.     

Recent advances in artificial neural network research for modeling hydrogen production processes

Artificial Neural Networks (ANN) have been widely used by scientists in a variety of energy modes (biomass, wind, solar, geothermal, and hydroelectric). This review highlights the assistance of ANN for researchers in the quest for discovering more advanced materials/processes for efficient hydrogen production (HP). The review is divided into two parts in this context. The first section briefly mentions, in terms of technologies, economy, energy consumption, and costs symmetrically outlined the advantages and disadvantages of various HP routes such as fossil fuel/biomass conversion, water electrolysis, microbial fermentation, and photocatalysis. Subsequently, ANN and ANN hybrid studies implemented in HP research were evaluated. Finally, statistics of hybrid studies with ANN are given, and future research proposals and hot research topics are briefly discussed. This research, which touches upon the types of ANNs applied to HP methods and their comparison with other modeling techniques, has an essential place in its field.     

A novel approach to ammonia synthesis from hydrogen sulfide

There are a number of shortcomings for currently-available technologies for ammonia production, such as carbon dioxide emissions and water consumption. We simulate a novel model for ammonia production from hydrogen sulfide through membrane technologies. The proposed production process decreases the need for external water and reduces the physical footprint of the plant. The required hydrogen comes from the separation of hydrogen sulfide by electrochemical membrane separation, while the required nitrogen is obtained from separating oxygen from air through an ion transport membrane. 10% of the hydrogen from the electrochemical membrane separation along with the separated oxygen from the ion transport membrane is sent to the solid oxide fuel cell for heat and power generation. This production process operates with a minimal number of processing units and in physical, kinetic, and thermal conditions in which a separation factor of ~99.99% can be attained.     

Performance evaluation of a solarized gas turbine system integrated to a high temperature electrolyzer for hydrogen production

In this paper, the performance of a solar gas turbine (SGT) system integrated to a high temperature electrolyzer (HTE) to generate hybrid electrical power and hydrogen fuel is analyzed. The idea behind this design is to mitigate the losses in the electrical power transmission and use the enthalpy of exhaust gases released from the gas turbine (GT) to make steam for the HTE. In this context, a GT system is coupled with a solar tower including heliostat solar field and central receiver to generate electrical power. To make steam for the HTE, a flameless boiler is integrated to the SGT system applying the SGT extremely high temperature exhaust gases as the oxidizer. The results indicate that by increasing the solar receiver outlet temperature from 800 K to 1300 K, the solar share increases from 22.1% to 42.38% and the overall fuel consumption of the plant reduces from 7 kg/s to 2.7 kg/s. Furthermore, flameless mode is achievable in the boiler while the turbine inlet temperature (TIT) is maintained at the temperatures higher than 1314 K. Using constant amounts of the SGT electrical power, the HTE voltage decreases by enhancing the HTE steam temperature which result in the augmentation of the overall hydrogen production. To increase the HTE steam temperature from 950 K to 1350 K, the rate of fuel consumption in the flameless boiler increases from 0.1 m/s to 0.8 m/s; however, since the HTE hydrogen production increases from 4.24 mol/s to 16 mol/s it can be interpreted that the higher steam temperatures would be affordable. The presented hybrid system in this paper can be employed to perform more thermochemical analyses to achieve insightful understanding of the hybrid electrical power-hydrogen production systems.     

Design and computational analysis of a metal hydride hydrogen storage system with hexagonal honeycomb based heat transfer enhancements-part A

In this study, design and performance analysis is carried out for a 10 kWh metal hydride based hydrogen storage system. The system is equipped with distinctive aluminium hexagonal honeycomb based heat transfer enhancements (HTE) having higher surface area to volume ratio for effective heat transfer combined with low system weight addition. The system performance was studied under different operating conditions. The optimum absorption condition was achieved at 35 bar with water at room temperature as heat transfer fluid where up to 90% absorption was completed in 7200 s. The performance of the reactor was observed to significantly improve upon the addition of the HTE network at a minimal system weight penalty.     

Economic viability assessment of sustainable hydrogen production,storage, and utilisation technologies integrated into on- and off-grid micro-grids: A performance comparison of different meta-heuristics

In recent years, there has been considerable interest in the development of zero-emissions, sustainable energy systems utilising the potential of hydrogen energy technologies. However, the improper long-term economic assessment of costs and consequences of such hydrogen-based renewable energy systems has hindered the transition to the so-called hydrogen economy in many cases. One of the main reasons for this is the inefficiency of the optimization techniques employed to estimate the whole-life costs of such systems. Owing to the highly nonlinear and non-convex nature of the life-cycle cost optimization problems of sustainable energy systems using hydrogen as an energy carrier, meta-heuristic optimization techniques must be utilised to solve them. To this end, using a specifically developed artificial intelligence-based micro-grid capacity planning method, this paper examines the performances of twenty meta-heuristics in solving the optimal design problems of three conceptualised hydrogen-based micro-grids, as test-case systems. Accordingly, the obtained numeric simulation results using MATLAB indicate that some of the newly introduced meta-heuristics can play a key role in facilitating the successful, cost-effective development and implementation of hydrogen supply chain models. Notably, the moth-flame optimization algorithm is found capable of reducing the life-cycle costs of micro-grids by up to 6.5% as compared to the dragonfly algorithm.     

Design of a sustainable and reliable hydrogen supply chain network under mixed uncertainties: A case study

In the recent decade, the design of green hydrogen supply chains has been highlighted by researchers. Although, nowadays, responsiveness and social responsibility of networks could also be regarded as important measures that could attract more consumers to use hydrogen. Accordingly, this paper aims to improve the reliability and social responsibility of a hydrogen supply chain along with its economic and environmental aspects. To ensure the network's responsiveness, a new objective function is extended that maximizes the reliability of products' delivery. Also, a novel reliability approach is developed to immune the network against disruptions. As a new sustainability indicator, social factors are considered in the design of the hydrogen supply chain. Finally, a mixed possibilistic flexible programming method is proposed to assure the outputs' reliability. The results illustrate that by 28.4% enhancement in cost objective, the value of environmental, social, and reliability objectives are desirably improved 39.2%, 45.6%, and 24.1%, respectively.     

Hydrofluoroolefin-based mixed refrigerant for enhanced performance of hydrogen liquefaction process

Hydrogen has the highest gravimetric energy density of all fuels; however, it has a low volumetric energy density, unfavorable for storage and transportation. Hydrogen is usually liquefied to meet the bulk transportation needs. The exothermic interconversion of its spin isomers is an additional activity to an already energy-intensive process. The most significant temperature drop occurs in the precooling cycle (between ?150 °C and up to ?180 °C) and consumes more than 50% of the required energy. To reduce the energy consumption and improve the exergy efficiency of the hydrogen liquefaction process, a new high-boiling component, Hydrofluoroolefin (HFO-1234yf), is added to the precooled mixed refrigerant. As a result, the specific energy consumption of precooling cycle reduces by 41.8%, from 10.15 kWh/kg_LH2 to 5.90 kWh/kg_LH2, for the overall process. The exergy efficiency of the proposed case increases by 43.7%; however, the total equipment cost is also the highest. The inflated cost is primarily due to the added ortho-to-para hydrogen conversion reactor, boosting the para-hydrogen concentration. From the perspective of bulk storage and transportation of liquid hydrogen, the simplicity of design and low energy consumption build a convincing case for considering the commercialization of the process.     

Transition metal/carbon nanoparticle composite catalysts as platinum substitutes for bioelectrochemical hydrogen production using microbial electrolysis cells

Various metal nanoparticle catalysts supported on Vulcan XC-72 and carbon-nanomaterial-based catalysts were fabricated and compared and assessed as substitutes of platinum in microbial electrolysis cells (MECs). The metal-nanoparticle-loaded cathodes exhibited relatively better hydrogen production and electrochemical properties than cathodes coated with carbon nanoparticles (CNPs) and carbon nanotubes (CNTs) did. Catalysts containing Pt (alone or mixed with other metals) most effectively produced hydrogen in terms of overall conversion efficiency, followed by Ni alone or combined with other metals in the order: Pt/C (80.6%) > PtNi/C (76.8%) > PtCu/C (72.6%) > Ni/C (73.0%) > Cu/C (65.8%) > CNPs (47.0%) > CNTs (38.9%) > plain carbon felt (38.7%). Further, in terms of long-term catalytic stability, Ni-based catalysts degraded to a lesser extent over time than did the Cu/C catalyst (which showed the maximum degradation). Overall, the hydrogen generation efficiency, catalyst stability, and current density of the Ni-based catalysts were almost comparable to those of Pt catalysts. Thus, Ni is an effective and inexpensive alternative to Pt catalysts for hydrogen production by MECs.     

Dark fermentative biohydrogen production using pretreated Scenedesmus obliquus biomass under an integrated paradigm of biorefinery

In recent times, biohydrogen production from microalgal feedstock has garnered considerable research interests to sustainably replace the fossil fuels. The present work adapted an integrated approach of utilizing deoiled Scenedesmus obliquus biomass as feedstock for biohydrogen production and valorization of dark fermentation (DF) effluent via biomethanation. The microalgae was cultivated under different CO₂ concentration. CO₂-air sparging of 5% v/v supported maximum microalgal growth and carbohydrate production with CO₂ fixation ability of 727.7 mg L^?1 d^?1. Thereafter, lipid present in microalgae was extracted for biodiesel production and the deoiled microalgal biomass (DMB) was subjected to different pretreatment techniques to maximize the carbohydrate recovery and biohydrogen yield. Steam heating (121 °C) in coherence with H₂SO₄ (0.5 N) documented highest carbohydrate recovery of 87.5%. DF of acid-thermal pretreated DMB resulted in maximum H₂ yield of 97.6 mL g^?1 VS which was almost 10 times higher as compared to untreated DMB (9.8 mL g^?1 VS). Subsequent utilization of DF effluent in biomethanation process resulted in cumulative methane production of 1060 mL L^?1. The total substrate energy recovered from integrated biofuel production system was 30%. The present study envisages a microalgal biorefinery to produce biohydrogen via DF coupled with concomitant CO₂ sequestration.     

Study on performance comparison of different fin combinations of catalyst filled plate fin heat exchanger for hydrogen liquefaction

A mathematical model of catalyst filled plate fin heat exchanger (CFPFHE) is established to compare different fin models and analyze fin performance of different fin combinations. The results show that the single-layer fin model inadequately reflects the double-layers fin model from flow distribution and fin performance. The indexes of ortho-para hydrogen conversion (YY_pH2) of different fin combinations are all about 0.95, meeting the requirement of the CFPFHE. The plain_serrated fin has the best fin performance among four fin combinations. Compared with the plain_plain, the Colburn heat transfer factor (j factor) and thermal enhancement factor (TEF) of cool and hot sides of the plain_serrated fin are increased by 68.0～51.0% and 28.5～13.6%, 8.5～6.1% and 8.4%～6.1% at Re_hot = 500～1500, respectively. Further, the fin combinations of high-efficiency fin and plain respectively used in cool and hot sides have excellent overall fin performance, which provides a theoretical guidance for fin selection of the CFPFHE.     

Significance of ortho-para hydrogen conversion in the performance of hydrogen liquefaction process

Hydrogen is an energy vector and is produced just like electricity. In order to overcome the shortcomings associated with its low molecular weight and energy density per unit volume, hydrogen is liquefied for storage and transportation purposes. The liquefaction of hydrogen differs from that of other substances as it involves the reactive transformation of its isomeric states. At 25 °C, molecular hydrogen consists of 75% orthohydrogen and 25% of parahydrogen. As the normal boiling point, hydrogen essentially exists in the para-state, which is preferred because of its lower boil-off gas rate. However, the conversion of ortho-to-para hydrogen is an exothermic reaction, and this enthalpy of conversion enhances the total reversible work by about 15%. Little work has been done regarding ortho-to-para hydrogen conversion from the process systems point of view. Therefore, parametric analysis of this vital conversion reaction was studied with potential impact on the performance of cryogenic heat exchangers, reactors configuration and mode of operation, and probable impact on the energy efficiency of the liquefaction process. An alternate approach to simulate the reaction is also proposed. The results show that the current approaches to process design need to be changed. The study opens avenues for more in-depth analysis and optimization approaches to present a holistic framework for future integrated energy systems.     

Time-phased geospatial siting analysis for renewable hydrogen production facilities under a billion-kilogram-scale build-out using California as an example

For renewable hydrogen to be a significant part of the future decarbonized energy and transportation sectors, a rapid and massive build-out of hydrogen production facilities will be needed. This paper describes a geospatial modeling approach to identifying the optimal locations for renewable hydrogen fuel production throughout the state of California, based on least-cost generation and transport. This is accomplished by (1) estimating and projecting California renewable hydrogen demand scenarios through the year 2050, (2) identifying feedstock locations, (3) excluding areas not suitable for development, and (4) selecting optimal site locations using commercial geospatial modeling software. The findings indicate that there is a need for hundreds of new renewable hydrogen production facilities in the decades preceding the year 2050. In selecting sites for development, feedstock availability by technology type is the driving factor.     

Transient performances of the gas turbine recuperating waste heat through hydrogen rich fuels

Operational rules and control strategies of the chemically recuperated gas turbine (CRGT) in the marine propulsion are investigated in this paper. The Minimization of Gibbs free energy method is used to calculate the diesel-steam reforming reaction which products synthetic hydrogen rich fuels, and a universal model of the chemical regenerator which is easily applied to different application environments is created. The hydrogen production and hydrogen molar fraction are investigated to verify that the CRGT improve the combustion performances under low working conditions. Off-design calculations are performed to derive proper operational rules, and transient calculations are performed to investigate the best control strategies for the systems. The modelling approach of the chemical regenerator can be generally used in the chemically recuperated gas turbine. The elaborate operational rules can greatly improve the thermal efficiencies under every working condition. The system using synchronous control strategies have better regulation speed and operation stability than that using asynchronous control strategies.     

Effect of ZrO2 on the performance of Co–CeO2 catalysts for hydrogen production from waste-derived synthesis gas using high-temperature water gas shift reaction

In this study, highly active and stable CeO₂, ZrO₂, and Zr_(1-x)Ce_(x)O₂-supported Co catalysts were prepared using the co-precipitation method for the high-temperature water gas shift reaction to produce hydrogen from waste-derived synthesis gas. The physicochemical properties of the catalysts were investigated by carrying out Brunauer-Emmet-Teller, X-ray diffraction, CO-chemisorption, Raman spectroscopy, transmission electron microscopy, X-ray photoelectron spectroscopy, and H₂-temperature-programmed reduction measurements. With an increase in the ZrO₂ content, the surface area and reducibility of the catalysts increased, while the interaction between Co and the support and the dispersion of Co deteriorated. The Co–Zr_0.4Ce_0·6O₂ and Co–Zr_0.6Ce_0·4O₂ catalysts showed higher oxygen storage capacity than that of the others because of the distortion of the CeO₂ structure due to the substitution of Ce⁴⁺ by Zr⁴⁺. The Co–Zr_0.6Ce_0·4O₂ catalyst with high reducibility and oxygen storage capacity exhibited the best catalytic performance and stability among all the catalysts investigated in this study.     

Economic valuation of green hydrogen charging compared to gray hydrogen charging: The case of South Korea

The South Korean government promotes hydrogen-powered vehicles to reduce greenhouse gas (GHG) emissions but these vehicles use gray hydrogen while charging, which causes GHG emissions. Therefore, converting this fuel into green hydrogen is necessary to help reduce GHG emissions, which will incur investment costs of approximately USD 20 billion over a decade. In this study, a contingent valuation method is applied in an analysis to examine the extent to which consumers are willing to pay for green hydrogen charging compared to gray hydrogen charging. The results indicate that the monthly mean of willingness to pay per driver is 51,674 KRW (USD 45.85), equivalent to 4302 KRW per kg (USD 3.82). Additionally, consumers accept a 28.5% increase in the monthly average fuel expenses when converting to green hydrogen. These findings can be used in the development of pricing and energy use plans to finance the expansion of green hydrogen infrastructure.     

A strategy of mid-temperature natural gas based chemical looping reforming for hydrogen production

Steam methane reforming (SMR) needs the reaction heat at a temperature above 800 °C provided by the combustion of natural gas and suffers from adverse environmental impact and the hydrogen separated from other chemicals needs extra energy penalty. In order to avoid the expensive cost and high power consumption caused by capturing CO₂ after combustion in SMR, natural gas Chemical Looping Reforming (CLR) is proposed, where the chemical looping combustion of metal oxides replaced the direct combustion of NG to convert natural gas to hydrogen and carbon dioxide. Although CO₂ can be separated with less energy penalty when combustion, CLR still require higher temperature heat for the hydrogen production and cause the poor sintering of oxygen carriers (OC). Here, we report a high-rate hydrogen production and low-energy penalty of strategy by natural gas chemical-looping process with both metallic oxide reduction and metal oxidation coupled with steam. Fe₃O₄ is employed as an oxygen carrier. Different from the common chemical looping reforming, the double side reactions of both the reduction and oxidization enable to provide the hydrogen in the range of 500–600 °C under the atmospheric pressure. Furthermore, the CO₂ is absorbed and captured with reduction reaction simultaneously.Through the thermodynamic analysis and irreversibility analysis of hydrogen production by natural gas via chemical looping reforming at atmospheric pressure, we provide a possibility of hydrogen production from methane at moderate temperature. The reported results in this paper should be viewed as optimistic due to several idealized assumptions: Considering that the chemical looping reaction is carried out at the equilibrium temperature of 500 °C, and complete CO₂ capture can be achieved. It is assumed that the unreacted methane and hydrogen are completely separated by physical adsorption. This paper may have the potential of saving the natural gas consumption required to produce 1 m³ H₂ and reducing the cost of hydrogen production.     

Renewable-powered hydrogen economy from Australia's perspective

This article broadly reviews the state-of-the-art technologies for hydrogen production routes, and methods of renewable integration. It outlines the main techno-economic enabler factors for Australia to transform and lead the regional energy market. Two main categories for competitive and commercial-scale hydrogen production routes in Australia are identified: 1) electrolysis powered by renewable, and 2) fossil fuel cracking via steam methane reforming (SMR) or coal gasification which must be coupled with carbon capture and sequestration (CCS). It is reported that Australia is able to competitively lower the levelized cost of hydrogen (LCOH) to a record $(1.88–2.30)/kg_H2 for SMR technologies, and $(2.02–2.47)/kg_H2 for black-coal gasification technologies. Comparatively, the LCOH via electrolysis technologies is in the range of $(4.78–5.84)/kg_H2 for the alkaline electrolysis (AE) and $(6.08–7.43)/kg_H2 for the proton exchange membrane (PEM) counterparts. Nevertheless, hydrogen production must be linked to the right infrastructure in transport-storage-conversion to demonstrate appealing business models.     

Development of a hydrogen impurity analyzer based on mobile-gas chromatography for online hydrogen fuel monitoring

Hydrogen is an excellent alternative energy source, particularly for vehicles. Despite the expansion of a considerable number of infrastructures, such as hydrogen refueling stations, there is a lack of efficient inspection methods for monitoring the hydrogen fuel quality. In this study, a hydrogen impurity analyzer (HIA) based on mobile gas chromatography with a thermal conductivity detector is developed and evaluated for the quality assurance of hydrogen fuel. Accordingly, O₂, N₂, and Ar which help in monitoring air leaks at hydrogen refueling stations, and CH₄, which can also be detected by HIA, are selected as target impurities. The HIA reached limits of detection of 2.93, 0.72, 0.84, and 1.54 μmol/mol for O₂, Ar, N₂, and CH₄, respectively. Moreover, the ISO 14687 requirements are satisfied with respective HIA expanded uncertainties of 2.6, 8.7, 8.2, and 9.4% (coverage factor k = 2). The developed system is ISO-compliant and offers enhanced mobility for online inspections.     

Refueling-station costs for metal hydride storage tanks on board hydrogen fuel cell vehicles

Refueling costs account for much of the fuel cost for light-duty hydrogen fuel-cell electric vehicles. We estimate cost savings for hydrogen dispensing if metal hydride (MH) storage tanks are used on board instead of 700-bar tanks. We consider a low-temperature, low-enthalpy scenario and a high-temperature, high-enthalpy scenario to bracket the design space. The refueling costs are insensitive to most uncertainties. Uncertainties associated with the cooling duty, coolant pump pressure, heat exchanger (HX) fan, and HX operating time have little effect on cost. The largest sensitivities are to tank pressure and station labor. The cost of a full-service attendant, if the refueling interconnect were to prevent self-service, is the single largest cost uncertainty. MH scenarios achieve $0.71–$0.75/kg-H₂ savings by reducing compressor costs without incurring the cryogenics costs associated with cold-storage alternatives. Practical refueling station considerations are likely to affect the choice of the MH and tank design.