Effects of poly(vinyl acetate) and poly(vinyl chloride‐co‐vinyl acetate) low‐profile additives on properties of cured unsaturated polyester resins. II. glass‐transition temperatures and mechanical properties

Three series of self‐synthesized poly(vinyl acetate)‐based low‐profile additives (LPAs), including poly(vinyl acetate), poly(vinyl chloride‐co‐vinyl acetate), and poly(vinyl chloride‐co‐vinyl acetate‐co‐maleic anhydride), with different chemical structures and molecular weights were studied. Their effects on the glass‐transition temperatures and mechanical properties for thermoset polymer blends made from styrene, unsaturated polyester, and LPAs were investigated by an integrated approach of the static phase characteristics, cured sample morphology, reaction kinetics, and property measurements. Based on Takayanagi mechanical models, the factors that control the glass‐transition temperature in each phase region of the cured samples and the mechanical properties are discussed. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 3347–3357, 2003     

Synthesis and characterization of biodegradable block copolymers of poly(propylene fumarate‐co‐sebacate)‐co‐poly(ethylene glycol) and poly(ethylene fumarate‐co‐sebacate)‐co‐poly(ethylene glycol)

The synthesis of two low molecular weight linear unsaturated oligoester precursors, poly(propylene fumarate‐co‐sebacate) (PPFS) and poly(ethylene fumarate‐co‐sebacate) (PEFS), are described. PPFS, PEFS, and poly(ethylene glycol) are then used to prepare poly(propylene fumarate‐co‐sebacate)‐co‐poly(ethylene glycol) (PPFS‐co‐PEG) and poly(ethylene fumarate‐co‐sebacate)‐co‐poly(ethylene glycol) (PEFS‐co‐PEG) block copolymers. The products thus obtained are investigated in terms of the molecular weight, composition, structure, thermal properties, and solubility behavior. A number of design parameters including the molecular weights of PPFS, PEFS, and PEG, the reaction time in the polymer synthesis, and the weight ratio of PEG to PPFS or to PEFS are varied to assess their effects on the product yield and properties. The hydrolytic degradation of PPFS‐co‐PEG and PEFS‐co‐PEG in an isotonic buffer (pH 7.4, 37°C) is investigated, and it is found that the fumarate ester bond cleaves faster than does the sebacate ester bond. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 295–300, 2004     

Effects of poly(methyl methacrylate)‐based low‐profile additives on the properties of cured unsaturated polyester resins. I. Miscibility,curing behavior,and glass‐transition temperatures

The effects of three series of self‐synthesized poly(methyl methacrylate) (PMMA)‐based low‐profile additives (LPAs), including PMMA, poly(methyl methacrylate‐co‐butyl acrylate), and poly(methyl methacrylate‐co‐butyl acrylate‐co‐maleic anhydride), with different chemical structures and MWs on the miscibility, cured‐sample morphology, curing kinetics, and glass‐transition temperatures for styrene (ST)/unsaturated polyester (UP) resin/LPA ternary systems were investigated by group contribution methods, scanning electron microscopy, differential scanning calorimetry (DSC), and dynamic mechanical analysis, respectively. Before curing at room temperature, the degree of phase separation for the ST/UP/LPA systems was generally explainable by the calculated polarity difference per unit volume between the UP resin and LPA. During curing at 110°C, the compatibility of the ST/UP/LPA systems, as revealed by cured‐sample morphology, was judged from the relative magnitude of the DSC peak reaction rate and the broadness of the peak. On the basis of Takayanagi's mechanical models, the effects of LPA on the final cure conversion and the glass‐transition temperature in the major continuous phase of ST‐crosslinked polyester for the ST/UP/LPA systems was also examined. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 91: 3369–3387, 2004     

Polyhydroxybutyrate/acrylonitrile‐g‐(ethylene‐co‐ propylene‐co‐diene)‐g‐styrene blends: Their morphology and thermal and mechanical behavior

Polyhydroxybutyrate (PHB) is a biodegradable bacterial polyester emerging as a viable substitute for synthetic, semicrystalline, nonbiodegradable polymers. An elastomer terpolymer of acrylonitrile‐g‐(ethylene‐co‐propylene‐co‐diene)‐g‐styrene (AES) was blended with PHB in a batch mixer and in a twin‐screw extruder to improve the mechanical properties of PHB. The blends were characterized with differential scanning calorimetry, dynamic mechanical analysis, scanning electron microscopy, and impact resistance measurements. Despite the narrow processing window of PHB, blends with AES could be prepared via the melting of the mixture without significant degradation of PHB. The blends were immiscible and composed of four phases: poly(ethylene‐co‐propylene‐co‐diene), poly(styrene‐co‐acrylonitrile), amorphous PHB, and crystalline PHB. The crystallization of PHB in the blends was influenced by the AES content in different ways, depending on the processing conditions. A blend containing 30 wt % AES presented impact resistance comparable to that of high‐impact polystyrene, and the value was about 190% higher than that of pure PHB. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Aliphatic–aromatic poly(butylene carbonate‐co‐terephthalate) random copolymers: Synthesis,cocrystallization, and composition‐dependent properties

A series of aliphatic–aromatic poly(carbonate‐co‐ester)s poly(butylene carbonate‐co‐terephthalate)s (PBCTs), with weight‐average molecular weight of 113,000 to 146,000 g/mol, were synthesized from dimethyl carbonate, dimethyl terephthalate, and 1,4‐butanediol via a two‐step polycondensation process using tetrabutyl titanate as the catalyst. The PBCTs, being statistically random copolymers, show a single T_g over the entire composition range. The thermal stability of PBCTs strongly depends on the molar composition. Melting temperatures vary from 113 to 213°C for copolymers with butylene terephthalate (BT) unit content higher than 40 mol %. The copolymers have a eutectic melting point when about 10 mol % BT units are included. Crystal lattice structure shifts from the poly(butylene carbonate) to the poly(butylene terephthalate) type crystal phase with increasing BT unit content. DSC and WAXD results indicate that the PBCT copolymers show isodimorphic cocrystallization. The tensile modulus and strength decrease first and then increase according to copolymer composition. The enzymatic degradation of the PBCT copolymers was also studied. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41952.     

Biodegradable polymer made of styrene and N‐benzyl‐4‐vinylpyridinium chloride

A copolymer of styrene with N‐benzyl‐4‐vinylpyridinium chloride (BVP), poly(styrene‐co‐N‐benzyl‐4‐vinylpyridinium chloride) (PST‐co‐BVP), was degradable by activated sludge in soil when the oligo‐styrene portion was sufficiently small. The degradation of the equimolar copolymer followed first‐order kinetics when the polymer sample was 1.0 or 0.5 g/kg and gave a half‐life of 5.6 days. The degradation of PST‐co‐BVP with a reduced BVP content did not follow first‐order kinetics under the aforementioned conditions but appeared to follow the kinetics when the amount of the polymer sample was sufficiently small. Under the ultimate conditions, the half‐life of PST‐co‐BVP that contained 10.6 mol % BVP was estimated to be 12.5 days, and the half‐life of PST‐co‐BVP that contained 5 mol % BVP was expected to be 30–40 days. The incorporation of 5 mol % BVP appeared sufficient for making PST‐co‐BVP substantially biodegradable if we did not expect exceptionally rapid degradation. PST‐co‐BVP was different from conventional polystyrene but possessed biodegradability. Random scission of the main chain much predominated over uniform scission from the end of the polymer chain in the biodegradation of PST‐co‐BVP. The cleavage of the main chain at BVP appeared predominant over that of oligo‐styrene. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 554–559. 2006     

Influence of an oligomer polyol and monomers on the structure and properties of core–shell polyurethane–poly(n‐butyl acrylate‐co‐styrene) hybrid emulsions

The free‐radical polymerization of alkenyl‐terminated polyurethane dispersions with styrene and n‐butyl acrylate was performed to obtain a series of stable polyurethane–poly(n‐butyl acrylate‐co‐styrene) (PUA) hybrid emulsions. The core–shell structure of the emulsions was observed by transmission electron microscopy, and the microstructure was studied by ¹H‐NMR and Fourier transform infrared spectroscopy. The effects of the poly(propylene glycol)s (number‐average molecular weights = 1000, 1500, and 2000 Da) and the mass ratios of polyurethane to poly(n‐butyl acrylate‐co‐styrene) (PBS; 50/50, 40/60, 30/70, 20/80, and 10/90) on the structure, morphology, and properties of the PUAs were investigated. The average particle size and water absorption values of the PUAs increased with increasing of PBS content. However, the surface tension decreased from 34.61 to 30.29 mN/m. PUA‐2, with a bimodal distribution, showed Newtonian liquid behaviors, and PUA‐3 showed a great thermal stability, fast drying characteristics, and excellent adhesion to packaging films. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43763.     

Peroxide modification of poly(butylene adipate‐co‐succinate)

We attempted to introduce crosslinking into poly(butylene adipate‐co‐succinate) (PBAS) to improve the properties, such as the mechanical strength and elasticity, by a simple addition of dicumyl peroxide (DCP). Prior to curing, the thermal stability of PBAS was investigated. Above 170°C PBAS was severely degraded, and the degradation could not be successfully stabilized by an antioxidant. The PBAS was effectively crosslinked by DCP, and the gel fraction increased as the DCP content increased. A major structure of the crosslinked PBAS was an ester and aliphatic group. The tensile strength and elongation of PBAS were improved with an increasing content of DCP, but there was little affect on the tear strength. The biodegradability of crosslinked PBAS was not seriously deteriorated. A higher degree of crosslinking gave a lower heat of crystallization and heat of fusion. However, the melt crystallization temperatures of the crosslinked PBAS were higher than that of PBAS. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 81: 637–645, 2001     

Effects of poly(vinyl acetate) and poly(vinyl chloride‐ co‐vinyl acetate) low‐profile additives on properties of cured unsaturated polyester resins. I. Volume shrinkage characteristics and internal pigmentability

Three series of self‐synthesized poly(vinyl acetate)‐based low‐profile additives (LPAs) with different chemical structures and molecular weights, including poly(vinyl acetate), poly(vinyl chloride‐co‐vinyl acetate), and poly(vinyl chloride‐co‐vinyl acetate‐co‐maleic anhydride), were studied. Their effects on the volume shrinkage characteristics and internal pigmentability for low‐shrink unsaturated polyester (UP) resins during cure were investigated. The experimental results were examined with an integrated approach involving measurements of the static phase characteristics of the ternary styrene/UP/LPA system, the reaction kinetics, the cured sample morphology, and microvoid formation by using differential scanning calorimetry, scanning electron microscopy, optical microscopy, and image analysis. Based on the Takayanagi mechanical model, factors leading to both good volume shrinkage control and acceptable internal pigmentability for the molded parts were explored. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 3336–3346, 2003     

Unsaturated 2‐oxazoline end capping of liquid crystalline polyester by reactive processing and in a solution

End capping of liquid crystalline poly(ethylene terephthalate‐co‐oxybenzoate) with a bifunctional 2‐oxazoline derivative, 2‐(4‐allyloxyphenyl)‐2‐oxazoline, has been performed in melt under the condition of reactive processing and in a solution. The reaction in melt is very fast and, despite some modifier evaporation, it is completed in 2 min at 230°C. The product is a polyester containing unsaturated end groups bonded via esteramide linkage. The presence of unsaturation was proved by ¹³C‐NMR spectroscopy. An increase in temperature and prolongation of the processing time gives raise to thermal‐induced reactions on the unsaturated end groups, resulting in an increase of the glass transition temperature. Depending on the processing temperature decomposition, propagation and crosslinking occur in different extent and influence polymer properties. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 72: 1047–1053, 1999     

Preparation and characterization of photoreactive copolymers containing curable pendants for positive photoresist

tert‐Butyl methacrylate (TBMA) was copolymerized with various comonomers that were selected from methyl methacrylate (MMA), n‐butyl acrylate (NBA), acrylic acid (AA), and 2‐hydroxyethyl methacrylate (HEMA). From film physical properties, poly(TBMA‐co‐HEMA) and poly(TBMA‐co‐AA‐co‐NBA), were selected as resin binders. To introduce unsaturated double bonds onto the side chain of copolymers, they were further functionalized with acryloyl chloride and glycidyl methacrylate. Copolymers synthesized in this investigation were all identified by using FTIR and NMR. The thermal decomposition temperature of functionalized poly(TBMA‐co‐HEMA) showed obvious difference before and after crosslinking. Adding a small amount of EGDMA as the crosslinking agent could increase the degree of crosslinking and obviously improve the physical properties. Functionalized poly(TBMA‐co‐HEMA) was used as a binder resin and composed with a photoacid generator for positive photoresists. From exposure characteristics, the optimal lithographic condition was achieved when exposed for 90 s, PEB at 100°C for 2.5 min, and developed in 10 wt % Na₂CO₃ developer for 30 s. After completing the lithography process, the residual pattern of positive photoresist was further treated at 140°C for 30 min to cure the pendant unsaturated groups. The resolution of the positive photoresist was analyzed by an optical microscope and SEM technique. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 80: 328–333, 2001     

Ring-opening homopolymerization and copolymerization of lactones. Part 2. enzymatic degradability of poly(β-hydroxybutyrate) stereoisomers and copolymers of β-butyrolactone with ε-caprolactone and δ-valerolactone

In this study, we have prepared poly([R,S ]-β-hydroxybutyrate) (P([R,S ]-β-HB) or PHB) from [R ,S]-β-butyrolactone ([ R,S]-β-BL), using different aluminoxane catalyst systems (triethylaluminium/water, triisobutylaluminium/water, trioctylaluminium/water and tetraisobutyldialuminoxane/water). By varying the ratio of catalyst to water and using a method of fractionation of polymers, PHB with different isotactic diad fractions (i) (from 0.41 to 0.72) and crystallinities were obtained. Copolymers poly(butyrolactone-co-caprolactone) (P(BL-co-CL)) and poly(butyrolactone-co-valerolactone) (P(BL-co-VL)) have also been synthesized from the ring-opening copolymerization of [ R,S]-β-BL with either ε-caprolactone (CL) or δ-valerolactone (VL) using tetraisobutyldialuminoxane (TIBAO) catalyst. The enzymatic degradability of these polymers was studied in aerobic and anaerobic media. The objective of this work was to determine the influence of the tacticity and crystallinity of the polymers on their degree of biodegradation and on their initial degradation rate. It was shown that the degradation rate measured for bacterial PHB 100% [R] was the highest and the degree of aerobic biodegradation reached after 36 days was around 94%. A 40–50% biodegradation was obtained for synthetic PHB, highly isotactic and predominantly syndiotactic. The non-crystalline and atactic PHB synthesized from TIBAO catalyst had a very high degree of biodegradation of around 88%. This result may suggest that not only are the [R ]-BL units hydrolysed but also the [S ]-BL units. The influence of the crystallinity on the initial degradation rate was observed for the copolymers P(BL-co-CL) and P(BL-co -VL) of various feed ratios. All these copolymers synthesized from TIBAO catalyst, exhibit a high degree of biodegradation of around 85% except for copolymers containing a very high portion of unsubstituted units, CL or VL. The anaerobic biodegradation of PHB and copolymers P(BL-co -CL) is much lower than the aerobic biodegradation, as are the initial rates, even for bacterial P([R ]-HB). © 1999 Society of Chemical Industry     

Syntheses and properties of the PET‐co‐PEA copolyester

An aliphatic‐aromatic random‐block copolyester of poly(ethylene terephthalate) (PET), and poly(enthylene adipate) (PEA), PET‐co‐PEA, was synthesized via melt polycondensation. The chemical structure of the products were characterized by two kinds of spectroscopic techniques (Fourier transform infrared and ¹H‐NMR). The thermal properties of the copolyester were characterized by thermogravimetry analysis, differential scanning calorimetry, wide‐angle X‐ray diffraction, and polarized optical microscopy. It was found that the crystallization ability, melting point, glass transition temperature of the random‐block coplyester decreased apparently. Meanwhile, the tensile strength and hydrolysis performance were measured as well. The result showed that the random‐block copolyesters PET‐co‐PEA displayed excellent properties in elasticity and strength. In addition, the potential degradability was found in hydrolysis measurement. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 44967.     

Chemical structure of poly(β‐cyclodextrin‐co‐citric acid)

We synthesized water‐insoluble polymers, poly(β‐cyclodextrin‐co‐citric acid)s, by heating a mixture of citric acid, cyclodextrin (CD), and Na₂HPO₄ as a catalyst with a 6 : 1 : 2 molar ratio at 160, 170, and 180°C for 10 and 20 min. The chemical composition of the polyesters was determined by high pressure liquid chromatography (HPLC) analysis of the polymer hydrolysates. The crosslinking mechanisms and thermal degradation of the polymers were also investigated. The polyesters contained 30–35% citric acid, 1–4% unsaturated carboxylic acids (i.e., itaconic, cis‐aconitic, trans‐aconitic, and mesaconic acids), and 60–70% CD, whereas about 40% of them were able to form inclusion complexes. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Synthesis and photo‐ and biodegradabilities of poly[(hydroxybutyrate‐co‐hydroxyvalerate)‐ g‐phenyl vinyl ketone]

The graft copolymer, poly[(hydroxybutyrate‐co‐hydroxyvalerate)‐g‐phenyl vinyl ketone] [P(HBV‐g‐PVK)], was synthesized by graft polymerization of phenyl vinyl ketone (PVK) onto poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate) (PHBV) under nitrogen atmosphere using benzoyl peroxide. The structure of P(HBV‐g‐PVK) was identified by Fourier transform IR and ¹H‐NMR spectra. The effects of weight ratio of PVK to PHBV in feed, initiator concentration, reaction time, and reaction temperature on the grafting ratio and grafting efficiency were investigated. The thermal decomposition temperature of P(HBV‐g‐PVK) was 272°C. The tensile strengths of P(HBV‐g‐PVK) after photo‐ or biodegradation were significantly decreased due to degradation by UV irradiation or Aspergillus niger. The value of color difference (ΔE) of P(HBV‐g‐PVK) was greater than that of PHBV. The film surfaces of P(HBV‐g‐PVK) treated with UV irradiation and Aspergillus niger showed many pits as compared with the untreated P(HBV‐g‐PVK). It has been found that the photo‐ and biodegradabilities of P(HBV‐g‐PVK) was excellent. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 74: 1432–1439, 1999     

Polymer nanocomposites containing carbon nanotubes and miscible polymer blends based on poly[ethylene‐co‐(acrylic acid)]

Four binary polymer blends containing poly [ethylene‐co‐(acrylic acid)] (PEAA) as one component, and poly(4‐vinyl phenol‐co‐2‐hydroxy ethyl methacrylate) (P4VPh‐co‐2HEMA) or poly(2‐ethyl‐2‐oxazoline) (PEOx) or poly(vinyl acetate‐co‐vinyl alcohol) (PVAc‐co‐VA) or poly (vinylpyrrolidone‐co‐vinyl acetate) (PVP‐co‐VAc) as the other component were prepared and used as a matrix of a series of composite materials. These binary mixtures were either partially or completely miscible within the composition range studied and were characterized by differential scanning calorimetry (DSC) and Fourier transformed infrared spectroscopy (FTIR). Carbon nanotubes (CNTs) were prepared by a thermal treatment of polyester synthesized through the chemical reaction between ethylene glycol and citric acid over an alumina boat. High resolution transmission electron microscopy (HRTEM) was used to characterize the synthesized CNTs. Films of composite materials containing CNTs were obtained after evaporation of the solvent used to prepare solutions of the four types of binary polymer blends. Young's moduli of the composites were obtained by thermomechanical analysis at room temperature. Only one glass transition temperature was detected for several compositions on both binary blends and the composite material matrices. Evidence of hydrogen bond formation was recorded for both miscible blends and composite materials. The degree of crystallinity and Young's moduli of the CNT‐polymer composites increased compared to the single polymer blends. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci 2008     

Synthesis, 1H‐NMR characterization,and biodegradation behavior of aliphatic–aromatic random copolyester

Aliphatic‐aromatic copolyesters of poly(butylene adipate‐co‐butylene terephthalate) have been synthesized by polycondensation. Molecular weights and thermal properties have been measured. The four samples of copolyesters, with aromatic contents, varying from 40 to 60 mol %, were investigated by ¹H‐NMR spectroscopy to determine copolymers composition and microstructure. For all samples, the biodegradation experiment was carried out in compost, to study copolyesters degradation behavior. Using ¹H‐NMR, we noticed that the average sequence length and content of the aliphatic unit decrease and those of the aromatic unit increase. The molecular weights of the samples distinctly drop after composting. In all degraded samples, the trace of growing microorganisms was found on their surfaces by scanning electron microscopy. In combination with the results, the degradation behavior has been studied in the middle stage of copolyester degradation. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 104: 2643–2649, 2007     

Preparation and characterization of biodegradable poly(3‐hydroxybutyrate‐co‐4‐hydroxybutyrate)/silica nanocomposites

Biodegradable poly(3‐hydroxybutyrate‐co‐4‐hydroxybutyrate) [P(3HB‐co‐4HB)]/silica nanocomposites were prepared by melt compounding. The effects of silica on the morphology, crystallization, thermal stability, mechanical properties, and biodegradability of P(3HB‐co‐4HB) were investigated. The nanoparticles showed a fine and homogeneous dispersion in the P(3HB‐co‐4HB) matrix for silica contents below 5 wt%, whereas some aggregates were detected with further increasing silica content. The addition of silica enhanced the crystallization of P(3HB‐co‐4HB) in the nanocomposites due to the heterogeneous nucleation effect of silica. However, the crystal structure of P(3HB‐co‐4HB) was not modified in the presence of silica. The thermal stability of P(3HB‐co‐4HB) was enhanced by the incorporation of silica. Silica was an effective reinforcing agent for P(3HB‐co‐4HB), and the modulus and tensile strength of the nanocomposites increased, whereas the elongation at break decreased with increasing silica loading. The exciting aspect of this work was that the rate of enzymatic degradation of P(3HB‐co‐4HB) was enhanced significantly after nanocomposites preparation. POLYM. ENG. SCI., 2012. © 2011 Society of Plastics Engineers     

Biodegradable composites: Morphological,chemical, thermal,and mechanical properties of composites of poly(hydroxybutyrate‐co‐hydroxyvalerate) with curaua fibers after exposure to simulated soil

Composites produced from biodegradable polymeric matrixes reinforced with vegetable fibers have attractive mechanical properties and are environmentally friendly. This work is directed to the biodegradation of a composite made of a poly(hydroxybutyrate‐co‐hydroxyvalerate) matrix reinforced with curaua fibers (with and without alkaline treatment) in simulated soil. The composites were developed by extrusion and injection and were later buried in simulated soil according to the ASTM G160‐03 method. Scanning electron microscopy showed evidence of microbial attack on the samples surfaces. Infrared spectra showed that the composites biodegradation was mainly caused by erosion of the surface layer resulting from microorganisms activity. Thermogravimetric analysis pointed out reduced thermal stability of the samples, and results of differential scanning calorimetry showed that the degree of crystallinity increases and then decreases progressively throughout the degradation period, indicating that enzymatic degradation primarily occurs in the amorphous phase material and thereafter in the crystalline phase. For curaua composite fibers, reductions in tensile strength and elastic modulus are more significant, indicating that the presence of fibers promotes biodegradation of the curaua fiber. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40712.     

Biodegradation of starch and acrylic‐grafted starch by Aspergillus niger

The biodegradation of starch and grafted starch by Aspergillus niger was examined. The grafted polymers were poly(methyl methacrylate) (PMMA) and poly(butyl acrylate) (PBA). Thermogravimetric analysis, Fourier transform infrared, and scanning electron microscopy were used to determine the morphology and degradation degree of each material. The temperature of maximum decomposition for starch decreased as enzymatic degradation proceeded, and it was completed on the 8th day of culturing in a liquid medium. Grafted samples with PMMA and PBA achieved degradation of their starch moiety. PBA in starch‐g‐PBA samples hindered the accessibility of the enzymes to the degradable material, and this resulted in a longer degradation time. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 2764–2770, 2003