Synthesis and characterization of methyl methacrylate/styrene hyperbranched copolymers via living radical mechanism

Free‐radical copolymerizations of N,N‐diethylaminodithiocarbamoylmethylstyrene (inimer: DTCS) with a methyl methacrylate (MMA)/zinc chloride (ZnCl₂) complex were carried out under UV light irradiation. DTCS monomers play an important role in this copolymerization system as an inimer that is capable of initiating living radical polymerization of the vinyl group. The reactivity ratios (r₁ = 0.56 and r₂ = 0.52: DTCS [M₁]; MMA [M₂]) obtained for this copolymerization system were different from a corresponding model system (alternating copolymer) of a styrene and MMA/ZnCl₂ complex (r₁ = 0.25 and r₂ = 0.056). It was found that the hyperbranched copolymers produced exhibited a random branching structure. It was found that the Lewis acid ZnCl₂ formed the complex not only with MMA but also with the carbamate group of inimer. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 2490–2495, 2003     

Synthesis and solution properties of alternating maleimide/styrene hyperbranched copolymers via controlled radical mechanism

Copolymerizations of (N,N‐diethyldithiocarbamyl)methylstyrene (inimer: DTCS) with maleimide (MI) were carried out under UV irradiation. DTCS monomers play an important role in this copolymerization system as an inimer that is capable of initiating radical polymerization of the vinyl group. Reactivity ratios (r₁ = 0.15 and r₂ = 0) were estimated by the curve‐fitting procedure (DTCS [M₁]; MI[M₂]). These reactivities show strong alternation, and the propagating copolymer radicals proceed with homopolymerization of 1:1 complexes formed between the donor and acceptor monomers. These alternating copolymers exhibit highly branched structure and are actually hyperbranched copolymers. The compact nature of the hyperbranched molecules was demonstrated by comparison of their dilute‐solution properties with those of the linear analogues. The hyperbranched macromolecules behave as single, well‐separated molecules (even in good solvent) and as hard spheres. Copyright © 2003 Society of Chemical Industry     

Two‐dimensional regular nanopatterning on block copolymer substrate having lamellar morphology using star‐hyperbranched nanospheres by electrostatic interaction

Hyperbranched polystyrenes (PS) were prepared by living radical photopolymerization of 4‐vinylbenzyl N,N‐diethyldithiocarbamate as an inimer under UV irradiation. The star‐hyperbranched copolymers were derived by grafting from surface N,N‐diethyldithiocarbamate groups of hyperbranched macroinitiator with t‐butyl methacrylate in the presence of N,N‐tetraethylthiuram disulfide. We obtained poly(methacrylic acid) star‐hyperbranched PS nanospheres by hydrolysis of poly(t‐butyl methacrylate)‐grafted chains. We established two‐dimensional (2D) regular nanopatterning by aligning continuously such nanospheres on poly(2‐vinylpyridine) (P2VP) lamellar layers of PS‐block‐P2VP diblock copolymer film. Electrostatic interaction between nanosphere surface having negative charges (? COOCs) and P2VP lamellar layer acted effectively for the 2D nanopattern formation. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 4206–4210, 2006     

Novel synthesis of branched polystyrenes by quasi‐living radical copolymerization using photofunctional inimer

Branched polystyrenes were prepared by quasi‐living radical copolymerization of N,N‐diethylaminodithiocarbamoylmethylstyrene (inimer: DTCS) with styrene under UV irradiation. DTCS monomers play an important role in this copolymerization system as an inimer capable of initiating living radical polymerization of the vinyl group. Two monomers (DTCS and styrene) showed equal reactivity toward both propagating species, and the copolymer composition was the same as the comonomer feed. This result means that both the branching and chain length of the hyperbranched molecules can be controlled statistically by the feed monomer ratios. The compact nature of the branched macromolecules is demonstrated by viscosity measurements compared to the linear analogues. © 2001 Society of Chemical Industry     

Nano‐scaled ordering of hyperbranched and star‐hyperbranched polymers

Hyperbranched polystyrenes (HPS) were prepared by living radical polymerization of 4‐vinylbenzyl N,N‐diethyldithiocarbamate (VBDC) as an inimer under UV irradiation. These HPS exhibited large amounts of photofunctional diethyldithiocarbamate (DC) groups on their outside surfaces. We derived star‐HPS (SHPS) by grafting from such HPS macroinitiator with methyl methacrylate (MMA) or ethyl methacrylate (EMA). The ratios of radius of gyration to hydrodynamic radius R_g/R_h for HPS and SHPS in tetrahydrofuran (THF) were in the range of 0.74–0.90 and 1.05–1.12, respectively. HPS and SHPS behaved in a good solvent as hard and soft spheres, respectively. We demonstrated the structural ordering of both branched polymers in THF through small‐angle X‐ray scattering (SAXS), by varying the polymer concentration. As a result, HPS and SHPS formed face‐centered‐cubic (fcc) and body‐centered‐cubic (bcc) structures, respectively, near the overlap threshold (C*). © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 3340–3345, 2006     

Synthesis and characterization of hyperbranched poly(ethyl methacrylate) by quasi‐living radical polymerization of photofunctional inimer

The hyperbranched poly(ethyl methacrylate)s (PEMAs) were prepared by the quasi‐living radical polymerization of 2‐(N,N‐diethylaminodithiocarbamoyl)ethyl methacrylate (DTCM). DTCM monomer plays an important role in this polymerization system as an inimer that is capable of initiating quasi‐living radical polymerization of the vinyl group. Hyperbranched PEMAs with relatively narrow polydispersity ( M _w/ M _n ≈ 1.6) were obtained. The compact nature of the hyperbranched PEMAs is demonstrated by solution properties which are different from those of the linear analogues. © 2002 Society of Chemical Industry     

Novel synthesis of poly(methyl methacrylate) brush encapsulated silica particles

Silica (SiO₂)‐crosslinked polystyrene (PS) particles possessing photofunctional N,N‐diethyldithiocarbamate (DC) groups on their surface were prepared by the free‐radical emulsion copolymerization of a mixture of SiO₂ (diameter = 20 nm), styrene, divinyl benzene, 4‐vinylbenzyl N,N‐diethyldithiocarbamate (VBDC), and 2‐hydroxyethyl methacrylate with a radical initiator under UV irradiation. In this copolymerization, the inimer VBDC had the formation of a hyperbranched structure by a living radical mechanism. The particle sizes of such core–shell structures [number‐average particle diameter (D_n) = 35–40 nm] were controlled by the variation of the feed amounts of the monomers and surfactant, or emulsion system. The size distributions were relatively narrow (weight‐average particle diameter/D_n ≈ 1.05). These particles had DC groups on their surface. Subsequently, poly(methyl methacrylate) brush encapsulated SiO₂ particles were synthesized by the grafting from a photoinduced atom transfer radical polymerization approach of methyl methacrylate initiated by SiO₂‐crosslinked PS particles as a macroinitiator. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Hyperbranched–linear–hyperbranched ABA‐type block copolymers based on poly(ethylene oxide) and polyglycerol

BACKGROUND: Until recently, hyperbranched polymers were thought to be ill‐defined materials that were not useful as building blocks for well‐defined complex polymer architectures. It is a current challenge to develop strategies that offer rapid access to well‐defined hyperbranched block copolymers. RESULTS: A convenient three‐step protocol for the synthesis of double‐hydrophilic hyperbranched–linear–hyperbranched ABA‐type triblock copolymers based on poly(ethylene oxide) (PEO) and hyperbranched polyglycerol (hbPG) is presented. The Bola‐type polymers exhibiting an aliphatic polyether structure were prepared from a linear (lin) linPG‐b‐PEO‐b‐linPG precursor triblock. The materials exhibit low polydispersities (M_w/M_n) in the range 1.19–1.45. The molecular weights of the block copolymers range from 6300 to 26 200 g mol^?1, varying in the length of both the linear PEO chain as well as the hbPG segments. Detailed characterization of the thermal properties using differential scanning calorimetry demonstrates nanophase segregation of the blocks. CONCLUSION: The first example of well‐defined ABA hyperbranched–linear–hyperbranched triblock copolymers with PEO middle block and hbPG A‐blocks is presented. The biocompatible nature of the aliphatic polyether blocks renders these materials interesting for biomedical purposes. These new materials are also intriguing with respect to their supramolecular order and biomineralization properties. Copyright © 2009 Society of Chemical Industry     

Preparation of hyperbranched copolymers of maleimide inimer and styrene by ATRP

Novel hyperbranched copolymers were prepared by the atom transfer radical copolymerization of N-(4-α-bromobutyryloxy phenyl) maleimide (BBPMI) with styrene in 1-methyl-2-pyrrolidone (NMP) using the complex of CuBr/2,2′-bipyridine as catalyst. The copolymerization behavior was investigated by comparison of the conversion of double bond of BBPMI determined by ¹H NMR with that of styrene. The hyperbranched structure of resulting copolymers was verified by gel permeation chromatography (GPC) coupled with multi-angle laser light scattering (MALLS). The influences of dosage of catalyst and monomer ratio on the polymerization rate and structure of the resulting polymers were also investigated. The glass transition temperature of the resulting hyperbranched copolymer increases with increasing mole fraction of BBPMI, f_BBPMI. The resulting copolymers exhibit improved solubility in organic solvents; however, they show lower thermal stabilities than their linear analogues.     

Synthesis of well‐defined dendritic hyperbranched polymers by iterative methodologies using living/controlled polymerizations

This review presents firstly the synthesis of various dendritic hyperbranched polymers with well‐defined structures by generation‐based growth methodologies using living/controlled polymerization. Secondly, the synthesis of dendritic hyperbranched poly(methyl methacrylate)s (PMMAs) and their functionalized block copolymers using a novel iterative methodology is described. The methodology involves a two‐reaction sequence in each iterative process: (a) a linking reaction of α‐functionalized living anionic PMMA with tert‐butyldimethylsilyloxymethylphenyl (SMP) groups with benzyl bromide (BnBr)‐chain‐end‐functionalized polymer and (b) a transformation reaction of the SMP groups into BnBr functions. This reaction sequence is repeated several times to construct high‐generation (maximum seventh generation) dendritic hyperbranched polymers. Similar branched architectural block copolymers have also been synthesized by the same iterative methodology using other α‐functionalized living anionic polymers. Surface structures of the resulting dendritic hyperbranched block copolymers composed of PMMA and poly(2‐(perfluorobutyl)ethyl methacrylate) segments have been characterized using X‐ray photoelectron spectroscopy and contact angle measurements. Solution behaviors of dendritic hyperbranched PMMAs with different generations and branch densities are discussed based on their intrinsic viscosities, g′ values and R_h values. Copyright © 2007 Society of Chemical Industry     

Synthesis and properties of amphiphilic star block copolymers with star macroinitiators based on a one‐pot approach

Previously, star polystyrenes (PSs) have been prepared by atom transfer radical polymerization (ATRP) of N‐[2‐(2‐bromoisobutyryloxy)ethyl]maleimide (BiBEMI) with a large excess of styrene (St) in one pot. But linear PSs were also present during the formation of the star polymers. In the work reported here, we found that control of the formation of star polymers using a one‐pot approach can be improved by using a two‐step process. The polymerization was conducted first at a low temperature to form multifunctional cores by copolymerization of BiBEMI and St. Second, on increasing the temperature, homopolymerization of St occurred to grow PS arms. Then a series of amphiphilic star polystyrene‐block‐poly(acrylic acid)s, (S₁₄A_x)₁₆, were prepared by ATRP of tert‐butyl acrylate with the star PSs as macroinitiators, followed by selective acidolysis of the poly(tert‐butyl acrylate) blocks. Their micellization was studied using dynamic light scattering, which suggested that (S₁₄A₁₁₂)₁₆ amphiphilic star block copolymers could form unimolecular micelles in a basic aqueous solution. Then pyrene molecules were encapsulated using the (S₁₄A₁₁₂)₁₆ amphiphilic star copolymers and the loading capacity was investigated with UV and fluorescence spectroscopy. © 2013 Society of Chemical Industry     

Synthesis of multi‐arm star polystyrene with hyperbranched polyester initiators by atom transfer radical polymerization

Multi‐arm star polystyrenes with hyperbranched polyester (HP3) core were prepared by atom transfer radical polymerization (ATRP). The structures of the polymers were investigated with FTIR and ¹H NMR. GPC results showed that the resultant polymers had relatively broad polydispersity indices that arouse from the macromolecular initiator (HP3‐Br). The thermal properties were studied using differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA). DSC analysis indicated that polystyrene star polymers had only the glass transition temperatures (T_g), which changes with the weight ratio of multi‐functional macroinitiator‐to‐monomer. In addition, these star polymers could form the spherical micelles in the selected solvent (THF/n‐hexane). © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 99: 728–733, 2006     

Initiator‐fragment incorporation radical polymerization of diallyl phthalate: Kinetics,formation of hyperbranched polymer,and iridescent porous film thereof

Diallyl phthalate (DAP) was polymerized in toluene using dimethyl 2,2′‐azobisisobutyrate (MAIB) of high concentrations (0.1–0.9 mol/L) as initiator. The polymerization of DAP of 1.50 mol/L with MAIB of 0.50 mol/L proceeded homogeneously at 80°C without gelation to give soluble polymers in a high yield of 93%. Kinetic results of the homogeneous polymerization at 80°C suggest significant contributions of the degradative chain transfer and the primary radical termination as shown by the rate equation, R_p = k [MAIB]^0.8[DAP]^1.0 (R_p = polymerization rate). The polymer formed in the polymerization of DAP (1.30 mol/L) with MAIB (0.50 mol/L) at 80°C for 8 h consisted of the DAP units with (17 mol %) and without (47 mol %) double bond and the methoxycarbonylpropyl group (36 mol %) as MAIB‐fragment. The large fraction of the incorporated initiator‐fragment as terminal group indicates that the polymer has a hyperbranched structure. The film cast from a solution of the hyperbranched poly(DAP) in tetrahydrofuran showed an iridescent color. The confocal scanning laser microscope image of the film revealed that the iridescent film contained the pores of about 1 μm arranged in an ordered array. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 408–415, 2006     

Aliphatic polyamidoamine hyperbranched polymers/layered silicate nanocomposites

Polyamidoamine hyperbranched polymer (Hyp)/clay nanocomposites were synthesized by using both of montmorillonite and laponite clays. Poly amidoamine hyperbranched polymer (Hyp) was prepared by one‐pot polymerization via couple monomer methodology. Afterward, the amino ends of Hyp were modified with methyl methacrylate (MMA), styrene (St) and butyl methacrylate (n‐BuMA) polymers which were previously prepared via ATRP (atom transfer radical polymerization) to form the corresponding new hyperbranched polymers Hyp₁, Hyp₂ and Hyp₃. Those formed polymers were inserted into the modified clay, such as montmorillonite and laponite to form their nanocomposites. The formed polymer/clay nanocomposites were characterized via XRD, TEM, and thermal analyses. The formed hyperbranched polymers generally showed intercalation behavior more than the exfoliation one mostly because of the bulkiness of the hyperbranched skeleton. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Architecture of colloidal crystals constructed by silica hybrid nanoparticles

Silica (SiO₂)‐crosslinked polystyrene (PS) particles possessing photofunctional N,N‐diethyldithiocarbamate (DC) groups on their surface were prepared by the free‐radical emulsion copolymerization of a mixture of SiO₂ (diameter D_n = 192 nm), styrene, divinyl benzene, 4‐vinylbenzyl N,N‐diethyldithiocarbamate (VBDC), and 2‐hydroxyethyl methacrylate with a radical initiator under UV irradiation. In this copolymerization, the inimer VBDC had the formation of a hyperbranched structure by a living radical mechanism. These particles had DC groups on their surface. Subsequently, poly(methyl methacrylate) brushes encapsulated SiO₂ particles were synthesized by the grafting from a photoinduced atom transfer radical polymerization (ATRP) approach of methyl methacrylate initiated by SiO₂‐crosslinked PS particles as a macroinitiator. We constructed the colloidal crystals using these photofunctional particles. Moreover, the SiO₂ particle array of colloidal crystals was locked by radical photopolymerization with vinyl monomer as a matrix. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Synthesis and characterization of hyperbranched cationic polyelectrolytes via aqueous self‐condensing atom transfer radical polymerization

The hyperbranched cationic polyelectrolytes (PDMEAB) were directly prepared via the CuBr/ligand‐catalyzed (ligand = 2,2′‐bipyridine or pentamethyldiethylenetriamine) aqueous self‐condensing atom transfer radical polymerization (SCATRP) of a novel inimer, N,N‐dimethyl‐N‐(2‐methacryloyloxy)ethyl‐N‐(2‐bromoisobutyryloxy)ethyl ammonium bromide (DMEAB). Elemental analysis and nuclear magnetic resonance (NMR) spectroscopy confirmed the structure of DMEAB. The hyperbranched architecture and number‐average degree of polymerization (DP_n) of the PDMEAB was studied by ¹H‐ and ¹³C‐NMR. The kinetic results suggested that the DP_n of the hyperbranched PDMEAB grew gradually in the initial stage and exponentially in the later stage. The differential scanning calorimetry (DSC) showed that the glass transition temperature of the hyperbranched PDMEAB was much lower than that of the linear analogue. The solution rheometry showed that the aqueous PDMEAB solutions approximately underwent a Newtonian behavior and their shear viscosity maintained almost constant upon the addition of NaCl because of the spherical conformations of the hyperbranched cationic polyelectrolytes. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Architecture of prototype copolymer brushes composed of alternating structure and intramolecular phase separation of side chains in solution

Atom transfer radical polymerization (ATRP) was applied to the synthesis of prototype copolymer brushes composed polystyrene/poly(t‐butyl methacrylate) (PS/PBMA) alternating structure. Dilute solution properties of prototype copolymer brush were investigated by static and dynamic light scattering (SLS and DLS) in tetrahydrofuran (THF). As a result, such prototype copolymer brush composed of short aspect ratio formed a star‐like single molecule in THF. To discuss the intramolecular phase separation of PS/PBMA brushes in solution, we determined the radius of gyration (R_g) and cross‐sectional radius of gyration (R_g,c) of prototype copolymer brush by small‐angle X‐ray scattering (SAXS) using Guinier's plots in THF and styrene. We used styrene as solvent to cancel each other out with the electron density of PS side chains. Both R_g and R_g,c obtained in styrene decreased drastically compared with those obtained in THF. These results indicated strongly that PS and PBMA side chains of prototype brushes formed intramolecular phase separation even in good solvent. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Synthesis and conductivity performance of hyperbranched polymer electrolytes with terminal ionic groups

Hyperbranched polymer was synthesized from pentaerythritol (as the central core), 1,2,4‐trimellitic anhydride, and epichlorohydrin, and then hyperbranched polymer electrolytes with terminal ionic groups were prepared by the reaction of hyperbranched polymer with N‐methyl imidazole. The chemical structure, thermal behavior, and ionic conductive property of the hyperbranched polymer electrolytes were investigated by ¹H‐NMR, FTIR, differential scanning calorimetry, thermogravimetric analyzer, and complex impedance analysis, respectively. The ionic conductivity of hyperbranched polymer electrolyte was up to 2.4 × 10^?4 S cm^?1 at 30°C. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Formation of a soluble hyperbranched polymer via initiator–fragment incorporation radical copolymerization of divinyl adipate and isobutyl vinyl ether

The copolymerization of divinyl adipate (DVA) with isobutyl vinyl ether (IBVE) was conducted at 70 and 80 °C in benzene using azobisisobutyronitrile (AIBN), at a concentration as high as 0.50 mol l^?1 as the initiator, where the concentrations of DVA and IBVE were 0.40 and 0.60 mol l^?1, respectively. The copolymerization proceeded homogeneously, without any gelation, to yield soluble copolymers in spite of the high molar ratio of DVA as an excellent cross‐linker for IBVE. The copolymer yield increased with time, and the number‐average molecular weight (M_n = 0.9–2.4 × 10⁴ g mol^?1) from gel permeation chromatography (GPC) and molecular weight distribution (M_w/M_n = 1.5–7.6) of the resulting copolymer increased with copolymer yield. The cyanopropyl group, as a fragment of AIBN, was incorporated as a main constituent in the copolymer, the fraction of which increased from ca 10 to ca 20 % with copolymer yield, hence indicating that the copolymerization is an initiator–fragment incorporation radical polymerization. The copolymers also contained IBVE units (10–30 %) and DVA units with intact double bond (8–36 %) and without double bond (45 %). The intrinsic viscosity of the copolymer was very low (0.1 dl g^?1) at 30 °C in tetrahydrofuran. The results from GPC–multi‐angle laser light scattering (MALLS), transmission electron microscopy (TEM) and MALLS revealed that individual copolymer molecules were formed as hyperbranched nanoparticles. Copyright © 2004 Society of Chemical Industry     

Hyperbranched copolymers of p‐(chloromethyl)styrene and N‐cyclohexylmaleimide synthesized by atom transfer radical polymerization

The hyperbranched copolymers were obtained by the atom transfer radical copolymerization of p‐(chloromethyl)styrene (CMS) with N‐cyclohexylmaleimide (NCMI) catalyzed by CuCl/2,2′‐bipyridine (bpy) in cyclohexanone (C₆H₁₀O) or anisole (PhOCH₃) with CMS as the inimer. The influences of several factors, such as temperature, solvent, the concentration of CuCl and bpy, and monomer ratio, on the copolymerization were subsequently investigated. The apparent enthalpy of activation for the overall copolymerization was measured to be 37.2 kJ/mol. The fractional orders obtained in the copolymerization were approximately 0.843 and 0.447 for [CuCl]₀ and [bpy]₀, respectively. The monomer reactivity ratios were evaluated to be r_NCMI = 0.107 and r_CMS = 0.136. The glass transition temperature of the resultant hyperbranched copolymer increases with increasing f_NCMI, which indicates that the heat resistance of the copolymer has been improved by increasing NCMI. The prepared hyperbranched CMS/NCMI copolymers were used as macroinitiators for the solution polymerization of styrene to yield star‐shaped poly(CMS‐co‐NCMI)/polystyrene block copolymers by atom transfer radical polymerization. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 78: 1992–1997, 2000