Nickel(II)‐imprinted monolithic columns for selective nickel recognition

Ni²⁺‐imprinted monolithic column was prepared for the removal of nickel ions from aqueous solutions. N‐Methacryloyl‐L ‐histidine was used as a complexing monomer for Ni²⁺ ions in the preparation of the Ni²⁺‐imprinted monolithic column. The Ni²⁺‐imprinted poly(hydroxyethyl methacrylate‐N‐methacryloyl‐L ‐histidine) (PHEMAH) monolithic column was synthesized by bulk polymerization. The template ion (Ni²⁺) was removed with a 4‐(2‐pyridylazo) resorcinol (PAR):NH₃? NH₄Cl solution. The water‐uptake ratio of the PHEMAH–Ni²⁺ monolith increased compared with PHEMAH because of the formation of nickel‐ion cavities in the polymer structure. The adsorption of Ni²⁺ ions on both the PHEMAH–Ni²⁺ and PHEMAH monoliths were studied. The maximum adsorption capacity was 0.211 mg/g for the PHEMAH–Ni²⁺ monolith. Fe³⁺, Cu²⁺, and Zn²⁺ ions were used as competitive species in the selectivity experiments. The PHEMAH–Ni²⁺ monolithic column was 268.8, 25.5, and 10.4 times more selective than the PHEMAH monolithic column for the Zn²⁺, Cu²⁺, and Fe³⁺ ions, respectively. The PHEMAH–Ni²⁺ monolithic column could be used repeatedly without a decrease in the Ni²⁺ adsorption capacity. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Binding behavior of Fe3+ ions on ion‐imprinted polymeric beads for analytical applications

We used a molecular imprinting approach to achieve specific metal binding utilizing N‐methacryloyl‐(L )‐cysteine methyl ester (MAC) as a metal‐complexing ligand. MAC was synthesized using methacryloyl chloride and cysteine methyl ester. Then, Fe³⁺ was complexed with MAC monomer. Fe³⁺‐imprinted poly(hydroxyethyl methacrylate‐N‐methacryloyl‐(L )‐cysteine methyl ester) [poly(HEMA‐MAC)] beads with average size of 63–140 μm were produced by suspension polymerization. After that, the template ions (i.e. Fe³⁺ ions) were removed by 0.1M HCl. Fe³⁺‐imprinted beads were characterized by swelling studies, FTIR, and elemental analysis. The Fe³⁺‐imprinted beads with a swelling ratio of 72%, and containing 3.9 mmol MAC/g were used in the binding of Fe³⁺ ions from aqueous solutions, tap water, certified reference serum sample, and real serum sample. Maximum binding capacity, optimum pH, and equilibrium binding time were 107 μmol/g, pH 3.0, and 30 min, respectively. It was observed that even in the presence of other ions, Fe³⁺‐imprinted beads selectively bound Fe³⁺ ions with 97% efficiency. Removal of Fe³⁺ ions from certified reference serum sample was approximately found to be 33%. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 3520–3528, 2006     

Ion‐selective Imprinted Superporous Monolith for Cadmium Removal from Human Plasma

Abstract

Molecular recognition based separation systems have received much attention because of their high selectivity for target molecules. Molecular imprinting has been recognized as a promising technique for the development of affinity adsorbents. Molecularly imprinted polymers (MIP) are easy to prepare, stable, inexpensive, and capable of molecular recognition. Cadmium is a carcinogenic and mutagenic element. The limit value of cadmium in blood should be no higher than 50 pg/L when exposure to cadmium is unavoidable in industry. There is no specific treatment available for acute or chronic metal poisoning. Besides supportive therapy and hemodialysis, metal poisoning is often treated with commercially available chelating agents including EDTA and dimercaprol. However, there is histopathological evidence for increased toxicity in animals when these agents are utilized. The aim of this study is to prepare superporous ion‐imprinted polymer monolith which can be used for the selective removal of Cd²⁺ ions from Cd²⁺‐overdosed human plasma. N‐methacryloly‐(L)‐cysteinemethylester (MAC) was chosen as the complexing monomer. In the first step, MAC synthesized by using methacryloyl chloride and cysteine. Cd²⁺ was complexed with MAC monomer and the Cd²⁺‐imprinted poly(HEMA‐MAC) monoliths were synthesized by bulk polymerization. After that, Cd²⁺ ions were removed by 0.1 M thiourea and 0.1 M HNO₃ solutions, respectively. Cd²⁺‐imprinted poly(HEMA‐MAC) monoliths had a specific surface area of 226.8 m²/g and the swelling ratio was determined to be 76%. According to the elemental analysis results, monoliths contain approximately 58.3 µmol/g of MAC. The maximum adsorption capacity for Cd²⁺ ions was 26.6 µmol/g of the dry weight of monolith. The adsorption capacity decreased significantly from 23.25 µmol/g to 3.08 µmol/g polymer with the increase of the flow‐rate from 1 mL/min to 4 mL/min. The Cd²⁺‐imprinted poly(HEMA‐MAC) monolith could be used many times without decreasing their adsorption capacities significantly.     

Ion imprinted beads embedded cryogels for in vitro removal of iron from β-thalassemic human plasma

Molecular recognition based Fe³⁺ imprinted poly(GMA-MAC) (MIP) beads embedded PHEMA composite cryogel was prepared for selective removal of Fe³⁺ ions from β-thalassemia patient plasma. The precomplexation was achieved by the coordination of Fe³⁺ ions with N-methacryloyl-(L )-cysteine methyl ester (MAC-Fe³⁺). MIP beads were prepared by dispersion polymerization in the presence of MAC-Fe³⁺ complex and glycidyl methacrylate (GMA) monomer. Then the MIP beads were embedded into poly(hydroxyethyl methacrylate) (PHEMA) cryogel. The specific surface area and the swelling degree of the PHEMA-MIP composite cryogel were found to be 76.8 m²/g and 7.7 g H₂O/g cryogel, respectively. The maximum adsorption amount of Fe³⁺ ions was 2.23 mg/g. The relative selectivity of PHEMA-MIP composite cryogel towards the Fe³⁺ ions was 135.0, 61.4, and 57.0 times greater than that of the PHEMA-NIP cryogel as compared with the Ni²⁺, Zn²⁺, and Fe²⁺ ions, respectively. PHEMA-MIP composite cryogel was recovered and reused many times without any significant decrease in its adsorption capacity. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Ag+ ions imprinted cryogels for selective removal of silver ions from aqueous solutions

ABSTRACT

The removal of heavy metal ions from aquatic media or any conditions is crucial. Silver ions turn out to be the important example of this problem on earth when these are released to the environment. In the present study, silver ions (Ag⁺) imprinted poly(hydroxyethyl methacrylate) (PHEMA)-based cryogels were prepared using N-methacryloyl-L-cysteine as functional monomer, to be chelated with Ag⁺ ions. The maximum adsorption capacity of Ag⁺-imprinted polymeric cryogel was found to be 49.27 mg/g from aqueous solutions. To investigate the affinity of Ag⁺-imprinted PHEMAC cryogel column, photographic film material from the natural silver ion source was used. The recovery results were 72.8% for the Ag⁺-imprinted PHEMAC cryogel and 0.62% for the non-imprinted PHEMAC cryogels. These values clearly showed the selectivity of the Ag⁺-imprinted PHEMAC cryogel column. The adsorption–desorption cycle was performed more 10 times with use of the same Ag⁺-imprinted PHEMAC cryogel for the determination of reuse. These molecularly imprinted cryogels were used in adsorption process for a long time with no significant loss.     

Preparation of a surface molecular‐imprinted adsorbent for Ni2+ based on Penicillium chrysogenum

A new chitosan molecular‐imprinted adsorbent was prepared from the mycelium of waste biomass. The results showed that an adsorbent using Penicillium chrysogenum mycelium as the core material was better than one derived from peanut coat. The adsorption capacity of the surface‐imprinted adsorbent for Ni²⁺ was enhanced by increasing the chitosan concentration in the imprinting process. Epichlorohydrin was better than glutaraldehyde as a cross‐linking agent; the optimal imprinted Ni²⁺ concentration for preparing the surface‐imprinted adsorbent was 2 mg (Ni²⁺) g^?1 of mycelium. The adsorption capacity of the surface‐imprinted adsorbent was 42 mg g^?1 (at 200 mg dm^?3 initial metal ions concentration) and twice that of the mycelium adsorbent. The surface‐imprinted adsorbent can be reused for up to 15 cycles without loss of adsorption capacity. Copyright © 2005 Society of Chemical Industry     

Preparation and characterisation of a novel copper‐imprinted polymer based on β‐cyclodextrin copolymers for selective determination of Cu2+ ions

A novel ion‐imprinted polymer (IIP) using (6‐O‐butene diacid ester)‐β‐cyclodextrin (β‐CD‐MAH) as the functional monomer and copper ions as the template was developed for Cu²⁺ sensing. First, reactive β‐cyclodextrin (β‐CD) monomers with vinyl carboxylic acid functional groups were synthesised and were co‐polymerised with styrene via radical polymerisation. Then, the β‐CD copolymers were complexed with Cu²⁺ in order to obtain the IIP. The imprinting effect was realised by removing the template ions from the imprinted polymer. The structure, composition and morphology of the IIP were characterised by Fourier transform IR spectroscopy, energy‐dispersive spectroscopy and field‐emission SEM. The adsorption capacity was investigated by UV–visible spectroscopy in batch operation mode. The maximum adsorption capacity for the Cu²⁺ template ions was 28.91 mg g^?1, and the adsorption selectivity was clearly illustrated from the increased sorption affinity towards Cu²⁺ ions over other competing ions. The adsorption was affected by the pH of the aqueous medium, and enhanced adsorption capacity was observed at pH 5. The prepared IIP could be used 10 times after its regeneration without significant loss of the adsorption capacity. © 2018 Society of Chemical Industry     

Selective Separation of Thorium Using Ion Imprinted Chitosan‐Phthalate Particles via Solid Phase Extraction

Abstract

We have studied a new method for the preparation of Th(IV)‐imprinted chitosan‐phthalate particles, which can considerably enhance the adsorption capacity and selectivity of thorium ions. In this study, chitosan‐phthalate was used as the complexing monomer, Th(IV) as template, epichlorohydrin as crosslinking agent. Initially, chitosan was modified with phthalic anhydrides and complex formation occured between carboxylic acid functional groups and Th(IV) ions. Secondly, particles were crosslinked with epichlorohydrin. After the removal of Th(IV) ions, thorium solid phase extraction (SPE) on the Th(IV) ion‐imprinted particles from aqueous solutions containing their different amounts, selectivity study of thorium versus other interfering metal ions mixture which are Fe³⁺, La³⁺, and Mn²⁺ and distribution and selectivity coefficients were reported here. A comparison of the selectivity coefficient of Th(IV)‐imprinted chitosan‐phthalate particles with the selectivity coefficient of non‐imprinted polymers showed that the imprinted matrix for Th(IV)/Fe(III), Th(IV)/La(III) and Th(IV)/Mn(II) was 8.35, 8.75 and 10.81 times greater than non‐imprinted matrix, respectively.     

Evaluation of chitosan tripolyphosphate gel beads as bioadsorbents for iron in aqueous solution and in human blood in vitro

Nonimprinted and Fe³⁺ imprinted chitosan tripolyphosphate gel beads were prepared via physical gel formation. A method based on in situ crosslinking using ethylene glycol diglycidyl ether was developed to imprint the chitosan tripolyphosphate gels with Fe³⁺ ion without deteriorating the gel beads. The beads were characterized by FTIR, SEM, XRD, and DSC with respect to the chemical structure, surface morphology, crystallinity, and thermal behavior. Swelling kinetics and Fe³⁺ ion adsorption behavior from aqueous solution were studied. The Fe³⁺ imprinted and in situ crosslinked beads proved to be durable and effective adsorbents for Fe³⁺ in solution. The bead prepared by in situ crosslinking and in the presence of 10 mM template ion had an equilibrium iron adsorption capacity of 53.9 mg/g after 3-hour contact with 5 mM Fe³⁺ solution. The pros and cons of the beads as biomedical iron adsorbents were tested by evaluating their serum iron removal capacities from human blood. The preliminary tests carried out showed that Fe³⁺ imprinted beads were more effective in decreasing serum iron in human blood when compared to the nonimprinted beads. The decrease in serum iron level accompanied a parallel decrease in the hemoglobin level. The calcium level was also affected upon contact with the beads. The Fe³⁺ imprinted beads were less effective than the nonimprinted ones in decreasing the calcium level indicating selectivity towards iron containing species. © 2012 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Surface molecularly imprinted polymer prepared by reverse atom transfer radical polymerization for selective adsorption indole

The preparation of indole molecularly imprinted polymers (indole‐MIPs) using 4‐vinylpyridine as functional monomer, silica gel as matrix were used to adsorb indole from fuel oil specifically. The reverse atom transfer radical polymerization (RATRP) technology was introduced to prepare the surface molecularly imprinted polymers, and the precipitation polymerization was adopted in the preparation process. The obtained indole‐MIPs were characterized by nitrogen adsorption, Fourier transform infrared spectrometry and scanning electron microscopy. The results show that indole‐MIPs were provided with the larger surface areas and more pores. The adsorption capacity of indole‐MIPs was 31.80 mg g^?1 at 298 K, and the adsorption equilibrium was reached in a short time. The adsorption process was spontaneous by thermodynamic analysis, and an appropriate decrease in temperature could enhance the adsorption capacity. The adsorption process obeyed pseudo‐second‐order kinetic model by kinetics analysis. The isotherm analysis results show that both Langmuir and Sips equations were suitable to experimental data. The selective adsorption and reusable performance of indole‐MIPs were favorable. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40473.     

Double‐functional characteristics of a surface molecular imprinted adsorbent with immobilization of nano‐TiO2

A new chitosan molecular imprinted adsorbent obtained by immobilization of nano‐TiO₂ on the adsorbent surface (surface‐imprinted adsorbent with nano‐TiO₂) was prepared. Based on photocatalytic reaction and the surface molecular imprinting technology, this new kind of surface‐imprinted adsorbent with immobilization of nano‐TiO₂ can not only adsorb template metal ions but can also degrade organic pollutants. The results showed that, after the nano‐TiO₂ was immobilized on the adsorbent surface, the adsorption ability for the imprinted ion (Ni²⁺) of this new imprinted adsorbent immobilized with nano‐TiO₂ was not affected, but the degradation ability for p‐nitrophenol (PNP) of the surface‐imprinted adsorbent with nano‐TiO₂ increased three‐fold compared with that of the surface‐imprinted adsorbent without nano‐TiO₂, from 23.8 to 76.1% (at an initial PNP concentration of 20 mg·dm^?3). The optimal TiO₂ concentration in the adsorbent preparation was 0.025 g·TiO₂ g^?1 adsorbent. The removal capacity for PNP reached 60.25 mg·g^?1 (at 400 mg·dm^?3 initial PNP concentration) under UV irradiation. The surface‐imprinted adsorbent with nano‐TiO₂ can be reused for at least five cycles without decreasing the removal ability for PNP and the imprinted ion (Ni²⁺). Copyright © 2006 Society of Chemical Industry     

Synthesis and application of ion‐imprinted resin based on modified melamine–thiourea for selective removal of Hg(II)

A novel Hg(II) ion‐imprinted resin based on thiourea‐modified melamine was manufactured for selective elimination of Hg²⁺ from aqueous solutions. The polymerizable thiourea–melamine ligand together with its Hg(II) complex were extensively investigated using elemental analysis, Fourier transform infrared (FTIR) and ¹H NMR spectroscopies. The Hg(II) complex was used in a condensation polymerization in the presence of formaldehyde crosslinker and then the Hg(II) ions were leached out from the crosslinked polymeric network to finally leave the ion‐imprinted Hg‐PMTF resin. Both ion‐imprinted Hg‐PMTF and non‐imprinted resins were examined utilizing scanning electron microscopy and FTIR spectroscopy. The potential of the prepared resin for selective separation of Hg(II) ions from aqueous solutions was then evaluated by performing a series of batch experiments. Hg‐PMTF displayed an obvious rapid removal of Hg(II) ions with a pseudo‐second‐order kinetic pattern. In addition, the Langmuir adsorption isotherm model exhibited the best fit with the experimental data with comparatively high maximum adsorption capacity (360.5 mg g^?1). © 2015 Society of Chemical Industry     

Preparation and characterization of magnetic molecularly imprinted polymers for selective recognition of 3‐methylindole

In this work, magnetic molecularly imprinted polymers (MMIPs) were used as novel adsorbents for selective adsorption of 3‐methylindole from model oil. The MMIPs were synthesized by precipitation polymerization and surface molecularly imprinted technique, using Fe₃O₄ nanoparticles as magnetically susceptible component, methylacrylic acid as dressing agent and functional monomer, ethylene glycol dimethacrylate as crosslinker, and 3‐methylindole as template molecule. The MMIPs were characterized by Fourier‐transform infrared spectroscopy, scanning electron microscopy, vibrating sample magnetometer, and thermogravimetric analyzer, respectively. The adsorption performances of MMIPs were investigated by batch adsorption experiments in terms of kinetics, isotherms, and selective recognition adsorption, respectively. The results indicate that MMIPs have high recognition ability and fast binding kinetics for 3‐methylindole. Meanwhile, the adsorption equilibrium time was about 2 h and the equilibrium adsorption amount was ～38 mg g^?1 at 298 K. The heterogeneous MMIPs were modeled with pseudo‐second‐order and Langmuir isotherm equation. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 130: 2859–2866, 2013     

Antibody purification using porous metal–chelated monolithic columns

A novel monolithic material was developed to obtain efficient and cost‐effective purification of IgG from human plasma. The porous monolith was obtained by bulk polymerization in a glass tube of 2‐hydroxyethyl methacrylate (HEMA) and N‐methacryloyl‐(L )‐histidine methyl ester (MAH). The poly(HEMA‐MAH) monolith had a specific surface area of 214.6 m²/g and was characterized by swelling studies, porosity measurement, FTIR, scanning electron microscopy, and elemental analysis. Then the monolith was loaded with Cu²⁺ ions to form the metal chelate. Poly(HEMA‐MAH) monolith with a swelling ratio of 74% and containing 20.9 μmol MAH/g was used in the adsorption/desorption of IgG from aqueous solutions and human plasma. The maximum adsorption of IgG from an aqueous solution in phosphate buffer was 10.8 mg/g at pH 7.0. Higher adsorption was obtained from human plasma (up to 104.2 mg/g), with a purity of 94.1%. It was observed that IgG could be repeatedly adsorbed and desorbed with the poly(HEMA‐MAH) monolith without significant loss of adsorption capacity. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 395–404, 2006     

Synthesis of monolithic HPLC stationary phase with self‐assembled molecular recognition sites for 4‐aminophenol

A molecularly imprinted polymer (MIP) monolith for selective recognition of 4‐aminophenol (4‐AMP) was prepared by in situ polymerization technique as high‐performance liquid chromatography (HPLC) stationary phase. For this purpose, several 4‐AMP imprinted monoliths were synthesized by using only methacrylic acid (MAA), acrylamide (AAM), or isobornyl methacrylate (IBMA) in the presence of high amount of crosslinker, ethylene glycol dimethacrylate (EDMA), and these polymeric monolith columns were connected to HPLC to evaluate their separation capabilities. By selection of appropriate functional monomer and optimization of polymerization conditions, MAA‐based monolithic MIP showed good flow through properties, high selectivity to the templated molecule, and high resolution in the separation of paracetamol and its main impurity, 4‐AMP. Besides, effective binding site density and dissociation constant of this monolith were estimated by using frontal chromatography and found as 7.95 μmol/g and 1.06 mM, respectively. Surface area of the same monolith was found as 23.48 m²/g from multipoint BET analysis. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Direct synthesis of surface molecularly imprinted polymers based on vinyl–SiO2 nanospheres for recognition of bisphenol A

Molecularly imprinted polymers (MIP) with high performance in selectively recognizing bisphenol A (BPA) were prepared by using a novel and facile surface molecular‐imprinting technique. Vinyl‐functionalized, monodispersed silica spheres were synthesized by a one‐step emulsion reaction in aqueous solution. Then, BPA surface molecularly imprinted polymers (SMIP) were prepared by polymerization with 4‐vinylpyridine as the functional monomer and ethylene glycol dimethacrylate as the crosslinker. Maximal sorption capacity (Q_max) of the resulting SMIP was up to 600 μmol g^?1, while that of nonimprinted polymers was only 314.68 μmol g^?1. Kinetic binding study showed that sorption capacity reached 70% of Q_max in 20 min and sorption equilibrium at 80 min. SMIP had excellent accessibility and affinity toward BPA, for the selectivity coefficients of SMIP for BPA in respect to phenol, p‐tert‐butylphenol, and o‐phenylphenol were 3.39, 3.35, and 3.02, respectively. The reusage process verified the SMIP owning admirably stable adsorption capacity toward BPA for eight times. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

New generation polymeric nanospheres for catalase immobilization

Monosize poly(2‐hydroxyethyl methacrylate‐co‐N‐methacryloly‐L ‐histidinemethylester) [mon‐poly(HEMA‐MAH)] nanospheres were prepared via surfactant‐free emulsion polymerization method. L ‐Histidine groups of the mon‐poly(HEMA‐MAH) nanospheres were chelated with Fe³⁺ ions. Mon‐poly(HEMA‐MAH) nanospheres were characterized by Fourier transform infrared spectroscopy, proton NMR, and scanning electron microscopy. Particle size of the mon‐poly(HEMA‐MAH) nanospheres was measured by Zeta Sizer. Elemental analysis of MAH for nitrogen was estimated as 0.94 mmol/g polymer. The catalase immobilized onto the mon‐poly(HEMA‐MAH)–Fe³⁺ nanospheres resulted in increasing the enzyme stability with time. Optimum operational temperature for both immobilized preparations was the same, and the temperature profiles of the immobilized preparations were significantly broader. It was observed that enzyme could be repeatedly adsorbed and desorbed on the mon‐poly(HEMA‐MAH)–Fe³⁺ nanospheres without loss of adsorption capacity or enzymic activity. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Preparation and evaluation of magnetic imprinted polymers for 2,4,6‐trinitrotoluene by surface imprinting

A safe and facile approach for the preparation of magnetic molecularly imprinted polymer nanospheres for 2,4,6‐trinitrotoluene (TNT) recognition is reported. The imprinted nanospheres were synthesized using TNT as the imprinting molecule, acrylamide as the functional monomer, N,N'‐methylenebisacrylamide as the crosslinker and magnetic particles as the support. The structure of the materials was identified via Fourier transform infrared spectroscopy, X‐ray photoelectron spectroscopy and transmission electron microscopy. Static adsorbing experiments were carried out and Scatchard plot analysis showed that two kinds of receptor sites were formed in the imprinted materials. The adsorption equilibrium constant and the maximum adsorption capacity were evaluated. These results indicated that the imprinted nanospheres have higher adsorption capacity and selectivity for TNT than non‐imprinted polymer nanospheres with the same composition. © 2013 Society of Chemical Industry     

Reversible immobilization of glycoamylase by a variety of Cu2+‐chelated membranes

Glycoamylase (AMG) is an γ‐amylase enzyme which catalyzes the breakdown of large α(1,4)‐linked malto‐oligosaccharides to glucose. It is an extracellular enzyme and is excreted to the culture medium. In this study, AMG was immobilized on a variety of metal affinity membranes, which were prepared by chelating Cu²⁺ ions onto poly(hydroxyethyl methacrylate) (PHEMA) using N‐methacryloyl‐(L )‐histidine methyl ester (MAH), N‐methacryloyl‐(L )‐cysteine methyl ester (MAC), and N‐methacryloyl‐(L )‐phenylalanine methyl ester (MAPA) as metal‐chelating comonomers for reversible immobilization of AMG. The PHEMAH, PHEMAC, PHEMAPA membranes were synthesized by UV‐initiated photo‐polymerization and Cu²⁺ ions were chelated on the membrane surfaces. Cu²⁺‐chelated membranes were characterized by swelling tests, SEM, contact angle measurements, elemental analysis, and FTIR. AMG immobilization on the Cu²⁺‐chelated membranes was performed by using aqueous solutions of different amounts of AMG at different pH values and Cu²⁺ loadings. Durability tests concerning desorption of AMG and reusability of the Cu²⁺‐chelated membranes yielded acceptable results. It was computationally determined that AMG possesses four likely Cu²⁺/Zn²⁺ binding sites, away from the catalytic site, to which the metal‐chelated membranes can be efficiently used. © 2012 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Molecularly Imprinted Ion-Exchange Resin for Fe3+

Abstract

Ion exchange resins selective for the sequestration of Fe³⁺ from aqueous solutions containing citrate were prepared by the molecular imprinting technique. Sorption characteristics of imprinted resins prepared with high (85 mole%) and low (3 mole%) amounts of covalent cross‐linking were examined. Experiments to determine loading capacity and selectivity, relative to several metal ions of physiological significance, were performed. The Fe³⁺ capacity of the highly cross‐linked resin was larger but the selectivity was lower.