Quasi-cube ZnFe2O4 nanocrystals: Hydrothermal synthesis and photocatalytic activity with TiO2 (Degussa P25) as nanocomposite

The fabrication and photocatalytic application of zinc ferrite nanocrystals were reported. Quasi-cube ZnFe₂O₄ nanocrystals with typical small sizes of 5-15 nm were successfully synthesized by a facile hydrothermal approach. ZnFe₂O₄/P25 nanocomposite was prepared by physically grinding the ZnFe₂O₄ nanocrystals with TiO₂ (commercial Degussa P25) at ambient temperature, and it exhibited excellent photocatalytic activity for the mineralization of Rhodamine B. UV-vis measurement and photocatalytic test results showed that ZnFe₂O₄ nanocrystals exhibited effective band-gap coupling to P25 nanopowders by simply physical grinding without any surface modification or high-energy balling, which is usually adopted in conventional mixture process. This phenomenon can be attributed to the high surface activities of the as-obtained tiny ZnFe₂O₄ nanocrystals and commercial P25 nanoparticles. It may imply that the mixing process of composite materials would be simplified by further lowering the grain sizes of their component particles.     

Photocatalytic decomposition of methylene blue on nanocrystalline titania prepared by different methods

Nanocrystalline particles of pure anatase titania were prepared by two different methods. One is the sol-gel method at ambient temperature using ultrasonication (TiO₂-SG-US) and conventional stirring method (TiO₂-SG-S) and the other by surfactant assisted hydrothermal synthesis (TiO₂-HT). More uniform distribution/dispersion of the nanoparticles (SEM), marginally higher surface area, better thermal stability and phase purity are some of the advantages of preparation of nanocrystalline titania by sol gel ultrasonication method and hydrothermal synthesis method. The behavior of anatase titania in photocatalytic decomposition of methylene blue in aqueous medium was studied as a function of the method of preparation and the crystallite size. The nanoparticles prepared by ultrasonication method were more effective than both, the sample prepared by conventional stirring method and commercial Degussa P-25. The higher photocatalytic activity of TiO₂-SG-US is attributed to the more uniform size of the particles as compared to TiO₂-SG-S samples. Both TEM and XRD data on TiO₂-HT samples reveal a uniform and nanocrystalline TiO₂ particles, which showed photocatalytic activity in both UV and visible region although brookite phase was also present.     

Structure and photocatalytic activity studies of TiO2-supported over Ce-modified Al-MCM-41

Ce-Al-MCM-41, TiO₂/Al-MCM-41 and TiO₂/Ce-Al-MCM-41 materials with varying contents of Ce (by impregnation) and TiO₂ loaded (by solid-state dispersion) on Al-MCM-41 support are prepared. The Ce modified and TiO₂ loaded composite systems are characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), UV-vis diffuse reflectance spectra (DRS) and X-ray photoelectron spectroscopy (XPS) techniques. The DRS and XPS of low Ce content (0.2-0.5 wt.%) modified Al-MCM-41 samples are showing more characteristic of Ce³⁺ species wherein cerium in interaction with Al-MCM-41 and that of high Ce (0.8, 3.0 wt.%) content modified samples are showing the characteristic of both Ce⁴⁺and Ce³⁺species. A series of Ce-modified Al-MCM-41 and TiO₂ loaded composite catalysts are evaluated for photocatalytic degradation of phenol under UV irradiation. Low Ce content in Ce³⁺ state on Al-MCM-41 is showing good photoactivity in comparison with high Ce content samples and pure ceria. The composite TiO₂/Ce-Al-MCM-41 is showing enhanced degradation activity due decreased rate of electron-hole recombination on TiO₂ surface by the redox properties of cerium. The photocatalyst TiO₂/Ce-Al-MCM-41 with an optimum of 10 wt.% TiO₂ and 0.3 wt.% Ce is showing maximum phenol degradation activity. The possible mechanism of phenol degradation on the composite photocatalyst is proposed.     

The microwave effect on the properties of silica-coated TiO2 fine particles prepared using sol-gel method

The silica coating of TiO₂ fine particle was conducted using microwave assisted sol-gel method and conventional sol-gel method to suppress its photo-catalytic activity. The amount and uniformity of silica coating on TiO₂ surface were characterized by X-ray photoelectron spectroscopy (XPS), X-ray fluorescence spectroscopy (XRF), infrared spectroscopy (IR), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and zeta potential measurements. XPS and XRF results showed that the presence of catalyst and reaction time were important factors to reach high silica amounts. SEM, TEM, and zeta potential results indicated that dense film coating of SiO₂ layer formed on TiO₂ surface in conventional sol-gel method, whereas the nucleation coating was observed on sample prepared by microwave assisted sol-gel method. When photo-catalytic activities and ultraviolet (UV) shielding abilities of these samples were evaluated, the sample prepared by microwave processing showed higher inhibition of photo-catalytic activity and better UV shielding ability than the sample prepared by conventional method. These results suggested that the coating method significantly affected the photo-catalytic activity and UV shielding ability of coated TiO₂.     

Hydrothermal synthesis, characterization, photocatalytic activity and dye-sensitized solar cell performance of mesoporous anatase TiO2 nanopowders

Mesoporous anatase TiO₂ nanopowder was synthesized by hydrothermal method at 130 °C for 12 h. The samples were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), selected-area electron diffraction (SAED), HRTEM, and Brunauer-Emmett-Teller (BET) surface area. The as-synthesized sample with narrow pore size distribution had average pore diameter about 3-4 nm. The specific BET surface area of the as-synthesized sample was about 193 m²/g. Mesoporous anatase TiO₂ nanopowders (prepared by this study) showed higher photocatalytic activity than the nanorods TiO₂, nanofibers TiO₂ mesoporous TiO₂, and commercial TiO₂ nanoparticles (P-25, JRC-01, and JRC-03). The solar energy conversion efficiency (η) of the cell using the mesoporous anatase TiO₂ was about 6.30% with the short-circuit current density (Jsc) of 13.28 mA/cm², the open-circuit voltage (Voc) of 0.702 V and the fill factor (ff) of 0.676; while η of the cell using P-25 reached 5.82% with Jsc of 12.74 mA/cm², Voc of 0.704 V and ff of 0.649.     

Fabrication and photocatalytic activity of porous TiO2 nanowire microspheres by surfactant-mediated spray drying process

A novel, porous TiO₂ nanowire microsphere with a diameter of 3-8 μm was successfully fabricated via spray drying of TiO₂ nanowire suspension with the assistance of surfactant (F127). The products were characterized by FESEM, XRD and N₂ adsorption-desorption analysis and results revealed that the resulting TiO₂ nanowire microspheres possessed a hierarchically macro/mesoporous structure, as well as a high BET surface area of 38.2 m²/g. Systematic studies showed that the presence of surfactant in the suspension feed for spray drying was critical in the formation of porous microspheres. The structure of the fabricated microspheres depends on the nanowire concentration in the feed. The TiO₂ nanowire microspheres exhibited significant photocatalytic degradation of Methylene blue (MB) as compared to commercial TiO₂ nanoparticles (P25). It was also revealed that the microspheres have excellent stability on photocatalytic activity and mechanical strength, which are both crucial factors when considering reuse of these photocatalysts.     

Preparation and characterization of ZnO-TiO2 nanocomposite for photocatalytic disinfection of bacteria and detoxification of cyanide under visible light

ZnO-TiO₂ nanocomposite was prepared by modified ammonia-evaporation-induced synthetic method. It was characterized by powder X-ray diffraction, transmission electron microscopy, selected area electron diffraction, and energy dispersive X-ray, UV-visible diffuse reflectance, photoluminescence and electrochemical impedance spectroscopies. Incorporation of ZnO leads to visible light absorption, larger charge transfer resistance and lower capacitance. The nanocomposite effectively catalyzes the inactivation of E. coli under visible light. Further, the prepared nanocomposite displays selective photocatalysis. While its photocatalytic efficiency to detoxify cyanide with visible light is higher than that of TiO₂ P25, its efficiency to degrade methylene blue, sunset yellow and rhodamine B dyes under UV-A light is less than that of TiO₂ P25.     

TiO2-MWCNT rice grain-shaped nanocomposites—Synthesis, characterization and photocatalysis

Titanium dioxide (TiO₂)-multiwalled carbon nanotube (MWCNT) nanocomposites with a novel morphology of rice-grains are prepared by electrospinning method. Anatase-MWCNT composites (with a negligibly small percentage of rutile and brookite) are obtained by high temperature sintering of the as-spun (polymer-TiO₂-MWCNT) composite fibers. The nanocomposites are characterized using spectroscopy and microscopy. The results show that the functionalized MWCNTs are integrated into the TiO₂ rice grain structures. The enhanced photocatalysis of the nanocomposites in comparison to TiO₂ rice grains and commercially available P-25 is demonstrated in photodegradation of Alizarin Red dye.     

Enhancing the concentration of TiO2 photocatalyst on the external surface of activated carbon by MOCVD

Activated carbon (AC) modified by HNO₃, H₂O₂ and N₂ + O₂ was selected as the support during metal organic chemical vapor deposition (MOCVD) production of TiO₂ photocatalysts in order to enhance the concentration of TiO₂ on the external surface of AC. The catalytic performance of the HNO₃ modified AC supported TiO₂ catalyst was significantly higher than that of the original AC supported TiO₂ catalyst due to the increased concentration of TiO₂ on the external surface of AC confirmed by XPS and EDAX.     

Nonaqueous sol-gel synthesis and growth mechanism of single crystalline TiO2 nanorods with high photocatalytic activity

In this paper, we report on a nonaqueous synthesis of single crystalline anatase TiO₂ nanorods by reaction between TiCl₄ and benzyl alcohol at a low temperature of 80 °C. The resulting samples were characterized with X-ray diffraction, scanning electron microscopy, transmission electron microscopy, high resolution transmission electron microscopy, nitrogen adsorption, X-ray photoelectron spectrometry and UV-vis diffuse reflectance spectroscopy. We proposed that the TiO₂ nanorods were formed through an oriented attachment mechanism. More importantly, these single crystalline anatase TiO₂ nanorods exhibited significantly higher photocatalytic activities than commercial photocatalyst P25. This study provides an environmentally friendly and economic approach to produce highly active TiO₂ photocatalyst.     

On the synthesis,characterization and photocatalytic applications of nanostructured TiO<Subscript>2</Subscript>

Nanocrystalline semiconducting materials are attracting much attention due to their potential applications in solar energy conversion, nonlinear optics, and heterogeneous photocatalysis. In the present investigation, we have synthesized nanostructured TiO₂ photocatalysts, which have been used in the photocatalytic degradation of phenol (one of the most common water pollutants). These catalysts have been prepared through sol-gel technique using titanium tetra-isopropoxide as a raw material for synthesis. Characterization techniques such as XRD, SEM and TEM have been employed for structural/microstructural investigations. XRD results show that the as synthesized TiO₂ nanopowder exhibit anatase phase, TiO₂. The average sizes of the TiO₂ nanopowders are ∼ 5–10 nm. The optical properties of the samples were investigated through UV-visible and fluorescence techniques. It has been observed that absorption edge corresponds to ∼ 410 nm (bandgap, ∼ 3.02 eV). The emission peak in the fluorescence spectrum at ∼ 418 nm corresponds to the bandgap energy of ∼ 2.97 eV. Concentration of phenol (initial concentration, ∼ 100 ppm) with illumination time was monitored by measuring the absorbance of pure and illuminated phenol through UV-visible spectrophotometer. Salient feature of this study relates to the fact that the present sol-gel synthesized TiO₂ nanopowders have been found to be better photocatalysts for phenol degradation than the presently employed commercial TiO₂ (P-25, Degussa) photocatalyst. Thus, whereas phenol concentration, with the presently synthesized TiO₂ nanopowders, the concentration of phenol decreases up to ∼ 32% but for commercial TiO₂ nanopowder (P-25, Degussa), it decreased only up to ∼ 25%. The improved surface area is considered as an important factor for the aforesaid decrease in phenol concentration.     

Characterization of LiF-doped TiO2 and its photocatalytic activity for decomposition of trichloromethane

LiF-doped TiO₂ was prepared by hydrolysis of tetrabutyl titanate in a mixed LiF-H₂O-alcohol solution. The prepared LiF-doped TiO₂ powders were characterized by X-ray diffraction (XRD), differential thermal analysis-thermogravimetry (DTA-TG), X-ray photoelectron spectroscopy (XPS), UV-vis absorption spectroscopy and photoluminescence spectra (PL). The photocatalytic activity was evaluated by the decomposition of trichloromethane (CHCl₃). The results showed that LiF-doping increased the amount of O_OH and oxygen vacancy (OV) on the surface of TiO₂, which were beneficial to photocatalytic activity. LiF-doping inducted the new isolated energy band located above the valence band of TiO₂, which extended the absorption region of TiO₂ to visible light. The results of photocatalytic reaction showed that the photocatalytic activity of LiF-doped TiO₂ was 2.5 times higher than that of pure TiO₂.     

Preparation and characterization of Cu2O-TiO2: Efficient photocatalytic degradation of methylene blue

A series of copper-deposited titania were prepared by photoreduction method under irradiation with a 125-W high-pressure mercury lamp. From XPS and AES results, the deposited-copper formed Ti-O-Cu bond on the surface of TiO₂, and the Cu species on the surface of copper-deposited TiO₂ can be identified as Cu(I). The photocatalytic degradation activity of methylene blue for the Cu₂O-TiO₂ series increased with increasing Cu₂O-deposited content, and then decreased. The highest photocatalytic degradation activity of methylene blue was obtained for 0.16% Cu₂O-TiO₂. When copper-deposited content reached to 0.32%, the photocatalytic activity was lower than that of pure TiO₂. It is shown that Cu₂O on the surface of TiO₂ can trap electrons from the TiO₂ conduction band, and the electrons trapped on the Cu₂O-TiO₂ site are subsequently transferred to the surrounding adsorbed O₂, thereby avoiding electron-hole recombination, and enhancing the photocatalytic activity. Excess copper loading may screen the photocatalyst from the UV source, so the photocatalytic activity diminishes with increasing Cu₂O.     

Effect of the SiO2/TiO2 ratio on the solid acidity of SiO2-TiO2/montmorillonite composites

SiO₂-TiO₂/montmorillonite composites with varying SiO₂/TiO₂ molar ratios were synthesized and the effect of the SiO₂/TiO₂ ratio on the solid acidity of the resulting composites was investigated. Four composites with SiO₂/TiO₂ molar ratios of 0, 0.1, 1 and 10 were synthesized by the reaction of colloidal SiO₂-TiO₂ particles prepared from alkoxides with sodium-montmorillonite at room temperature. The composites showed slight expansion and broadening of the XRD basal reflection, corresponding to the intercalation of fine colloidal SiO₂-TiO₂ particles into the montmorillonite sheets and incomplete intercalation to form disordered stacking of exfoliated montmorillonite and colloidal SiO₂-TiO₂ particles. The colloidal particles crystallized to anatase in the low SiO₂/TiO₂ composites but remained amorphous in the high SiO₂/TiO₂ composites. The specific surface areas (S_BET) of the composites measured by N₂ adsorption ranged from 250 to 370 m²/g, considerably greater than in montmorillonite (6 m²/g). The pore size increased with decreasing SiO₂/TiO₂ molar ratio of the composites. The NH₃-TPD spectra of the composites consisted of overlapping peaks, corresponded to temperatures of about 190 and 290 °C. The amounts of solid acid obtained from NH₃-TPD were 186-338 μmol/g in the composites; these values are higher than in the commercial catalyst K10 (85 μmol/g), which is synthesized by acid-treatment of montmorillonite. The present sample with SiO₂/TiO₂ = 0.1 showed the highest amount of acid, about four times higher than K10.     

Macroporous TiO2/carbon composites prepared via a simple soaking process

A new-type composite photocatalyst of three-dimensional ordered macroporous (3DOM) TiO₂/C was prepared and tested in this paper. 3DOM carbon materials were first prepared by colloidal crystal templating process, and then the sols of TiO₂ from tetrabutyl titanate were infiltrated in the macroporous structures via capillary force. After calcinations at nitrogen flow, TiO₂/C composite materials were prepared. The obtained samples were analyzed by SEM, TEM, XRD and BET. The results indicated that macroporous TiO₂/C can remain the three-dimensional ordered structure and TiO₂ nanoparticles distributed in the interior of macropores uniformly. Eventually, 3DOM TiO₂/C materials were used as a new-type photocatalysts to decompose the methyl orange solution under ultraviolet light, which displayed excellent catalytic activity and regenerative ability.     

Preparation of nitrogen doped TiO2 photocatalyst by oxidation of titanium nitride with H2O2

Nitrogen doped anatase TiO₂ (N-TiO₂) were prepared by hydrothermally treating TiN with H₂O₂. The as-synthesized samples were characterized by X-ray diffraction (XRD), transmission electron microscope (TEM), UV-vis diffuse reflectance spectrum (DRS), Fourier transform infrared spectra (FT-IR) and X-ray photoelectron spectroscopy (XPS) techniques. The results confirmed that the hydrothermal oxidation is an effective method to prepare N-doped TiO₂ anatase. The nitrogen concentration in TiO₂ could be controlled by the concentration of H₂O₂ solution. Photocatalytic degradation of methyl orange (MO) was carried out under visible light and UV-visible light irradiation, respectively. The as-prepared optimal N-TiO₂ showed higher photocatalytic activity than N-P25 and P25, and exhibited excellent reusability.     

Factors affecting CO oxidation over nanosized Fe2O3

Nanocrystallite iron oxide powders with different crystallite sizes were prepared by co-precipitation route. The prepared powders with crystallite size 75, 100 and 150 nm together with commercial iron oxide (250 nm) were tested for the catalytic oxidation of CO to CO₂. The influence of different factors as crystallite size, catalytic temperature and weight of catalyst on the rate of catalytic reaction was investigated using advanced quadrupole mass gas analyzer system. It can be reported that the rate of conversion of CO to CO₂ increased by increasing catalytic temperature and decreasing crystallite size of the prepared powders. The experimental results show that nanocrystallite iron oxide powders with crystallite size 75 nm can be recommended as a promising catalyst for CO oxidation at 500 °C where 98% of CO is converted to CO₂. The mechanism of the catalytic oxidation reaction was investigated by comparing the CO catalytic oxidation data in the absence and presence of oxygen. The reaction which was found to be first order with respect to CO is probably proceeded by adsorption mechanism where the reactants are adsorbed on the surface of the catalyst with breaking OO bonds, then CO pick up the dissociated O atom forming CO₂.     

Photocatalytic performance of Sn-doped TiO2 nanostructured thin films for photocatalytic degradation of malachite green dye under UV and VIS-lights

Sn-doped and undoped nano-TiO₂ particles have been synthesized by hydrotermal process without acid catalyst at 225 °C in 1 h. Nanostructure-TiO₂ based thin films, contain at different solid ratio of TiO₂ in coating, have been prepared on glass surfaces by spin-coating technique. The structure, surface morphology and optical properties of the thin films and the particles have been investigated by element analysis and XRD, BET and UV/VIS/NIR techniques. The photocatalytic performance of the films was tested for degradation of malachite green dye in solution under UV and VIS-lights. The results showed that the hydrothermally synthesized nano-TiO₂ particles are fully anatase crystalline form and are easily dispersed in water, the coated surfaces have nearly super-hydrophilic properties and, the doping of transition metal ion efficiently improved the photocatalytic performance of the TiO₂ thin film. The results also proved that malachite green is decomposed catalytically due to the pseudo first-order reaction kinetics.     

Studies on nitrogen modified TiO2 photocatalyst prepared in different conditions

Nitrogen modified titania photocatalysts (TiO₂/N) were characterized using high resolution transmission electron microscopy (HR-TEM), X-ray diffraction (XRD), dynamic light scattering (DLS), Raman spectroscopy and BET surface area method. The presence of nitrogen in modified photocatalysts has been studied using FT-IR and XPS analyses. The influence of the calcination temperature in the range of 100-350 °C on nanocrystallite as well as particle size of the samples and their photocatalytic activity was investigated. The calcination of TiO₂/N samples caused a growth of the particle size and an increase of their crystallinity. TEM studies present changes of the diameter and shape of TiO₂ particles and nanocrystallites. The XRD and the Raman response of the samples confirmed an increase of the crystallinity of the samples when annealed at higher temperatures.The photocatalytic activity of the modified photocatalysts was determined using the reaction of phenol decomposition. It was shown that phenol decomposition rate was greatly influenced by pH of the solution. The highest phenol degradation using all the modified samples was observed for pH 7.1 which is close to the PZC point established for pristine TiO₂ at pH 6.8.     

Processing and photocatalytic properties of Cu-grafted TiO2 powder from acid treated BaTiO3

The respective influences of calcination, drying methods, and washing conditions on the morphologies, surface properties, and photocatalytic activities of TiO₂ powders prepared from acid treatments of BaTiO₃ were investigated. Rutile powder was obtained using the treatment under strong acid conditions. It possesses a bundle-like shape and comprises rutile nanorods. After calcination, characteristic voids were observed in the particles. Anatase powder was obtained by adjusting pH values of a BaTiO₃ suspension to 2.5-3. Drying at 110 °C engendered the formation of spheroidal anatase, although freeze-dried anatase particles assembled into a flake-like shape. The freeze-dried samples show lower crystallinity. With grafting Cu ions, rutile exhibited better photocatalytic performance for the decomposition of gaseous 2-propanol (IPA) under visible light, although it did not work effectively for anatase.