Cover Photograph : Photo of a close‐up view of flame impingement on test coupon inside the combustion chamber with a mechanical loading system. Abhendra Singh, et al. (Figure 3b)
Cover Photograph : Cover photo courtesy of Airbus Group showing “SiC‐to‐Invar joint component demonstrator developed within ADMACOM EU project, requirements based on NIRSpect flight H/W” (the EU Seventh Framework Programme FP7 2007‐2013 under grant agreement 609188, within the EU project ADMACOM, www.admacomproject.eu ).
Cover Photograph : Photograph of a dipole antenna with the 3D electromagnetic band‐gap (EBG) material as the subtract. Shibin Chen, et al. (Figure 3c).
Cover Photograph : Markus Pfaffinger, et al. (Figure 2). Photo of sintered additive manufactured human skull replica made out of tricalcium phosphate (TCP)
Cover Photograph : Photo of an automotive catalyst supports manufactured by additive manufacturing. Cover photo by Oscar Santoliquido, et al. (Figure 4).
Cover Photograph : Cover photo from Zhuan Li et al. Photo of 3D needle‐punched C/C‐SiC brake disc and pads for high‐speed trains before the dynamometer test (Fig. 7).
Cover Photograph : Cover photo from Lvping Fu et al. Photo of alumina‐chrome castable after slag resistance experiment showing corrosion response (Fig. 6a)
