Rhodium(I) complex catalyst immobilized on terpolymers of N‐vinylpyrrolidinone and 1‐vinylimidazole

The hydrosilylation of cyclohexanone and acetone with triethysilane and diphenysilane catalyzed by polymer‐supported Rh(I) complex has been investigated. Two terpolymers of styrene, divinylbenzene, and 1‐vinylimidazole (S/DVB/VI) or N‐vinylpyrrolidinone (S/DVB/NVP) were used as the catalysts supports. Physical characterization of these materials has involved the measurements of the structural parameters in the dry and swollen states by DSC, the nitrogen BET adsorption method and inverse steric exclusion chromatography ISEC. From these results it can be concluded that the original polymer structure has been changed during the complex attachment giving rise to materials of higher porosity. X‐ray photoelectron spectroscopy XPS, IR, and AAS spectroscopy were used to characterization of heterogeneous complexes before and after use. The effect of the morphology of the support on the catalytic properties of the polymer‐supported Rh(I) species was tested in the hydrosilylation of ketones and correlated with the reaction mechanism. It was demonstrated that the high selectivity of homogeneous rhodium complex toward the silyl ethers can be partially reversed to the dehydrogenative silylation products by a proper choice of polymer support with favorable microporous structure. Recycling tests demonstrated high stability of the supported catalysts during prolonged use. The constant selectivity of the supported catalysts demonstrated during recycling experiments showed that they could be useful for practical application. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

The preparation of microporous membranes from blends of poly(2,6‐dimethyl‐1,4‐phenylene oxide) and sulfonated poly(2,6‐dimethyl‐1,4‐phenylene oxide)

Poly(2,6‐dimethyl‐1,4‐phenylene oxide) (PPO) is a chemically resistant polymer and, therefore, an attractive material for the formation of membranes. However, membranes of unmodified PPO prepared by an immersion precipitation possess very low hydraulic permeabilities at the filtration processes. The membranes with higher hydraulic permeabilities can be prepared from sulfonated PPO and/or from blends of unsulfonated PPO and sulfonated PPO. In conclusion, the mechanism of the formation of membranes from blends of unsulfonated PPO and sulfonated PPO is suggested. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 73: 161–167, 1999     

Mechanism of the particle formation during the oxidative polymerization of 2,6‐dimethylphenol in an aqueous medium

The changes of the molecular weight and particle size with time during the oxidative polymerization of 2,6‐dimethylphenol in an aqueous medium were studied. At the beginning of the oxidative polymerization, the oligomers with the hydrophilic phenoxy anion at the end of oligomer chains are formed rapidly in the aqueous medium. When the molecular weight of the oligomer reaches up to a critical value, the oligomer precipitates out from the water, resulting in the formation of the original particle (or domain). With the increase of the molecular weight, the concentration of the phenoxy anion and the surface charge density of the original particles decrease; therefore, the repulsion force between original particles weaken and the stability of particles in water decreases, resulting in the coagulation of the original particle and the formation of the primary particle. With the further progression of the polymerization, the primary particles coagulate and final particles are formed. A three‐stage mechanism of the particle formation is proposed, that is, the particle nucleation, first coagulation, and second coagulation. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 104: 3649–3653, 2007     

Synthesis,characterization, and metal complexation of poly(N‐phenylmaleimide‐co‐acrylic acid) and poly(N‐phenylmaleimide‐co‐acrylamide) as polychelatogens in aqueous solution

We carried out the free‐radical copolymerization of N‐phenylmaleimide with acrylic acid and acrylamide with an equimolar feed monomer ratio. We carried out the synthesis of the copolymers in dioxane at 70°C with benzoyl peroxide as the initiator and a total monomer concentration of 2.5M. The copolymer compositions were obtained by elemental analysis and ¹H‐NMR spectroscopy. The hydrophilic polymers were characterized by elemental analysis, Fourier transform infrared spectroscopy, ¹H‐NMR spectroscopy, and thermal analysis. Additionally, viscosimetric measurements of the copolymers were performed. Hydrophilic poly(N‐phenylmaleimide‐co‐acrylic acid) and poly(N‐phenylmaleimide‐co‐acrylamide) were used for the separation of a series of metal ions in the aqueous phase with the liquid‐phase polymer‐based retention method in the heterogeneous phase. The method is based on the retention of inorganic ions by the polymer in conjunction with membrane filtration and subsequent separation of low‐molecular‐mass species from the formed polymer/metal‐ion complex. The polymer could bind several metal ions, such as Cr(III), Co (II), Zn(II), Ni(II), Cu(II), Cd(II), and Fe(III) inorganic ions, in aqueous solution at pH values of 3, 5, and 7. The interaction of the inorganic ions with the hydrophilic polymer was determined as a function of pH and a filtration factor. Hydrophilic polymeric reagents with strong metal‐complexing properties were synthesized and used to separate those complexed from noncomplexed ions in the heterogeneous phase. The polymers exhibited a high retention capability at pH values of 5 and 7. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci, 2006     

Self‐assembled and crystallized composites made from poly(ether amine) and montmorillonite in the presence of copper(II) ions

Self‐assembled and crystallized composites made from montmorillonite (MMT) by intercalation with poly(ether amine) salts and copper(II) [Cu(II)] ions simultaneously were studied. The manipulation of the silicate unit structure of the secondary (001) lattice by physically imposed osmotic pressure on the platelet interlayer was used. Divalent copper salt assisted a strong depletion effect with balancing the counterions in the clay interlayer and resulted in the extension of the dimensions of the (001) plane by increasing the spacing expansion by more than two orders of magnitude. The simultaneous adsorption of Cu(II) and intercalation of poly(oxypropylene)amine (POP) salts onto the MMT units ultimately minimized their amorphous aggregation through electrostatic attraction between the negative surface and positive edge among the silicate units. Alternatively, the attraction force through face‐to‐face stacking on the silicate surface is proposed, and the conformation of the POP/Cu(II) complex aligned with the approaching platelets to form orderly structures. X‐ray diffraction of the MMT units exhibited a high order of reflection (i.e., (006)) in Bragg's pattern; this implied a repetitive regularity between the plate–plate distances. The high regularity disappeared when the Cu(II) adsorption exceeded the critical clay cation‐exchange capacity of 1.4. The conformation of the flexible polyether backbone was altered and could no longer sustain the plate distance and the symmetric packing was destroyed when the basal spacing was decreased from 82.6 to 18.0 Å. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Application of FTIR spectroscopy for structural characterization of ternary poly(acrylic acid)–metal–poly(vinyl pyrrolidone) complexes

The FTIR spectroscopic technique was used in the study of ternary polymer–metal complexes containing two polyelectrolytes of opposite charge and metal ions. The structure of the ternary (PAA‐Fe³⁺‐PVP) complexes was examined by following the changes in their infrared spectra. It was found that the shapes of the absorption bands of the resultant compounds are influenced by the presence of Fe³⁺. According to this result it was suggested that two types of structure which differ in the composition are formed, one of which results from the coordination of Fe³⁺ with PAA‐PVP complex and the other is due to the formation of Fe³⁺ polycarboxylate. Comparison between the spectrum of PAA‐PVP complex and those of the compounds resulted from the reaction between the two opposite charged electrolytes, PAA and PVP and each of the divalent metal chlorides NiCl₂, CoCl₂, CuCl₂, and ZnCl₂) led to the conclusion that a reaction took place between the divalent transition metal chlorides and the extent of reaction depends on the nature of metal ions and PAA‐PVP complex. The FTIR spectra of the precipitate resulted from the mixtures of PAA‐PVP and Ni(NO₃)₂ or Sr(NO₃)₂ were investigated. It was noted that the addition of Ni(NO₃)₂ or Sr(NO₃)₂ to the mixture of the electrolytes of PAA and PVP provoked appreciable changes in the characteristic spectral features of the complex resulting from the interaction of the metal ions with the polymer–polymer complex. The FTIR spectra of the precipitate resulted from the reaction between CeCl₃, ErCl₃, and LaCl₃ were also investigated. It was concluded that a reaction took place between the rare earth metals and the PPC. This means that ternary polymer–metal–polymer complexes were formed. The extent of changes in the spectral features differs from metal to metal according to the nature of metal ions. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci, 2007     

Fabrication and investigation of phosphoric acid doped imidazolium siloxane crosslinked poly(2,6‐dimethyl‐1,4‐phenylene oxide) for high temperature polymer electrolyte membranes

A series of high temperature polymer electrolyte membranes were fabricated based on imidazolium poly(2,6‐dimethyl‐1,4‐phenylene oxide) (PPO) using methylimidazole (MeIm) and triethoxysilylpropyldihydroimidazole (SiIm) as quaternization reagents via the S_N2 nucleophilic substitution. Meanwhile SiIm was also employed as a crosslinking agent and the crosslinked Si–O–Si network was constructed through a hydrolysis procedure of SiIm in an acid medium. Compared with the PPO‐100%MeIm membrane without the crosslinking structure, the imidazolium siloxane crosslinked PPO‐x%SiIm‐y%MeIm membranes exhibited increased acid doping contents, enhanced dimensional stabilities, improved mechanical properties and higher conductivities. The PPO‐30%SiIm‐70%MeIm/(198 wt% phosphoric acid) membrane displayed a conductivity of 0.08 S cm^?1 at 180 °C without humidifying and a tensile strength of 6.4 MPa at room temperature. © 2019 Society of Chemical Industry     

Synthesis and characterization of a poly(ether–ester) copolymer from poly(2,6 dimethyl‐1,4‐phenylene oxide) and poly(ethylene terephthalate)

A series of poly(ether–ester) copolymers were synthesized from poly(2,6 dimethyl‐1,4‐phenylene oxide) (PPO) and poly(ethylene terephthalate) (PET). The synthesis was carried out by two‐step solution polymerization process. PET oligomers were synthesized via glycolysis and subsequently used in the copolymerization reaction. FTIR spectroscopy analysis shows the coexistence of spectral contributions of PPO and PET on the spectra of their ether–ester copolymers. The composition of the poly(ether–ester)s was calculated via ¹H NMR spectroscopy. A single glass transition temperature was detected for all synthesized poly(ether–ester)s. T_g behavior as a function of poly(ether–ester) composition is well represented by the Gordon‐Taylor equation. The molar masses of the copolymers synthesized were calculated by viscosimetry. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci, 2006     

Ion‐exchange membranes prepared by blending sulfonated poly(2,6‐dimethyl‐1,4‐phenylene oxide) with polybenzimidazole

New ion‐exchange acid/base‐blend (SPPO/PBI) membranes were prepared by mixing N,N‐dimethylacetamide (DMA) solutions of sulfonated poly(2,6‐dimethyl‐1,4‐phenylene oxide) (SPPO) in the ammonium form and of polybenzimidazole (PBI), casting the solution as a thin film, evaporating the solvent, and treating the membrane with aqueous hydrochloric acid. The resulting membranes were found insoluble in DMA. The preliminary tests of the membranes were carried out in an H₂/O₂ fuel cell at room temperature. Their performance in the fuel cell increased with the increase in the concentration of SPPO sulfonic acid groups in the blend, but the membranes formed with the highly sulfonated SPPO alone or predominanting, which swelled excessively in water, did not give reproducible results, and their performance was usually inferior to that of the membranes having an optimum ratio of both components. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 85: 1118–1127, 2002     

New manganese catalyzed regiocontrolled synthesis of poly(2,5‐dialkyl‐1,4‐phenylene oxide)s

A new catalyst system is developed for regiocontrolled synthesis of poly(2,5‐dialkyl‐1,4‐phenylene oxide)s by oxidative coupling polymerization of 2,5‐dialkylphenol. The treatment of the α‐benzoin oxime with manganese chloride in methanol under basic condition led to the formation of manganese benziloxime complex in which α‐benzoin oxime was converted to benziloxime and coordinated to manganese as bidentate ligands. The polymerizations were conducted in toluene using manganese benziloxime complex and dibutylamine in a continuous flow of oxygen, and the structures, properties of the catalyst, and polymers were studied by nuclear magnetic resonance spectroscopy (NMR), Fourier transform infrared spectroscopy (FTIR), differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), and gel permeation chromatography (GPC). The catalyst showed high regioselectivity and reasonably good yields to afford the poly(2,5‐dimethyl‐1,4‐phenylene oxide)s with 1,4‐C‐O linkage structure which possessed melting point higher than the poly(p‐phenylene sulfide) or type II liquid crystalline polymer. The regioselectivity was enhanced when employing molecular sieves‐supported manganese catalyst system at 90°C and the crystallinity of poly(2,5‐dimethyl‐1,4‐phenylene oxide)s was estimated by wide‐angle X‐ray scattering (WAXS) and DSC. The crystallinity was calculated about 23.7% and a heat‐reversible melting and crystallization behavior occurred at 327.8 and 306.8°C, respectively. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Synthesis of poly(vinyl alcohol)‐graft‐poly(ε‐caprolactone) and poly(vinyl alcohol)‐graft‐poly(lactide) in melt with magnesium hydride as catalyst

Grafting of poly(ε‐caprolactone) (PCL) and poly(lactide) (PLA) chains on poly(vinyl alcohol) backbone (PVA degree of hydrolysis 99%) was investigated using MgH₂ environmental catalyst and melt‐grown ring‐opening polymerization (ROP) of ε‐caprolactone (CL) and L ‐lactide (LA), that avoiding undesirable toxic catalyst and solvent. The ability of MgH₂ as catalyst as well as yield of reaction were discussed according to various PVA/CL/MgH₂ and PVA/LA/MgH₂ ratio. PVA‐g‐PCL and PVA‐g‐PLA were characterized by ¹H‐ and ¹³C‐NMR, DSC, SEC, IR. For graft copolymers easily soluble in tetrahydrofuran (THF) or chloroform, wettability and surface energy of cast film varied in relation with the length and number of hydrophobic chains. Aqueous solution of micelle‐like particles was realized by dissolution in THF then addition of water. Critical micelle concentration (CMC) decreased with hydrophobic chains. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Thermal,mechanical, and morphological characterization studies of poly(2,6‐dimethyl‐1,4‐phenylene oxide) blends with polystyrene and brominated polystyrene

The miscibility of the binary and ternary blends of poly(2,6‐dimethyl‐1,4‐phenylene oxide), brominated polystyrene, and polystyrene was investigated using a differential scanning calorimeter. The morphology of these blends was characterized by scanning electron microscopy. These studies revealed a close relation between the blend structure and its mechanical properties. The compatibilizing effect of poly(2,6‐dimethyl‐1,4‐phenylene oxide) on the miscibility of the polystyrene/brominated polystyrene blends was examined. It was found that poly(2,6‐dimethyl‐1,4‐phenylene oxide), which was miscible with polystyrene and partially miscible with brominated polystyrene, compatibilizes these two immiscible polymers if its contention exceeds 33 wt %. Upon the addition of poly(2,6‐dimethyl‐1,4‐phenylene oxide) to the immiscible blends of polystyrene/brominated polystyrene, we observed a change in the morphology of the mixtures. An improvement in the mechanical properties was noticed. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 75: 225–231, 2000     

Preparation,characterization, and metal ion retention capacity of Co(II) and Ni(II) from poly(p‐HO‐ and p‐Cl‐phenylmaleimide‐co‐2‐hydroxypropylmethacrylate) using the ultra filtration technique

p‐Chlorophenylmaleimide and p‐hydroxyphenylmaleimide with 2‐hydroxypropyl methacrylate were synthesized by radical polymerization, and the metal ion retention capacity and thermal behavior of the copolymers were evaluated. The copolymers were obtained by solution radical polymerization with a 0.50 : 0.50 feed monomer ratio. The maximum retention capacity (MRC) for the removal of two metal ions, Co(II) and Ni(II) in aqueous phase were determined using the liquid‐phase polymer based retention technique. Inorganic ion interactions with the hydrophilic polymer were determined as a function of pH. The metal ion retention capacity does not depend strongly on the pH. Metal ion retention increased with an increase of pH for a copolymer composition 0.50 : 0.50. At different pH, the MRC of the poly(p‐chlorophenylmaleimide‐co‐2‐hydroxypropylmethacrylate) for Co(II) and Ni(II) ions varied from 44.1 to 48.6 mg/g and from 41.5 mg/g to 46.0 mg/g, respectively; while the MRC of poly(p‐hydroxyphenylmaleimide‐co‐2‐hydroxypropyl methacrylate) for Co(II) and Ni(II) ions varied from 28.4 to 35.6 mg/g and from 27.2 to 30.8 mg/g, respectively. The copolymers and copolymer–metal complexes were characterized by elemental analysis, FT‐IR, ¹H NMR spectroscopy, and thermal behavior. The thermal behavior of the copolymer and polymer–metal complexes were studied using differential scanning calorimetry and thermogravimetry techniques under nitrogen atmosphere. The thermal decomposition temperature and T_g were influenced by the binding‐metal ion on the copolymer. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

Synthesis and characterization of poly(p‐phenylene)‐graft‐poly(ε‐caprolactone) copolymers by combined ring‐opening polymerization and cross‐coupling processes

2,5‐Dibromo‐1,4‐(dihydroxymethyl)benzene was used as initiator in ring‐opening polymerization of ε‐caprolactone in the presence of stannous octoate (Sn(Oct)₂) catalyst. The resulting poly(ε‐caprolactone) (PCL) macromonomer, with a central 2,5‐dibromo‐1,4‐diphenylene group, was used in combination with 1,4‐dibromo‐2,5‐dimethylbenzene for a Suzuki coupling in the presence of Pd(PPh₃)₄ as catalyst or using the system NiCl₂/bpy/PPh₃/Zn for a Yamamoto‐type polymerization. The poly(p‐phenylenes) (PPP) obtained, with PCL side chains, have solubility properties similar to those of the starting macromonomer, ie soluble in common organic solvents at room temperature. The new polymers were characterized by ¹H and ¹³C NMR and UV spectroscopy and also by GPC measurements. The thermal behaviour of the precursor PCL macromonomer and the final poly(p‐phenylene)‐graft‐poly(ε‐caprolactone) copolymers were investigated by thermogravimetric analysis and differential scanning calorimetry analyses and compared. Copyright © 2004 Society of Chemical Industry     

Metal‐ion‐retention properties of the poly(2‐acrylamido‐2‐methyl‐1‐propanosulfonic acid‐co‐4‐vinyl pyridine) resin

The water‐insoluble resin poly(2‐acrylamido‐2‐methyl‐1‐propanosulfonic acid‐co‐4‐vinyl pyridine), through a radical polymerization solution, was synthesized with ammonium persulfate as an initiator and N,N‐methylene bisacrylamide as a crosslinking reagent. The metal‐ion‐retention properties were studied by batch and column equilibrium procedures for the following metal ions: Hg(II), Cu(II), Cd(II), Zn(II), Pb(II), and Cr(III). These properties were investigated under competitive and noncompetitive conditions. The effects of the pH, maximum retention capacity, and regeneration capacity were studied. The resin showed a high retention ability for Hg(II) ions at pH 2.0. The retention of Hg(II) ions from a mixture of ions was greater than 90%. The resin showed a high selectivity for Hg(II) with respect to other metal ions. The Hg(II)‐loaded resin was able to be recovered with 4M HClO₄. The retention capacity was kept after four cycles of adsorption and desorption. The retention properties for Hg(II) were very similar with the batch and column methods. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 3556–3562, 2003     

Synthesis,characterization, and ligating behavior of poly[N,N‐p‐phenylene bisacryl (methacryl)amide]

Monomers of diacylated amine were synthesized by the reaction of acryloyl chloride or methacryloyl chloride with p‐phenylenediamine. Heating DMF solution of these monomers at 75°C in the presence of AIBN as an initiator gave the corresponding polymer. The solid metallopolymer complexes with different metal salts were isolated either by the in situ addition of the monomer, metal salt, and initiator at 75°C or by the reaction of the isolated polymer with the metal salt at 150°C. The monomers, polymers, and their metallopolymer compounds were characterized using elemental analysis, IR, NMR (¹H and ¹³C), and MS spectral measurements in addition to thermal analysis. The IR data showed that the coordinating atoms of the polymer are dependent on the reaction temperature. The ion selectivity of the isolated polymers toward different metal ions either for a single metal ion or in a mixture as aqueous solutions are studied by the batch techniques. Energy dispersive spectroscopy (EDS) measurements showed that both polymers are more selective to Hg²⁺ and Pb²⁺. The morphology of the polymers and their metallopolymer complexes at different temperature was also studied. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 2412–2422, 2006     

Microporous membranes prepared from blends of polysulfone and sulfonated poly(2,6‐dimethyl‐1,4‐phenylene oxide)

Membranes were prepared from solutions containing Udel‐type polysulfone (PSf) and sulfonated poly(2,6‐dimethyl‐1,4‐phenylene oxide) (SPPO). Polymer solutions in 1‐methyl‐2‐pyrrolidone were cast on a nonwoven textile and precipitated in a water bath. The permeabilities and selectivities of the prepared membranes depended on the concentrations of both polymers in the casting solution. The higher the concentration of PSf, the lower were the permeabilities to water and average pore sizes of the membranes. On the other hand, a very small amount of SPPO in the casting solution (about 1–4 wt % relative to the casting solution weight) brought about a considerable increase in water permeabilities and had a small influence on the average pore sizes. The effects were most pronounced if SPPO with a degree of sulfonation of 20–40% was used. The considerable increase in water permeabilities was explained by separation of the PSf and SPPO phases during precipitation in water and by the concentration of hydrophilic SPPO on the surface of the membrane and its pores. The determinations of the oriented concentration potentials proved the presence of a negative surface charge in the membranes. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 81: 134–142, 2001     

Synthesis and characterization of new aromatic poly(amide–imide)s based on 4‐aryl‐2,6‐bis(4‐trimellitimidophenyl) pyridines

New diimide–dicarboxylic acids, ie 4‐phenyl‐2,6‐bis(4‐trimellitimidophenyl)pyridine and 4‐p‐biphenyl‐2,6‐bis‐(4‐trimellitimidophenyl)pyridine, were synthesized by the condensation reaction of 4‐phenyl‐2,6‐bis(4‐aminophenyl)pyridine and 4‐p‐biphenyl‐2,6‐bis(4‐aminophenyl)pyridine with trimellitic anhydride in glacial acetic acid or dimethylformamide. The monomers were fully characterized by FT‐IR and NMR spectroscopies, and elemental analyses. A series of novel poly(amide–imide)s with inherent viscosities of 0.68–0.87 dl g^?1 was prepared from the two diimide–diacids with various aromatic diamines by direct polycondensation. The poly(amide–imide)s were characterized by FT‐IR and NMR spectroscopies. The λ_max data for the resulting poly(amide–imide)s were in the range of 260–292 nm. These polymers exhibited good solubilities in polar aprotic solvents. The 10 % weight loss temperatures are above 485 °C under a nitrogen atmosphere. Copyright © 2004 Society of Chemical Industry