Novel conjugated alternating copolymer based on 2,7-carbazole and 2,1,3-benzoselenadiazole

A novel conjugated alternating copolymer (PCzDBSe) based on N-9′-heptadecanyl-2,7-carbazole and 5,5-(4′,7′-di-2-thienyl-2′,1′,3′-benzoselenadiazole) was synthesized by Suzuki polycondensation. The polymer reveals excellent thermal stabilities with the decomposition temperature (5% weight loss) of 390 °C and the glass-transition temperature of 140 °C. The absorption peaks of the polymer are located at 412 and 626 nm, respectively, while the absorption onset is extended to 716 nm, which is 56 nm red-shifted as compared with its analogue, poly[N-9′-heptadecanyl-2,7-carbazole-alt-5,5-(4′,7′-di-2-thienyl-2′,1′,3′-benzothiadiazole)] (PCDTBT). The HOMO and LUMO levels of the polymer were estimated to be −5.28 and −3.55 eV, respectively, with an optical bandgap of 1.73 eV. The hole mobility of PCzDBSe as deduced from a solution-processed organic field effect transistor (OFET) was found to be 3.9 × 10⁻⁴ cm² V⁻¹ s⁻¹. Polymer solar cells (PSCs) based on the blends of PCzDBSe and [6,6]-phenyl-C₇₁-butyric acid methyl ester (PC₇₁BM) with a weight ratio of 1:4 were fabricated. Under AM 1.5 (AM, air mass), 100 mW cm⁻² illumination, the devices were found to have an open-circuit (V_oc) of 0.75 V, a short-circuit current density (J_sc) of 7.23 mA cm⁻², a fill factor (FF) of 45% and a power conversion efficiency (PCE) of 2.58%. The primary results indicate that 5,5-(4′,7′-di-2-thienyl-2′,1′,3′-benzoselenadiazole) is a promising unit for low bandgap polymer for polymer solar cells.     

Poly(thienylene-benzothiadiazole-thienylene-vinylene): A narrow bandgap polymer with broad absorption from visible to infrared region

Poly(thienylene-benzothiadiazole-thienylene-vinylene) (PTBTV) has been synthesized by Pd-catalyzed Stille-coupling method. The polymer shows broad absorption from visible to infrared region. The maximum absorption of PTBTV in solution and film state is at 600 nm and 614 nm, respectively. The absorption edge of PTBTV film is at 813 nm, indicating a narrow bandgap of 1.50 eV. The HOMO and LUMO energy levels of PTBTV are −4.99 eV and −3.49 eV, respectively. Polymer solar cell based on the blend of PTBTV as donor and [70] PCBM as acceptor was fabricated, the power conversion efficiency of the device is 0.51% under the illumination of AM1.5, 100 mW/cm².     

Synthesis, characterization and optical properties of cross-linkable poly(phthalazinone ether ketone sulfone)

Cross-linkable poly(phthalazinone ether ketone sulfone) bearing tetrafluorostyrene groups (PPEKS-FSt) has been prepared by copolycondensation reaction for optical waveguide applications. The resulting amorphous polymer exhibits good solubility in some common polar organic solvents (e.g., N,N′-dimethylacetamide, N-methyl-2-pyrrolidinone, chloroform) at room temperature, and can be easily spin-coated into thin films with good optical quality. The glass transition temperature (T_g) and the temperature of 1% weight loss (1% T_d) are 261 °C and 494 °C, respectively, which could be further increased by 31 °C and 14 °C upon thermal cross-linking. The cross-linked polymer thin films exhibit high refractive index (∼1.65, TE mode), high thermo-optic coefficient value (dn/dT) (−1.455 × 10⁻⁴/°C, TE mode), low optical loss (less than 0.24 dB/cm at 1310 nm) and relatively low birefringence (∼0.007).     

Synthesis and photoluminescent properties of polymer containing perylene and fluorene units

A new luminescent polymer, F-PTCD, with N,N′-bis-(propenylaniline)-3,4,9,10-perylene tetracarboxylic diimide-emitting segments (PTCD) and 9,9-diphenylfluorene (DIPT) was synthesized by Heck reaction. The structures were characterized by MS, EA, ¹H NMR, IR and the photoluminescent (PL) properties were investigated by UV/vis absorption and fluorescence emission spectra. The fluorescence quantum yield was 0.453 in acetone. Thermogravimetric analysis and differential scanning calorimetry showed that the polymer is thermal stable up to 569 °C with glass-transition temperature higher than 125 °C. They are yellow-red emitting materials with the band gap of 2.33 eV estimated from the onset absorption. In addition, the emission can be quenched by both electron donor (N,N-dimethylaniline) and electron acceptor (Fullerene), where the processes followed the Stern-Volmer equation. Furthermore, the interaction between F-PTCD and carbon nanotubes (CNTs) was also studied by fluorescent quenching.     

Synthesis, characterization, and optical properties of new metal complexes with the multi-sulfur 1,2-dithiolene ligand

Metal complexes containing a new multi-sulfur atom containing 1,2-dithiolene ligand, [4′,5′:5,6] [1,4] dithiino[2,3-b] quinoxaline-1′,3′-dithiolate, have been synthesized and characterized by electrochemical measurements, IR, UV-NIR and ESR spectroscopies. X-ray structure analysis reveals that the anions of the Ni-complex derived from the new ligand form a zig-zag chain along the b axis, and the anions of Au complex of the ligand stack along the a axis while the cations occupy the holes. The Ni-complex exhibits remarkable absorption at 1082 nm (? = 15?000 dm³ mol⁻¹ cm⁻¹) and good solubility that render this complex as a promising near-IR dye for Q-switching neodymium lasers. The third-order non-linear optical properties of the complexes are measured by the Z-scan technique with a 6.5 ns pulsed laser at 532 nm. The Au complexes exhibit non-linear optical absorptive abilities, while the non-linear absorption of the nickel complex is negligible. All of the complexes show effective self-defocusing performance. The third-order non-linear optical susceptibilities for the Au complexes have been determined to be of the order of 10⁻¹³ esu.     

High glass transition and thermal stability of new pyridine-containing polyimides: Effect of protonation on fluorescence

A new diamine monomer containing heterocyclic pyridine and triphenylamine groups, 4-(4,4′-diaminotriphenylamine)-2,6-bis(4-methylphenyl)pyridine (4), was synthesized by Chichibabin and nucleophilic fluoro-displacement reactions. The diamine was used to prepare a series of novel polyimides via polycondensation with various aromatic tetracarboxylic dianhydrides in N-methyl-2-pyrrolidinone. The polyimide 4a derived from the diamine 4 with 4,4′-hexafluoroisopropylidenediphthalic anhydride and having high T_g (313 °C), mechanical, and thermal properties was soluble in various organic solvents, such as N-methyl-2-pyrrolidinone, N,N-dimethylacetamide, N,N-dimethylformamide, pyridine, chloroform, tetrahydrofuran, at room temperature. The polyimide (4a) could be cast into a self-standing film from DMAc solution and was thermally converted into tough and flexible film. The film had high tensile modulus of 2.2 GPa and exhibited excellent thermal stability in both nitrogen and air (T_d¹⁰ > 550 °C). The pristine polymer exhibited the UV-vis absorption bands in the region 240-400 nm and protonated polymer exhibited absorption in the region 390-500 nm. The protonated polymer possessed strong orange fluorescence (around 600 nm) in THF solution after protonation with acids as excited at 438 nm. The fluorescent intensity was influenced by the acid concentrations and the chemical structure of conjugated bases. The fluorescent intensity at 600 nm increased as acid concentration from a lower to a moderate concentration and decreased at higher concentrations.     

A novel multichromic copolymer via electrochemical copolymerization of (S)-1,1′-binaphthyl-2,2′-diyl bis(N-(6-hexanoic acid-1-yl) pyrrole) and 3,4-ethylenedioxythiophene

Copolymer based on (S)-1,1′-binaphthyl-2,2′-diyl bis(N-(6-hexanoic acid-1-yl) pyrrole) (BPL) and 3,4-ethylenedioxythiophene (EDOT) is electrochemically synthesized and characterized. The comonomers exhibit relatively closer onset oxidation potentials, implying that the electrochemical copolymerization is relatively easy to be achieved. Electrochemical methods, FTIR, ¹H NMR and UV-vis analysis confirm that the resulting polymer is a copolymer rather than a blend or a composite of the respective homopolymers. Spectroelectrochemical analysis reveals that the copolymer film has distinct electrochromic properties from that of the BPL homopolymer film and shows six different colors under various potentials. At the neutral state of the copolymer, the π → π* transition absorption peak is located at 535 nm and E_g is calculated as 1.78 eV. The copolymer film shows a maximum optical contrast (ΔT%) of 31% and a switching time of 1.2 s which are higher and faster than those of the homopolymer of BPL (PBPL, 7.8% and 2 s). The new multichromic copolymer is thermally stable up to 345 °C and is electrochemically stable up to 1.39 V. SEM images illustrate that the copolymer film presents a much smoother surface than that of the respective homopolymers.     

A novel conjugated polymer based on cyclopenta[def]phenanthrene backbone with spiro group

Poly(2,6-(4,4-bis(2-ethylhexyl)-4H-cyclopenta[def]phenanthrene)) (PCPP) is a stable blue light emitting conjugated polymer even after annealing at 150 °C or operation of the device in air. The spiro form of PCPP, poly(2,6-(3′,6′-bis(2-ethylhexyloxy)-4,4′-spirobi(4H-cyclopenta[def]phenanthrene))) (spiro-PCPP), has been synthesized by Yamamoto polymerization. The PL emission spectrum of the polymer in THF solution shows a maximum peak at 398 nm, nearly identical with that of PCPP. The PL spectrum of the polymer in the solid state exhibits a maximum peak at 451 nm, which is red-shifted over 50 nm from that of the solution, due to the inter-chain interaction of the polymers. The PL spectra of spiro-PCPP in the mixture of THF and MeOH from 9:1 to 3:7 ratios showed increasing peaks at 458 and 484 nm. With an increased ratio of the hydrophilic solvent (MeOH), the inter-chain interaction of the hydrophobic polymers was enhanced to show peaks at 458 and 484 nm. This phenomenon has the same tendency as compared to the PL spectrum in solid thin film state. The polymer LED with the configuration of ITO/PEDOT/spiro-PCPP/Ca:Al emitted light with maximum peaks at around 463 nm. The emission color of the spiro-PCPP device is sky blue with the CIE coordinates of (0.14, 0.15), which are close to those of the standard blue (0.14, 0.08).     

A positive type alkaline developable thermally stable and photosensitive polymer based on partially O-methylated poly(2,6-dihydroxy-1,5-naphthylene), an acidolytic de-cross-linker, and a photoacid generator

A positive working and chemically amplified photosensitive polymer based on partially (30%) O-methylated poly(2,6-dihydroxy-1,5-naphthylene) [PMPDHN (30)], 1,3,5-tris[(2-vinyloxy)ethoxy]benzene (TVEB) as an acidolytic de-cross-linker, and a photoacid generator (5-propylsulfonyloxyimino-5H-thiophen-2-ylidene)-(2-methylphenyl)acetonitrile (PTMA) has been developed. Poly(2,6-dihydroxy-1,5-naphthylene) (PDHN) with a number-average molecular weight of 33,000 was prepared by oxidative coupling polymerization of 2,6-dihydroxynaphthalene (2,6-DHN) using di-μ-hydroxo-bis-[(N,N,N′,N′-tetramethylethylenediamine)copper(II)] chloride [CuCl(OH)TMEDA] as the catalyst in 2-methoxyethanol at room temperature. PDHN was converted to PMPDHN by treating with iodomethane. The resist showed a sensitivity of 19.4 mJ cm⁻² and a contrast of 7.5 when it was exposed to 436 nm light, followed by post-baking at 120 °C for 5 min and developing with 2.38 wt% aqueous tetramethylammonium hydroxide (TMAH) solution at 25 °C. A fine positive image featuring 6 μm line and space patterns was obtained on the film exposed to 20 mJ cm⁻² of UV-light at 436 nm by the contact-printed mode. The optically estimated dielectric constants (at 1 MHz) of PMPDHN (30) with and without TVEB and PTMA are 3.03 and 3.01, respectively. The moisture absorption (1.7 wt%) of the resist system based on PMPDHN (30) and TVEB is very low compared to that (4.3%) of the resist system consisting of PDHN and 4,4′-methylenebis[2,6-bis(hydroxymethyl)]phenol (MBHP).     

Synthesis and electroluminescence properties of a novel tetraphenylsilane-oxadiazole-diphenyl(para-tolyl)amine polymer

A novel triarylaminooxadiazole-containing tetraphenylsilane light-emitting polymer (PTOA) has been synthesized. Excellent thermal stability was observed due to the presence of a rigid tetraphenylsilane-based polymer backbone (T_g = 218 °C, T_d = 373 °C). In solution, PTOA shows photoluminescence (PL) with an emission maximum at 426 nm, which is attributed to the light-emitting unit of the triarylaminooxadiazole group. In solid film, the emission maximum of PL is observed at 458 nm, a 32 nm red-shift from the PL in solution. The solvatochromic effect and excimer formed in the solid film are responsible for the red-shifting and broadening of the PL emission band. The PL stability and morphology of the PTOA solid film were further investigated by thermal annealing at elevated temperatures. No significant difference in the PL spectra or morphology was observed between a pristine sample and a repeatedly thermally annealed film (at 200 °C). PTOA-based PLED shows EL with a main peak at 458 nm accompanied by a shoulder at around 530 nm. The light emission from electromer or electroplex leads to a broadening of the EL spectra (400-650 nm), which corresponds to the interaction between the oxadiazole and diphenyl(4-tolyl)amine groups in different polymer segments or chains. A sky blue emission (Commission Internationale de L'Eclairage (CIE_x,y) coordinates (0.20,0.23)) was obtained for PTOA-based PLED. The brightness and efficiency of the PLED can be as high as 248 cd/m² and 0.54 cd/A, respectively. The EL of PTOA-based PLED has been further improved by blending the PTOA with poly(n-vinylcarbazole) (PVK) in different concentrations. The effects of concentration on the PL and EL were studied for the PTOA-PVK composite film-based PLEDs.     

Novel red-emitting thieno-[3,4-b]-pyrazine derivatives suitable for vacuum evaporation and solution method to fabricate non-doped OLEDs

Two novel red-emitting thieno-[3,4-b]-pyrazine-cored molecules with phenyls (TP) or polyphenyls (Müllen type dendron, DTP) as peripheral groups were designed and synthesized. They have large Stokes shifts over 100 nm. DTP is thermally stable with decomposition temperature up to 458 °C. More importantly, it is amorphous with a remarkably high glass transition temperature of 262 °C. DTP can be made into thin films either by solution method or vacuum evaporation. Red OLEDs were fabricated using either spin coated or vacuum evaporated DTP film as emitting layer. The evaporated device exhibited a maximum brightness of 1753 cd m⁻² and a luminous efficiency of 0.74 cd A⁻¹, which are among the best data ever reported for thieno-[3,4-b]-pyrazine derivatives so far. In contrary, TP failed to produce satisfied red emission in its evaporated OLEDs.     

Polybenzimidazole containing benzimidazole side groups for high-temperature fuel cell applications

A polybenzimidazole (PBI) containing bulky basic benzimidazole side groups, poly[2,2′-(2-benzimidazole-p-phenylene)-5,5′-bibenzimidazole] (BIpPBI), was prepared via the condensation polymerization of 3,3′-diaminobenzidine tetrahydrochloride dihydrate with 2-benzimidazole terephthalic acid in PPA. BIpPBI was found to be soluble in aprotic polar solvents without the addition of inorganic salts, such as lithium chloride, and the BIpPBI film also showed very good acid retention capability as well as very high proton conductivity. The maximum acid content of the BIpPBI film was approximately 81 wt.% and the proton conductivity value of the acid-doped BIpPBI membrane was 0.16 S cm⁻¹ at 180 °C and a 0% relative humidity. For comparison, the maximum proton conductivity of the most commonly used polymer for the high-temperature fuel cell membrane, poly[2,2′-(m-phenylene)-5,5′-bibenzimidazole] (mPBI) membrane, is approximately 0.06 S·cm⁻¹ at 180 °C under anhydrous conditions at a 65 wt.% acid content, which is the maximum acid content that a mPBI membrane can have.     

Pure color and stable blue-light emission-alternating copolymer based on fluorene and dialkoxynaphthalene

A new blue-light emitting polymer that alternates between fluorene and alkoxynaphthalene structure has been developed. The fluorene and naphthalene units were highly distorted with an angle of 76.22° according to theoretical calculations. The obtained polymer has a weight average molecular weight of 273,800 with a polydispersity index of 2.35, good solubility and high thermal stability with a T_g of 176 °C. The film photoluminescence (PL) spectrum (405 nm) is consistent with that of solution and the PL spectra of the polymer did not show any peak in the long wavelength region even after annealing for 24 h at 100 °C. The double-layered device with an ITO/PEDOT/polymer/LiF/Al structure has a turn-on voltage of about 5.4 V, maximum brightness of 110 cd/m² and an electroluminescent efficiency of 0.09 cd/A. The OLED generates pure blue EL emission (λ_max = 405 nm) with excellent CIE coordinates (x = 0.15, y = 0.10) as well as stable blue EL emission that is not altered by voltage increase.     

Synthesis of novel sulfonated polybenzimidazole and preparation of cross-linked membranes for fuel cell application

A novel sulfonated polybenzimidazole, sulfonated poly[2,2′-(p-oxydiphenylene)-5,5′-bibenzimidazole] (SOPBI), was successfully prepared by post-sulfonation reaction of the parent polymer, poly[2,2′-(p-oxydiphenylene)-5,5′-bibenzimidazole] (OPBI), using concentrated and fuming sulfuric acid as the sulfonating reagent at 80 °C, and the degree of sulfonation (DS) could be regulated by controlling the reaction conditions. No significant polymer degradation was observed in the post-sulfonation processes. Direct polymerization of 4,4′-dicarboxydiphenyl ether-2,2′-disulfonic acid disodium salt (DCDPEDS) and 3,3′-diaminobenzidine (DABz), however, resulted in insoluble gels either in polyphosphoric acid (PPA) or in phosphorus pentoxide/methanesulfonic acid (PPMA) in a ratio of 1:10 by weight reaction medium. The SOPBIs prepared by the post-sulfonation method showed good solubility in dimethyl sulfoxide (DMSO), high thermal stability, good film forming ability and excellent mechanical properties. Cross-linked SOPBI membranes were successfully prepared by thermal treatment of phosphoric acid-doped SOPBI membranes at 180 °C in vacuo for 20 h and the resulting cross-linked membranes showed much improved water stability and radical oxidative stability in comparison with the corresponding uncross-linked ones, while the proton conductivity did not change largely. Highly proton conductive (150 mS cm⁻¹, 120 °C in water) and water stable SOPBI membrane was developed.     

Copolymers containing pendant styryltriphenylamine and carbazole groups: Synthesis, optical, electrochemical properties and its blend with Ir(ppy)3

A series of vinyl copolymers (PVKST12-PVKST91) and homoploymer PVST containing pendant hole-transporting 4-(4-oxystyryl)triphenylamine (12-100 mol%) and carbazole chromophores were synthesized by radical copolymerization and employed as host for Ir(ppy)₃ phosphor to tune emission color. They were characterized using the ¹H NMR, FT-IR, absorption and photoluminescence spectra, elemental analysis, GPC, cyclic voltammetric and thermal analysis (DSC, TGA). Their weight-average molecular weights (M_w) and decomposition temperatures (T_d) were 1.46-5.68 × 10⁴ and 356-399 °C, respectively. The HOMO levels of PVKST12-PVKST91 and PVST, estimated from the onset oxidation potentials in cyclic voltammograms, were −5.40 to −5.14 eV, which are much higher than −5.8 eV of the conventional host poly(9-vinylcarbazole) (PVK) owing to high hole-affinity of the 4-(4-oxystyryl)triphenylamine groups. Therefore, copolymers PVKST are effective in reducing hole-injection barrier between the PEDOT:PSS and emitting layer. Electroluminescent devices [ITO/PEDOT:PSS/PVKST:Ir(ppy)₃:PBD/BCP/Ca/Al] using the hole-transporting PVKST as host were fabricated to tune the emission color. Their EL spectra showed a major emission at 515 nm and a minor peak at 435 nm attributed to Ir(ppy)₃ and 4-(4-oxystyryl)triphenylamine, respectively. The C.I.E. 1931 coordinates shift from (0.29, 0.61) for PVK to (0.33, 0.42) for PVST with an increase in 4-(4-oxystyryl)triphenylamine content.     

Highly ion conductive flexible films composed of network polymers based on polymerizable ionic liquids

Ionic liquid-type polymer brushes having different hydrocarbon (HC) chain lengths between polymerizable group and imidazolium ring were synthesized. When the carbon number of HC chain was 6, the ionic liquid-type polymer brush exhibited the highest ionic conductivity of 1.37×10⁻⁴ S cm⁻¹ at 30 °C, reflecting low T_g of −60 °C. Moreover, for the first time, we succeeded in obtaining transparent and flexible films without considerable decrease in the ionic conductivity as compared with that of corresponding monomers by using suitable cross-linkers. The most ion conductive (1.1×10⁻⁴ S cm⁻¹ at 30 °C) film was obtained when tetra(ethylene glycol)diacrylate was used 0.5 mol% to ionic liquid monomer as the cross-linker. This film is one of excellent conductive films among single-ion conductive materials.     

Nanoscale fine-tuning of porosity of carbide-derived carbon prepared from molybdenum carbide

Micro- and mesoporous carbide-derived carbon (CDC) was synthesised from molybdenum carbide (Mo₂C) powder by gas phase chlorination in the temperature range from 400 to 1200 °C. Analysis of XRD results show that C(Mo₂C), chlorinated at 1200 °C, consist mainly on graphitic crystallites of mean size, L_a = 9 nm and L_c = 7.5 nm. The first-order Raman spectra showed the graphite-like absorption peak at ∼1587 cm⁻¹ and the disorder-induced (D) peak at ∼1348 cm⁻¹. The low-temperature N₂ adsorption experiments were performed and a specific surface area up to 1855 m² g⁻¹ and total pore volume up to 1.399 cm³ g⁻¹ were obtained. Sorption measurements showed the presence of both micro- and mesopores after chlorination at 400-900 °C and only mesopores after chlorination at 1000°-1200 °C. Stepwise formation of micro- and mesopores was achieved and the peak pore size can be shifted from 0.8 nm up to 4 nm by increasing the chlorination temperature.     

Poly(4-diphenylaminostyrene) with a well-defined polymer chain structure: Controllable optical and electrical properties

The effect of polymer chain structure on the optical and electrical properties are reported for poly(4-diphenylaminostyrene) (PDAS), which was prepared by the living anionic polymerization of 4-diphenylaminostyrene (DAS) with the benzyllithium (BzLi)/N,N,N′,N′-tetramethylethylenediamine (TMEDA) system. The optical properties of PDAS are strongly affected by the stereoregularity of the PDAS polymer chain; intramolecular excimer-forming fluorescence was observed from PDAS with a syndiotactic-rich configuration. The highest occupied molecular orbital (HOMO) and lowest unoccupied molecular orbital (LUMO) energy levels of PDAS were approximately −5.4 and −2.0 eV, respectively, regardless of the polymer chain structure. The hole and electron drift mobilities for PDAS were in the order of 10⁻⁴ to 10⁻⁵ (cm²/V s) and 10⁻⁵ (cm²/V s), respectively, with negative slopes. The distance of each triphenylamino (TPA) group in the polymer chain was a major factor influencing the drift mobility of PDAS. The current-voltage (I-V) characteristics of PDAS were controllable according to the polymer chain structure of PDAS.     

Synthesis and electrochemical characterization of bis(3,4-ethylene-dioxythiophene)-(4,4′-dinonyl-2,2′-bithiazole) comonomer

The synthesis and characterization of a novel donor acceptor donor type bis(3,4-ethylene-dioxythiophene)-(4,4′-dinonyl-2,2′-bithiazole) comonomer and its electrochemically prepared polymer on carbon fiber, Pt button and ITO plate is reported in this paper. Cyclic voltammetry of the polymer in 0.1 M Et₄NBF₄/CH₂Cl₂ exhibits a very well defined and reversible redox processes and this co-monomer can be either p-doped or n-doped. The half-wave oxidation potentials of the polymer (E_1/2) were observed at 0.303 and 0.814 V versus Ag/AgCl. The polymer is electrochromic; the onset for the π-π^* transition (E_g) of 1.75 eV with a λ_max at 2.15 eV and the homogeneous and high quality film of the polymer is stable of its optical properties offering fast switching time which is less than 0.25 s. The morphological studies reveal that the polymer was deposited as a continuous and very well adhering film to surface of the carbon fiber microelectrode. All these properties make this polymer favorable for use in electronic devices.