AN OBSERVATION OF UNHEALED POROSITIES AND CRYSTALLINE STEPS IN ALUMINIUM ALLOY FORGINGS

铝合金锻件中有时有未锻合的疏松和残留的枝晶自由表面,并保留有原始的结晶台阶。枝晶优先沿<100>方向长大,结晶台阶主要属于{100}及{110}晶面族。 未锻合疏松周围的合金基体有一定变脆倾向,有时可以观察到解理断口。     

柱状晶对Fe-3%Si电工钢冷轧织构演变规律的影响

Fe-3%Si电工钢铸锭中普遍存在柱状晶,其晶体学及形状各向异性对随后的热轧、冷轧及退火织构产生很大的影响.利用xRD与EBSD技术对长轴分别平行于轧面法向(ND),轧制方向(RD)和横向(TD)的柱状晶冷轧样品的织构及组织进行了研究,并对晶界的特殊作用进行了分析.结果表明,中等压下量下,3种柱状晶样品具有不同程度的{001}织构遗传性,即3种样品均不同程度的摆脱了{111}线织构的形成;柱状晶长轴平行于ND和TD时,{001}取向在冷轧时得到大的保留;柱状晶长轴平行于RD时,得到最强的{111}〈112〉织构;柱状晶长轴平行于TD时,冷轧组织中旋转立方织构及{111}〈110〉织构较强.此外,3种样品的织构均表现出由立方→{001}〈130〉→{113}〈251〉的过渡路径,与等轴多晶样品沿α线和γ线转动的路径不同.不同方向的柱状晶晶界对冷轧变形过程中晶粒转动的作用不同,但因晶粒尺寸大而作用有限,且与初始取向相关.     

Evolution of {001 } （110） orientation and related lattice rotation of A1 alloy 6111 during rolling

The texture evolution and lattice rotation in A1 alloy 6111 with an initial {001} （110）component during symmetrical and asymmetrical roiling were investigated by means of orientation distribution function（ODF）. The results show that the as-rolled initial {001 } （110） orientation evolves into not only the copper orientation but also all the other orientations along the β fiber, including the brass orientation, by lattice rotation around special directions. Compared with the symmetrical rolling, the {001 } （110）component in the surface layer on the slower roller side evolves more quickly into the orientations along the β fiber during asymmetrical rolling, while that in the surface layer on the faster roller side evolves more slowly.     

退火温度对6.5%Si极薄带织构及磁性能的影响

采用单辊甩带法制备了厚度为0.03 mm的6.5%Si极薄带,并在真空炉中进行了880 ℃和920 ℃的退火处理。利用XRD和EBSD研究了其在退火后的宏观和微观织构演变规律。结果表明:经单辊甩带制得的6.5%Si极薄带织构主要由{001}<100>立方织构、{110}<001> Goss织构和{112}<111>织构组成。随着退火温度的升高,λ纤维仍占主导地位,且晶粒尺寸逐渐增大。特别是在920 ℃退火时,{001}<120>和{001}<100>晶粒的尺寸优势逐渐增大,不利织构{111}<110>和{111}<112>逐渐减弱,且最终的磁感应强度B₅₀=1.644 T,铁损耗P_10/400=5.896 W/kg。     

化学气相沉积钨单晶管材表面电解蚀刻形成的{110}晶面形貌

报导了具有<111>晶向(轴向)的管状钼单晶基体化学气相沉积(CVD)钨单晶涂层的电解蚀刻工艺及形成的{110}晶面形貌。实验发现,通过电解蚀刻,表面的{110}晶面可以完全被蚀刻出来。蚀刻出来的{110}晶面呈台阶结构,并同<111>晶轴相平行。蚀刻出来的{110}晶面在圆管的表面分成均等六个区。每个区内{110}晶面的台阶面的宽度呈现周期性的变化,开始台阶面较宽,逐渐变窄,然后通过一过渡区后,进入下一周期,{110}晶面的台阶面的宽度又逐渐变宽。     

L485M管线钢的拉伸性能各向异性

利用Z1200材料拉伸试验机检验了L485M管线钢热轧板卷纵向、30°、45°、横向4个不同方向的屈服强度和抗拉强度,然后利用X′ Pert Pro MRD X光衍射仪对板卷厚度不同位置、不同方向的织构进行了检测和分析。结果表明:L485M钢强度指标各向异性明显,横向＞纵向＞45°＞30°,且横向强度明显高于其他3个方向。L485M钢织构检验结果与拉伸性能表现出明显的一致性,纵向、30°、45°主要织构基本为{112}<111>、{001}<110>,理论上横向与纵向晶面一致,晶向相差90°,即横向织构主要为{112}<110>、{001}<112>,因此其性能与其他方向差别明显。     

The crystallography of stress corrosion cracking in face centered cubic single crystals

The crystallography of transgranular stress corrosion cracking was studied for single crystals of α-brass (tested in 14 N NH₃), copper (tested in 1 M NaNO₂), and 304L austenitic stainless steel (tested in boiling 45 wt% MgCl₂). All fracture surfaces had characteristic flat parallel facets separated by crystallographic and/or fan-shaped steps. In α-brass and copper the facets consisted of {110} planes with the crystallographic steps following {111} planes. In 304L austenitic stainless steel cracking occurred primarily on the {100}, but secondary cracking on {110} was also found. Very smooth crystallographic-like steps were observed, generally following {100} planes. It is concluded that stress corrosion cracking in all systems tested occurred by cleavage. It is suggested that the stress corrosion cracks propagate on the lowest surface energy planes.     

Textures variation of 3104 aluminum alloy sheets under different rolling conditions

1　INTRODUCTIONLargequantityoftheAl Mn Mgalloy 310 4isusedinthemanufactureofaluminumbeverage .Muchattentionwaspaidtothecontroloftextureandearinginthedeepdrawingstagesofmanufacture .Thetex tureinthecanstockwasextensivelyinvestigated .Oneearingofaluminumalloyisverycloserelatedtothetexture ,agoodassociationofthetexturescompo nentsearingdropsobviously ,inthissituationthe 4 foldearingat 0°/90°andearingat± 4 5°occursto gether[15] .Theappearanceof 4 foldearingat 0°/90°isduetothecubetext…     

横轧3 104铝合金变形织构的研究

应用极图分析及织构定量计算的方法，研究了横轧对3104铝合金变形织构的影响，结果表明：在与常规轧制相同压下量的横向轧制下，3104铝合金中的｛112｝，｛213｝丝织构体积百分数均低于常规轧制时各组分的体积百分数，而横向轧制则使得｛102｝丝织构增加较多，在横向轧制过程中出现强旋转立方织构和新｛110｝＜557＞取向的织构。     

Texture Evolution in a Ti-Ta-Nb Alloy Processed by Severe Plastic Deformation

Titanium alloys are extensively used in a variety of applications because of their good mechanical properties, high biocompatibility, and corrosion resistance. Recently, ??-type Ti alloys containing Ta and Nb have received much attention because they feature not only high specific strength but also biocorrosion resistance, no allergic problems, and biocompatibility. A Ti-25Ta-25Nb ??-type titanium alloy was subjected to severe plastic deformation (SPD) processing by accumulative roll bonding and investigated with the aim to observe the texture developed during SPD processing. Texture data expressed by pole figures, inverse pole figures, and orientation distribution functions for the (110), (200), and (211) ??-Ti peaks were obtained by XRD investigations. The results showed that it is possible to obtain high-intensity share texture modes ({001}??110??) and well-developed ?? and ??-fibers; the most important fiber is the ??-fiber ({001} $ \left\langle {1\bar{1}0} \right\rangle $ to {114} $ \left\langle {1\bar{1}0} \right\rangle $ to {112} $ \left\langle {1\bar{1}0} \right\rangle $ ). High-intensity texture along certain crystallographic directions represents a way to obtain materials with high anisotropic properties.     

形变诱导Inconel 625合金管材静态再结晶行为

使用室温压缩变形与再结晶退火处理研究了Inconel 625高温合金冷变形及再结晶行为,采用EBSD技术分析冷变形过程中的应变分布、晶粒尺寸变化、组织与织构演变,分析冷变形Inconel 625合金再结晶过程中再结晶分数、晶粒尺寸、组织及织构演变。研究表明,Inconel 625合金在变形量为35%~65%时具有良好的塑性,随着变形量的增加,晶粒尺寸减小,应变分布越均匀,{111}<112>织构和{110}<001>织构逐渐减弱,而{001}<110>织构和{112}<111>织构略为增强。冷变形Inconel 625合金再结晶退火处理后,随着退火温度与保温时间的升高,再结晶分数增大;随着变形量的增大,Inconel 625合金发生完全再结晶时温度减小,且发生完全再结晶时的晶粒尺寸变小,变形量为35%时,再结晶过程主要是{112}<111>织构{123}<634>变形织构转变为{110}<112>织构、{001}<100>织构与{124}<211>织构。随着变形量增加到50%及65%时,冷变形产生的{123}<634>织构在再结晶过程中转变成了{124}<211>织构。     

新能源汽车用含稀土无取向硅钢生产过程中组织、织构演变

采用光学显微镜、X射线衍射仪及扫描电镜对含稀土无取向硅钢整个生产流程中的显微组织及织构演变进行研究。结果表明,热轧板在厚度方向上有显著的分层,即表层的再结晶层、过渡层、中间层的变形组织层,其织构主要包含铜型、黄铜型织构;正火后晶粒发生了完全再结晶,织构类型相对热轧基本无变化,但强度减弱;两次冷轧后的组织均为纤维组织,形成了以α、γ线性织构为主的织构类型,还出现了强度较高的反高斯织构如{001}<110>、{112}<110>、{111}<110>;脱碳退火后发生部分再结晶,织构相对于冷轧态α、γ线性织构强度均减小;在高温退火阶段晶粒发生再结晶,存在以{111}<112>、{111}<110>为主的γ织构,以及{100}<001>织构。     

衬底温度对CVD金刚石薄膜织构的影响

利用扫描电镜观察了CVD自支撑金刚石薄膜的表面形貌组织,利用X射线衍射技术检测了薄膜织构。研究表明,不同衬底温度条件下制备的金刚石薄膜形成不同的织构和表面形貌组织,衬底温度升高使生长速率参数α减小,金刚石晶体最快生长晶向由〈100〉晶向向〈011〉和〈111〉晶向转变,使得薄膜中{011}和{111}织构随温度提高不断...     

高磁感取向硅钢轧制及热处理过程中的晶界和织构演化

采用电子背散射衍射(EBSD)对不同轧制和热处理态的高磁感取向硅钢的重合位置点阵(CSL)晶界和织构进行了研究。结果表明,热轧态取向硅钢截面织构呈层状分布,表层主要为{110}<001>Goss织构,1/4厚度主要为{001}<110>立方织构、{112}<111>铜型织构和{110}<001>Goss织构,而心部则形成较强的{112}<111>铜型织构、{111}<110>形变织构和{110}<001>Goss织构;常化处理后截面织构梯度变化不明显,但中心位置{112}<111>织构向{110}<001>Goss织构转变。冷轧退火态主要织构为{110}<001>Goss织构、{112}<111>织构和{111}<110>形变织构。二次再结晶后,则生成强烈的{110}<001>Goss织构。随着织构的变化,CSL晶界也发生了明显的转变。热轧态CSL重位晶界中∑3~∑29均有出现,但比例较低;常化处理后CSL重位晶界比例增加,冷轧退火后CSL晶界比例大幅提高,特别是∑3、∑7、∑9和∑15等晶界;二次再结晶后,由于CSL晶界发生了转化,CSL晶界类型减少,∑3、∑13等晶界比例增加,∑9晶界消失。     

Insight into the Mechanism of Nanoparticle-Aggregated Crystallization for Mesocrystals

研究和探讨了银介观晶体的形成过程和机理,银介观晶体通过AgNO3溶液和Sn替换反应合成原始的纳米微粒。在200mmol/L浓度下,纳米颗粒沿着<211>方向聚集形成树突,银纳米颗粒是3×{422}位面;相应的,当浓度达到1mol/L时,形成的纳米颗粒在沿着<211>方向聚集的同时,在<110>方向形成第2个聚集单位,并最终形成多空的盘状结构的介观晶体,其厚度约为50nm;当浓度为2mol/L时,纳米颗粒继续沿着<110>方向聚集,形成三角形的板状结构,随着聚集的越来越多,最终形成厚度超过100nm的单晶介观晶体。     

冷轧方式和退火温度对Al-4Cu-0.73Mg合金织构和微观组织的影响

采用硬度测试、X射线衍射(XRD)、电子背散射衍射(EBSD)等方法研究了单向轧制、交叉轧制和退火温度对Al-4Cu-0.73Mg(wt%)合金织构演变和微观组织的影响。结果表明:单向轧制试样在100~300 ℃退火保温1 h后显示出明显的Copper织构{112} <111>、S织构{123} <634>和Brass织构{011}<211>,而交叉轧制试样表现出强烈的Brass织构和H织构{011}<755>。当退火温度高于300 ℃,单向轧制和交叉轧制试样中的变形织构逐渐沿α取向线转变为由P织构{011}<001>、L织构{011}<011>、E织构{111}<110>和R织构{124}<211>等组成的再结晶织构。单向轧制和交叉轧制试样的晶粒尺寸随退火温度的升高先增加后减小,均在350 ℃退火1 h后有最大晶粒尺寸,分别约为8.2 μm和11.5 μm。单向轧制和交叉轧制试样均在冷轧后硬度值最高,约为108 HV,之后硬度值随退火温度的升高而逐渐下降,两种轧制试样的硬度值最终均稳定在50 HV左右。总体来看,轧制方式对试样织构的影响比对力学性能的影响大。     

Effect of deformation texture on the anisotropy of elasticity and damage of two-phase steel sheets

The effect of small tensile deformation (3, 6, and 10%) on the texture of preliminary annealed sheets of two-phase DP600 steel (0.10 C, 0.15 Si, 1.4 Mn, 0.007 P, 0.008 S, 0,009 N, 0.02–0,06 Al, 1 Cr–Mo–Ni (wt %)) is studied. Against the background of the annealing texture in the sheets, the {001} <110>, {111} <110>, {111} <112>, {111} <312> components of the slip texture and {115} <110>, {115} <552>, {221} <110>, {221} <114> orientations are developed, which can be associated with the twinning processes. The anisotropy pattern of the Young’s modulus (E) in the sheet plane remains the same after tensile deformation of the annealed sheets. After tension, the values of E decrease in all directions as a result of the onset and development of microdamages. The anisotropy of damage (D) in the plane of the steel sheets after tension is characterized by a maximum in the transverse direction (TD) and a minimum in the rolling direction (RD).     

自生TiCp/Ti复合材料中TiC的生长习性

利用配位多面体生长基元理论研究了自生TiCp/Ti复合材料中TiC的生长习性。TiC晶体的配位多面体生长基元为TiC6。生长基元进入{100}面时为4个棱边同时联结，生长速率最快，不易显露；进入{111}面时为共面联结，生长速率最慢，容易显露。因此，TiC晶体的理想形态为{111} 面为显露面的八面体。TiC晶胚在熔体中生长时，受传热传质过程的影响，6个顶角所处的{100}方向生长速率加快，形态失稳，从{100}方向顶角部位生长出二次枝晶臂，最终形成棱面枝晶状TiC。如枝晶形成时低生长速度的晶面上形成大量的晶体缺陷，则它们的生长速度加快，棱面消失，成为光滑枝晶。     

Orientation relationships between the icosahedral phase and β solid solution in quasicrystal-forming quenched Al61Cu26Fe13 alloys

Electron microscopy has been used to study orientation relationships (ORs) and stable misorientations between corresponding directions of the icosahedral ι phase and the β phase (CsCl type structure) of the solid solution in quenched two-phase Al₆₁Cu₂₆Fe₁₃ alloys with a dendritic structure. Calculated values of the azimuthal misorientations have been obtained for the directions of the reciprocal lattices of the ι and β phases in diffraction patterns A5 _l ,[113]_β; A2 _l , [111]A5_β for the basic $OR[110]_\beta \left\| {A5_l , [\bar 11\bar 1]_\beta } \right\|A2_l $ and close orientation conditions such as $[110]_\beta \left\| {A5_l , [\bar 110]_\beta } \right\|A2_l ; [11\bar 1]_\beta \left\| {A3_l , [\bar 110]_\beta } \right\|A2_l ; [111]_\beta \left\| {A2_l , [\bar 110]_\beta } \right\|A2_l $ . Two possible mechanisms of stabilization of the azimuthal misorientations revealed are discussed; first, the realization of the $OR[111]_\beta \left\| {A2_l , [\bar 110]_\beta } \right\|A2_l $ in quenched Al-Cu-Fe alloys and, second, the stability of the arising misorientations as a result of the formation of a layer with a modulated icosahedral structure at the boundaries between the β and gi phases.     

罩式退火工艺的升温速率对无取向硅钢织构及性能的影响

研究了罩式退火工艺的升温速率对0.8%Si无取向硅钢组织、织构及磁性能的影响。结果表明,经过不同升温速率退火后,无取向硅钢的再结晶织构主要为{111}织构,伴随有{110}、{100}织构。随着退火升温速率的提高,晶粒尺寸逐渐增大,{111}织构明显减弱,{110}织构明显增强,{100}织构没有明显变化,铁损P_1.5/50逐渐降低,磁感应强度B₅₀₀₀逐渐增强。但当升温速率由80 ℃/h升高至100 ℃/h时,{111}织构出现一定程度的增强,{110}织构出现减弱,{100}织构没有明显变化,铁损P_1.5/50增大,磁感应强度B₅₀₀₀减小。在退火升温速率为80 ℃/h时,无取向硅钢可获得最优的磁性能:P_1.5/50=4.249 W/kg,B₅₀₀₀=1.715 T。