Theoretical aspects of bonding in silicon compounds

Ab initio-calculated bond dissociation energies of Si=Si and C=C are discussed by means of atomic ionization energies and p-p() AO overlap. At the same time ring strain energies of C- as well as Si-rings are estimated by homodesmic reactions where, according to Baeyer, the two-membered rings C=C and Si=Si are chosen to be the first members of the respective series. Thus, a better understanding of the double bonds can be gained. In addition, the exceptional structural and spectroscopic behavior of the five-membered Si-ring is discussed. Finally, the strikingly different results obtained in computational studies of the initial step for polymerization of the systems O=C=O and O=Si=O are discussed.     

Ultradrawing of “springy” polypropylene films

Summary It is demonstrated that in the process of ultradrawing of semicrystalline polypropylene the morphology of the initial material plays major role. Extremely high draw ratios are obtained (_max50) when drawing hard elastic polypropylene films perpendicular to their initial molecular orientation. This behaviour is explained by the molecular processes of plastic deformation.     

Synthesis of new metal-containing side-chain monomers and polymers

New metal-containing vinyl monomers, hexyl-6-oxy-{4-[4-(4-carboxy cyclopentadienyl manganese tricarbonyl phenyl)phenyl]benzoyloxy}methacrylate and hexyl-6-oxy-{4-[4-(4-ferrocenoyl phenyl)phenyl]benzoyloxy}methacrylate, and the corresponding homopolymers and random copolymers with hydroxy monomer hexyl-6-oxy-{4-[4-(4-hydroxyphenyl)phenyl]benzoyloxy}methacrylate were synthesized. The compounds were characterized by¹H NMR; their thermal behavior was investigated by means of differential scanning calorimetry. Monomers and polymers containing the ferrocene unit melt at lower temperatures than those derived from the cyclopentadienyl managanese tricarbonyl moiety. The melting temperatures of the monomers and polymers ranged from 399 to about 515 K, Both monomers and polymers failed to exhibit mesogenic behavior. Values ofM _n,M _w,M _w/M _n, and degree of polymerization were obtained by gel permeation chromatography. TheM _n ranged from 16,500 for the copolymer containing hexyl-6-oxy-{4-[4-(4-ferrocenoyl phenyl)phenyl] benzoyloxy}methacrylate and hydroxy monomer hexyl-6-oxy-{4-[4-(4-hydroxyphenyl)phenyl]benzoyloxy}methacrylate at a 1:3 ratio to 26,000 for the copolymer containing hexyl-6-oxy-{4-[4-(4-carboxy cyclopentadienyl manganese tricarbonyl phenyl)phenyl]benzoyloxy}methacrylate and hydroxy monomer hexyl-6-oxy-{4-[4-(4-hydroxyphenyl)phenyl]benzoyloxy}methacrylate at a 1:3 ratio.M _w/M _n ranged from 1.6 in the case of the copolymer containing hexyl-6-oxy-{4-[4-(4-carboxy cyclopentadienyl manganese tricarbonyl phenyl)phenyl]benzoyloxy}methacrylate and hydroxy monomer hexyl-6-oxy-{4-[4-(4-hydroxyphenyl)phenyl]benzoyloxy}methacrylate at a 1:3 ratio to 2.2 in the case of poly(hexyl-6-oxy{4-[4-(4-carboxy cyclopentadienyl manganese tricarbonyl phenyl)phenyl]benzoyloxy}methacrylate).     

Cooperative inclusion of sodium 1-pyrenesulfonate by γ-cyclodextrin

Summary The interaction of -cyclodextrin(-CD) with sodium 1-pyrenesulfonate(PS) was studied spectrophotometrically. -CD was found to cause much larger decrease in the absorption maxima of PS than -CD. The fluorescence spectra of PS in the presence of -CD showed excimer emission, while those of PS with -CD showed only monomer emission, indicating that -CD forms 12 (-CDPS) complexes in which two PS molecules are included in the -CD cavity in a face-to-face fashion. The binding isotherm showed a sigmoidal curve. The association constants were estimated by computer simulation of the binding curve. The 12 (CDPS) complex was found to be much more stable (K=10⁶ M^–1) than the 11 complex (K=1 M^–1). At high concentration of -CD another -CD cooperates in binding two PS molecules, resulting in the formation of a 22 complex.     

Effects of crystallinity and supermolecular formations on the interfacial shear strength and adhesion in GF/PP composites

Aim of this study was to screen the morphological effects on the interfacial shear strength (i) in glass fibre (GF) reinforced isotactic polypropylene (iPP) model composites. i was determined by a modified single fibre pull-out technique. It was established that the relation between i (5–6 MPa) and the yield stress of the iPP (y30 MPa) is at about 1:6 and that the i values were not influenced by the mophological superstructure set under isothermal crystallization conditions. Increased i was only observed when specimens were produced non-isothermally, by quenching (i9 MPa). This improvement could not be related to thermal shrinkage stresses. The enhancement in i was attributed to better wetting and improved adhesion due to the enlarged amorphous PP (aPP)-phase. A schematic adhesion model considering the wetting behaviour of aPP and iPP was proposed.     

Quasi‐Homogeneous and Pseudospin Modes of Zirconium‐Wire Combustion in Air

A novel experimental technique is proposed for examining the transition mechanism from quasihomogeneous to heterogeneous combustion — burning of a variablepitch spring. Depending on the pitch of aircombustible zirconium springs, two combustion modes are possible. Quasihomogeneous (layerbylayer) combustion is observed in the case of smallpitch springs; as the spring pitch increases, quasihomogeneous combustion transforms into heterogeneous (pseudospin) combustion. Conditions for the occurrence of various combustion modes, depending on the spring diameter and pitch, are studied.     

Mechanical Sensitivity and Detonation Parameters of Aluminized Explosives

Experiments were performed to study the effect of the species particle size and structure of aluminized mixture samples on the sensitivity and detonation parameters of HMX, nitroguanidine, bis(2,2,2trinitroethyl)nitramine, and their mixtures with an Al powder with a mean particle size of 0.1 – 150 m. The addition of ultrafine Al to HMX and bis (2,2,2trinitroethyl)nitramine substantially increases the sensitivity to mechanical effects and decreases the detonation velocity. In compositions with nitroguanidine, the detonation velocity practically does not vary. For nitroguanidine, the width of the chemicalreaction zone and Chapman–Jouguet parameters were determined by recording the detonationpressure profiles. The pressure profiles for bis(2,2,2trinitroethyl)nitramine show that detonation decomposition can occur in two stages. A twopeak detonationwave structure was detected for mixtures of HMX with Al. Temperature measurements indicate that Al interacts with detonation products in the immediate proximity to the front. The highest temperature was recorded for compositions containing ultrafine aluminum and an aluminum dust.     

Localization of Deformation in Copper Single Crystals During Explosive Collapse

It is established that highrate axisymmetric loading of single crystals by the method of explosive collapse of a hollow thickwalled cylinder causes deformation that involves all active closepacked slip systems. The spatial distribution of macroscopic sites of strain localization is determined by the crystallography of the active systems in singlecrystalline samples. The established correlation between the observed shear bands in the microstructure of copper single crystals and {111} active slip <110> systems of facecentered cubic (FCC) crystals and their symmetric arrangement show that deformation at a rate of 5 · 10⁴ sec^-1 occurs according to the crystalline structure of the materials.     

Properties ofSrMO 3-δ(M=Fe,Co) as oxygen electrodes in alkaline solution

Strontium ferrates and cobaltates with compositions SrFeO_3- (0.060.40) and SrCoO_3- (0.040.30) were synthesized. The dependence of the oxygen electrode properties on the value was examined in 1 mol dm^–3 KOH solution. In the SrFeO_3- series, the samples with 0.24<<0.29, showed the highest activity in both oxygen evolution and reduction reactions. In contrast, no strong dependence on the value was observed in SrCoO_3-, which also showed a high catalytic activity for oxygen evolution.     

On the preparation and properties of CuZSM-5 catalysts for NO decomposition

Equilibrium exchange isotherms were determined for the exchange of Cu²⁺ with NaZSM-5 at varying Cu(Ac)₂ concentrations in solutions of constant volume and zeolite weight. At low Cu²⁺ levels the solid scavenged all the copper ions. When copper could be detected in the equilibrated solutions, overexchange was observed. The extent of overexchange was higher at pH 6 than at pH 4. These results were analyzed in relation to catalytic activity.On leave from the Central Institute for Chemistry, Hungarian Academy of Sciences, H1525 Budapest, Hungary.     

EXOGENOUS METHYL JASMONATE INDUCES VOLATILE EMISSIONS IN COTTON PLANTS

We investigated the effect of exogenous methyl jasmonate (MeJA) on the emission of herbivore-induced volatiles; these volatile chemicals can signal natural enemies of the herbivore to the damaged plant. Exogenous treatment of cotton cv. Deltapine 5415 plants with MeJA induced the emission of the same volatile compounds as observed for herbivore-damaged plants. Cotton plants treated with MeJA emitted elevated levels of the terpenes (E)--ocimene, linalool, (3E)-4,8-dimethyl-1,3,7-nonatriene, (E,E)--farnesene, (E),--farnesene, and (E,E)-4,8,12-trimethyl-1,3,7,11-tridecatetraene compared to untreated controls. Other induced components included (Z)-3-hexenyl acetate, methyl salicylate, and indole. Methyl jasmonate treatment did not cause the release of any of the stored terpenes such as -pinene, -pinene, -humulene, and (E)--caryophyllene. In contrast, these compounds were emitted in relatively large amounts from cotton due to physical disruption of glands by the herbivores. The timing of volatile release from plants treated with MeJA or herbivores followed a diurnal pattern, with maximal volatile release during the middle of the photoperiod. Similar to herbivore-treated plants, MeJA treatment led to the systemic induction of (Z)-3-hexenyl acetate, (E)--ocimene, linalool, (3E)-4,8-dimethyl-1,3,7-nonatriene, (E,E)--farnesene, (E)--farnesene, and (E,E)-4,8,12-trimethyl-1,3,7,11-tridecatetraene. Our results indicate that treatment of cotton with MeJA can directly and systemically induce the emission of volatiles that may serve as odor cues in the host-search behavior of natural enemies.     

Weak Gel Behaviour of Poly(vinyl alcohol)-Borax Aqueous Solutions

Thermal transition of PVA-borax aqueous gels with a PVA concentration of 60 g/L and a borax concentration of 0.28 M was investigated at temperatures ranging from 15 to 60C using static light scattering (SLS), dynamic light scattering (DLS), and dynamic viscoelasticity measurements. Three relaxation modes, i.e. two fast and one slow relaxation modes, were observed from DLS measurements. Two fast relaxation modes located around 10^–310¹ sec, with one fast mode (_f1) being scattering vector q-dependent and the other fast mode (_f2, with _f2>_f1) being q-independent. The _f1 mode was attributed to the gel mode whilst the _f2 mode could be due to the hydrodynamics of intra-molecular hydrophobic domains formed by uncharged segments of polymer backbones. The slow relaxation mode with relaxation time located around 10¹10³ sec in DLS data was due to the motion of aggregated clusters and was observed only at temperatures above 40C. The amplitude and relaxation time of slow mode decrease as temperature is increased from 40 to 60C. At temperatures below 40C, no slow relaxation mode was observed. The SLS measurements showed PVA-borax-water system had fractal dimensions D _f2.4 and D _f2.0 as temperature was below and above 40C, respectively. The simple tilting test indicated gel behaviour for the PVA-borax aqueous system at temperatures below 40C with a creep flow after a long time exposure in the gravity field. But the dynamic viscoelasticity measurements demonstrated a solution behaviour for PVA/borax/water at temperatures below 40C, the critical gel point behaviour for G() and G() was not observed in this system as those reported for chemical crosslinked gels. These results suggest that the PVA-borax aqueous system is a thermoreversible weak gel.     

State of platinum in zirconia and sulfated zirconia catalysts

Platinum is present in a metallic state following activation in air at 725C of both 5 wt% Pt/ZrO₂ and 5 wt% Pt/SO ₄ ^2– /ZrO₂. Reduction of either catalyst at 725C produces a Pt-Zr alloy, and these reduced catalysts, upon recalcination in air at 725C, form metallic Pt crystallites. Likewise, reduction of these uncalcined catalysts at 725C in H₂ leads to a Pt-Zr alloy formation. However, treatment of these uncalcined catalysts in H₂ at 450C does not produce Pt crystallites large enough to detect by XRD.     

Synergistic Catalysis of Carbon Dioxide Hydrogenation into Methanol by Yttria-Doped Ceria/γ-Alumina-Supported Copper Oxide Catalysts: Effect of Support and Dopant

Methanol synthesis from carbon dioxide hydrogenation was studied over ceria/-alumina- and yttria-doped ceria (YDC)/-alumina-supported copper oxide catalysts to seek insight into the catalysis at metal–support interfaces. It was found that, in comparison with Cu/-Al₂O₃, the Cu/CeO₂/-Al₂O₃ and Cu/YDC/-Al₂O₃ catalysts exhibited substantial enhancement in activity and selectivity toward methanol formation. The extent of enhancement was augmented by increased ceria loading on -alumina and with increased yttria doping into ceria. The enhancement is inferred to result from the synergistic effect between copper oxide and surface oxygen vacancies of ceria.     

Monoterpene effect on feeding choice by deer

A previous study showed that Sitka black-tailed deer (Odocoileus hemionus sitkensis) consumption was negatively correlated with monoterpene content in western redcedar (Thuja plicata). To test whether these monoterpenes were deterrent to Sitka black-tailed deer, we performed feeding choice experiments with four hydrocarbon (sabinene, myrcene, -pinene, and d + l-limonene) and one oxygenated (,-thujone) monoterpene solution at their highest natural concentration in western redcedar foliage. To test whether deer response was species specific, we ran similar experiments on European roe deer (Capreolus capreolus) and rusa deer (Cervus timorensis russa). In all experiments, monoterpenes were repellent. Solutions with ,-thujone, the major monoterpene in redcedar leaves, were the most repellent of the solutions tested. We then analyzed how black-tailed and roe deer responded to (1) an increase in concentration of the monoterpenes with the weakest repellent effects (hydrocarbon monoterpenes) and (2) a decrease in concentration of the monoterpene with strongest effect (,-thujone). Repellency tended to increase with concentration for hydrocarbon monoterpenes, but remained strong for ,-thujone. As wild deer regularly feed on plants containing monoterpenes, this raises the question as to how the animals deal with these molecules.     

Characterization of some organic poly(aminiumphosphate)s

Summary Metachromatic reactions of MB and AO are studied with poly(aminium phosphate)s. The main band() at 665 m and 492 m for MB and AO are shifted to 580 m and 455 m respectively (-bands). The metachromatic values at different concentrations of poly(aminium phosphate)s are also reported. The dye association for MB with these polymer derivatives is investigated conductometrically as well. It is observed that MB can be at the most bind with the phosphate residue of polymer upto 11 molar ratio. The polymeric nature was further established by paper chromatographic technique in Terry's, Ebel's & Pfrengle's solvents.     

Deposition of nanocrystals on flat supports by spin-coating

Monodisperse particles can be evenly distributed over flat supports by spin-impregnation. In this way Cu precursors have been deposited onto Si wafers. The effects of the rotation frequency and the concentration of the impregnation solution have been investigated. The mean diameter of the deposited particles can be varied from several nanometers upto several micrometers as is shown by microscopy images. Spin-impregnation appears a useful tool to prepare well-defined flat model catalysts, which are readily accessible both to quantitative characterisation and to catalytic testing.     

Convective Regime of Filtration Combustion of Energetic Materials in a Cocurrent Flow of Their Combustion Products

The convective regime of filtration combustion of energetic materials in a cocurrent flow of their combustion products is studied using a model with extremely simplified kinetics and heat transfer, which shows instability of the process. It is shown that the more accurate twotemperature model describes a steadystate regime. In this regime, the gas temperature on the hot boundary of the heating zone is well below the combustion temperature, and the solidphase temperature is well below the temperature proposed in recent studies on this topic. It is pointed out that the twotemperature approach is unjustified and intragranular nonisothermicity must be taken into account for convective regimes. It is shown that the threetemperature model, which takes into account this effect, does not give a stable steadystate solution.     

Lamellar Thickness of a Syndiotactic Polystyrene Determined from Small-angle X-ray Scattering and Transmission Electron Microscopy

Extensive morphological studies on a syndiotactic polystyrene (sPS) sample prepared from compression molding were carried out using small-angle X-ray scattering (SAXS) and transmission electron microscopy (TEM). SAXS was conducted at 25C as well as at 150C to enhance the scattering contrast in order to obtain more reliable morphological parameters. The compression-molded sample was crystallized into a orthorhombic crystal lattice characterized by wide-angle X-ray diffraction (WAXD). A similar weight fraction of crystallinity, ca. 0.37, was obtained from both WAXD and differential scanning calorimetry measurements.In addition to the scattering peak at a scattering vector of ca. 0.36 nm^–1 attributable to the presence of lamellar/amorphous layers, anomalous scattering at the zero angle was found from the SAXS intensity profiles. Based on the Debye–Bueche theory, the scattering profile of this peculiar zero-angle scattering was deduced and was subtracted from the raw intensity profile to obtain the intensity profile exclusively associated with the lamellar/amorphous structure. A consistent long period was obtained for SAXS measured either at 25 or 150C, provided that the appropriate subtraction of intensities due to the zero-angle scattering was conducted. Moreover, the lamellar thickness deduced from the one-dimensional correlation function was in good agreement with TEM results. A difference scattering pattern derived from SAXS measured at 150 and 25C was obtained and a comparison of the morphological parameters was provided as well.     

Composition of aphid alarm pheromones

Analysis of single cornicle droplets from six species of aphid showed the presence of volatile components in addition to (E)--farnesene. Compounds identified included (Z,E)-- and (E,E)--farnesene forMyzus persicae and - and -pinene forMegoura viciae. WithMegoura viciae, (–)--pinene was most important for alarm activity. The major component of the alarm pheromone ofPhorodon humuli was (E)--farnesene even though farnesenes are present in the summer hostHumulus lupulus.