Poly(L‐lactic acid) with added α‐tocopherol and resveratrol: optical,physical, thermal and mechanical properties

Poly(L ‐lactic acid) (PLLA) films containing various concentrations of two natural antioxidants, α‐tocopherol and resveratrol, were fabricated by a melt compounding and compression molding process. The influence of the antioxidants on the optical properties such as color and UV‐visible light transmission was analyzed. The thermal, mechanical, rheological and physical properties of PLLA films with added antioxidants were assessed. PLLA films with added α‐tocopherol and resveratrol showed a yellowish brown color and the lightness was influenced by the presence of the antioxidants. The glass transition and melting temperatures were significantly reduced with the addition of antioxidants while enhanced thermal stability was observed, which could be a benefit and important for processing and production. PLLA films with added antioxidants were slightly more hydrophobic than neat PLLA. The combination effect of plasticizing and enhancement of the elastic modulus with differing concentrations of two antioxidants played a critical role in the mechanical and thermomechanical properties of PLLA films. The melt viscosity of the PLLA films with added antioxidants was substantially higher than that of neat PLLA. The higher melt viscosity and G′(ω) could be an indication of formation of entanglement between PLLA and the two antioxidants. Copyright © 2012 Society of Chemical Industry     

Preparation,characterization, and oxygen scavenging capacity of biodegradable α‐tocopherol/PLA microparticles for active food packaging applications

In this work, a biodegradable oxygen scavenger system, which consists of α‐tocopherol‐loaded poly(lactic)acid microparticles containing 40 wt% of the natural antioxidant agent, was prepared by an oil in water (O/W) emulsion‐solvent evaporation method. The preparation procedure assured high encapsulation efficiency and production yield and gives no noticeable alteration of the molecular structure of the microencapsulated active α‐tocopherol, as demonstrated by Fourier‐transform infrared and thermogravimetric analyses measurements. The produced active microparticles are semicrystalline and are characterized by suitable morphology (size and shape) to have satisfactory flowability to be used as active powder additive in conventional polymer extrusion technologies. Both the scavenging capacity and rate are in line with the values required for an effective oxygen scavenger system. POLYM. COMPOS., 38:981–986, 2017. © 2015 Society of Plastics Engineers     

Mechanical,thermal, and electrical conducting properties of CNTs/bio‐degradable polymer thin films

The objective of this study is to increase mechanical, thermal, and electrical properties of plasticizer free thermoplastic bio polymer, BIOPLAST GS 2189 (BP), a blend of poly lactic acid (PLA) and potato starch. This polymer is highly suitable for sheet molding, film processing; blown film extrusion and injection molding and fully biodegradable. Structural, mechanical, thermal, and electrical properties of these films were manipulated by reinforcement of multiwalled carbon nanotubes (CNTs) in BP. Thin films of various (1–5 wt %) percentages of CNTs/BP were prepared by using a high‐speed spin coating technique. These as‐prepared films are ～60–100 µm in thickness. The thickness measurements of these films were carried out using micrometry and optical microscopy. The maximum tensile strength (200%) and modulus (150%) was observed for 4 wt % loading of CNTs in BP as compared with the neat BP thin film. The X‐ray diffraction results show that the addition of CNTs in BP increases the crystallinity of BP. Electrical conductivity of this film also increased by 48% as compared with the neat BP polymer films. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Process efficiency and long‐term performance of α‐tocopherol in film‐blown linear low‐density polyethylene

α‐Tocopherol was compared with a commercial phenolic antioxidant (Irganox 1076) as a long‐term and process antioxidant in film‐blown and compression‐molded linear low‐density polyethylene. The antioxidant function of α‐tocopherol was high in the film‐blown material, especially in the processing, according to oxygen induction time measurements with differential scanning calorimetry. The residual content of α‐tocopherol after processing, determined with chromatographic techniques, was less than that of the commercial phenolic antioxidant in both the film‐blown and compression‐molded materials. The process stabilizing efficiency was nevertheless higher for the material containing α‐tocopherol. During the long‐term stabilization, the efficiency of α‐tocopherol was less than that of the commercial phenolic stabilizer Irganox 1076 in the thin films, according to chemiluminescence and infrared measurements. The long‐term efficiency in the compression‐molded samples stabilized with α‐tocopherol or Irganox 1076 was equally good because of the low loss of both α‐tocopherol and Irganox 1076 from the thicker films. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 98: 2427–2439, 2005     

Novel Self‐Reinforced Films Based on Poly (3‐Hydroxybutyrate‐Co‐3‐Hydroxyvalerate) (PHBV) and PHBV Microparticles

Biodegradable self‐reinforced films of poly (3‐hydroxybutyrate‐co‐3‐hydroxyvalerate) (PHBV) and PHBV microparticles were prepared through the solvent casting method (srPHBV). Differential scanning calorimetry (DSC), wide angle X‐ray scattering (WAXS) and polarized optical microscopy results confirmed the nucleating effect of PHBV microparticles. WAXS proved that diffractograms of PHBV and srPHBV‐6 films at room temperature contain the main characteristic diffraction peaks of an orthorhombic α‐type crystalline structure. Small angle X‐ray scattering (SAXS) showed a similar decrement rate of long spacing in PHBV and srPHBV films. SAXS/WAXS data revealed that when the amount of filler was increased, lamellae thickness grew. Transmission electron microscopy images illustrated well filler dispersion in the srPHBV films. Scanning electron microscopy results exhibited a significant reduction in porosity for srPHBV films once the PHBV microparticles were added. Atomic force microscopy analysis showed higher surface roughness after filler incorporation. Samples of srPHBV films showed higher barrier properties against water vapor, oxygen, and carbon dioxide. Combined properties of srPHBV films revealed the possibility of being suitable candidates for food packaging applications. POLYM. ENG. SCI., 59:E120–E128, 2019. © 2018 Society of Plastics Engineers     

Development and material properties of poly(lactic acid)/poly(3‐hydroxybutyrate‐co−3‐hydroxyvalerate)‐based nanocrystalline cellulose nanocomposites

This study is focused on the development and analysis of the thermal and structural behavior of nanocrystalline cellulose (NCC)‐based bionanocomposites (BCs). Nanocrystalline cellulose was prepared by controlled acid hydrolysis of oil palm empty fruit bunch fibers. The resulting NCC was surface modified using TEMPO‐mediated oxidation and solvent exchange methods for surface functionalization and also to improve dispersion of fillers. Solvent exchange NCC reinforced polymer blend containing poly(lactic acid)/poly‐(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate) was prepared by using solution casting technique at various NCC loading percentages. The addition of NCC resulted in the improvement of structural, thermal, and mechanical properties of BCs as compared to that of the polymer blend. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 44328.     

Enhanced oxygen‐barrier and water‐resistance properties of poly(vinyl alcohol) blended with poly(acrylic acid) for packaging applications

To enhance the oxygen‐barrier and water‐resistance properties of poly(vinyl alcohol) (PVA) and expand its food packaging applicability, five crosslinked poly(vinyl alcohol)/poly(acrylic acid) (PVA/PAA) blend films were prepared via esterification reactions between hydroxyl groups in PVA and carboxylic acid groups in PAA. The physical characteristics of the blends, including the thermal, barrier, mechanical and optical properties, were investigated as a function of PAA ratio. With increasing PAA content, the crosslinking density was significantly increased, resulting in changes in the chemical structure, morphology and crystallinity of the films. The oxygen transmission rate of pure PVA decreased from 5.91 to 1.59 cc m^?1 day^?1 with increasing PAA ratio. The water resistance, too, increased remarkably. All the blend films showed good optical transparency. The physical properties of the blend films were strongly correlated with the chemical structure and morphology changes, which varied with the PAA content. © 2016 Society of Chemical Industry     

PLA/functionalized‐gum arabic based bionanocomposite films for high gas barrier applications

The present work focuses on the microwave synthesis of lactic acid‐grafted‐gum arabic (LA‐g‐GA) by polycondensation reaction and its influence as an additive to improve the gas barrier properties of poly(lactic acid) (PLA) films, prepared by solution casting method. It is observed that during the synthesis of LA‐g‐GA, hydrophilic gum is converted into hydrophobic due to grafting of in situ grown hydrophobic oligo‐(lactic acid). Subsequently, PLA/LA‐g‐GA bionanocomposite films are fabricated and characterized for structural, thermal, mechanical and gas barrier properties. Path breaking reduction in oxygen permeability (OP) of ～10 folds is achieved in case of PLA films containing LA‐g‐GA as filler. However, water vapor transmission rate (WVTR) is reduced up to 27% after 5 wt % addition of filler. Reduction in OP of this order of magnitude enables the PLA to compete with PET in term of enhancing shelf life and maintaining the food quality. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43458.     

Incorporation of polyfluorenes into poly(lactic acid) films for sensor and optoelectronics applications

Films of neat and plasticized biodegradable poly(lactic acid) (PLA) matrices containing anionic conjugated polyelectrolytes, poly[9,9‐bis(4‐phenoxybutylsulfonate)]fluorene‐2,7‐diyl‐alt‐arylenes, with 1,4‐phenylene and 4,4″‐p‐terphenylene, respectively, as arylene groups or a neutral poly(9,9‐dialkylfluorene) for comparison were prepared by solution casting. These films were characterized using differential scanning calorimetry, thermogravimetry, scanning electron microscopy and fluorescence spectroscopy. In addition, the effects of plasticizer on the thermal properties and the oxygen permeability of the PLA films were measured through the oxygen transmission rate. Results show that it is possible to obtain thin, optically transparent and luminescent films with potential in oxygen sensing, exhibiting good thermal and photochemical stability. At high polyelectrolyte content, evidence is found for phase separation and aggregate formation and it is no longer possible to obtain completely homogeneous films. The possibility of incorporating the cationic metal complex tris(2,2′‐bipyridyl)ruthenium(II) into plasticized PLA films containing conjugated polyelectrolytes for dual‐wavelength ratiometric luminescence sensing is also discussed. Copyright © 2012 Society of Chemical Industry     

Fabrication of starch‐g‐poly(l‐lactic acid) biocomposite films: Effects of the shear‐mixing and reactive‐extrusion conditions

In this study, we developed a new approach for the fabrication of a green poly(l ‐lactic acid)‐grafted starch (St‐g‐PLA) copolymer and nanocomposite (St‐g‐PLA/organoclay)‐based films via shear‐mixing and reactive‐extrusion systems. The chemical and physical structures, thermal behavior, and morphology of the synthesized blends and some other parameters were examined by Fourier transform infrared spectroscopy and ¹³C cross‐polarization/magic angle spinning NMR spectroscopy, X‐ray diffraction, thermogravimetric analysis–derivative thermogravimetry, and scanning electron microscopy, respectively. Significant increases in the mechanical and permeability properties were evident in the high value of grafted poly(lactic acid) molar percentages and high exfoliation of organoclay. The biodegradability of films were investigated under aerobic composting conditions through the measurement of the temperature, moisture, pH, consumed O₂ value, and carbon dioxide produced. This new strategy mainly improved the good adhesion between both phases, and it was an interesting method for the production of environmentally friendly biocomposites that could easily be scaled up for commercial production with the potential for replacing petroleum‐based plastics. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 44490.     

Synthesis of poly(lactic acid)‐based polyurethanes

Poly(lactic acid) (PLA) is a biodegradable aliphatic polyester, but its brittleness makes it unsuitable for many packaging and appliance applications. The goal of the work reported was to create novel poly(ester urethane)s that incorporate biodegradable poly(lactic acid) diols (PLA‐OHs) and good mechanical properties of increased molecular weight via crosslinked network formation for engineering plastics applications. Three kinds of polyols (PLA‐OHs, PLA‐OHs/poly(tetramethylene ether) glycol or PLA‐OHs/poly(butylene adipate) glycol (PBA)) and two kinds of diisocyanates (4,4‐diphenylmethane diisocyanate (MDI) or toluene 2,4‐diisocyanate (TDI)) were chosen for the soft and hard segments to compare their mechanical properties. In addition, 1,4‐butanediol and trimethylolpropane were each used as chain extender agents. Results showed the PLA/PBA‐polyurethanes (PLA/PBA‐PUs) of the MDI series and the PLA/PBA‐PUs of the TDI series had improved thermal stability and enhanced mechanical properties. Degradation behavior showed the PLA‐based polyurethanes could be degraded in phosphate‐buffered saline solution and enzyme solution. © 2012 Society of Chemical Industry     

Part 7. Effects of poly(L‐lactide‐co‐ϵ‐caprolactone) on morphology,structure, crystallization,and physical properties of blends of poly(L‐lactide) and poly(ϵ‐caprolactone)

Blended films of poly(L ‐lactide) [ie poly(L ‐lactic acid)] (PLLA) and poly(?‐caprolactone) (PCL) without or mixed with 10 wt% poly(L ‐lactide‐co‐?‐caprolactone) (PLLA‐CL) were prepared by solution‐casting. The effects of PLLA‐CL on the morphology, phase structure, crystallization, and mechanical properties of films have been investigated using polarization optical microscopy, scanning electron microscopy, differential scanning calorimetry and tensile testing. Addition of PLLA‐CL decreased number densities of spherulites in PLLA and PCL films, and improved the observability of spherulites and the smoothness of cross‐section of the PLLA/PCL blend film. The melting temperatures (T_m) of PLLA and PCL in the films remained unchanged upon addition of PLLA‐CL, while the crystallinities of PLLA and PCL increased at PLLA contents [X_PLLA = weight of PLLA/(weight of PLLA and PCL)] of 0.4–0.7 and at most of the X_PLLA values, respectively. The addition of PLLA‐CL improved the tensile strength and the Young modulus of the films at X_PLLA of 0.5–0.8 and of 0–0.1 and 0.5–0.8, respectively, and the elongation at break of the films at all the X_PLLA values. These findings strongly suggest that PLLA‐CL was miscible with PLLA and PCL, and that the dissolved PLLA‐CL in PLLA‐rich and PCL‐rich phases increased the compatibility between these two phases. © 2003 Society of Chemical Industry     

Stereocomplexed polylactides (Neo‐PLA) as high‐performance bio‐based polymers: their formation,properties, and application

Polymeric materials prepared from renewable natural resources are now being accepted as “bio‐based polymers”, because they are superior to the conventional petroleum‐based polymers in reducing the emission of carbon dioxide. Among them, poly(L ‐lactide) (PLLA) prepared by fermentation and polymerization is paid an immediate attention. Although PLLA exhibits a broad range of physico‐chemical properties, its thermal and mechanical properties are somewhat poorer for use as ordinary structural materials. For improving these inferior properties, a stereocomplex form consisting of PLLA and its enantiomer poly(D ‐lactide) (PDLA) has high potential because of showing high melting nature (230 °C). It can be formed by simple polymer blend of PLLA and PDLA or more easily with stereoblock polylactides (sb‐PLA) which are PLLA/PDLA block copolymers. These novel PLA polymers, named “Neo‐PLA”, can provide a wide range of properties that have never be attained with single PLLA. Neo‐PLA retains sustainability or bio‐based nature, because both monomers L ‐ and D ‐lactic acids are manufactured from starch by fermentation. Copyright © 2006 Society of Chemical Industry     

Effects of thermal imidization on mechanical properties of poly(amide‐co‐imide)/multiwalled carbon nanotube composite films

In this study, experimental and numerical studies were performed to investigate the relationship among the functionalization method, weight fraction of MWCNTs, thermal imidization cycle, and mechanical properties of various PAI/MWCNT composite films. Poly(amide‐co‐imide)/multiwalled carbon nanotube composite films were prepared by solution mixing and film casting. The effects of chemical functionalization and weight fraction of multiwalled carbon nanotubes on thermal imidization and mechanical properties were investigated through experimental and numerical studies. The time needed to achieve sufficient thermal imidization was reduced with increasing multiwalled carbon nanotube content when compared with that of a pure poly(amide‐co‐imide) film because multiwalled carbon nanotubes have a higher thermal conductivity than pure poly(amide‐co‐imide) resin. Mechanical properties of pure poly(amide‐co‐imide) and poly(amide‐co‐imide)/multiwalled carbon nanotube composite films were increased with increasing imidization time and were improved significantly in the case of the composite film filled with hydrogen peroxide treated multiwalled carbon nanotubes. Both the tensile strength and strain to failure of the multiwalled carbon nanotube filled poly(amide‐co‐imide) film were increased substantially because multiwalled carbon nanotube dispersion was improved and covalent bonding was formed between multiwalled carbon nanotubes and poly(amide‐co‐imide) molecules. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Poly(lactic acid)/titanium dioxide nanocomposite films: Influence of processing procedure on dispersion of titanium dioxide and photocatalytic activity

Poly(lactic acid)/titanium dioxide (TiO₂) composite films were prepared by direct melt processing using three different procedures (i.e., compression molding, twin‐screw melt extrusion, and melt extrusion and thermoforming). The effect of TiO₂ loading and processing procedures on the phase morphology and on the thermal, mechanical, and barrier properties of the obtained nanocomposites were analyzed respectively by field‐emission scanning electron microscopy‐energy dispersive spectrometry, differential scanning calorimetry, universal testing machine, and water vapor and oxygen permeability measurements. The incorporation of TiO₂ nanoparticles into the poly(lactic acid) matrix increased the crystallinity and improved the barrier properties of the composites. The maximum tensile strength was achieved at the 2% content of TiO₂ for the films produced by compression molding and twin‐screw melt extrusion, whereas the tensile strength for films produced by melt extrusion and thermoforming decreases markedly with an increasing TiO₂ content. The photocatalytic activities of the obtained nanocomposites were investigated by analyzing the degradation of methyl orange. Results confirmed that the processing procedures and the distribution of TiO₂ in the polymer matrix are the key parameters, which rule the photocatalytic behavior of composite films. POLYM. COMPOS., 2011. © 2011 Society of Plastics Engineers     

Effect of chlorine dioxide gas on physical,thermal, mechanical,and barrier properties of polymeric packaging materials

The effects of gaseous chlorine dioxide (ClO₂) on properties and performance of 10 selected polymeric packaging materials, including polyethylene (PE), biaxially oriented poly(propylene), polystyrene, poly(vinyl chloride), poly(ethylene terephthalate) (PET), poly(lactic acid), nylon, and a multilayer structure of ethylene vinyl acetate (EVA)/ethylene vinyl alcohol (EVOH), were evaluated. Physical, mechanical, barrier, and color properties as well as infrared (IR) spectra were assessed before and after polymer samples were exposed to 3600 ppmV ClO₂ gas at 23°C for 24, 168, and 336 h. The IR spectra of the ClO₂‐treated samples revealed many changes in their chemical characteristics, such as the formation of polar groups in the polyolefin, changes in functional groups, main chain scission degradation, and possible chlorination of several materials. The ClO₂‐treated PE samples showed a decrease in tensile properties compared with the untreated (control) films. Decreases in moisture, oxygen, and/or carbon dioxide barrier properties were observed in the treated PE, PET, and multilayer EVA/EVOH/EVA samples. A significant increase (P < 0.05) in the barrier to O₂ was observed in the ClO₂‐treated nylon, possibly the result of molecular reordering, which was found through an increase in the crystallinity of the material. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Antioxidant and prooxidant effects of α‐tocopherol in a linoleic acid‐copper(II)‐ascorbate system

The peroxidation of linoleic acid (LA) in the absence and presence of either Cu(II) ions alone or Cu(II)‐ascorbate combination was investigated in aerated and incubated emulsions at 37°C and pH 7. LA peroxidation induced by either copper(II) or copper(II)‐ascorbic acid system followed pseudo‐first order kinetics with respect to primary (hydroperoxides) and secondary (aldehydes‐ and ketones‐like) oxidation products, detected by ferric‐thiocyanate and TBARS tests, respectively. α‐Tocopherol showed both antioxidant and prooxidant effects depending on concentration and also on the simultaneous presence of Cu(II) and ascorbate. Copper(II)‐ascorbate combinations generally led to distinct antioxidant behavior at low concentrations of α‐tocopherol and slight prooxidant behavior at high concentrations of α‐tocopherol, probably associated with the recycling of tocopherol by ascorbate through reaction with tocopheroxyl radical, while the scavenging effect of α‐tocopherol on lipid peroxidation was maintained as long as ascorbate was present. On the other hand, in Cu(II) solutions without ascorbate, the antioxidant behavior of tocopherol required higher concentrations of this compound because there was no ascorbate to regenerate it. Practical applications: Linoleic acid (LA) peroxidation induced by either copper(II) or copper(II)‐ascorbic acid system followed pseudo‐first order kinetics with respect to primary (hydroperoxides) and secondary (e.g., aldehydes and ketones) oxidation products. α‐Tocopherol showed both antioxidant and prooxidant effects depending on concentration and also on the simultaneous presence of Cu(II) and ascorbate. The findings of this study are believed to be useful to better understand the actual role of α‐tocopherol in the preservation of heterogenous food samples such as lipid emulsions. Since α‐tocopherol (vitamin E) is considered to be physiologically the most important lipid‐soluble chain‐breaking antioxidant of human cell membranes, the results can be extended to in vivo protection of lipid oxidation.     

Mechanical and electrical multifunctional poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate)—multiwall carbon nanotube nanocomposites

In this work, nanocomposites of poly(hydroxybutyrate‐co‐hydroxyvalerate) PHBV and multiwalled carbon nanotubes (MWNT) were prepared by melt blending. Mechanical, thermal, morphological, and electrical properties of the prepared PHBV/MWNT nanocomposites were investigated. Differential scanning calorimetry (DSC) and X‐ray diffraction (XRD) results showed MWNT effectively enhanced the crystallization and nucleation of PHBV. Dynamic thermo‐mechanical and static uniaxial mechanical tensile and compressive properties were increased by the addition of MWNT. MWNT observed in the nanocomposites using transmission electron microscopy (TEM) showed dimensions similar to separated nanotubes inferring a good dispersion. The presence of nanotubes in close vicinity with each other formed an interconnecting network that led to the formation of electrically conductive nanocomposites. The electrical resistance of the nanocomposites was reduced with the addition of MWNT. POLYM. ENG. SCI., 2012. © 2012 Society of Plastics Engineers     

Polyaniline − carbon nanohorn composites as thermoelectric materials

Thermoelectric materials can convert heat into electricity when a temperature gradient is present. The investigation of conductive polymers such as polyaniline (PANI ) and poly(3,4‐ethylenedioxythiophene) as active materials for thermoelectric generators in the room temperature range is gaining interest because of several key advantages offered by these materials. The relative ease of solution processing, their mechanical stability and flexibility together with low density and low thermal conductivity make conductive polymers suitable for integration in a thermoelectric generator. Polymers offer remarkably low thermal conductivity values but modest Seebeck coefficient and electrical conductivity. In this work, polymer/inorganic nanocomposites of PANI with carbon particles such as single wall carbon nanohorns (SWCNHs ) were prepared via solution mixing of the precursors in order to increase the electrical conductivity by means of polymer matrix/nanohorn electronic junctions. The electrical conductivity and Seebeck coefficient were estimated on PANI /SWCNH films and pressed pellets and through‐plane thermal conductivity was determined on films. The thermal stability of PANI /SWCNH composites was evaluated by means of TGA /DSC coupled with residual gas analysis. It was found that a proper concentration of SWCNHs in PANI ?(+/?)‐camphor‐10‐sulfonic acid (CSA) film was effective in increasing the electrical conductivity without decreasing the Seebeck coefficient. © 2017 Society of Chemical Industry     

Influence of silanized low‐dimensional carbon nanofillers on mechanical,thermomechanical, and crystallization behaviors of poly(L‐lactic acid) composites—A comparative study

Composites were investigated regarding the comparison of multi‐walled carbon nanotubes (MWCNTs) with exfoliated graphene(EG) in poly(L‐lactic acid) (PLLA) and the effect of silane‐treated carbon nanofillers on properties of PLLA composites. Solution blending method was used to prepare PLLA composites at a filler content of 0.5 wt %. Fourier transform infrared spectroscopy and X‐ray photoelectron spectra results indicated the attachment of silane molecules on the surface of these nanofillers. It was found that the addition of these nanofillers greatly enhanced the mechanical, thermomechanical, and crystallization behaviors of PLLA due to the heterogeneous nucleation effect. Moreover, the silane‐treated fillers further enhanced the breaking elongation moderately (although the materials are still brittle), modulus and thermal property of the nanocomposites, without sacrificing the tensile strength, compared with the pristine nanocomposites. On the other hand, composites reinforced with MWCNTs and EG perform almost the same mechanical property. And EG outperformed MWCNTs in thermomechanical properties of composites when being used as the reinforcement of PLLA. Conversely, composites reinforced with MWCNTs showed better crystallization properties than those reinforced with EG. Interestingly, no significant changes were observed for the crystallization properties of PLLA composites when MWCNTs and EG had been treated by silane coupling agent. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 130: 1194‐1202, 2013