Grafting of methyl methacrylate (MMA) onto Antheraea assama silk fiber

Graft copolymerization of methyl methacrylate (MMA) onto nonmulberry silk fiber Antheraea assama was investigated in aqueous medium using the KMnO₄–oxalic acid redox system. Grafting (%) was determined as a function of the reaction time, temperature, and monomer and initiator concentrations. The rate of grafting increased progressively with increase of the reaction time up to 4 h and then decreased. The extent of grafting was maximum at 55°C. The extent was also dependent upon monomer and initiator concentrations up to 75.5 × 10^?2 and 6 × 10^?3 M, respectively. The grafted products were evaluated by infrared spectroscopy and their thermal decompositions were studied by TG and DTG techniques in static air at 20°C min^?1 and 30°C min^?1 in the range 30–800°C. The kinetic parameters for ungrafted and grafted fibers were evaluated using the Coats and Redfern method. The grafted products were found to be thermally more stable than were those of the ungrafted fibers. The surface characteristics of the ungrafted and grafted fibers were evaluated by scanning electron microscopy. The water‐retention values (WRVs) of the grafted fibers were in decreasing order with increase in the grafting (%). © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 81: 2633–2641, 2001     

One simple and stable coating of mixed‐charge copolymers on poly(vinyl chloride) films to improve antifouling efficiency

An antifouling surface is highly desirable for many biomedical applications. In this study, poly(vinyl chloride) (PVC) films were endowed with the improved properties of resisting nonspecific protein adsorption and platelet adhesion simply through being coated with a kind of mixed‐charge zwitterionic polymer, poly(3‐sulfopropyl methacrylate–methacrylatoethyl trimethyl ammonium chloride–glycidyl methacrylate) (PSTG), with random moieties of negatively charged 3‐sulfopropyl methacrylate potassium, positively charged [2‐(methacryloyloxy)‐ethyl] trimethylammonium chloride, and glycidyl methacrylate. The PSTG‐grafted PVC films were formed by the simple immersion of an amino‐functionalized PVC film into a PSTG solution. A grafting density of 220.84 µg/cm² of PSTG4‐grafted PVC film was successfully obtained. The PSTG4‐grafted PVC film showed a lower contact angle (37.5 °) than the ungrafted PVC film (98.3 °). The in vitro protein adsorption results show that the bovine serum albumin adsorption amount decreased 6.72 µg/cm² in the case of the PSTG4‐grafted PVC film, whereas that on the ungrafted PVC film was 28.54 µg/cm². So, PSTG‐grafted PVC films could be promising materials for medical devices. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 44632.     

Preparation and property of poly(vinyl alcohol) grafted with butyl glycidyl ether

The crosslinked polyvinyl alcohol (CPVA) and alkyl chain grafted CPVA (CPVA‐g‐BGE) were prepared through the addition reaction of epoxy group of epichlorohydrin and butyl glycidyl ether (BGE) with the hydroxyl group of PVA. By FTIR and ¹HNMR analysis, BGE was confirmed to be grafted onto the molecular chain of PVA successfully. By grafting with BGE, the area of the stress–strain curves of CPVA increased, and the elongation at break increased remarkably with little drop of the tensile strength. Much rougher fractured surface with folds was observed, indicating the increased toughness of CPVA. The relaxation peak corresponding to the glass transition temperature (T_g) of CPVA shifted to low temperature with increasing grafting ratio of BGE. When compared with CPVA, the crystallization ability of CPVA‐g‐BGE decreased, indicating that although the intermolecular hydrogen bonding of PVA was weakened by grafting with alkyl chain, appropriate intermolecular association of alkyl chain facilitated the formation of physical entanglement of molecular chains to strengthen and toughen the PVA matrix. Ink contact angles of CPVA‐g‐BGE decreased with increasing grafting ratio of BGE, indicating the increasing compatibility of CPVA with ink, which was advantageous for PVA to be used as surface sizing agent in papermaking. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Polymer-based metal adsorbents via graft copolymerization of polyvinyl alcohol with diaminomaleonitrile: A green chemistry approach

Synthesis, characterization, and amidoximation of diaminomaleonitrile-functionalized polyvinyl alcohol (PVA) grafts were studied. Ceric ammonium nitrate (CAN) was used as an initiator in an aqueous nitric acid medium under N₂ atmosphere. Optimum conditions for grafting were as follows: monomer concentration [DAMN] = 1.4M, [CAN] = 16 × 10⁻² mol/L, T = 50°C, and t = 2 h. Water uptake of the PVA graft films increased with the increase of grafting yield. The imparted cyano group of the grafted PVA polymer chains (with degree of grafting up to 136%) was converted into amidoxime group by the reaction with hydroxylamine hydrochloride. The grafted polymers were characterized by FTIR spectroscopy, differential scanning calorimetry, and thermal gravimetric analysis. The grafted PVA films are more thermally stable than the ungrafted PVA membrane, because the grafted membrane showed a single degradation pattern despite having two components. A decrease in T_g values is observed as the grafting yield of copolymers increases indicating the incorporation of polydiaminomaleonitrile chains in amorphous copolymers with higher thermal stability. The prepared amidoximated DAMN136-g-PVA was investigated for its properties in removing heavy toxic metals, such as Pb²⁺, Cd²⁺, Zn²⁺, Fe³⁺, Cu²⁺, Ni²⁺, and Co²⁺ from water. The amidoximated film is characterized by a considerably greater binding ability with respect to heavy metals. The nature of the metal ion also has great importance in the amount binding to the polymeric material. The kinetics of the sorption/desorption process for Co²⁺, Ni²⁺, and Zn²⁺ were investigated. © 2012 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Control of biodegradability of poly(3‐hydroxybutyric acid) film with grafting acrylic acid and thermal remolding

Radiation‐induced graft polymerization of acrylic acid (AAc) on poly(3‐hydroxybutyric acid) (PHB) film was carried out and the resulting film was thermally‐remolded. The PHB films grafted with AAc (PHB‐g‐AAc) having a degree of grafting higher than 5% completely lost the enzymatic degradability. The enzymatic degradability of the grafted film was recovered by thermal remolding. The highest enzymatic degradation rate was observed at degree of grafting of 10% after thermal remolding. The PHB‐g‐AAc films and thermally‐remolded PHB‐g‐AAc films were characterized by contact angle and differential scanning calorimetry. The enzymatic degradability of PHB‐g‐AAc films was lost by the grafted AAc, which covered the surface of PHB film. The acceleration of enzymatic degradation in the remolded PHB‐g‐AAc films was mainly caused by decrease of crystallinity of PHB by dispread of grafted AAc during thermal remolding. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 3856–3861, 2006     

Synthesis and kinetics of ascorbic acid initiated graft copolymerized delignified cellulosic fiber

Graft copolymerization of delignified Grewia optiva fiber with methyl methacrylate (MMA) as vinyl monomer was attempted using ascorbic acid/H₂O₂ as redox initiator. Different reaction conditions affecting the grafting percentage (P_g) were optimized to get the maximum P_g (32.56%) of MMA onto delignified Grewia optiva fibers. Grafted and ungrafted fibers were subsequently subjected to evaluation of physico‐chemical properties such as swelling behavior and acid and alkali resistance. The rate expression for the grafting reaction (R_g = k [ASC]^0.12 [H₂O₂]^0.53 [MMA]^0.05) was evaluated and a suitable mechanism for grafting was suggested. The overall activation energy of the copolymerization reaction was found as 11.97 kJ mol^?1 at temperature range 25–65°C. Further, morphological and structural analysis of raw, delignified, and grafted Grewia optiva‐g‐poly(MMA) were studied by using Fourier‐transform Infrared spectroscopy, scanning electron microscopy, X‐ray diffraction, and thermogravimetric analysis.The tensile properties of grafted and ungrafted fiber samples were also reported. POLYM. ENG. SCI., 55:474–484, 2015. © 2014 Society of Plastics Engineers     

In vitro release of salicylic acid through poly(vinyl alcohol‐g‐itaconic acid) membranes

In this study, itaconic acid (IA) was grafted on poly(vinyl alcohol) (PVA) at two different grafting percentages, 7.0% (w/w) and 14.0% (w/w), and membranes were prepared from the grafted copolymer (PVA‐g‐IA). Performances of PVA and PVA‐g‐IA membranes for the transdermal release of salicylic acid (SA) at in vitro conditions were investigated by using 2.0 mg/mL SA solutions. Effect of the pH on the release of SA was studied by keeping pH of donor and acceptor solutions in a range of (2.1–7.4). Permeation studies were also carried on at different SA concentrations. Effect of temperature on the release of SA was investigated in the temperature range of (32–39) (±1)°C. Results showed that presence of IA decreased the release of SA from the PVA membranes and 73% SA was released at the end of 48 h at (32 ± 1)°C from the IA‐1 membranes. pH affected the release of SA through the grafted membranes and studies showed that release of SA was high with donor solution pH of 2.1. When the pH of donor and receiver solutions were kept at the same pH value, the overall SA% in permeate increased. Increase in concentration of SA decreased the release of SA for the studied membranes. Release of SA from PVA‐g‐IA membranes was temperature sensitive and increase in temperature from (32 ± 1)°C to (39 ± 1)°C increased the release percentage of SA by 24% (w/w). The overall activation energy for the permeation of SA through IA‐1 membrane was found to be 22.97 kJ/mol. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Polyacrylonitrile‐g‐poly(vinyl alcohol) membranes for the pervaporation separation of dimethyl formamide and water mixtures

Poly(vinyl alcohol) as well as its grafted copolymer membranes with polyacrylonitrile (PAN‐g‐PVA) were prepared and used to separate water and dimethyl formamide mixtures by the pervaporation technique. The three following membranes were prepared: (1) pure PVA; (2) 46% grafted PAN‐g‐PVA; and (3) 93% grafted PAN‐g‐PVA. Pervaporation separation experiments were carried out at 25°C for the feed mixture containing 10 to 90% water. By use of the transport data, permeation flux, separation selectivity, swelling index, and diffusion coefficients have been calculated. By increasing the grafting of the membrane, flux decreased, whereas separation selectivity increased slightly over that of pure PVA membrane. Arrhenius activation parameters for transport processes were calculated for 10 mass % water containing feed mixture by using flux and diffusion data obtained at 25, 35, and 45°C. Transport parameters were discussed in terms of sorption‐diffusion principles. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 91: 4091–4097, 2004     

Poly(styrene)‐ and Poly(styrene‐co‐methyl methacrylate)‐graft‐hydrogenated natural rubber latex: Aspect on synthesis,properties, and compatibility

The undesirable properties of natural rubber (NR) can be improved via hydrogenation and graft copolymerization. Hydrogenated NR (HNR) latex was prepared via diimide reduction and then grafted with styrene (ST) or ST/methyl methacrylate (MMA) to form poly(ST)‐graft‐HNR (poly(ST)‐g‐HNR, GHNRS) or poly(ST‐co‐MMA)‐g‐HNR (GHNRSM), respectively. For the grafting of ST monomer onto HNR particles, the %monomer conversion and %grafting efficiency (%GE) were monitored as functions of %hydrogenation, monomer and initiator concentrations, temperature, and time. Under the optimum condition (HNR with 54.3% hydrogenation; 100 phr of ST, 1 phr of initiator at 50°C for 8 h), maximum %conversion and %GE of 44.6% and 36.9%, respectively, were achieved. Thermogravimetric analysis revealed that the HNR grafted with ST or ST/MMA had higher decomposition temperature than an ungrafted one. When these graft products were blended at 10% (w/w) with acrylonitrile‐butadiene‐styrene (ABS) resin, the GHNRS/ABS and GHNRSM/ABS composites exhibited the higher flexural strength and heat aging tolerance compared to the ungrafted HNR/ABS composite. Scanning electron microscopy (SEM) also showed the higher degree of homogeneity at the fractural surface, supporting the higher compatibility between the ABS and the GHNRS or GHNRSM phases in the blends. J. VINYL ADDIT. TECHNOL., 22:100–109, 2016. © 2014 Society of Plastics Engineers     

Grafting of poly(vinyl alcohol) on natural rubber latex particles

Poly(vinyl alcohol) (PVA) was grafted on natural rubber (NR) latex particles (NR‐g‐PVA) using potassium persulfate to generate active radicals on both NR particle surface as well as PVA molecules. ¹H‐ and ¹³C‐nuclear magnetic resonance spectroscopy suggested a possibly chemical attachment of PVA on the NR. The amount of graft‐PVA expressed in term of grafting percentage (%G) increased almost linearly with the amount of PVA adding to the NR latex. Measuring by dynamic light scattering, the particle size of NR‐g‐PVA particles was larger than the size of unmodified NR, also it increased with the molecular weight and %G of PVA. Transmission electron microscopy images of the NR‐g‐PVA latex particles revealed that the size of PVA‐grafted NR particle was enlarged by a layer of graft‐PVA surrounding the NR particle. Given by the graft‐PVA layer surrounding NR particles, the NR‐g‐PVA latex particles possessed better colloidal stability as lowering pH compared with the unmodified NR latex. Comparing with unmodified NR particles, the electrophoretic mobility of NR‐g‐PVA particles was lower due to the presence of graft‐PVA that shifted the shear plane further away from the surface of the particles. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Synthesis and characterization of a poly(acrylic acid)‐graft‐methoxy poly(ethylene oxide) comblike copolymer

A methoxy poly(ethylene oxide) (MPEO) grafted poly(acrylic acid) (PAA) comblike copolymer was synthesized by the direct condensation of MPEO onto the PAA backbone in the presence of dicyclohexyl dimethylcarbodiimide (DCC) and 4‐dimethylaminopyridine (DMAP). Its chemical structure was characterized by Fourier transform infrared and ¹H‐NMR spectroscopies. The effects of different catalysts, solvents, reaction temperatures, and reaction times on the grafting degree of the PAA‐g‐MPEO comblike copolymer were investigated. Compared to p‐toluene sulfonic acid, DMAP/DCC as a catalyst markedly increased the grafting degree. The optimum reaction conditions were a tetrahydrofuran/water mixture solvent, a reaction temperature of 50°C, and a reaction time of 168 h. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Tensile properties of a poly(vinyl chloride) composite filled with poly(methyl methacrylate) grafted to oil palm empty fruit bunches

The influence of oil palm empty fruit bunch (OPEFB) fiber and oil palm empty fruit bunches grafted with poly(methyl methacrylate) (OPEFB‐g‐PMMA) on the tensile properties of poly(vinyl chloride) (PVC) was investigated. The OPEFB‐g‐PMMA fiber was first prepared with the optimum conditions for the grafting reaction, which were determined in our previous study. To produce composites, the PVC resin, OPEFB‐g‐PMMA fiber or ungrafted OPEFB fiber, and other additives were first dry‐blended with a laboratory blender before being milled into sheets on a two‐roll mill. Test specimens were then hot‐pressed, and then the tensile properties were determined. A comparison with the composite filled with the ungrafted OPEFB fiber showed that the tensile strength and elongation at break increased, whereas Young's modulus decreased, with the incorporation of 20 phr OPEFB‐g‐PMMA fiber into the PVC matrix. The trend of the tensile properties obtained in this study was supported by functional group analysis, glass‐transition temperature measurements, and surface morphological analysis. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Characterization of poly(vinyl alcohol) grafted with acrylic acid and methylmethacrylate using a Ce(IV) glucose redox system

Poly(vinyl alcohol) (PVA) is a well-known biomedical polymer and is biocompatible. Methylmethacrylate and acrylic acid monomers were grafted onto PVA using a Ce(IV)–glucose redox system at three different temperatures (35, 45, and 55°C) under nitrogen atmosphere. More than 80% grafting could be achieved in the process. The grafted PVA was characterized through infrared spectra, thermal decomposition studies [thermogravimetric analysis (TGA) and decomposition thermal grafting (DTG)], differential scanning calorimetry (DSC), and scanning electron microscopy (SEM). The thermal stability and other properties of grafted PVA related to medical applications was found to be better than those of ungrafted PVA. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 73: 677–683, 1999     

Synthesis and characterization of graft copolymer (guar gum–g–N‐vinyl‐2‐pyrrolidone) and investigation of metal ion sorption and swelling behavior

Graft copolymer of N‐vinyl‐2‐pyrrolidone with guar gum was synthesized and its reaction conditions were optimized for better yield using potassium peroxymonosulfate (PMS) and glycolic acid (GA) as a redox initiator. The effect of PMS, GA, hydrogen ions, guar gum, and N‐vinyl‐2‐pyrrolidone (NVP) along with reaction time and temperature were studied by determining the grafting parameters: grafting ratio, efficiency, conversion, add‐on, homopolymer, and rate of grafting. It was observed that the maximum yield occurred at with a time of 120 min at a temperature of 45°C and a guar gum concentration of 0.4 g/L concentration. The graft copolymer was characterized by infrared spectroscopy and thermal analysis. The activation energy for the grafted and ungrafted gum was calculated. It was observed that the graft copolymer was thermally more stable than the pure gum. The swelling and metal ion sorption behavior of guar gum and guar gum‐g‐N‐vinyl‐2‐pyrrolidone also were studied. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 2480–2489, 2006     

Solid state grafting copolymerization of acrylamide onto poly(vinyl alcohol) initiated by redox system

A solid state grafting copolymerization of acrylamide (AM) onto poly(vinyl alcohol) (PVA) was conducted with ammonium persulfate and sodium bisulfite redox system as initiators. Before the reaction the PVA powder and required amount of AM were mixed evenly, and sprayed with water to swell the PVA powder and to dissolve AM. Then the swollen PVA powder was sprayed with the redox solution, and the reaction temperature was controlled at a temperature between 30°C and 80°C for 120 min. The grafting percentage and efficiency were determined as functions of monomer/PVA ratio, initiator concentration and reaction temperature. The structure and performance of the graft copolymers were confirmed by FTIR‐ATR, XRD, ¹³C NMR, and thermogravimetric analysis, together with mechanical property and apparent viscosity measurements. It has been confirmed that grafting copolymerization of AM onto PVA initiated by this redox system occurred with higher grafting percentage and efficiency in the solid state. The thermal stability and water‐solubility of grafted PVA were found to be better than those of unmodified PVA. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 39938.     

Study on antithrombosis dialytic membrane prepared by preirradiation grafting

A new antithrombosis dialytic membrane with a hydrophilic–hydrophobic microphase structure was prepared by preirradiation grafting of β‐hydroxyethyl methacrylate (HEMA) and styrene (St) onto ethylene–vinyl acetate (EVA). The influence of some effects, such as preirradiation dose, dose rate, grafting reaction temperature, reaction time, and monomer component, on the degree of grafting was determined, and the properties of the grafted films were investigated. Compared with the conventional EVA‐grafted hydrophilic monomer, the EVA films grafted with HEMA and St have superior antithrombogenicity; the antithrombogenicity and permeability of EVA‐g‐(HEMA‐co‐St) were 30 and 20 times higher than those of the ungrafted films, respectively, when the volume ratio (HEMA versus St) was about 7:3. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 78: 1321–1327, 2000     

Cotton‐fabric‐grafted poly(N‐isopropyl acrylamide) initiated by ammonium peroxydisulfate

In this article, we report that thermoresponsive poly(N‐isopropyl acrylamide) (PNIPAAm) was successfully grafted onto a cotton fabric (CF) surface by free‐radical solution grafting polymerization; we obtained a thermoresponsive CF‐grafted PNIPAAm. This reaction system only contained four constituents: the monomer, solvent, initiator, and CFs. Ammonium peroxydisulfate was chosen as the initiator, and water was chosen as the solvent. A series of initiator concentrations and grafting polymerization temperatures were used in the experiments, and their effects on the grafting ratio (G) were also studied. Also, the effects of the G of CF‐g‐PNIPAAm on their corresponding thermoresponses was studied further. The structure of CF‐g‐PNIPAAm was characterized by Fourier transform infrared spectroscopy–attenuated total reflectance analysis and scanning electron microscopy analysis. The G of CF‐g‐PNIPAAm was measured by a gravimetric method. The thermoresponse of CF‐g‐PNIPAAm was characterized by modulated differential scanning calorimetry, water contact angle measurements, and wetting time measurements. The experiments manifested the following results: (1) the initiator concentration and grafting polymerization temperature both influenced G, (2) the grafted PNIPAAm covered the CF surface, (3) the CF‐g‐PNIPAAm showed thermoresponsive hydrophilicity/hydrophobicity, and (4) a relationship existed between the thermoresponse of CF‐g‐PNIPAAm and the corresponding G. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 41193.     

Reaction kinetics of graft copolymerization and thermochemical studies of the degradation of poly(vinyl alcohol) graft copolymer

Poly(vinyl alcohol) (PVA) is a water‐soluble and biomedical polymer. 2‐Acrylamido‐2‐methyl‐1‐propanesulfonic acid was grafted onto PVA using ammonium persulfate as radical initiator. The influences of synthesis conditions such as temperature, concentrations of initiator, PVA and monomer were investigated. Both the initial rate of grafting and the final percentage of grafting were increased by an increase in reaction temperature. The reaction kinetics were studied to determine the rate constants of the first‐order reactions. An activation energy of 16.3 kJ mol^?1 was found for the grafting reaction. The graft copolymers were characterized by IR and intrinsic viscosity measurements. A proposed mechanism of the grafting reaction is discussed. Kinetics of the thermal degradation were studied using a thermogravimetric method and the order of thermal stabilities are given. The apparent activation thermodynamic parameters, E_a, ΔH*, ΔS* and ΔG* were determined and correlated to the thermal stabilities of the homo‐ and grafted polymers. © 2001 Society of Chemical Industry     

Preparation of soapless latexes by sonification of starch-based poly(isoprene–co–acrylonitrile) graft reaction mixtures

Graft copolymerization of isoprene (IP) and acrylonitrile (AN) onto gelatinized starch (S) and cationic starch having quaternary amine functionality through cerium(IV) initiation gave grafted side chains of poly(IP–co–AN). Grafts of various compositions are obtained by controlling the amounts and ratios of monomers added to starch. IP alone does not homograft onto gelatinized starch at 25° or 50°C by cerium(IV) initiation and requires the presence of an “initiator–monomer” such as AN to obtain copolymer side chains. Although cografting of IP and AN onto starch depends on AN to initiate radical chains, the ratio employed of the two monomers is critical for graft polymerization to occur. For example, at a molar ratio of IP to AN of 1 or greater, little polymer was produced; at molar ratios in the range of 0.4 to 0.67, considerable amounts of polymer were produced; and at a molar ratio of 0.13 or less, polymerization of AN was greatly retarded. Concentration of HNO₃ in the cerium(IV) reagent and reaction temperature also influence the grafting reaction. Lower HNO₃ concentrations favor grafting at 50°C, while higher acid concentrations favor grafting at 25°C. Starch graft reaction mixtures were sonified at 20 kHz to form latexes that air dry to clear pliable films. Poly(IP–co–AN) obtained by acid hydrolysis of the starch portion of the grafts failed to dissolve in either dimethylformamide or benzene, thus indicating presence of crosslinks. S–g–poly(IP–co–AN), having about one third starch and grafted side chains averaging about 2 parts polymerized IP per part of polymerized AN, was masticated on steel rolls at 100°C to a tough pliable film which was subsequently vulcanized to a rubber.     

Adhesion of ultrahigh molecular weight polyethylene plates photografted with hydrophilic monomers and evaluation of failure location by X‐ray photoelectron spectroscopy

In this study, methacrylic acid (MAA) and acrylic acid (AA) were photografted onto the ultrahigh molecular weight polyethylene (UHMWPE) plates at different monomer concentrations and temperatures, and the grafted UHMWPE plates were bonded with aqueous polyvinyl alcohol (PVA) solutions. The tensile shear adhesive strength of both grafted UHMWPE plates was also discussed in relation to wettability and water absorptivity. The location of failure was also estimated by X‐ray photoelectron spectroscopy (XPS). Wettability of the MAA‐grafted UHMWPE plates became constant, when the UHMWPE surface was fully covered with grafted PMAA chains. Conversely, wettability of the AA‐grafted UHMWPE plates passed through the maximum value and then gradually decreased against the grafted amount probably due to aggregation of grafted PAA chains. Water absorptivity of the grafted layers formed at lower monomer concentrations or temperatures sharply increased at lower grafted amounts. The adhesive strength increased with the grafted amount and substrate breaking was observed at higher grafted amounts, indicating that a main factor to increase the adhesive strength is the formation of a grafted layer by shorter grafted polymer chains and/or the restriction of the location of photografting to the outer surface region. In addition, surface analysis by XPS showed that failure occurred in the boundary between the layer composed of grafted polymer chains and PVA chains and the ungrafted layer at a low adhesive strength, and the location of failure was shifted to the grafted layer containing PVA chains at the grafted amount increased. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40133.