Quasi sliding mode‐based single input fuzzy self‐tuning decoupled fuzzy PI control for robot manipulators with uncertainty

This paper presents a robust adaptive control strategy for robot manipulators, based on the coupling of the fuzzy logic control with the so‐called sliding mode control (SMC) approach. The motivation for using SMC in robotics mainly relies on its appreciable features. However, the drawbacks of the conventional SMC, such as chattering effect and required a priori knowledge of the bounds of uncertainties can be destructive. In this paper, these problems are suitably circumvented by adopting a reduced rule base single input fuzzy self tuning decoupled fuzzy proportional integral sliding mode control approach. In this new approach a decoupled fuzzy proportional integral control is used and a reduced rule base single input fuzzy self‐tuning controller as a supervisory fuzzy system is added to adaptively tune the output control gain of the decoupled fuzzy proportional integral control. Moreover, it is proved that the fuzzy control surface of the single‐input fuzzy rule base is very close to the input/output relation of a straight line. Therefore, a varying output gain decoupled fuzzy proportional integral sliding mode control approach using an approximate line equation is then proposed. The stability of the system is guaranteed in the sense of the Lyapunov theorem. Simulations using the dynamic model of a 3DOF planar manipulator with uncertainties show the effectiveness of the approach in high speed trajectory tracking problems. The simulation results that are compared with the results of conventional SMC indicate that the control performance of the robot system is satisfactory and the proposed approach can achieve favorable tracking performance, and it is robust with regard to uncertainties and disturbances. Copyright © 2011 John Wiley & Sons, Ltd.     

机器人操作器的自适应模糊滑模控制器设计

针对机器人动力学系统提出了一种基于模糊逻辑的自适应模糊滑模控制方案.根据滑模控制原理并利用模糊系统的逼近能力设计控制器,基于李雅谱诺夫方法设计自适应律,证明了闭环模糊控制系统的稳定性和跟踪误差的收敛性.控制结构简单,不需要复杂的运算.该设计方案柔化了控制信号,减轻了一般滑模控制的抖振现象.仿真结果表明了所提控制策略的有效性.     

Identification Recurrent Type 2 Fuzzy Wavelet Neural Network and L2‐Gain Adaptive Variable Sliding Mode Robust Control of Electro‐Hydraulic Servo System (EHSS)

An electro‐hydraulic servo system (EHSS) is a kind of system with the characteristics of time‐variant, serious nonlinearity, parameter and structural uncertainty, and uncertain load disturbance in most cases. These characteristics make it very difficult to realize highly accurate control by conventional methods. In order to solve the above problems, this paper introduces a recurrent type 2 fuzzy wavelet neural network to approximate the unknown nonlinear functions of the dynamic systems through tuning by the desired adaptive law. Based on the identification by recurrent type 2 fuzzy wavelet neural network, a L2 gain design method, combining gain adaptive variable sliding mode control with H infinity control, is proposed for load disturbance, thereby accommodating uncertainties that are the main factors affecting system stability and accuracy in EHSS. In this algorithm, a recurrent type 2 fuzzy wavelet neural network is employed to evaluate the unknown dynamic characteristics of the system and gain adaptive variable sliding mode control to compensate for evaluating errors, and H infinity control to suppress the effect on system by load disturbance. The experiment results show that the proposed system L2 gain design method can make the system exhibit strong robustness to parameter variation and load disturbance.     

液压驱动伺服机器人的模糊滑模控制研究

针对液压驱动四足机器人伺服系统非线性和不确定性严重的问题,提出了一种快速响应、鲁棒性好、控制精度高的模糊滑模控制器,并进行了仿真研究.首先,建立了液压驱动伺服机器人的液压动力机构非线性数学模型,利用Lyapunov方法设计了滑模控制器;其次,构造了一个模糊边界层宽度调节器,削弱滑模控制的抖振;最后,分析了参考力、液压参数、供油压力及负载刚度变化对系统输出的影响.仿真结果表明,该控制器对液压伺服力系统非线性和参数变化具有较好的控制效果.该方法用于四足液压驱动伺服机器人的控制是可行的、有效的.     

Adaptive sliding mode controller design based on T-S fuzzy system models

An adaptive sliding mode control (ASMC) technique based on T-S fuzzy system models is proposed in this paper for a class of perturbed nonlinear MIMO dynamic systems in order to solve tracking problems. A T-S fuzzy model is firstly formed by utilizing fuzzy theorem to amalgamate a set of linearized dynamic equations. The adaptive sliding mode controller is then designed based on this fuzzy model with perturbations. The proposed control scheme can drive the dynamics of controlled system into a designated sliding surface in finite time, and guarantee the property of asymptotical stability. It is also shown that the information of upper bound of modeling errors as well as perturbations, except the information of upper bound of input uncertainty, is not required when using the proposed controller.     

An optimal adaptive robust PID controller subject to fuzzy rules and sliding modes for MIMO uncertain chaotic systems

In this paper, an optimal adaptive robust PID controller based on fuzzy rules and sliding modes is introduced to present a general scheme to control MIMO uncertain chaotic nonlinear systems. In this control scheme, the gains of the PID controller are updated by using an adaptive mechanism, fuzzy rules, the gradient search method, and the chain rule of differentiation in order to minimize the sliding surfaces of sliding mode control. More precisely, sliding mode control is used as a supervisory controller to provide sufficient control inputs and guarantee the stability of the control approach. To ascertain the parameters of the proposed controller and avoid trial and error, the multi-objective genetic algorithm is employed to augment the performance of proposed controller. The chaotic system of a Duffing-Holmes oscillator and an industrial robotic manipulator are the case studies to evaluate the performance of the proposed control approach. The obtained results of this study regarding both systems are compared with the outcomes of two notable studies in the literature. The results and analysis prove the efficiency of the proposed controller with regard to MIMO uncertain systems having challenging external disturbances in terms of stability, minimum tracking error and optimal control inputs.     

Sliding mode control of wind-induced vibrations using fuzzy sliding surface and gain adaptation

Although fuzzy/adaptive sliding mode control can reduce the chattering problem in structural vibration control applications, they require the equivalent control and the upper bounds of the system uncertainties. In this paper, we used fuzzy logic to approximate the standard sliding surface and designed a dead-zone adaptive law for tuning the switching gain of the sliding mode control. The stability of the proposed controller is established using Lyapunov stability theory. A six-storey building prototype equipped with an active mass damper has been used to demonstrate the effectiveness of the proposed controller towards the wind-induced vibrations.     

一类MIMO非线性系统的直接自适应模糊滑模控制

针对一类具有下三角形函数控制增益矩阵的非线性系统, 基于滑模控制原理, 并利用Ⅱ型模糊系统的逼近能力, 提出了一种直接自适应模糊滑模控制器设计的新方案. 通过引入积分型李雅普诺夫函数及逼近误差自适应补偿项, 证明了闭环系统是全局稳定的, 跟踪误差收敛到零. 仿真结果表明了该方法的有效性.     

一类非线性系统的间接自适应模糊滑模控制

基于启发式知识的模糊控制是一种解决非线性系统控制问题的有效方法。然而其设计缺乏系统性,并且系统的稳定性和鲁棒性难以保证。本文利用滑模控制的概念和Lyapunov综合方法提出一种针对一类非线性系统的间接自适应模糊滑模控制（IAFSMC）方法。仿真研究表明即使在缺少系统先验知识和不确定性干扰的情况下,系统性能也十分理想。     

Robust decentralized adaptive fuzzy control for a class of large‐scale MIMO nonlinear systems

In this paper, a novel decentralized robust adaptive fuzzy control scheme is proposed for a class of large‐scale multiple‐input multiple‐output uncertain nonlinear systems. By virtue of fuzzy logic systems and the regularized inverse matrix, the decentralized robust indirect adaptive fuzzy controller is developed such that the controller singularity problem is addressed under a united design framework; no a priori knowledge of the bounds on lumped uncertainties are being required. The closed‐loop large‐scale system is proved to be asymptotically stable. Simulation results confirmed the validity of the approach presented. Copyright © 2011 John Wiley & Sons, Ltd.     

Recursive Back‐Stepping Design of An Adaptive Fuzzy Controller for Strict Output Feedback Nonlinear Systems

In this paper, a back‐stepping adaptive fuzzy controller is proposed for strict output feedback nonlinear systems. The unknown nonlinearity and external disturbances of such systems are considered. We assume that only the output of the system is available for measurement. As a result, two filters are constructed to estimate the states of strict output feedback systems. Since fuzzy systems can uniformly approximate nonlinear continuous functions to arbitrary accuracy, the adaptive fuzzy control theory combined with a tuning function scheme is developed to derive the control laws of strict output feedback systems that possess unknown functions. Moreover, the H∞ performance condition is introduced to attenuate the effect of the modeling error and external disturbances. Finally, an example is simulated in order to confirm the applicability of the proposed method.     

Fault Diagnosis and Sliding Mode Fault Tolerant Control for Non‐Gaussian Stochastic Distribution Control Systems Using T‐s Fuzzy Model

For the non‐Gaussian stochastic distribution control system using Takagi‐Sugeno fuzzy model, a new fault diagnosis and sliding mode fault tolerant control algorithm is presented. First, a new adaptive fault diagnosis algorithm is adopted to diagnose the fault that occurred in the system, and the observation error system is proven to be uniformly bounded. Second, the sliding mode control algorithm is used to reconfigure the controller, based on the fault estimation information. The post‐fault probability density function can still track the given distribution, leading to fault tolerant control of non‐Gaussian stochastic distribution control systems using Takagi‐Sugeno fuzzy model. Finally, simulation results show the effectiveness of the proposed method.     

基于自适应模糊滑模控制的分数阶混沌系统的投影同步

基于模糊控制理论和滑模控制理论以及自适应控制理论,研究了一类含有外部扰动的不确定分数阶混沌系统的混合投影同步问题.提出了一种自适应模糊滑模控制的分数阶混沌系统投影同步方法.模糊逻辑系统用来逼近未知的非线性函数和外部扰动,并且对逼近误差采用了自适应控制,同时构造了一种具有较强鲁棒性的分数阶积分滑模面.应用分数阶Barbalat引理设计了自适应模糊滑模控制器和参数自适应律.最后数值仿真结果验证了所提控制方法的有效性.     

Decentralized adaptive fuzzy sliding mode control for reconfigurable modular manipulators

A stable decentralized adaptive fuzzy sliding mode control scheme is proposed for reconfigurable modular manipulators to satisfy the concept of modular software. For the development of the decentralized control, the dynamics of reconfigurable modular manipulators is represented as a set of interconnected subsystems. A first‐order Takagi–Sugeno fuzzy logic system is introduced to approximate the unknown dynamics of subsystem by using adaptive algorithm. The effect of interconnection term and fuzzy approximation error is removed by employing an adaptive sliding mode controller. All adaptive algorithms in the subsystem controller are derived from the sense of Lyapunov stability analysis, so that resulting closed‐loop system is stable and the trajectory tracking performance is guaranteed. The simulation results are presented to show the effectiveness of the proposed decentralized control scheme. Copyright © 2009 John Wiley & Sons, Ltd.     

基于量子遗传算法的模糊滑模控制

针对一类具有不确定性的非线性系统,提出了一种新的基于量子遗传算法的模糊滑模控制器的设计方法.将模糊控制与滑模控制相结合,利用滑模控制使系统跟踪误差进入边界层内;启用模糊控制替代切换控制,并在边界层上通过监督函数平滑控制作用.在滑动模态产生条件下,通过量子遗传算法优化模糊控制器的控制规则,有效地解决了模糊滑模控制中模糊控制规则的确定问题,从而削弱了系统的抖振,改善了控制器的控制性能.仿真结果表明了该方法的有效性.     

Adaptive fuzzy semi‐decentralized control for a class of large‐scale nonlinear systems with unknown interconnections

In this paper, a general method is developed to generate a stable adaptive fuzzy semi‐decentralized control for a class of large‐scale interconnected nonlinear systems with unknown nonlinear subsystems and unknown nonlinear interconnections. In the developed control algorithms, fuzzy logic systems, using fuzzy basis functions (FBF), are employed to approximate the unknown subsystems and interconnection functions without imposing any constraints or assumptions about the interconnections. The proposed controller consists of primary and auxiliary parts, where both direct and indirect adaptive approaches for the primary control part are aiming to maintain the closed‐loop stability, whereas the auxiliary control part is designed to attenuate the fuzzy approximation errors. By using Lyapunov stability method, the proposed semi‐decentralized adaptive fuzzy control system is proved to be globally stable, with converging tracking errors to a desired performance. Simulation examples are presented to illustrate the effectiveness of the proposed controller. Copyright © 2006 John Wiley & Sons, Ltd.     

FPGA‐based adaptive dynamic sliding‐mode neural control for a brushless DC motor

In the adaptive neural control design, since the number of hidden neurons is finite for real‐time applications, the approximation errors introduced by the neural network cannot be inevitable. To ensure the stability of the adaptive neural control system, a switching compensator is designed to dispel the approximation error. However, it will lead to substantial chattering in the control effort. In this paper, an adaptive dynamic sliding‐mode neural control (ADSNC) system composed of a neural controller and a fuzzy compensator is proposed to tackle this problem. The neural controller, using a radial basis function neural network, is the main controller and the fuzzy compensator is designed to eliminate the approximation error introduced by the neural controller. Moreover, a proportional‐integral‐type adaptation learning algorithm is developed based on the Lyapunov function; thus not only the system stability can be guaranteed but also the convergence of the tracking error and controller parameters can speed up. Finally, the proposed ADSNC system is implemented based on a field programmable gate array chip for low‐cost and high‐performance industrial applications and is applied to control a brushless DC (BLDC) motor to show its effectiveness. The experimental results demonstrate the proposed ADSNC scheme can achieve favorable control performance without encountering chattering phenomena. Copyright © 2010 John Wiley and Sons Asia Pte Ltd and Chinese Automatic Control Society     

Reliable control design for composite‐driven scheme based on delay networked T‐S fuzzy system

This paper is focused on reliable controller design for a composite‐driven scheme of networked control systems via Takagi‐Sugeno fuzzy model with probabilistic actuator fault under time‐varying delay. The proposed scheme is distinguished from the other schemes as mentioned in this paper. Aims of this article are to solve the control problem by considering the H_∞, dissipative, and L₂?L_∞ constraints in a unified way. Firstly, to improve the efficient utilization of bandwidth, the adaptive composite‐driven scheme is introduced. In such a scenario, the channel transmission mechanism can be adjusted between adaptive event‐triggered generator scheme and time‐driven scheme. In this study, the threshold is dependent on a new adaptive law, which can be obtained online rather than a predefined constant. With a constant threshold, it is difficult to get the variation of the system. Secondly, a novel fuzzy Lyapunov‐Krasovskii functional is constructed to design the fuzzy controller, and delay‐dependent conditions for stability and performance analysis of the control system are obtained. Then, LMI‐based conditions for the existence of the desired fuzzy controller are presented. Finally, an inverted pendulum that is controlled through the channel is provided to illustrate the effectiveness of the proposed method.     

一种新的自适应模糊滑模控制器设计方法

对一类非线性系统提出一种新的自适应模糊滑模控制器设计方法。将自适应模糊控制与滑模控制有效地结合在一起,先用滑模控制使跟踪误差进入边界层内,然后启动自适应模糊控制器。该控制器可消除滑模控制器中出现的抖振,并可在存在模糊逻辑系统逼近误差情况下使系统跟踪误差小于预先给定的任意常数。仿真算例验证了所提出方法的有效性。