An on-line constraint softening strategy to guarantee the feasibility of dynamic controller in double-layered MPC

A double-layered model predictive control(MPC),which is composed of a steady-state target calculation(SSTC) layer and a dynamic control layer,is a prevailing hierarchical structure in industrial process control.Based on the reason analysis of the dynamic controller infeasibility,an on-line constraints softening strategy is given.At first,a series of regions of attraction(ROA)of the dynamic controller is calculated according to the softened constraints;then a minimal ROA containing the current state is chosen and the corresponding softened constraint is adopted by the dynamic controller.Note that,the above measures are performed on-line because the centers of the above ROA are the steady-state targets calculated at each instant.The effectiveness of the presented strategy is illustrat-ed through two examples.     

流化床反应器中气相丙烯聚合反应的动力学和预测控制(英文)

A two-phase dynamic model, describing gas phase propylene polymerization in a fluidized bed reactor, was used to explore the dynamic behavior and process control of the polypropylene production rate and reactor temperature. The open loop analysis revealed the nonlinear behavior of the polypropylene fluidized bed reactor, jus- tifying the use of an advanced control algorithm for efficient control of the process variables. In this case, a central- ized model predictive control （MPC） technique was implemented to control the polypropylene production rate and reactor temperature by manipulating the catalyst feed rate and cooling water flow rate respectively. The corre- sponding MPC controller was able to track changes in the setpoint smoothly for the reactor temperature and pro- duction rate while the setpoint tracking of the conventional proportional-integral （PI） controller was oscillatory with overshoots and obvious interaction between the reactor temperature and production rate loops. The MPC was able to produce controller moves which not only were well within the specified input constraints for both control vari- ables, but also non-aggressive and sufficiently smooth for practical implementations. Furthermore, the closed loop dynamic simulations indicated that the speed of rejecting the process disturbances for the MPC controller were also acceotable for both controlled variables.     

基于改进DOB的矿物研磨过程最优运行先进反馈控制(英文)

Advanced feedback control for optimal operation of mineral grinding process is usually based on the model predictive control (MPC) dynamic optimization. Since the MPC does not handle disturbances directly by controller design, it cannot achieve satisfactory effects in controlling complex grinding processes in the presence of strong disturbances and large uncertainties. In this paper, an improved disturbance observer (DOB) based MPC advanced feedback control is proposed to control the multivariable grinding operation. The improved DOB is based on the optimal achievable H 2 performance and can deal with disturbance observation for the nonminimum-phase delay systems. In this DOB-MPC advanced feedback control, the higher-level optimizer computes the optimal operation points by maximize the profit function and passes them to the MPC level. The MPC acts as a presetting controller and is employed to generate proper pre-setpoint for the lower-level basic feedback control system. The DOB acts as a compensator and improves the operation performance by dynamically compensating the setpoints for the basic control system according to the observed various disturbances and plant uncertainties. Several simulations are performed to demonstrate the proposed control method for grinding process operation.     

设计余量对运行优化和化学过程控制性能的影响简

Operation optimization is an effective method to explore potential economic benefits for existing plants. The m.aximum potential benefit from operationoptimization is determined by the distances between current operating point and process constraints, which is related to the margins of design variables. Because of various ciisturbances in chemical processes, some distances must be reserved for fluctuations of process variables and the optimum operating point is not on some process constraints. Thus the benefit of steady-state optimization can not be fully achied（ed while that of dynamic optimization can be really achieved. In this study, the steady-state optimizationand dynamic optimization are used, and the potential benefit-is divided into achievable benefit for profit and unachievable benefit for control. The fluid catalytic cracking unit （FCCU） is used for case study. With the analysis on how the margins of design variables influence the economic benefit and control performance, the bottlenecks of process design are found and appropriate control structure can be selected.     

采用同步策略的化工动态优化求解(英文)

An approach of simultaneous strategies with two novel techniques is proposed to improve the solution accuracy of chemical dynamic optimization problems. The first technique is to handle constraints on control variables based on the finite-element collocation so as to control the approximation error for discrete optimal problems, where a set of control constraints at element knots are integrated with the procedure for optimization leading to a significant gain in the accuracy of the simultaneous strategies. The second technique is to make the mesh refinement more feasible and reliable by introducing length constraints and guideline in designing appropriate element length boundaries, so that the proposed approach becomes more efficient in adjusting elements to track optimal control profile breakpoints and ensure accurate state and control profiles. Four classic benchmarks of dynamic optimization problems are used as illustrations, and the proposed approach is compared with literature reports. The research results reveal that the proposed approach is preferable in improving the solution accuracy of chemical dynamic optimization problem.     

An LMI Method to Robust Iterative Learning Fault-tolerant Guaranteed Cost Control for Batch Processes

Based on an equivalent two-dimensional Fornasini-Marchsini model for a batch process in industry, a closed-loop robust iterative learning fault-tolerant guaranteed cost control scheme is proposed for batch processes with actuator failures. This paper introduces relevant concepts of the fault-tolerant guaranteed cost control and formulates the robust iterative learning reliable guaranteed cost controller （ILRGCC）. A significant advantage is that the proposed ILRGCC design method can be used for on-line optimization against batch-to-batch process uncertainties to realize robust tracking of set-point trajectory in time and batch-to-batch sequences. For the convenience of implementation, only measured output errors of current and previous cycles are used to design a synthetic controller for iterative learning control, consisting of dynamic output feedback plus feed-forward control. The proposed controller can not only guarantee the closed-loop convergency along time and cycle sequences but also satisfy the H∞ performance level and a cost function with upper bounds for all admissible uncertainties and any actuator failures. Sufficient conditions for the controller solution are derived in terms of linear matrix inequalities （LMIs）, and design procedures, which formulate a convex optimization problem with LMI constraints, are presented. An example of injection molding is given to illustrate the effectiveness and advantages of the ILRGCC design approach.     

Design and control of methyl acetate-methanol separation via heat-integrated pressure-swing distillation

Design and control of pressure-swing distil ation (PSD) with different heat integration modes for the separation of methyl acetate/methanol azeotrope are explored using Aspen Plus and Aspen Dynamics. First, an optimum steady-state separation configuration conditions are obtained via taking the total annual cost (TAC) or total reboiler heat duty as the objective functions. The results show that about 27.68%and 25.40%saving in TAC can be achieved by the PSD with full and partial heat integration compared to PSD without heat integration. Second, temperature control tray locations are obtained according to the sensitivity criterion and singular value decom-position (SVD) analysis and the single-end control structure is effective based on the feed composition sensitivity analysis. Final y, the comparison of dynamic controllability is made among various control structures for PSD with partial and full heat integration. It is shown that both control structures of composition/temperature cascade and pressure-compensated temperature have a good dynamic response performance for PSD with heat integration facing feed flowrate and composition disturbances. However, PSD with full heat integration performs the poor control ability despite of a little bit of economy.     

一种对预测控制系统经济性能评估的实用方法及其工业应用

In this article, an approach for economic performance assessment of model predictive control (MPC) system is presented. The method builds on steady-state economic optimization techniques and uses the linear quadratic Gaussian (LQG) benchmark other than conventional minimum variance control (MVC) to estimate the potential of reduction in variance. The LQG control is a more practical performance benchmark compared to MVC for performance assessment since it considers input variance and output variance, and it thus provides a desired basis for determining the theoretical maximum economic benefit potential arising from variability reduction. Combining the LQG benchmark directly with benefit potential of MPC control system, both the economic benefit and the op-timal operation condition can be obtained by solving the economic optimization problem. The proposed algorithm is illustrated by simulated example as well as application to economic performance assessment of an industrial model predictive control system.     

混杂系统基于参数规划的状态反馈预测控制

In this article, state feedback predictive controller for hybrid system via parametric programming is proposed. First, mixed logic dynamic （MLD） modeling mechanism for hybrid system is analyzed, which has a distinguished advantage to deal with the logic rules and constraints of a plant. Model predictive control algorithm with moving horizon state estimator （MHE） is presented. The estimator is adopted to estimate the current state of the plant with process disturbance and measurement noise, and the state estimated are utilized in the predictive controller for both regulation and tracking problems of the hybrid system based on MLD model. Off-line parametric programming is adopted and then on-line mixed integer programming problem can be treated as the parameter programming with estimated state as the parameters. A three tank system is used for computer simulation, results show that the proposed MHE based predictive control via parametric programming is effective for hybrid system with model/olant mismatch, and has a potential for the engineering applications.     

基于模型预测控制的部分分散控制系统设计(英文)

An expansion procedure to design partially decentralized controllers via model predictive control is proposed in this paper. Partially decentralized control is a control structure that lies between a fully decentralized structure and a fully centralized one, and has the advantage of achieving comparable performance as a fully centralized controller but with simpler structure. The proposed method follows the expansion method proposed in a previous paper where internal model control (IMC) was used to design controllers for non-square subsystems. The method requires computing the pseudo-inverse of a non-square matrix via pseudo-inverse factors. Instead, the proposed method uses dynamic matrix control (DMC) to design PID controllers for non-square subsystems without using additional factors. The effectiveness of the proposed method is demonstrated on several chemical examples. Simulation results show that the proposed method is simple and can achieve better performance.     

循环流化床燃烧系统无终端约束字典序经济预测控制

针对循环流化床锅炉(CFBB)燃烧系统非线性、约束、多变量耦合等过程特性和多目标燃烧优化要求,提出一种无终端约束字典序经济模型预测控制策略。基于字典序多目标优化思想,将CFBB稳定燃烧工况作为最重要控制目标,将燃烧系统经济性能作为次重要目标,构建分层滚动时域优化控制问题。设计关于稳定燃烧性能指标的终端域条件,建立无显式终端约束的稳定字典序经济模型预测控制策略。这不仅降低了多目标燃烧控制器的在线计算量,同时并行实现CFBB燃烧系统的稳定控制和经济性能优化。最后通过仿真对比验证本文提出方法的有效性。     

Predictive control of transport-reaction processes

This work focuses on the development of computationally efficient predictive control algorithms for nonlinear parabolic and hyperbolic PDEs with state and control constraints arising in the context of transport-reaction processes. We first consider a diffusion-reaction process described by a nonlinear parabolic PDE and address the problem of stabilization of an unstable steady-state subject to input and state constraints. Galerkin’s method is used to derive finite-dimensional systems that capture the dominant dynamics of the parabolic PDE, which are subsequently used for controller design. Various model predictive control (MPC) formulations are constructed on the basis of the finite dimensional approximations and are demonstrated, through simulation, to achieve the control objectives. We then consider a convection-reaction process example described by a set of hyperbolic PDEs and address the problem of stabilization of the desired steady-state subject to input and state constraints, in the presence of disturbances. An easily implementable predictive controller based on a finite dimensional approximation of the PDE obtained by the finite difference method is derived and demonstrated, via simulation, to achieve the control objective.     

化工过程预测控制的在线优化实现机制

多层结构的预测控制已逐渐成为工业过程控制领域的主流控制方案。在此控制架构基础上,根据操作工或工艺优化所给定期望值的不同,将稳态优化问题具体化为两种基本情况,并对此提出基于复合目标函数的优化问题,可针对不同过程要求退化为线性、二次或二者兼有的优化问题形式。为保证最优目标的可行性并在一定程度上避免关键变量饱和,对不可行的期望值适当调整。将所得最优目标增量化处理后送入模型预测控制动态控制层,确保了上下层之间变量传递的一致性。包含约束的全混槽反应器系统仿真实例表明,流程的优化实现层可针对不同的过程要求有效给出最优目标以便动态控制,说明了该优化流程的可行性。     

Predictive control of transport-reaction processes

This work focuses on the development of computationally efficient predictive control algorithms for nonlinear parabolic and hyperbolic PDEs with state and control constraints arising in the context of transport-reaction processes. We first consider a diffusion-reaction process described by a nonlinear parabolic PDE and address the problem of stabilization of an unstable steady-state subject to input and state constraints. Galerkin’s method is used to derive finite-dimensional systems that capture the dominant dynamics of the parabolic PDE, which are subsequently used for controller design. Various model predictive control (MPC) formulations are constructed on the basis of the finite dimensional approximations and are demonstrated, through simulation, to achieve the control objectives. We then consider a convection-reaction process example described by a set of hyperbolic PDEs and address the problem of stabilization of the desired steady-state subject to input and state constraints, in the presence of disturbances. An easily implementable predictive controller based on a finite dimensional approximation of the PDE obtained by the finite difference method is derived and demonstrated, via simulation, to achieve the control objective.     

Inferential Control of Reactive Destillation Columns – An Algorithmic Approach

Decentralized control system design comprises the selection of a suitable control structure and controller parameters. Here, mixed integer optimization is used to determine the optimal control structure and the optimal controller parameters simultaneously. The process dynamics is included explicitly into the constraints using a rigorous nonlinear dynamic process model. Depending on the objective function, which is used for the evaluation of competing control systems, two different formulations are proposed which lead to mixed‐integer dynamic optimization (MIDO) problems. A MIDO solution strategy based on the sequential approach is adopted in the present paper. Here, the MIDO problem is decomposed into a series of nonlinear programming (NLP) subproblems (dynamic optimization) where the binary variables are fixed, and mixed‐integer linear programming (MILP) master problems which determine a new binary configuration for the next NLP subproblem. The proposed methodology is applied to inferential control of reactive distillation columns as a challenging benchmark problem for chemical process control.     

Predictive control of particle size distribution in particulate processes

In this work, we focus on the development and application of predictive-based strategies for control of particle size distribution (PSD) in continuous and batch particulate processes described by population balance models (PBMs). The control algorithms are designed on the basis of reduced-order models, utilize measurements of principle moments of the PSD, and are tailored to address different control objectives for the continuous and batch processes. For continuous particulate processes, we develop a hybrid predictive control strategy to stabilize a continuous crystallizer at an open-loop unstable steady-state. The hybrid predictive control strategy employs logic-based switching between model predictive control (MPC) and a fall-back bounded controller with a well-defined stability region. The strategy is shown to provide a safety net for the implementation of MPC algorithms with guaranteed stability closed-loop region. For batch particulate processes, the control objective is to achieve a final PSD with desired characteristics subject to both manipulated input and product quality constraints. An optimization-based predictive control strategy that incorporates these constraints explicitly in the controller design is formulated and applied to a seeded batch crystallizer. The strategy is shown to be able to reduce the total volume of the fines by 13.4% compared to a linear cooling strategy, and is shown to be robust with respect to modeling errors.     

Application of state estimation based NMPC to an unstable nonlinear process

Model predictive control (MPC) has become very popular both in process industry and academia due to its effectiveness in dealing with nonlinear, multivariable and/or hard-constrained plants.Although linear MPC can be applied for controlling nonlinear processes by obtaining a linearized model of the plant, this is only valid in a limited region. Therefore, a substantial improvement can be achieved by using the whole knowledge of the process dynamics, specially in the presence of marked nonlinearities. This effect can be strong if the process to control is open-loop unstable.The purpose of this paper is to introduce a nonlinear model predictive controller (NMPC) based on nonlinear state estimation, in order to exploit the knowledge of the nonlinear dynamics and to avoid modeling simplifications or linearization.A state-space formulation is proposed to achieve the control objective. To update the optimization involved in NMPC strategy, state estimation based on the measured outputs is proposed.As a particular application, we consider an open-loop unstable jacketed exothermic chemical reactor. This CSTR is widely recognized as a difficult problem for the purpose of control. In order to achieve the control goal, a NMPController coupled with a state observer are designed. The observer is also used to estimate some unmeasured disturbances. Finally, computer simulations are developed for showing the performance of both the nonlinear observer and the control strategy.     

A robustly stabilizing fault-tolerant MPC: A performance improvement-based approach

In terms of model predictive control (MPC) performance degradation caused by operational faults, in this article, a robust MPC strategy with active fault tolerance properties is proposed. The proposed strategy incorporates a fault supervision layer into the structure of conventional cost-contracting formulation-based robust MPC for the online update of the nominal controller model in the event of faults. The robust MPC is based on multiplant uncertainty, while the supervisory layer consists of a bank of unknown input observers and a decision-making algorithm. Simulation results in a nonlinear polymerization reactor subject to process faults demonstrate that the proposed approach offers superior performance compared to the conventional strategy.     

从区间模型预测控制到双层结构模型预测控制

模型预测控制算法（MPC）存在设定点控制与区间控制两种策略,区间预测控制较之设定点控制在技术上具有先进性。目前,主流的预测控制软件技术均采用双层结构,即上层稳态优化计算最优设定点,下层动态控制负责动态跟踪最优设定点。从过程稳态的角度出发,分别对区间预测控制和双层结构预测控制进行了机理分析,从定性与定量两个方面比较了这两者的异同点,提出并证明了两者的一致性条件。论述了双层结构预测控制较之单层结构下的区间控制更具先进性。