基于协同过滤的电子商务个性化推荐算法研究

采用基于使用者的协同过滤推荐算法进行电子商务个性化推荐,将获取的评价数据作为推荐算法的输入,根据使用者行为的相似性获取"最近邻居"集,统计其中各邻居对项目商品的评价分数,并以使用者对项目商品的评分形式和使用者关注度最高的多个项目商品推荐列表形式进行项目商品推荐。在获取"最近邻居"集的过程中,通过使用者特征集提升电子商务推荐系统推荐最近邻居的准确度,利用兴趣度随时间变化函数修正使用者评价矩阵,从使用者特性和兴趣两方面对协同过滤推荐算法进行个性化改进。研究结果表明,所提算法推荐项目商品所需时间始终低于对比算法,且采用该推荐算法后电子商务平台交易成功率由38.4%提升至87.2%。     

基于标签与协同过滤算法的淘书吧应用

随着互联网的不断发展,电子商务的流行使人们从线下交易逐渐转为线上交易。电子商务中的推荐系统对人们日益多元化的网络消费起到了至关重要的作用。本文在传统协同过滤推荐算法基础上,加入商品标签属性,构建用户,商品,标签三者之间的关联模型。先构建用户商品评分矩阵,在计算用户对商品兴趣度时增加入标签作为权重系数,提高淘书吧应用推荐准确性。实验结果表明,该方法能有效地改进现有的推荐算法,达到更好的推荐效果。     

一种基于用户和商品属性挖掘的协同过滤算法

为了解决传统协同过滤算法数据稀疏而导致的推荐不准确等问题,引入商品属性值的概念,根据改进后的用户相似度填充用户-属性矩阵,最后对物品兴趣程度及商品属性评分和进行加权推荐。通过在电影数据集MovieLens上的实验表明,改进后的算法能够显著提升推荐准确率。     

Apriori算法在电子商务中的应用

据艾瑞咨询的统计报告显示,2013年以B2H电子商务和传统网络零售为核心代表的广义电商交易额接近10万亿,其中网络购物在未来五年中的增速预计将为22％。电子商务的发展咖剧了企业的竞争,在这个信息爆炸的时代,如何充分利用现有信息,为企业决策者提供决策支持,成为一个十分迫切的又棘手的问题。本文利Apriori算法挖掘客户的行为模式和购买组合,根据用户的兴趣度和置信度,产生相应的推荐侯选集,从而帮助网站制定针对目标客户的营销方案,进行商品推广,提高客户的忠诚度,增强电子商务网站的竞争能力。     

基于多兴趣度的图书借阅推荐系统研究与设计

针对数字图书馆图书借阅推荐系统中通常采用的协同过滤算法中存在的不足,分析了该算法存在在用户多兴趣情况下推荐时难免会产生偏差,从而降低预测推荐准确率问题,进而提出了一种基于用户多兴趣度的图书借阅推荐系统推荐算法的设计思路。该算法首先对待推荐图书进行分类,然后根据用户的借阅情况计算其对每类图书的兴趣度,将对每类图书兴趣度相似的用户聚为一类,在小范围内寻找最近邻居,最后根据用户对不同类别书目的兴趣度作为权重值来产生对该用户的每类图书的推荐数目。该算法不仅能够解决用户多兴趣度问题,同时也可减少计算工作量,提高推荐的准确率。     

一种基于RFM模型的新型协同过滤个性化推荐算法

摘要：为了提高个性化推荐效果及预测准确度,特别是针对传统算法中评分矩阵过于稀疏等问题提出一种新颖的协同过滤算法。该算法首先利用RFM模型合理地筛选用户信息,其次通过黏性客户的消费记录稠密化用户—项目评分矩阵,并改进了传统相似度计算公式。通过仿真实验证实了算法的准确性,最后将其应用于一套具有个性化商品推荐功能的系统原型中,证明了该推荐算法的有效性及实用性。     

个性化特征的电子商务智能推荐系统

以准确向用户推荐商品,提升电子商务网站销售量为目标,设计基于个性化特征的电子商务智能推荐系统.系统以个性化推荐引擎为核心,采集交易事务、商品特征、用户评价等数据,利用基于个性化特征的协同过滤推荐算法计算商品间相似度,确定新商品的近邻,根据近邻用户对新商品的评价结果选择商品进行推荐.测试结果表明,该系统的电子商务商品推荐...     

无线网络的电子商务商品自动推荐系统

传统电子商务自动推荐系统与用户的实际喜好不同,推荐后成交量低。针对上述问题,在无线网络的基础上,设计了一种新的电子商务商品自动推荐系统,系统硬件主要由信息采集器、信息储存分析器、商品分析器、商品推荐器四部分组成,通过数据预处理建立分散类,得到目标用户所在区域,计算相似度,实现商品个性化推荐系统软件程序设计。为检测系统效果,设计了对比实验。实验结果表明,无线网络的电子商务商品自动推荐系统能够根据用户喜好推荐有效商品,提高成交量。     

基于隐式数据和Apriori的协同过滤推荐算法

针对传统协同过滤推荐算法对目标客户进行个性化推荐时,因用户评价数据和物品属性等显式数据稀疏,造成推荐商品的准确率和质量相对较差的问题,本文基于隐式数据和Apriori算法对协同过滤推荐算法做出改进.首先,算法基于隐式数据中用户对商品的行为和用户对商品的评价,建立用户对商品的评分偏好模型,用以构建原始评分数据;其次,利用...     

基于大数据的电子商务商品推荐系统研究

随着现代电子商务的不断发展,如何在琳琅满目的商品中给客户推荐针对性的商品,从而提高商品成交率成为当前的思考的重点。本文结合当前的大数据技术,提出一种基于数据挖掘的电子商务推荐系统,并对其实现进行了详细的探讨,从而为当前电子商务的发展提供参考。     

Resolution Enhancement Technology:Integrated Process Solutions using OPC

DUV lithography, using the 248 nm wavelength, is a viable manufacturing option for devices with features at 130 nm and less. Given the low kl value of the lithography, integrated process development is a necessary method for achieving acceptable process latitude. The application of assist features for rule based OPC requires the simultaneous optimization of the mask, illumination optics and the resist.Described in this paper are the details involved in optimizing each of these aspects for line and space imaging.A reference pitch is first chosen to determine how the optics will be set. The ideal sigma setting is determined by a simple geometrically derived expression. The inner and outer machine settings are determined, in turn,with the simulation of a figure of merit. The maximum value of the response surface of this FOM occurs at the optimal sigma settings. Experimental confirmation of this is shown in the paper.Assist features are used to modify the aerial image of the more isolated images on the mask. The effect that the diffraction of the scattering bars (SBs) has on the image intensity distribution is explained. Rules for determining the size and placement of SBs are also given.Resist is optimized for use with off-axis illumination and assist features. A general explanation of the material' s effect is discussed along with the affect on the through-pitch bias. The paper culminates with the showing of the lithographic results from the fully optimized system.     

Cost-effective test solutions for smart card and other integrated flash applications

From its emergence in the late 1980s as a lower cost alternative to early EEPROM technologies, flash memory has evolved to higher densities and speedsand rapidly growing acceptance in mobile applications.In the process, flash memory devices have placed increased test requirements on manufacturers. Today, as flash device test grows in importance in China, manufacturers face growing pressure for reduced cost-oftest, increased throughput and greater return on investment for test equipment. At the same time, the move to integrated flash packages for contactless smart card applications adds a significant further challenge to manufacturers seeking rapid, low-cost test.     

Theoretical analysis of the relationship between the Brillouin gain coefficient and the strain in the optical-fiber sensors

The relation between the power of the Brillouin signal and the strain is one of the bases of the distributed fiber sensors of temperature and strain. The coefficient of the Bfillouin gain can be changed by the temperature and the strain that will affect the power of the Brillouin scattering. The relation between the change of the Brillouin gain coefficient and the strain is thought to be linear by many researchers. However, it is not always linear based on the theoretical analysis and numerical simulation. Therefore, errors will be caused if the relation between the change of the Brillouin gain coefficient and the strain is regarded as to be linear approximately for measuring the temperature and the strain. For this reason, the influence of the parameters on the Brillouin gain coefficient is proposed through theoretical analysis and numerical simulation.     

An improved parallel thinning algorithm with two subiterations

The parallel thinning algorithm with two subiterations is improved in this paper. By analyzing the notions of connected components and passes, a conclusion is drawn that the number of passes and the number of eight-connected components are equal. Then the expression of the number of eight-connected components is obtained which replaces the old one in the algorithm. And a reserving condition is proposed by experiments, which alleviates the excess deletion where a diagonal line and a beeline intersect. The experimental results demonstrate that the thinned curve is almost located in the middle of the original curve connectivelv with single pixel width and the processing speed is high.     

Novel fiber-optical interferometer with miniaturized probe for in-hole measurements

Today, micro-system technology and the development of new MEMS （Micro-Electro-Mechanical Systems） are emerging rapidly. In order for this development to become a success in the long run, measurement systems have to ensure product quality. Most often, MEMS have to be tested by means of functionality or destructive tests. One reason for this is that there are no suitable systems or sensing probes available which can be used for the measurement of quasi inaccessible features like small holes or cavities. We present a measurement system that could be used for these kinds of measurements. The system combines a fiber optical, miniaturized sensing probe with low-coherence interferometry, so that absolute distance measurements with nanometer accuracy are possible.     

Study of waveguide coupling efficiency in hybrid silicon lasers

This paper presents a new method to increase the waveguide coupling efficiency in hybrid silicon lasers. We find that the propagation constant of the InGaAsP emitting layer can be equal to that of the Si resonant layer through improving the design size of the InP waveguide. The coupling power achieves 42% of the total power in the hybrid lasers when the thickness of the bonding layer is 100 nm. Our result is very close to 50% of the total power reported by Intel when the thickness of the thin bonding layer is less than 5 nm. Therefore, our invariable coupling power technique is simpler than Intel＇s.     

Teleportation of an arbitrary unknown N-qubit entangled state under the controlling of M controllers

A new quantum protocol to teleport an arbitrary unknown N-qubit entangled state from a sender to a fixed receiver under M controllers(M < N) is proposed. The quantum resources required are M non-maximally entangled Greenberger-Home-Zeilinger (GHZ) state and N-M non-maximally entangled Einstein-Podolsky-Rosen (EPR) pairs. The sender performs N generalized Bell-state measurements on the 2N particles. Controllers take M single-particle measurement along x-axis, and the receiver needs to introduce one auxiliary two-level particle to extract quantum information probabilistically with the fidelity unit if controllers cooperate with it.     

Diode-end-pumped Nd:YVO4/LBO lasers with 4.2W continuous-wave output at 457 nm

A continuous-wave (CW) 457 nm blue laser operating at the power of 4.2 W is demonstrated by using a fiber coupled laser diode module pumped Nd: YVO4 and using LBO as the intra-cavity SHG crystal With the optimization of laser cavity and crystal parameters, the laser operates at a very high efficiency. When the pumping power is about 31 W, the output at 457nm reaches 4.2 W, and the optical to optical conversion efficiency is about 13.5% accordingly. The stability of the out putpower is better than 1.2% for 8 h continuously working.     

Call for Papers

正Wireless Body-area Networks The last decade has witnessed the convergence of three giant worlds:electronics,computer science and telecommunications.The next decade should follow this convergence in most of our activities with the generalization of sensor networks.In particular with the progress in medicine,people live longer and the aging of population will push the development of wireless personal networks     

Call for Papers—Feature Topic,Vol.12,No.7,2015

正Information Centric Networking Information-Centric Networking(ICN) is an emerging direction in Future Internet architecture research,gaining significant tractions among academia and industry.Aiming to replace the conventional host-to-host communication model by a data-centric model,ICN treats data content as the first