Although gas-filled microbubbles with high echogenicity are widely applied inclinical ultrasonography, the micron scale particle size impedes their use in the treatment of solid tumors,which are accessible to objects less than several hundred nanometers. We herein propose an unusual approach involving apH-induced core–shell micelle-to-vesicle transition to prepare ultrasound-sensitive polymeric nanospheres (polymersomes in structure) possessing multiple features, including nanosize, monodispersity, and incorporation of a phase-transitional imaging agent into the aqueous lumen. These features are not achievable via the conventional double-emulsion method for polymersome preparation. The nanospheres were constructed based on a novel triblock copolymer with dual pH sensitivity. The liquid-to-gas phase transition of the imaging agent induced by external low-frequency ultrasound may destroy the nanospheres for a rapid drug release, with simultaneous tissue-penetrating drug delivery inside a tumor. These effects may provide new opportunities for the development of an effective cancer therapy with few adverse effects.
Hollow nanostructures have attracted considerable attention owing to their large surface area, tunable cavity, and low density. In this study, a unique flower-like C@SnOX@C hollow nanostructure (denoted as C@SnOX@C-1) was synthesized through a novel one-pot approach. The C@SnOX@C-1 had a hollow carbon core and interlaced petals on the shell. Each petal was a SnO2 nanosheet coated with an ultrathin carbon layer ~2 nm thick. The generation of the hollow carbon core, the growth of the SnO2 nanosheets, and the coating of the carbon layers were simultaneously completed via a hydrothermal process using resorcinol-formaldehyde resin-coated SiO2 nanospheres, tin chloride, urea, and glucose as precursors. The resultant architecture with a large surface area exhibited excellent lithium-storage performance, delivering a high reversible capacity of 756.9 mA·h·g–1 at a current density of 100 mA·g–1 after 100 cycles.
A thermal emitter composed of a frequency-selective surface metamaterial layer and a hexagonal boron nitride-encapsulated graphene filament is demonstrated. The broadband thermal emission of the metamaterial (consisting of ring resonators) was tailored into two discrete bands, and the measured reflection and emission spectra agreed well with the simulation results. The high modulation frequencies that can be obtained in these devices, coupled with their operation in air, confirm their feasibility for use in applications such as gas sensing.
This paper offers a comprehensive overview on the role of nanostructures in the development of advanced anode materials for application in both lithium and sodium-ion batteries. In particular, this review highlights the differences between the two chemistries, the critical effect of nanosize on the electrode performance, as well as the routes to exploit the inherent potential of nanostructures to achieve high specific energy at the anode, enhance the rate capability, and obtain a long cycle life. Furthermore, it gives an overview of nanostructured sodium- and lithium-based anode materials, and presents a critical analysis of the advantages and issues associated with the use of nanotechnology.
In this paper, we demonstrate that for colloidal CdSe/CdS nanoplatelets, a rectangular shape induces emission asymmetry, in terms of both polarization and emission patterns. Polarimetry and emission pattern analyses are combined to provide information on the orientation of the transition dipoles involved in the nanoplatelet emission. It is shown that for rectangular nanoplatelets, the emission is polarized and the emission patterns are anisotropic, whereas they remain nonpolarized and isotropic for square nanoplatelets. This can be appropriately described by the dielectric antenna effect induced by the elongated shape of the rectangular platelet.
Multi-shelled CoFe2O4 hollow microspheres with a tunable number of layers (1–4) were successfully synthesized via a facile one-step method using cyclodextrin as a template, followed by calcination. The structural features, including the shell number and shell porosity, were controlled by adjusting the synthesis parameters to produce hollow spheres with excellent capacity and durability. This is a straightforward and general strategy for fabricating metal oxide or bimetallic metal oxide hollow microspheres with a tunable number of shells.
Sodium-ion batteries have received remarkable attention as next-generation high-performance electrochemical energy storage devices because of their cost effectiveness and the broad geographical distribution of sodium. As a critical component of sodium-ion batteries, anode materials, especially nanostructured anodes, have a significant effect on the electrochemical performance of sodium-ion batteries. Recent research indicates that phosphorus and metal phosphides show great promise as anode candidates for sodium-ion batteries because of their low cost and relatively high theoretical gravimetric and volumetric specific capacities. In this review, we systematically summarize recent research progress on state-of-the-art nanostructured phosphorus and phosphides, including the synthetic strategies, Na-storage mechanisms, and the relationship between the nanostructure and electrochemical performance. Moreover, we present an overview of future challenges and opportunities based on current developments.
The wetting properties of an electrode surface are of significant importance to the performance of electrochemical devices because electron transfer occurs at the electrode/electrolyte interface. Described in this paper is a low-cost metal oxide electrocatalyst (CuO)-based high-performance sensing device using an enzyme electrode with a solid/liquid/air triphase interface in which the oxygen level is constant and sufficiently high. We apply the sensing device to detect glucose, a model test analyte, and demonstrate a linear dynamic range up to 50 mM, which is about 25 times higher than that obtained using a traditional enzyme electrode with a solid/liquid diphase interface. Moreover, we show that sensing devices based on a triphase assaying interface are insensitive to the significant oxygen level fluctuation in the analyte solution.
Solid polymer electrolytes are light-weight, flexible, and non-flammable and provide a feasible solution to the safety issues facing lithium-ion batteries through the replacement of organic liquid electrolytes. Substantial research efforts have been devoted to achieving the next generation of solid-state polymer lithium batteries. Herein, we provide a review of the development of solid polymer electrolytes and provide comprehensive insights into emerging developments. In particular, we discuss the different molecular structures of the solid polymer matrices, including polyether, polyester, polyacrylonitrile, and polysiloxane, and their interfacial compatibility with lithium, as well as the factors that govern the properties of the polymer electrolytes. The discussion aims to give perspective to allow the strategic design of state-of-the-art solid polymer electrolytes, and we hope it will provide clear guidance for the exploration of high-performance lithium batteries.
Understanding how small molecules interface with amyloid fibrils at the nanoscale is of importance for developing therapeutic treatments against amyloid-based diseases. Here, we show for the first time that human islet amyloid polypeptides (IAPP) in the fibrillar form are polymorphic, ambidextrous, and possess multiple periodicities. Upon interfacing with the small molecule epigallocatechin gallate (EGCG), IAPP aggregation was rendered off-pathway and assumed a form with soft and disordered clusters, while mature IAPP fibrils displayed kinks and branching but conserved the twisted fibril morphology. These nanoscale phenomena resulted from competitive interactions between EGCG and the IAPP amyloidogenic region, as well as end capping of the fibrils by the small molecule. This information is crucial in delineating IAPP toxicity implicated in type 2 diabetes and for developing new inhibitors against amyloidogenesis.
Polyaniline nanofibers (PANI NFs) are introduced to construct a wind-driven triboelectric nanogenerator (TENG) as a new power source for self-powered cathodic protection. PANI NFs serve as a friction layer to generate charges by harvesting wind energy as well as a conducting layer to transfer charges in TENG. A PANI NFs-based TENG exhibits a high output performance with a maximum output voltage of 375 V, short current circuit of 248 μA, and corresponding power of 14.5 mW under a wind speed of 15 m/s. Additionally, a self-powered anticorrosion system is constructed by using a PANI-based TENG as the power source. The immersion experiment and electrochemical measurements demonstrate that carbon steel coupled with the wind-driven TENG is effectively protected with an evident open circuit potential drop and negative shift in the corrosion potential. The smart self-powered device is promising in terms of applications to protect metals from corrosion by utilizing wind energy in ambient conditions.
Herein, carbon nano-onions (CNOs) with different structures have been investigated as precursors for the synthesis of graphene quantum dots (GQDs). It was found that hollow CNOs yield GQDs with a uniform size distribution, whereas metal encapsulation in the CNO structure is disadvantageous for the same. Furthermore, the hollow CNOs are also advantageous for the synthesis of GQDs with a yellow-green hybrid luminescence and long-ranged excitation wavelength (λex)-independent photoluminescent (PL) behavior, in which the λex upper limit was 480 nm. These features enable safe sensing and cell tracking applications with a longer excitation wavelength in the visible light region. The potential applications of the synthesized GQDs as fluorescent sensing probes for detecting Cu(II) ions and non-toxic cell imaging under visible light excitation have been demonstrated. This means that sensing and bioimaging can be accomplished in the natural environment with no need for UV excitation. This work provides a reference to researchers in tailoring CNO structures in terms of their inner space to synthesize GQDs with the desired luminescence behavior.
Zinc-air batteries have recently attracted considerable interest owing to the larger storage capacity and lower cost compared to their lithium-ion counterparts. Electrode catalysts for the oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) play a critical role in the operation of rechargeable zinc-air batteries. Herein, we report a simple and scalable strategy to fabricate porous carbon polyhedra using Zn-doped Co-based zeolitic imidazolate frameworks (ZnCo-ZIFs) as precursors. Strikingly, Zn doping leads to smaller Co nanoparticles and higher nitrogen content, which in turn enhances the ORR and OER activities of the obtained porous carbon polyhedra. The synergistic effect of the N-doped carbon and cobalt nanoparticles in the composite, the improved conductivity resulting from the high graphitization of carbon, and the large surface area of the porous polyhedral structure resulted in porous carbon polyhedra with excellent ORR and OER electrocatalytic activity in alkaline media. More importantly, air cathodes based on the optimal porous carbon polyhedra further exhibited superior performance to Pt/C catalysts in primary and rechargeable zinc-air batteries.
Yolk/shell (Y–S) hybrid nanoarchitectures, owing to the interior voids created for individualized catalyst applications, have emerged as new candidates for effectively isolating catalytic species. However, the well-defined hollow interiors with flexible core and shell compositions—such as noble-metal cores, metal-oxide cores, and widespread semiconductor shells—and a flexible anisotropic shape are far from the requirements. In particular, the introduction of catalytic noble metals or metal-oxide nanocrystals (NCs) with isotropic or anisotropic shapes into various hollow semiconductor structures with well-defined morphologies has been rarely reported but is urgently needed. Herein, we propose a strategy involving the careful sulfuration of as-prepared cavity-free core/shell NCs or metal-oxide NCs followed by phosphine-initialized cation-exchange reactions for preparing metal@semiconductor and metal oxide@semiconductor (II-VI) Y–S NCs. The geometry, size, and conformations of the core and shell are fully and independently considered. New and unprecendented metal@semiconductor and metal oxide@semiconductor (II-VI) Y–S NCs are prepared via widespread phosphine-initialized cation-exchange reactions.
Electronic adjustment is one of the most commonly used strategies to improve the catalytic performance of heterogeneous catalysts. We prepared hexagonal ultrathin Pd nanosheets with edges modified by gold nanoparticles (Au@Pd nanosheets) using galvanic replacement method. By virtue of the electronic interactions between the Pd nanosheets and Au nanoparticles, the Au@Pd nanosheets exhibited excellent catalytic performances in the carbonylation of iodobenzene by carbon monoxide. The novel nanocomposites could be applied as model catalysts to explore electronic effects in catalysis.
In this study, a potentially universal new strategy is reported for the large-scale, low-cost fabrication of visible-light-active highly ordered heteronanostructures based on the spontaneous photoelectric-field-enhancement effect inherent in pyramidal morphology. The hierarchical vertically oriented arrayed structures comprise an active molecular co-catalyst at the apex of a visible-light-active large band gap semiconductor for low-cost solar water splitting in a neutral aqueous medium without the use of a sacrificial agent.
Recently, Prussian blue and its analogues (PBAs) have attracted tremendous attention as cathode materials for sodium-ion batteries because of their good cycling performance, low cost, and environmental friendliness. However, they still suffer from kinetic problems associated with the solid-state diffusion of sodium ions during charge and discharge processes, which leads to low specific capacity and poor rate performances. In this work, novel sodium iron hexacyanoferrate nanospheres with a hierarchical hollow architecture have been fabricated as cathode material for sodium-ion batteries by a facile template method. Due to the unique hollow sphere morphology, sodium iron hexacyanoferrate nanospheres can provide large numbers of active sites and high diffusion dynamics for sodium ions, thus delivering a high specific capacity (142 mAh/g), a superior rate capability, and an excellent cycling stability. Furthermore, the sodium insertion/extraction mechanism has been studied by in situ X-ray diffraction, which provides further insight into the crystal structure change of the sodium iron hexacyanoferrate nanosphere cathode material during charge and discharge processes.
Based on the “far-field” effect of surface plasma resonance, simultaneous red–green–blue electroluminescence enhancement by facile synthesized gold nanospheres were realized in this work, which would be difficult and complex to attain using wavelength-selected localized surface plasma resonance. The plasmonic “far-field” effect can simultaneously enhance the whole emission region in the white light range, because the enhancing regions from blue to red emission are largely overlapped. By doping gold nanospheres embedded in a poly(3,4-ethylene dioxythiophene):polystyrene sulfonic acid (PEDOT:PSS) layer, yield enhancement is achieved in more than 95% devices with the best enhancing ratio of 60% and the commission International de L’Eclairage (CIE) coordinate is stable at approximately (0.33, 0.36). The plasmonic “far-field” effect requires an ultra-low working concentration of Au NPs in picomolar magnitude, and shows little negative effect on the electronic process and light scattering, which has big potential in realizing highly efficient white organic light emitting diodes.
By combining ab initio calculations and experiments, we demonstrate how the band gap of the transition metal trichalcogenide TiS3 can be modified by inducing tensile or compressive strain. In addition, using our calculations, we predicted that the material would exhibit a transition from a direct to an indirect band gap upon application of a compressive strain in the direction of easy electrical transport. The ability to control the band gap and its nature could have a significant impact on the use of TiS3 for optical applications. We go on to verify our prediction via optical absorption experiments that demonstrate a band gap increase of up to 9% (from 0.99 to 1.08 eV) upon application of tensile stress along the easy transport direction.
A micropump induces the flow of its surrounding fluids and is extremely promising in a variety of applications such as chemical sensing or mass transportation. However, it is still challenging to manipulate its pumping direction. In this study, we examine a binary micropump based on perovskite and poly[(2-methoxy-5-ethylhexyloxy)-1,4-phenylenevinylene] (MEHPPV). The micropump is operational under the influence of light. Light exhibits significant versatility in controlling the pumping phenomenon of the micropump. It governs the start and stop and also regulates the velocity and directions. The direction control signifies immense opportunities for the development of micropumps with unprecedented pumping behaviors and functions (such as heartbeat-like pumping, rectification, and amplification). This makes them potentially useful in various fields. Hence, it is expected that the micropump reported in the current study could act as a key step towards the further development of more sophisticated micropumps for diverse applications.
