Synthesis of hydroxyl‐terminated copolymer of styrene and 4‐vinylpyridine via nitroxide‐mediated living radical polymerization

The random copolymers of styrene (St) and 4‐vinylpyridine (4‐VP) with hydroxyl end group and low polydispersities were synthesized by nitroxide‐mediated living radical polymerization initiated by azobisisobutyronitrile (AIBN) and 4‐hydroxyl‐2,2,6,6–tetramethylpiperidine‐oxyl (TEMPO‐OH). The experimental results have shown that all synthesized copolymers have narrow molecular weight distribution. The conversion of monomers and the molecular weight of copolymer increased with polymerization time. The copolymerization rate is affected by molar ratios of HTEMPO to AIBN. ¹H‐Nuclear magnetic resonance spectra shows that one end of copolymers was capped by TEMPO‐OH moiety. The use of this method permits the copolymer with hydroxyl chain end and controllable molecular weight and molecular weight distribution. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 91: 1842–1847, 2004     

Synthesis of new open‐chain alkoxyamines and their evaluation for nitroxide‐mediated radical polymerization

New readily available open‐chain alkoxyamines have been synthesized and evaluated as unimolecular initiators for nitroxide‐mediated radical polymerization of styrene and n‐butyl acrylate. The observed moderate control of polymerization is explained by the low thermostability of the parent nitroxide. Copyright © 2004 Society of Chemical Industry     

Fabrication and characterization of tunable wettability surface on copper substrate by poly(ionic liquid) modification via surface‐initiated nitroxide‐mediated radical polymerization

Poly(ionic liquid) surfaces with tunable wettability were successfully prepared on micro/nanoscale CuO/Cu composite substrates by a surface‐initiated nitroxide‐mediated radical polymerization technique. Various characterization techniques including X‐ray photoelectron spectroscopy, cold field emission scanning electron microscopy, and static water contact angle measurement were used to characterize the surfaces for each surface modification step. Kinetic studies revealed that the polymer chain growth from the surface was a controlled/“living” polymerization process. The surface with tunable wettability, reversible switching between hydrophilicity and hydrophobicity can be easily achieved by sequential counteranion exchange. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

A replicated investigation of nitroxide‐mediated radical polymerization of styrene over a range of reaction conditions

A comprehensive experimental investigation of nitroxide‐mediated radical polymerization (NMRP) of styrene using 2,2,6,6‐tetramethyl‐1‐piperidinyloxy (TEMPO) as controller is presented. Polymerizations with a bimolecular initiator (benzoyl peroxide; BPO) were carried out at 120 and 130°C, with TEMPO/BPO molar ratios ranging from 0.9 to 1.5. Results indicate that increasing temperature increases the rate of polymerization while the decrease in molecular weights is only slight. It was also observed that increasing the ratio of TEMPO/BPO decreased both the rate of polymerization and molecular weights. Probably for the first time in the history of such investigations, the paper contains a comprehensive database, appropriate for parameter estimation in aid of future modelling studies, since it comes from a systematic data collection containing independent replication.     

Synthesis and characterization of polystyrene/poly(4‐vinylpyridine) triblock copolymers by reversible addition–fragmentation chain transfer polymerization and their self‐assembled aggregates in water

Reversible addition–fragmentation chain transfer polymerization (RAFT) was developed for the controlled preparation of polystyrene (PS)/poly(4‐vinylpyridine) (P4VP) triblock copolymers. First, PS and P4VP homopolymers were prepared using dibenzyl trithiocarbonate as the chain transfer agent (CTA). Then, PS‐b‐P4VP‐b‐PS and P4VP‐b‐PS‐b‐P4VP triblock copolymers were synthesized using as macro‐CTA the obtained homopolymers PS and P4VP, respectively. The synthesized polymers had relatively narrower molecular weight distributions (M_w/M_n < 1.25), and the polymerization was controlled/living. Furthermore, the polymerization rate appeared to be lower when styrene was polymerized using P4VP as the macro‐CTA, compared with polymerizing 4‐vinylpyridine using PS as the macro‐CTA. This was attributed to the different transfer constants of the P4VP and PS macro‐CTAs to the styrene and the 4‐vinylpyridine, respectively. The aggregates of the triblock copolymers with different compositions and chain architectures in water also were investigated, and the results are presented. Reducing the P4VP block length and keeping the PS block constant favored the formation of rod aggregates. Moreover, the chain architecture in which the P4VP block was in the middle of the copolymer chain was rather favorable to the rod assembly because of the entropic penalty associated with the looping of the middle‐block P4VP to form the aggregate corona and tailing of the end‐block PS into the core of the aggregates. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 1017–1025, 2003     

Photo‐induced controlled radical polymerization of methyl methacrylate mediated by photosensitive nitroxides

Photosensitive nitroxides bearing different chromophore groups (benzophenone, naphthalene and quinoline) were synthesized and characterized. The photochemical properties of the synthesized products were investigated by UV?visible and fluorescence measurements. The results indicated that an efficient energy transfer from the chromophore moiety to the nitroxide radical moiety could occur within the molecular distances. The photo‐induced nitroxide‐mediated polymerization of methyl methacrylate (MMA) was performed using the photosensitive nitroxide/2,2‐dimethoxy‐2‐phenyl acetophenone as a bimolecular mediated system. The controlled character of the polymerization was confirmed by the linear tendency of molecular weight evolution with narrow molecular weight distribution (1.3?1.4). The experimental conditions, such as type of chromophore, initiator concentration and molar ratio of initiator/nitroxide, are discussed for a better understanding of the mechanism of the controlled polymerization. Using the polymerization products as macroinitiator, the chain extension reaction of MMA turned out to be able to re‐initiate further polymerization of the monomer. © 2014 Society of Chemical Industry     

Controlled radical double ring‐opening polymerization of 2‐methylene‐1,4,6‐trioxaspiro[4,4]nonane

Controlled radical double ring‐opening polymerization of 2‐methylene‐1,4,6‐trioxaspiro[4,4]nonane (MTN) has been achieved with tert‐butyl perbenzoate (TBPB) as initiator in the presence of 2,2,6,6‐tetramethyl‐1‐piperidinyloxy free radical (TEMPO) at 125 °C. The molecular weight polydispersity of the polymers is obviously lower than that of polymers obtained by conventional procedures. As the [TEMPO]/[TBPB] molar ratio increased, the polydispersity decreased and a polydisperty as low as 1.2 was obtained at high TEMPO concentration. With the conversion of the monomer increasing, the molecular weight of the polymers turned higher and a linear relationship between the M_w and the monomer conversion was observed. The monomer conversion, however, did not exceed 30 %. © 2000 Society of Chemical Industry     

Surface‐initiated atom transfer radical polymerization of regenerated cellulose membranes with thermo‐responsive properties

Using atom transfer radical polymerization (ATRP), thermo‐responsive regenerated cellulose membranes were synthesized. Regenerated cellulose membranes were firstly modified by reacting the hydroxyl groups on the surface with 2‐bromoisobutyryl bromide, followed by grafting with poly(N‐isopropylacrylamide). The membranes had obvious thermally modulated permeability properties. Analysis was carried out by means of X‐ray photoelectron spectroscopy, attenuated total reflection Fourier transform infrared spectroscopy, scanning electron microscopy and thermogravimetric analysis. The results showed that N‐isopropylacrylamide had been grafted successfully on the surface of the regenerated cellulose membranes. The thermally modulated permeability properties of the grafted membranes were studied using water flux measurements. It was found that the thermally modulated permeability properties of a cellulose surface can be tailored by the use of the ATRP method. Copyright © 2010 Society of Chemical Industry     

Structural effects of type of intercalant in poly (4‐vinylpyridine) nanocomposites: compatible homopolymer or block copolymer

4‐vinylpyridine monomer was mixed with organophilic montmorillonite (MMT) clay and polymerized in the presence of free‐radical initiator. MMT clay was rendered organophilic by means of ion‐exchanging sodium cations for low‐molecular‐weight quaternized poly(4‐vinylpyridine) (P4VP) homopolymer and diblock copolymers of styrene and quaternized 4‐vinylpyridine (SVP) with different sequence lengths. The swelling behaviour of the MMT clay was studied by X‐ray diffraction (XRD). After the cation exchange, the resulting organophilic clays showed an expansion of interlayer distance indicating the nanoscale ordering of intercalant polymer and MMT layers. The nanocomposite materials, when moulded, exhibited improved thermal stability and dynamic mechanical properties compared with neat P4VP. The composite, having longer ionic segments in its organophilic MMT, showed exfoliated nanocomposite structure as well as higher stiffness and damping properties at higher temperatures even for MMT loading as low as 2 wt%. Copyright © 2006 Society of Chemical Industry     

Effects of ethyl acetate on the soap‐free emulsion polymerization of 4‐vinylpyridine and styrene

The properties and morphologies of poly(4‐vinylpyridine‐co‐styrene) [P(4VP/St)] lattices, prepared by soap‐free emulsion polymerization using the water‐soluble initiator 2,2′‐azobis(2‐amidinopropane) · 2HCl (V50), were greatly affected by the addition of ethyl acetate (EA). The properties and morphologies of the resultant lattices were characterized by measuring the zeta potential, viscosity average molecular weight, particle size and distribution, glass‐transition temperature (T_g), and photographs taken by SEM and TEM. The effects of two kinds of monomer feeding modes, that is, the batch and semicontinuous emulsion copolymerization, were also investigated. For batch emulsion copolymerization, by charging EA, the core–shell morphology resulting from the disparate reactivity ratios of the 4VP(1)/St(2) copolymerization system (r₁ = 1.04, r₂ = ?0.73) disappeared. Instead, first a bimodal particle size distribution, with an apparently asymmetric composition structure, and then spherical microspheres were obtained as the amount of EA charged increased from 2 to 10 wt %. The particle size increased twofold by the addition of EA. The zeta potential of particles increased from +64.4 to more than +100 mV, and viscosity average molecular weight decreased from 9.70 to 0.97 × 10⁵ g/mol, as EA increased from 0 to 8 wt %. With the semicontinuous copolymerization, raspberry‐like particles were obtained by charging 10 wt % EA, whereas a sandwich‐like morphology was obtained without EA. The DSC curves showed one T_g for all the lattices prepared with charging EA, but two T_g's for the latex prepared without using EA, regardless of the monomer feeding modes. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 80: 1988–2001, 2001     

Surface‐initiated atom‐transfer radical polymerization (SI‐ATRP) of methyl methacrylate from carbon fibre

Surface modification of carbon fibre (CF) by well‐defined polymer brushes was carried out using the ‘grafting from’ method. Poly(methyl methacrylate)‐grafted carbon fibre (CF‐PMMA) was successfully prepared by surface‐initiated atom‐transfer radical polymerization (SI‐ATRP) of methyl methacrylate (MMA) from the macro‐initiator, bromo‐acetic ester‐modified carbon fibre (CF‐BrA), with the complex of 1,10‐phenanthroline and Cu(I)Br as catalyst. The percentage of grafting (PG%) and the conversion of monomer (C%) increased linearly with increasing of polymerization time, and reached 24.0 % and 6.7 %, respectively, after a polymerization time of 6 h, calculated from the elemental analyses (EA). The structural and surface morphological analyses were conducted with Fourier‐transform infrared (FTIR) spectroscopy, X‐ray photoelectron spectroscopy (XPS) and scanning electron microscopy (SEM). Copyright © 2005 Society of Chemical Industry     

Synthesis and swelling characteristics of poly(4‐vinylpyridine) gels crosslinked by irradiation

The effect of irradiation under vacuum on thermal properties and swelling behavior on poly(4‐vinylpyridine) (P4VP) was investigated. The gel percentage in the irradiated P4VP films was determined by Soxhlet extraction. UV spectroscopy was also used to determine sol percentage, which decreased as the radiation dose increased. The changes in thermal properties, such as glass‐transition temperature (T_g), were followed by differential scanning calorimetry before and after Soxhlet extraction. The gels prepared after irradiation were characterized with respect to their swelling properties and network structures. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 81: 2609–2614, 2001     

Water‐soluble/dispersible carbazole‐containing random and block copolymers by nitroxide‐mediated radical polymerisation

A series of carbazole‐containing water‐dispersible poly(acrylic acid)‐b‐(9‐(4‐vinylbenzyl)‐9H‐carbazole) block copolymers (poly(AA)‐b‐poly(VBK)) and water‐soluble poly(methacrylic acid‐ran‐(9‐(4‐vinylbenzyl)‐9H‐carbazole)) (poly(MAA‐ran‐VBK)) random copolymers were synthesised in a controlled manner (i.e. low polydispersities $(\overline {M_{{\rm w}} } /\overline {M_{n} } < 1.3)$ by nitroxide‐mediated polymerisation (NMP) using an SG1‐based alkoxyamine initiator, BlocBuilder. Poly(AA)‐b‐poly(VBK) block copolymers were most easily accessed by using poly(AA) in its protected form as the macroinitiator for the 9‐(4‐vinylbenzyl)‐9H‐carbazole (VBK) block. Controlled polymerisation of MAA was accomplished using an excess of 10 mol.% SG1 relative to BlocBuilder with VBK as controlling co‐monomer (initial molar feed content f_VBK,0 = 0.03–0.20) in dimethylformamide at 80°C. Poly(MAA‐ran‐VBK) copolymers with a final VBK molar composition of F_VBK < 0.30 resulted in water‐soluble copolymers. In addition, as macroinitiators, poly(MAA‐ran‐VBK)s were sufficiently pseudo‐living to reinitiate a second batch of monomer (90 mol.% methyl methacrylate with styrene) in organic solvent and by ab initio, surfactant‐free emulsion polymerisation. In both cases, low polydispersity, amphiphilic block copolymers resulted $(\overline {M_{{\rm w}} } /\overline {M_{{\rm n}} } < 1.3)$ . © 2012 Canadian Society for Chemical Engineering     

Controlled radical polymerization of styrene initiated by diethyldithiocarbamate‐mediated iniferters

We demonstrated that density functional theory calculations provide a prediction of the trends in C‐S bond dissociation energies and atomic spin densities for radicals using two model compounds as diethyldithiocarbamate (DC)‐mediated iniferters. On the basis of this information, we synthesized 2‐(N,N‐diethyldithiocarbamyl)isobutylic acid (DTCA) and (4‐cyano‐4‐diethyldithiocarbamyl)pentanoic acid (CDPA) as DC‐mediated iniferters. Free‐radical polymerizations of styrene (St) were carried out in benzene initiated by DTCA or CDPA under UV irradiation. The first‐order time‐conversion plots showed the straight line for the UV irradiation system initiated by CDPA indicating the first order in monomer. The number‐average molecular weight (M_n) of the polystyrene (PSt) increased in direct proportion to monomer conversion. The molecular weight distribution (M_w/M_n) of the PSt was in the range of 1.3–1.7. It was concluded this polymerization system proceeded with a controlled radical mechanism. However, photopolymerization of styrene initiated by DTCA showed nonliving polymerization consistent with UV initiation. Theoretical predictions supported these experimental results. Methacrylic acid (MA) could also be polymerized in a living fashion with such a PSt precursor as a macroinitiator because PSt exhibited a DC group at its terminal end. This system could be applied to the architecture of block copolymers. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 95: 413–418, 2005     

Highly efficient interpenetrating polymerization of styrene and 4‐vinylpyridine with poly(ethylene terephthalate) using benzoyl peroxide

A polymerization method for the preparation of an interpenetrating network polymer with poly(ethylene terephthalate) is reported. Two types of monomer, styrene and 4‐vinylpyridine, were chosen as hydrophobic and hydrophilic representatives, respectively, in order to show the versatility of this polymerization method. The polymer‐immobilized poly(ethylene terephthalate) samples were characterized using Fourier transform infrared spectroscopy, scanning electron microscopy and X‐ray photoelectron spectroscopy. The immobilization efficiency of styrene as a function of reaction temperature, monomer‐to‐initiator molar ratio, reaction time, addition of solvent, surface hydrophilicity and immersion in initiator was studied. The maximum immobilization percentage of styrene reaches 111%. The immobilization efficiency is proportional to polymer molecular weight and sample thickness. Based on these results, this strategy is shown to be an efficient, versatile method for preparing interpenetrating network polymers and can be used as a means to modify the structures and properties of polymeric substrates. © 2013 Society of Chemical Industry     

Synthesis and characterization of polypyrrole‐au coated SiO2@poly(4‐vinylpyridine) composites

Microspheres with silica as core and poly(4‐vinylpyridine) (P4VP) as shell were synthesized. AuCl ions were bound by P4VP chains to form the complex, which acted both as an oxidant of pyrrole monomers and as a source of Au atoms. By vapor phase polymerization, the PPy and Au nanoparticles were simultaneously formed on the surfaces of SiO₂@P4VP microspheres. The core‐shell structure was confirmed by transmission electron microscopy. The surface morphologies of the composites were observed by scanning electron microscopy. The molecular structures of composites were characterized in detail by Raman spectra, X‐ray diffraction, and X‐ray photoelectron spectroscopy. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Preparation of pH‐responsive crosslinked materials from natural rubber and poly(4‐vinylpyridine)

Stimuli‐responsive elastomers are smart materials for sensing applications. Natural rubber (NR) is a renewable elastomer with excellent elasticity and fatigue resistance. In this work, a straightforward method for the preparation of pH‐responsive crosslinked materials from NR and poly(4‐vinylpyridine) (P4VP) via free radical crosslinking reaction using benzoyl peroxide (BPO) as an initiator is described. The effects of P4VP and BPO concentrations, reaction time and reaction temperature on immobilization percentage were investigated. It was found that the immobilization percentage reached 90% when using a P4VP concentration of 150 phr and a BPO concentration of 10 phr for 24 h at 90 °C. The pH responsiveness of the crosslinked materials was studied via water swelling, water contact angle and dye release measurements. Unlike unmodified rubber, the P4VP‐crosslinked NR was found to be pH‐responsive in acidic solution. Indigo carmine adsorption studies showed the Langmuir isotherm suggesting monolayer coverage of dye on the rubber surface. The dye could also be released upon increasing the pH of solution above 4. Based on these results, the introduction of pH responsiveness to NR will lead to novel responsive rubber‐based materials that can be used in biomedical and sensing applications. © 2016 Society of Chemical Industry     

Effect of acrylic acid neutralization on ‘livingness’ of poly[styrene‐ran‐(acrylic acid)] macro‐initiators for nitroxide‐mediated polymerization of styrene

BACKGROUND: The effect of acrylic acid neutralization on the degradation of alkoxyamine initiators for nitroxide‐mediated polymerization (NMP) was studied using styrene/acrylic acid and styrene/sodium acrylate random copolymers (20 mol% initial acrylate feed concentration) as macro‐initiators. The random copolymers were re‐initiated with fresh styrene in 1,4‐dioxane at 110 °C at SG1 mediator/BlocBuilder^® unimolecular initiator ratios of 5 and 10 mol%. RESULTS: The value of k_pK (k_p = propagation rate constant, K = equilibrium constant) was not significantly different for styrene/acrylic acid and styrene/sodium acrylate compositions at 110 °C (k_pK = 2.4 × 10^?6–4.6 × 10^?6 s^?1) and agreed closely with that for styrene homopolymerization at the same conditions (k_pK = 2.7 × 10^?6–3.0 × 10^?6 s^?1). All random copolymers had monomodal, narrow molecular weight distributions (polydispersity index M?_w/M?_n = 1.10–1.22) with similar number‐average molecular weights M?_n = 19.3–22.1 kg mol^?1. Re‐initiation of styrene/acrylic acid random copolymers with styrene resulted in block copolymers with broader molecular weight distributions (M?_w/M?_n = 1.37–2.04) compared to chains re‐initiated by styrene/sodium acrylate random copolymers (M?_w/M?_n = 1.33). CONCLUSIONS: Acrylic acid degradation of the alkoxyamines was prevented by neutralization of acrylic acid and allowed more SG1‐terminated chains to re‐initiate the polymerization of a second styrenic block by NMP. Copyright © 2008 Society of Chemical Industry     

Surface‐initiated ring‐opening polymerization of ϵ‐caprolactone from the surface of PP film

This article presents the ring‐opening polymerization of ε‐caprolactone (ε‐CL) from PP film modified with an initiator layer composed of ? OSn(Oct) groups. This method consists of two steps: (1) Sn(Oct)₂ exchanged with the hydroxyl groups on the surface of PP film, forming the ? OSn(Oct) groups bonded on the surface; (2) surface‐initiated ring‐opening polymerization of ε‐CL with the ? OSn(Oct) groups. The initiator layer is characterized by attenuated total reflectance‐Fourier transform infrared (ATR‐FTIR), contact angles, and X‐ray photoelectron spectroscopy (XPS). The growth of PCL chains from the initiator layer through ring‐opening polymerization is successfully achieved. ATR‐FTIR, XPS, and scanning electron microscope (SEM) are also used to characterize the grafted film. XPS results reveal that the PCL chains cover the surface of PP film after 4 h. The SEM images reveal that the PCL chain clusters grow into regular spheroidal particles, which can be changed into other different morphology by treated with different solvents. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

Nitroxide‐mediated ‘living’ free radical synthesis of novel rod–coil diblock copolymers with polystyrene and mesogen‐jacketed liquid‐crystal polymer segments

The synthesis of rod–coil diblock copolymers with narrow polydispersity was achieved for the first time by TEMPO‐mediated ‘living’ free radical polymerization of styrene and 2,5‐bis[(4‐methoxyphenyl)oxycarbonyl]styrene. The block architecture of the two diblock copolymers thus prepared, MPCS‐block‐St (5400/2400) and MPCS‐block‐St (10 800/8700), was confirmed by GPC, ¹H and ¹³C NMR and DSC studies. The liquid‐crystalline behaviour of the copolymers was studied by DSC and polarized optical microscope. It was observed that both copolymers showed two distinct glass transitions, corresponding to polystyrene and poly(‐2,5‐bis[(4‐methoxyphenyl)oxycarbonyl]styrene). Above the glass transition temperature of rigid block, liquid‐crystalline phase was formed. The clearing point of the phase is higher than the polymer decomposition temperature. © 2000 Society of Chemical Industry