Preparation and luminescent properties of Eu doped Sr3La(PO4)3 phosphor

Eu²⁺-doped Sr₃La(PO₄)₃ phosphors were synthesized by solid-state reaction method. Their luminescent properties were investigated. The phosphor could be excited by ultraviolet light effectively. The emission spectra exhibit two emission peaks located at 418 nm and 500 nm, respectively. These two peaks originated from two different luminescent centers, respectively. One is nine-coordinated Eu(I) center, other is six-coordinated Eu(II) center. It was found that the doping concentration of Eu²⁺ ions affected the shape of emission spectra. As the doping concentration increasing, Eu²⁺ ions are more likely to form Eu(I) luminescent centers and emit purple light.     

Synthesis and characterization of spherical and rod like nanocrystalline Nd2O3 phosphors

Spherical and rod like nanocrystalline Nd₂O₃ phosphors have been prepared by solution combustion and hydrothermal methods respectively. The Powder X-ray diffraction (PXRD) results confirm that hexagonal A-type Nd₂O₃ has been obtained with calcination at 900 °C for 3 h and the lattice parameters have been evaluated by Rietveld refinement. Surface morphology of Nd₂O₃ phosphors show the formation of nanorods in hydrothermal synthesis whereas spherical particles in combustion method. TEM results also confirm the same. Raman studies show major peaks, which are assigned, to F_g and combination of A_g + E_g modes. The PL spectrum shows a series of emission bands at ∼326-373 nm (UV), 421-485 nm (blue), 529-542 nm (green) and 622 nm (red). The UV, blue, green and red emission in the PL spectrum indicates that Nd₂O₃ nanocrystals are promising for high performance materials and white light emitting diodes (LEDs).     

Optical floating zone method growth and photoluminescence property of MgNb2O6 crystal

MgNb₂O₆ single crystals are grown by the optical floating zone method. The as-grown crystals are dark brown and have dimensions of Ø 4-6 mm × L 87 mm, with the largest crystal domain being Ø 5 mm × L 32 mm. After being annealed, the crystals fade to light brown. The powder X-ray diffraction analysis shows that the crystals have a columbite-type MgNb₂O₆ structure. The crystal grows along the c-axis and the cleavage plane is the (0 1 0) plane. Transmission polarized light microscopy measurements show that the crystal is free of low-angle grain boundaries and inclusions. The crystals have been characterized by Raman scattering, which reveals the change of Nb-O band in annealed and non-annealed samples. The photoluminescence spectra exhibit a broad and strong blue emission band centered at 435 nm.     

Preparation of Sr2Si5N8:Eu for white light-emitting diodes by multi-step heat treatment

In order to enhance luminescence properties of Eu²⁺-doped ternary nitride phosphor for white light-emitting diodes (LEDs), Sr₂Si₅N₈:Eu²⁺ phosphors with different Eu²⁺ concentrations were synthesized using a multi-step heat treatment. Impurities and luminescence properties of prepared Sr₂Si₅N₈:Eu²⁺ phosphors were investigated using X-ray diffraction (XRD) and photoluminescence spectroscopy. Excitation spectra of Sr₂Si₅N₈:Eu²⁺ phosphor showed broad excitation bands by both UV and blue light. Emission peak positions in spectra were red-shifted from 613 to 671 nm as Eu²⁺ ion concentrations increased. Phosphors following a multi-step heat treatment showed excellent luminescence properties. These included high emission intensity and very low thermal quenching compared to measurements using a commercially available YAG:Ce³⁺ phosphor.     

Synthesis and luminescence properties of Bi-doped YVO4 phosphors

YVO₄:Bi³⁺ phosphors have been prepared by a convenient high-temperature solid-state method. X-ray diffraction (XRD), scanning electron microscopy (SEM) and photoluminescence (PL) technologies are used to study the luminescence properties of YVO₄:Bi³⁺ phosphors. The emission and excitation spectra of Bi³⁺ in the YVO₄ lattice have been investigated at room temperature. The excitation band peaks at 330 nm in a region among 250-400 nm, and the emission spectrum exhibits an intense yellowish-white broad emission centered at about 543 nm covering from 400 nm to 800 nm. The full width at half maximum (FWHM) is about 144 nm. The color coordinates of the as-synthesized YVO₄:Bi³⁺ phosphors are in a range of x = 0.358-0.374, y = 0.482-0.496. The dependence of the luminescence intensity on Bi³⁺ concentrations and heat treatment condition has also been discussed. In addition, we found that a little amount of flux NH₄Cl could enhance the Bi³⁺ luminescence intensity.     

Synthesis and photoluminescence properties of color-tunable BaLa2WO7:Eu phosphor

Color-tunable phosphors BaLa_2−xEu_xWO₇ were synthesized via a solid-state reaction. The absorption, excitation, emission and decay curves were obtained to study the luminescence properties. The experimental results indicate that BaLa_2−xEu_xWO₇ phosphors have two regions in the excitation spectra: one is assigned to the charge-transfer state (CTS) band at about 338 nm, and the other is assigned to the intra-4f transitions at 360-600 nm. The emission spectra of BaLa_2−xEu_xWO₇ phosphors excited at 395 nm exhibit a series of sharp peaks, which are attributed to the ⁵D₀ → ⁷F_J (J = 0, 1, 2, 3, 4) transitions. Luminescence from higher excited states, such as ⁵D₁, ⁵D₂, and ⁵D₃, were also observed at low Eu³⁺ concentration. The optimal emission intensity of ⁵D₀ → ⁷F₂ red emission is at x = 0.4 (BaLa_1.6Eu_0.4WO₇). The chromaticity coordinates of BaLa_2−xEu_xWO₇ phosphors vary with Eu³⁺ content from white, orange-red, to red, making it a candidate for a white-light-emitting phosphor in UV-LEDs.     

Luminescence studies of Ba1−xMg2−y(PO4)2:xEu, yMn phosphor

The phosphors BaMg₂(PO₄)₂ doped with Eu²⁺ and Mn²⁺ solely or doubly were prepared by solid state reaction, and their luminescent properties were also investigated. Under the excitation of 322 nm, it has been observed a broad blue emission band centered at 417 nm and a red emission band centered at about 665 nm, resulting from Eu²⁺ and Mn²⁺, respectively. Resonance-type energy transfers from Eu²⁺ to Mn²⁺ were discovered by directly overlapping the emission spectra of Eu²⁺ and the excitation spectra of Mn²⁺. According to the changes of relative intensities of Eu²⁺ and Mn²⁺ emission, efficiencies of energy transfer were calculated. Based on the principle of energy transfer, the relative intensities of blue and red emission could be tuned by adjusting the contents of Eu²⁺ and Mn²⁺.     

Reddish orange long afterglow phosphor Ca2SnO4:Smprepared by sol-gel method

A reddish orange light emissive long afterglow phosphor, Ca₂SnO₄:Sm³⁺ was prepared by sol-gel method at lower temperature. The synthesized phosphors were characterized by X-ray diffraction, scanning electron micrograph images, photoluminescence spectra, afterglow decay curves and thermoluminescence spectra. Three emission peaks locate at 565 nm, 609 nm and 655 nm corresponding to CIE chromaticity coordinates of x = 0.53 and y = 0.47, which indicates the reddish orange light emitting. The fluorescent intensity and the afterglow characteristic depends on the concentration of Sm³⁺ and the optimized concentration is 1.5 mol%. The afterglow decay curves are well fitted with triple-exponential decay models. The thermoluminescence glow curves show that the Sm³⁺ induces suitable trap depth and result in the long afterglow phenomenon, and the corresponding increase or decrease in afterglow is associated with trap concentration, nearly no change in trap depth. The 1.5 mol% Sm³⁺-doped Ca₂SnO₄ sample has the biggest trap concentration and exhibit the best afterglow characteristic, its’ afterglow time is about 1 h. The phosphorescence mechanism of this long afterglow phosphor was discussed.     

Preparation and luminescent characteristics of Sr3RE2(BO3)4:Dy (RE = Y, La, Gd) phosphors for white LED

Dysprosium-activated Sr₃RE₂(BO₃)₄ (RE = Y, La, Gd) phosphors were synthesized by a high temperature solid-state reaction method. The phase uniformity of the phosphors was characterized by X-ray powder diffraction (XRD) and the luminescence characteristics were investigated. The excitation spectra at 575 nm emission show strong spectral bands in the region of 300-500 nm. The emission spectra of the phosphors with 365 nm excitation show three bands centered at 484 nm, 575 nm and 680 nm, which originate from the transitions of ⁴F_9/2 → ⁶H_15/2, ⁴F_9/2 → ⁶H_13/2 and ⁴F_9/2 → ⁶H_11/2 of Dy³⁺, respectively. The effect of Dy³⁺ concentration on the emission intensity of the phosphors was investigated. The fluorescence decay curves for ⁴F_9/2 → ⁶H_13/2 excited at 365 nm and monitored at λ_em of 575 nm were measured. The decay times decreased slowly with increasing Dy³⁺ doping concentration due to a trap capturing to resonance fluorescence transfer of the activated ions and due to the exchange interactions between activated ion pairs. In order to determine the type of interaction between activated ions, the concentration dependence curves (lg(I/x) versus lg x) of Sr₃RE₂(BO₃)₄:Dy³⁺ (RE = Y, La, Gd) were plotted. The concentration quenching mechanism of the ⁴F_9/2 → ⁶H_13/2 (575 nm) transition of Dy³⁺ is the d-d interaction. All results indicate these phosphors are promising white-color luminescent materials.     

Synthesis and photoluminescence of Eu by co-doping Eu and Cl in Sr2P2O7 under air atmosphere

A novel phosphor Sr₂P₂O₇ co-doped with europium ion and chlorine ion was firstly synthesized by solid state reaction under air atmosphere. Its properties were systematically analyzed by X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS) and fluorescence spectra. The introduction of chlorine into the system was helpful and necessary to Eu³⁺ substitute Sr²⁺ site and subsequently to reduce Eu³⁺ to Eu²⁺, XPS results confirmed that some amount of Eu³⁺ ions could be reduced to Eu²⁺ ions under air atmosphere at high temperature. The reduction tendency of Eu³⁺ depends not only on the doping Cl⁻ content, but also on the sintering temperature and time. Photoluminescence spectra also revealed that europium ions were present in divalent as well as trivalent oxidation states, the emission peak at 415 nm is ascribed to the typical 5d-4f transition of Eu²⁺, 592 nm and 613 nm assigned to the characteristic transitions of ⁵D₀-⁷F_1,2 of Eu³⁺. Such abnormal reduction was attributed to the electronegative defects formed by nonequivalent substitution of Eu³⁺ on the Sr²⁺ sites in the investigated phosphors.     

Preparation, structure and photoluminescence of nanoscaled-Nd: Lu3Al5O12

Nd:Lu₃Al₅O₁₂ (Nd:LuAG) nano-crystalline was synthesized by co-precipitation method. Its phase transformation, structure, absorption and photoluminescence properties were studied. The Nd:LuAG polycrystalline phase is formed above 900 °C and its particle sizes are in the range of 18-36 nm. The structure of Nd:LuAG was refined by Rietveld method. The lattice parameters and the distortion of Lu³⁺-O²⁻ polyhedron in Nd:LuAG are larger than that of in pure LuAG. Because the distortion of Lu³⁺-O²⁻ polyhedron is larger than that of Y³⁺-O²⁻ polyhedron in YAG and the distance of Lu³⁺-O²⁻ is smaller than that of Y³⁺-O²⁻ in YAG, Nd³⁺ in LuAG experiences a stronger crystal field effect, which is proved by the crystal field strength and the chemical environment parameter. The absorption spectrum shows that Nd:LuAG has a broad absorption band at 808 nm with FWHM above 6 nm, which is favorable for improving laser efficiency. The fluorescence lifetime from ⁴F_3/2 → ⁴I_11/2 transition is 320 μs and longer than that of Nd:YAG. The longer lifetime is propitious to energy storage. The emission cross section at 1064 nm is 2.89 × 10⁻¹⁹ cm², taking into account the Boltzmann distribution of the excited state. The emission cross section in Nd:LuAG is also larger than that of Nd:YAG, which is useful for laser operation. All results indicate that Nd:LuAG is a promising crystal material to apply in high energy lasers.     

Vacuum ultraviolet spectroscopic properties of KSrPO4:Tb

KSrPO₄:Tb³⁺ phosphors were prepared by a solid-state method and their photoluminescence properties were investigated under vacuum ultraviolet excitation. In the excitation spectrum monitoring at 544 nm, the band in the region of 120-162 nm can be attributed to be the overlap of host absorption and charge transfer transition of O²⁻ → Tb³⁺, and the band ranging from 162 to 300 nm was assigned to the f-d transition of Tb³⁺. The photoluminescence spectrum shows that the phosphors exhibited a strong green emission around 544 nm corresponding to the ⁵D₄ → ⁷F₅ transition of Tb³⁺ under the excitation of 147 nm. Optimal emission intensity was obtained when x = 7% in KSr_1-xPO₄:xTb³⁺ and the luminescent chromaticity coordinates were calculated to be (x = 0.317, y = 0.522) for KSr_0.93PO₄:7%Tb³⁺.     

Photoluminescence and thermoluminescence studies of Mg2SiO4:Eu nano phosphor

Nanoparticles of Eu³⁺ doped Mg₂SiO₄ are prepared using low temperature solution combustion technique with metal nitrate as precursor and urea as fuel. The synthesized samples are calcined at 800 °C for 3 h. The Powder X-ray diffraction (PXRD) patterns of the sample reveled orthorhombic structure with α-phase. The crystallite size using Scherer's formula is found to be in the range 50-60 nm. The effect of Eu³⁺ on the luminescence characteristics of Mg₂SiO₄ is studied and the results are presented here. These phosphors exhibit bright red color upon excitation by 256 nm light and showed the characteristic emission of the Eu³⁺ ions. The electronic transition corresponding to ⁵D₀ → ⁷F₂ of Eu³⁺ ions (612 nm) is stronger than the magnetic dipole transition corresponding to ⁵D₀ → ⁷F₁ of Eu³⁺ ions (590 nm). Thermoluminescence (TL) characteristics of γ-rayed Mg₂SiO₄:Eu³⁺ phosphors are studied. Two prominent and well-resolved TL glows with peaks at 202 °C and 345 °C besides a shoulder with peak at ∼240 °C are observed. The trapping parameters-activation energy (E), order of kinetics (b) and frequency factor (s) are calculated using glow curve shape method and the results obtained are discussed.     

Eu/Sm ions co-doped white light luminescence SrSiO3 glass-ceramics phosphor for White LED

Eu²⁺/Sm³⁺ co-doped silicate glass was prepared by high temperature melting under reducing atmosphere and the Eu²⁺/Sm³⁺ co-doped SrSiO₃ transparent glass-ceramics were obtained after heat-treatment. X-ray diffraction (XRD) and Raman spectra confirmed the formation of SrSiO₃ nano-crystals in the glass matrix. The photoluminescence excitation (PLE) spectra and photoluminescence (PL) spectra of the samples were measured. A broad emission band from 400 nm to 550 nm due to the 4f⁶5d¹ → 4f⁷ transitions of Eu²⁺ was observed, as well as several sharp emission peaks at 563 nm, 600 nm, 646 nm and 713 nm ascribed to the 4f → 4f transitions of Sm³⁺. The luminescence properties of the glass ceramics with different molar ratio of Eu²⁺/Sm³⁺ were studied and the corresponding chromaticity coordinates were calculated. The ultraviolet light-emitting diode (UV-LED) excitable glass-ceramics emitting white light were obtained by tuning the relative emission intensity of Eu²⁺ and Sm³⁺. The results indicate that the Eu²⁺/Sm³⁺ co-doped SrSiO₃ transparent glass-ceramics can be used as a potential matrix material for White LED under UV-LED excitation.     

Synthesis and characterization of YNbTiO6:Dy phosphor

A novel yellow phosphor of Dy³⁺ activated YNbTiO₆ has been prepared by high temperature solid-state reaction, and its luminescence properties have been investigated. The excitation spectra monitored at 575 nm have several strong peaks from 350 to 480 nm. Under 365 nm excitation, the emission spectra of composition-optimized (Y_0.9Dy_0.1)NbTiO₆ phosphor exhibit a dominant peak located at about 575 nm with the Commission Internationale de l’Eclairage (CIE) chromaticity coordinates of (0.385, 0.411). The energy transfer between Dy³⁺ is found to be through exchange interaction.     

Photocatalytic performance of nano-photocatalyst from TiO2 and Fe2O3 by mechanochemical synthesis

Nano-particles of homogeneous solid solution between TiO₂ and Fe₂O₃ (up to 10 mol%) have been prepared by mechanochemical milling of TiO₂ and yellow Fe₂O₃/red Fe₂O₃/precipitated Fe (OH)₃ using a planetary ball mill. Such novel solid solution cannot be prepared by conventional co-precipitation technique. A preliminary investigation of photocatalytic activity of mixed oxide (TiO₂/Fe₂O₃) on photo-oxidation of different organic dyes like Rhodamine B (RB), Methyl orange (MO), Thymol blue (TB) and Bromocresol green (BG) under visible light (300-W Xe lamp; λ > 420 nm) showed that TiO₂ having 5 mol% of Fe₂O₃ (YFT1) is 3-5 times higher photoactive than that of P25 TiO₂. The XRD result did not show the peaks assigned to the Fe components (for example Fe₂O₃, Fe₃O₄, FeO₃, and Fe metal) on the external surface of the anatase structure in the Fe₂O₃/TiO₂ attained through mechanochemical treatment. This meant that Fe components were well incorporated into the TiO₂ anatase structure. The average crystallite size and particle size of YFT1 were found to be 12 nm and 30 ± 5 nm respectively measured from XRD and TEM conforming to nanodimensions. Together with the Fe component, they absorbed wavelength of above 387 nm. The band slightly shifted to the right without tail broadness, which was the UV absorption of Fe oxide in the Fe₂O₃/TiO₂ particle attained through mechanochemical method. This meant that Fe components were well inserted into the framework of the TiO₂ anatase structure. EPR and magnetic susceptibility show that Fe³⁺ is in low spin state corresponding to μ_B = 1.8 BM. The temperature variation of μ_B shows that Fe³⁺ is well separated from each other and does not have any antiferromagnetic or ferromagnetic interaction. The evidence of Fe³⁺ in TiO₂/Fe₂O₃ alloy is also proved by a new method that is redox titration which is again support by the XPS spectrum.     

Preparation of Dy-activated strontium orthosilicate (Sr2SiO4:Dy) phosphors and its photoluminescent properties

Dy³⁺-activated β/α′-Sr₂SiO₄ phosphors were successfully prepared by solid-state reaction method with ammonium chloride (NH₄Cl) as the flux. The influences of calcination temperatures, amounts of NH₄Cl and the concentrations of Dy³⁺ on phase composition, morphology and the photoluminescent properties of as-prepared powders were investigated in detail. The β and α′ phases of Sr₂SiO₄ were obtained with 1 wt% and 2-5 wt% NH₄Cl, respectively, as the sintered condition was at 1000 °C for 4 h. With increasing the amount of NH₄Cl, the morphology of phosphors changed from needlelike to regular polyhedron shape and the colors of the Sr₂SiO₄:Dy³⁺ phosphors changed from blue-green to white. The luminescence intensity of ⁴F_9/2 → ⁶H_15/2 transition was slightly higher than that of ⁴F_9/2 → ⁶H_13/2 (ΔL = 2, ΔJ = 2) transition owing to the low-symmetry around Dy³⁺ ions. The optimum concentration of Dy³⁺ was 2.0 mol% and the concentration quenching were caused by the d-d interaction and a cross relaxation. The yellow-to-blue intensity ratio (Y/B) of Dy³⁺ emission did not to change with varying the Dy³⁺ concentration using Li⁺ ions for charge compensation. These indicate that this phosphor can be used as a potential candidate for the phosphor-converted white LEDs with a UV chip.     

Sinterability and dielectric properties of Ba0.55Sr0.4Ca0.05TiO3-CaTiSiO5-Mg2TiO4 composite ceramics

The composite ceramics of Ba_0.55Sr_0.4Ca_0.05TiO₃-CaTiSiO₅-Mg₂TiO₄ (BSCT-CTS-MT) were prepared by the conventional solid-state route. The sintering performance, phase structures, morphologies, and dielectric properties of the composite ceramics were investigated. The BSCT-CTS-MT ceramics were sintered at 1100 °C and possessed dense microstructure. The dielectric constant was tailored from 1196 to 141 as the amount of Mg₂TiO₄ increased from 0 to 50 wt%. The dielectric constant and dielectric loss of 40 wt% Ba_0.55Sr_0.4Ca_0.05TiO₃-10 wt% CaTiSiO₅-50 wt% Mg₂TiO₄ was 141 and 0.0020, respectively, and the tunability was 8.64% under a DC electric field of 8.0 kV/cm. The Curie peaks were broadened and depressed after the addition of CaTiSiO₅. The optimistic dielectric properties made it a promising candidate for the application of tunable capacitors and phase shifters.     

White light emission in Tm/Er/Yb tri-doped Y2O3 transparent ceramic

Tm³⁺/Er³⁺/Yb³⁺ triply doped Y₂O₃ transparent ceramics were fabricated by solid state reaction and characterized from the point of view of white light upconversion luminescence. All the samples exhibited high transparency not only in near-infrared band but also in visible region. Strong red (Er³⁺: ⁴F_9/2 → ⁴I_15/2), green (Er³⁺: ²H_11/2, ⁴S_3/2 → ⁴I_15/2) and blue (Tm³⁺: ¹G₄ → ³H₆) upconversion emissions have been observed under 980 nm excitation at room temperature. By varying the concentration of Er³⁺ ion, various colors of upconversion luminescence (pure blue, bluish green, pure green and yellowish green), including white light with CIE-X = 0.295 and CIE-Y = 0.312, can be easily achieved.