A simple planar monopole UWB slot antenna with dual independently and reconfigurable band‐notched characteristics

An extremely simple and compact planar monopole ultrawideband (UWB) slot antenna with dual band‐notched characteristics is proposed. The antenna is composed of a circular radiation patch, a microstrip‐fed line, and a partial ground. By etching an arc‐shaped slot on the radiation patch and a C‐like slot on the feed line, dual notched frequency bands at 3.3–3.7 GHz for WiMAX and 5.15–5.825 GHz for WLAN are achieved. And, the two notched bands can be adjusted independently by varying the length of the slots. Moreover, the band‐notched characteristics can be reconfigurable by shorting the corresponding slots. So, the antenna is capable of operating in one of multiple modes which makes it an excellent candidate for UWB applications. Meanwhile, experimental results indicate that the antenna has an available impendence bandwidth from 2.9 to 11 GHz which covers the UWB frequency band, and nearly omnidirectional patterns, stable gains, small group delay in operating band except rejected bands. © 2014 Wiley Periodicals, Inc. Int J RF and Microwave CAE 24:706–712, 2014.     

Design and analysis of multiband notched pitcher‐shaped UWB antenna

To mitigate the interference with coexisting wireless systems operating over 3.3–3.6 GHz, 5.15–5.825 GHz, and 7.725–8.5 GHz bands, a novel triple band notched coplanar waveguide fed pitcher‐shaped planar monopole antenna is presented for ultrawideband applications. Bands notched characteristics are achieved using a novel mushroom type electromagnetic band gap structure like resonator and a split ring slot. A conceptual equivalent RLC (Resistor‐Inductor‐Capacitor)‐resonant circuit is presented for the band notched characteristics . Furthermore, the input impedance and VSWR (voltage standing wave ratio) obtained from the equivalent circuit are validated with simulated and measured results. Performances of the antennas in both, the frequency domain and the time domain are investigated. The simulated and measured results demonstrate that the proposed antennas have wide impedance bandwidth, nearly stable radiation patterns, and suppression of gain and total radiation efficiency at notched bands. © 2015 Wiley Periodicals, Inc. Int J RF and Microwave CAE 25:795–806, 2015.     

Ultra‐wideband slot antenna for wireless communication systems

In this article, a new ultra‐wideband rectangular‐slot antenna is proposed and developed for multiband wireless communication systems. The radiating slot is fed by a microstrip line with a microstrip fork‐shaped tuning stub. The frequency characteristic and radiation performance of the proposed antenna are successfully optimized, and a prototype is fabricated and tested. The measured results show that the impedance bandwidth can cover the band from 1.85 to 6.1 GHz with return loss of better than 10 dB, and the corresponding radiation displays omnidirectional patterns across the interested bands. With these frequencies, the proposed structure is especially suitable for applications in wireless communication systems, where a single antenna is needed to operate simultaneously at different bands, such as PCS (1.85–1.99 GHz), UMTS (1.92–2.17 GHz) and all WLAN bands (2.4–2.48 GHz and IEEE802.11a WLAN applications at 5.15–5.35 GHz and 5.725–5.825 GHz). © 2006 Wiley Periodicals, Inc. Int J RF and Microwave CAE, 2006.     

Compact‐size linearly tapered slot antenna for portable ultra‐wideband imaging systems

A compact‐size asymmetrical linearly tapered slot antenna required for portable ultra‐wideband (UWB) imaging systems is presented. The total antenna size is reduced compared with the conventional linearly tapered slot antenna by using a triangular slot on the left‐hand side of the tapered‐shaped radiator, whereas introducing a corrugated pattern of cuts on the right side. The antenna operates over a wide bandwidth extending from 3.1 to 10.6 GHz with a maximum gain of 8.5 dBi. Stable radiation patterns are observed across the operational bandwidth, with cross‐polarization levels below ?20 dB. The realized antenna structure occupies a volume of 35 × 36 × 0.8 mm³, and possesses the essential time domain fidelity needed for UWB imaging applications. © 2012 Wiley Periodicals, Inc. Int J RF and Microwave CAE, 2013.     

Planar dual‐mode wideband antenna using short‐circuited‐strips loaded slotline radiator: Operation principle,design, and validation

A novel dual‐mode planar wideband slotline antenna is proposed. A pair of short‐circuited strips is symmetrically introduced along the slotline resonator near the nulls of electric field distribution of the second odd‐order resonant mode. In this way, two resonant modes are excited in a single slotline radiator and are both used for radiation in a wide frequency range. With the help of these paired strips, the dominant half‐wavelength mode can be gradually moved to the three halves‐wavelength mode, resulting to achieve a wideband radiation with two resonances. Prototype antennas are then fabricated to experimentally validate the principle and design approach of the proposed planar slotline antenna. It is shown that the proposed slotline antenna's impedance bandwidth could be effectively increased to 37.6% while keeping its inherent narrow slot configuration with length‐to‐width ratio (LWR) up to 42.00. © 2015 Wiley Periodicals, Inc. Int J RF and Microwave CAE 25:573–581, 2015.     

An SIW filtering antenna array with quasi‐elliptic gain response based on intercavity bypass coupling

In this article, a filtering antenna array based on substrate integrated waveguide (SIW) is proposed with quasi‐elliptic gain responses for the first time. Two radiation nulls in the gain responses at two sides of the frequency band edges are designed by applying a novel intercavity bypass coupling scheme. First, by carefully analyzing the bypass coupling between the in‐band and out‐of‐band modes in a single oversized TE₁₀₃ mode cavity resonator, quasi‐elliptic filtering responses are achieved for a two‐output filter. Afterward, those cavity resonators coupled with the two outputs are replaced by cavity‐backed slot antennas to achieve the proposed filtering cavity‐backed slot antenna array. Only one cavity is required in our design to achieve the two transmission zeros and the function of power divider. As a result, the complexity of the proposed filtering antenna array is reduced. A prototype operating at Ka band is designed, fabricated and measured with a center frequency of 28.5 GHz and fractional bandwidth of 1.25%. Similar characteristics can be observed between the gain response of the proposed filtering antenna and the transmission responses of the two‐output filter. The proposed SIW filtering antenna array has great potential to be integrated into millimeter‐wave transceiver modules. © 2015 Wiley Periodicals, Inc. Int J RF and Microwave CAE 26:191–198, 2016.     

A metasurface‐based wideband bidirectional same‐sense circularly polarized antenna

This article presents a wideband bidirectional same‐sense circularly polarized (CP) antenna based on metasurface structure. The antenna consists of a rectangular slot and two identical layers of periodic metallic plates as metasurfaces (MSs). The MS structure is formed by 16 unit cells of truncated‐corner patches arranged in 4 × 4 configuration. For bidirectional beam realization, the MSs are positioned on both the front and back sides of the primary radiating slot. In the proposed design, the MSs act as a polarization conversion structures, which convert the linearly polarized wave produced by the rectangular slot to the CP wave. The final antenna has a profile of 0.13λ _o and lateral dimensions of 0.86λ _o × 0.67λ _o at the center operating frequency. Measurements show that the proposed design radiates left‐hand CP radiation for both front and back directions over wide operating bandwidth of 14.3% (5.2‐6.0 GHz). In addition, the average gain value is about 4.2 dBi and the radiation efficiency is always better than 83% across the operating band. To the best of authors' knowledge, the proposed one shows a state‐of‐the‐art operating bandwidth in comparison with other reported designs.     

Annular‐ring slot antenna designs with circular polarization radiation

The design of a microstrip‐fed annular‐ring slot antenna (ARSA) with circular polarization (CP) radiation is initially studied. To obtain CP radiation with broad 3‐dB axial ratio (AR) bandwidth that can cover the WiMAX 2.3 GHz (2305–2320 MHz, 2345–2360 MHz) and WLAN 2.4 GHz (2400–2480 MHz) bands, a novel technique of extending an inverted L‐shaped slot from the bottom section of the annular‐ring is proposed. To suppress the harmonic modes induced by the CP ARSA, the technique of integrating a defected ground structure into the annular‐ring slot is further introduced. From the measured results, 10‐dB impedance bandwidth and 3‐dB AR bandwidth of 44.86 and 9.68% were achieved by the proposed harmonic suppressed CP ARSA. Furthermore, average gain and radiation efficiency of ～4.7 dBic and 71%, respectively, were also exhibited across the bands of interest. © 2014 Wiley Periodicals, Inc. Int J RF and Microwave CAE 25:337–345, 2015.     

A dipole‐type millimeter‐wave antenna with directional radiation characteristics

A dipole‐type millimeter‐wave (mm‐wave) antenna with directional radiation characteristics is presented. A radiating patch structure composed of a dipole‐type radiation patch and a rectangular‐shaped parasitic patch are initially investigated to achieve a wider bandwidth. To further improve the operating bandwidth and to realize a directional radiation characteristic, this radiating patch structure is top‐loaded above a conducting cavity‐backed ground structure, which has a low profile (thickness of 3 mm). The measured results show that the proposed mm‐wave antenna can achieve a wide 10‐dB bandwidth of 51.3% (29.6‐50.0 GHz) and stable gain across the desired frequency range. Furthermore, good directional characteristics over the entire mm‐wave frequency band with a compact antenna size of 0.64λ_40GHz × 0.91_λ40GHz × 0.43_λ40GHz are also realized. Hence, it is suitable for many small size wireless mm‐wave systems.     

Circular microstrip antenna with off‐centered Y‐slot

A novel dual‐frequency broadband design of a single‐layer single‐feed circular microstrip antenna with an off‐centered Y‐slot is demonstrated in this communication. By selecting a suitable location of the Y‐slot in the circle, the proposed antenna on glass epoxy FR‐4 substrate not only resonates efficiently at two closely spaced frequencies (2.736 and 2.868 GHz) but also offers improved bandwidth (210 MHz or 7.5%) in comparison with a conventional circular microstrip patch antenna (～2%). From the measured results, almost identical broadside radiation patterns are obtained at two resonant frequencies, and the variation of less than 1 dBi in gain values is achieved in the frequency range where broadband behavior is observed. © 2011 Wiley Periodicals, Inc. Int J RF and Microwave CAE, 2011.     

Computer-aided design of a CPW-fed slot antenna for MM-wave applications

This article presents a comprehensive parametric study with experimental characterization of an inductively coupled CPW-fed slot antenna on a GaAs substrate for MMIC applications. The length, width, and feed inset of the antenna are varied and their influences on the input impedance, bandwidth, and gain are investigated. The parametric study reveals that the slot length is the prime factor for determining the resonant frequency, while the width is used for fine-tuning of resonant frequency and gain-bandwidth product. For the fixed slot dimensions, the feed inset tremendously affects both resonant frequency and input match. The manufactured antenna resonates at 22.4 GHz with a 6.1% impedance bandwidth, 2% gain bandwidth, 2.5-dBi boresight gain, and 5-dB front-to-back (F/B) radiation level. The antenna exhibits bidirectional radiation patterns with almost omnidirectional patterns in the E-plane and a wide beamwidth of 84° 3-dB beam width in the H-plane. © 2003 Wiley Periodicals, Inc. Int J RF and Microwave CAE 14, 4–14, 2004     

A novel compact planar ultra‐wideband antenna with dual band‐notched characteristics

A novel planar ultrawideband monopole antenna with dual notched bands is presented. The antenna mainly consists of a radiation patch and a modified ground plane. To realize dual band‐notched characteristics, a U‐shaped stub embedded in the rectangular slot of the radiation patch and a novel coupled open‐/shorted‐circuit stub resonator are used on the backside of the substrate. The bandwidth of the dual notched bands can be controllable by adjusting some key parameters. The simulated and measured results indicate that the proposed antenna offers a very wide bandwidth from 2.6 to 18 GHz with Voltage Standing Wave Ratio (VSWR) < 2, except the dual notched bands of 3.3–3.7 GHz (World Interoperability for Microwave Access [WiMAX]) and 5.15–5.825 GHz (Wireless Local Area Network [WLAN]). Furthermore, good group delay and stable gains can be achieved over the operating frequencies. © 2014 Wiley Periodicals, Inc. Int J RF and Microwave CAE 25:48–55, 2015.     

Design and analysis of slot antenna with band notch function

In this article, the design, simulation, and construction of a novel wide rectangular slot antenna fed by a 50 Ω coplanar waveguide (CPW) are presented and investigated for multifunctional communication systems. The physical dimension of the antenna is 29 mm (length) × 32 mm (width) × 1.6 mm (thickness). Detailed simulations and experimental investigations are performed to understand its behavior and to optimize for 2.4 GHz wireless local area network (WLAN) and ultra wideband (UWB) operations. The proposed slot antenna is etched on an FR4 substrate with a thickness of 1.6 mm and relative permittivity of 4.4. To improve the impedance matching, a stepped stub structure with CPW feed technique is used. According to the measured results, the proposed antenna has a large bandwidth from 2.1 to 11.6 GHz for voltage standing wave ratio (VSWR) less than 2, totally satisfying the requirement of 2.4 GHz WLAN and UWB systems, while providing the required band notch function from 5.1 to 5.9 GHz. The study of time domain characteristics and surface current distributions also indicate the band‐notched function of the antenna. The radiation patterns display nearly omnidirectional performance and the antenna gain is stable except for the rejected frequency band (5.1–5.9 GHz). Moreover, group delays are within 1.5 ns except for the notch‐band. It is observed that the simulated and experimental results have good agreement with each other. © 2012 Wiley Periodicals, Inc. Int J RF and Microwave CAE, 2012.     

Slot line fed dual‐band dipole antenna for 2.4/5.2 GHz WLAN applications

A printed slot line fed dual‐band coplanar dipole antenna having a dimension of 0.40λ_g × 0.20λ_g suitable for both 2.4 and 5.2 GHz (IEEE 802.11 b/g and 802.11 a) WLAN application is presented. The structure comprises of a slot line fed symmetrical L strips to achieve dual‐band operation. Design equations of the antenna are developed and validated on different substrates. The simulation and experimental results show that the proposed antenna exhibits good impedance match, gain, and stable radiation patterns in both the frequency bands. © 2012 Wiley Periodicals, Inc. Int J RF and Microwave CAE , 2012.     

On the effect of ground‐plane thickness on an aperture‐coupled dielectric resonator antenna

A hemispherical dielectric resonator antenna excited by a microstrip feedline through a narrow slot in a thick ground plane is studied theoretically and experimentally. A numerical method based on a combination of the spectral Green's function, modal Green's function, and the method of moment is used to investigate the input characteristics of the dielectric resonator antenna system. The effects of ground‐plane thickness on input resistance, resonant frequency, and impedance bandwidth of the dielectric resonator antenna are discussed. © 2000 John Wiley & Sons, Inc. Int J RF and Microwave CAE 10: 271–277, 2000.     

Design and development of enhanced bandwidth multi‐frequency slotted antenna for 4G‐LTE/WiMAX/WLAN and S/C/X‐band applications

A multi‐frequency rectangular slot antenna for 4G‐LTE/WiMAX/WLAN and S/C/X‐bands applications is presented. The proposed antenna is comprised of rectangular slot, a pair of E‐shaped stubs, and an inverted T‐shaped stub and excited using staircase feed line. These employed structures help to achieve multiband resonance at four different frequency bands. The proposed multiband slot antenna is simulated, fabricated and tested experimentally. The experimental results show that the antenna resonates at 2.24, 4.2, 5.25, and 9.3 GHz with impedance bandwidth of 640 MHz (2.17‐2.82 GHz) covering WiMAX (802.16e), Space to Earth communications, 4G‐LTE, IEEE 802.11b/g WLAN systems defined for S‐band applications. Also the proposed antenna exhibits bandwidth of 280 MHz (4.1‐4.38 GHz) for Aeronautical and Radio navigation applications, 80 MHz (4.2‐4.28 GHz) for uncoordinated indoor systems,1060 MHz (5.04‐6.1 GHz) for the IEEE 802.11a WLAN system defined for C‐band applications and 2380 MHz (7.9‐10.28 GHz) defined for X‐band applications. Further, the radiation patterns for the designed antenna are measured in anechoic chamber and are found to agree well with simulated results.     

Dual‐band circularly polarized dielectric resonator antenna for wireless applications

This letter investigates an integrated antenna configuration for WLAN/WiMAX applications. The proposed composite antenna configuration is simply the grouping of ring dielectric resonator along with reformed square‐shaped slot antenna. Three significant characteristics of proposed article are: (1) aperture act as magnetic dipole and excite HE_11δ mode in ring dielectric resonator antenna; (2) reforming of square aperture generates orthogonal modes in ring DRA and creates CP in lower frequency band; (3) annular‐shaped Microstrip line along with reformed square aperture creates CP wave in upper frequency band. With the purpose of certifying the simulated outcomes, prototype of proposed structure is fabricated and tested. Good settlement is to be got between experimental and software generated outcome. Experimental outcomes show that the proposed radiating structure is operating over 2 frequency bands that is, 2.88‐3.72 and 5.4‐5.95 GHz. Measured 3‐dB axial ratio bandwidth in lower and upper frequency band is approximately 9.52% (3.0‐3.4 GHz) and 5.85% (5.64‐5.98 GHz), respectively. These outcomes indicate that the proposed composite antenna structure is appropriate for WLAN and WiMAX applications.     

Wideband cavity‐backed log‐periodic‐slot end‐fire antenna with vertical polarization for conformal application

A 6–18 GHz wideband cavity‐backed log‐periodic‐slot end‐fire antenna with vertical polarization for conformal application is presented. The log‐periodic folded slots and parasitic slots with 10 slot elements are applied to cover 6–18 GHz frequency band and the log‐periodic metallic cavity is placed under each slot element to keep wideband performance and prevent the effects of large metallic carrier on radiation patterns. The ground plane etched with log‐periodic slots is reversed and touched directly to the backed cavity and a dielectric cover is added to the antenna, to further improve the antenna performance. Meanwhile, a broadband microstrip‐coplanar waveguide transition is inserted in the antenna for measurements. With these designs, the proposed antenna shows good impedance matching (|S₁₁|<27 dB) and end‐fire gain (>4 dBi) performances in 6–18 GHz. The proposed antenna also keeps low‐profile and easy flush‐mounted characteristic which is suitable for conformal applications of high speed moving carriers.     

Design of high gain/directional ultra‐wideband antenna for radar imaging systems

A compact size of 40 × 40 mm² ( λ₀ × λ₀ ) semi‐elliptical slotted ground structure (SESGS) directional ultra‐wideband (UWB) antenna is proposed for radar imaging applications. A vertical semi‐elliptical slot is inserted into ground and subsequently, an axis of semi‐ellipse is rotated diagonally (with 45°) in direction of the substrate. Axes of semi‐ellipse are optimized symmetrically around the circular patch to work antenna as a reflector. Furthermore, semi‐elliptical slot is rotated horizontally (with 90°) again to improve the impedance bandwidth. Proposed antenna achieves fractional bandwidth around 83% covering the UWB frequency range from 4.40 to 10.60 GHz (S₁₁ < ?10 dB) having 4.5/6/7/8/9.3/10.2 GHz resonant frequencies. Also, antenna is capable to send low‐distortion Gaussian pulses with fidelity factor more than 95% in time‐domain. Measured gain and half power beam width (HPBW) are 6.1‐9.1 dBi and 44°‐29° in 4.40‐10.60 GHz band, respectively, which show an improvement of 1‐3 dBi in gain and half power beam‐width is reduced by 5°‐10° when compared with previously designed antennas. Experimental results show good agreement with CST simulation.     

Low‐cost broadband microstrip antenna array for 24 GHz FMCW radar applications

Two designs of microstrip antenna arrays consisting of eight radiating elements and operating within a broad frequency range having the center frequency of 24 GHz are presented. One of the proposed antenna arrays uses a single laminate layer with a ground plane on one side and radiating elements on the other side, the other one is a double layer structure, where the radiating elements with beam‐forming network are placed on the top layer and are fed with the use of the slot coupler. The application of U‐slot radiating elements with enlarged inner parasitic patch allows us to achieve reflection coefficient better than 10 dB within the assumed bandwidth of currently developed FMCW radars, which is 23–25 GHz frequency range. The theoretical analysis as well as experimental results of the manufactured 2 × 4 antenna arrays is shown. © 2013 Wiley Periodicals, Inc. Int J RF and Microwave CAE, 2013.