The Effect of Inhomogeneous Phase on the Critical Temperature of Smart Meta-superconductor MgB<Subscript>2</Subscript>

The critical temperature (T_C) of MgB₂, one of the key factors limiting its application, is highly desired to be improved. On the basis of the meta-material structure, we prepared a smart meta-superconductor structure consisting of MgB₂ micro-particles and inhomogeneous phases by an ex situ process. The effect of inhomogeneous phase on the T_C of smart meta-superconductor MgB₂ was investigated. Results showed that the onset temperature (\(T_{\mathrm {C}}^{\text {on}}\)) of doping samples was lower than those of pure MgB₂. However, the offset temperature (\({T}_{\mathrm {C}}^{\text {off}}\)) of the sample doped with Y₂O₃:Eu³⁺ nanosheets with a thickness of 2 ～ 3 nm which is much less than the coherence length of MgB₂ is 1.2 K higher than that of pure MgB₂. The effect of the applied electric field on the T_C of the sample was also studied. Results indicated that with the increase of current, \({T}_{\mathrm {C}}^{\text {on}}\) is slightly increased in the samples doping with different inhomogeneous phases. With increasing current, the \({T}_{\mathrm {C}}^{\text {off}}\) of the samples doped with nonluminous inhomogeneous phases was decreased. However, the \({T}_{\mathrm {C}}^{\text {off}}\) of the luminescent inhomogeneous phase doping samples increased and then decreased with increasing current.     

Surface and grain-boundary energies of cubic zirconia

Using the multiphase equilibration technique for the measurement of contact angles, the surface and grain-boundary energies of polycrystalline cubic ZrO₂ in the temperature range of 1173 to 1523 K were determined. The temperature coefficients of the linear temperature function obtained, are expressed as $$\frac{{{\text{d}}\gamma }}{{{\text{d}}T}}({\text{ZrO}}_{\text{2}} ){\text{ }} = {\text{ }} - 0.431{\text{ }} \times {\text{ }}10^{ - 3} {\text{ }} \pm {\text{ }}0.004{\text{ }} \times {\text{ }}10^{ - 3} {\text{ Jm}}^{ - {\text{2}}} {\text{ K}}^{ - {\text{1}}} $$ and $$\frac{{{\text{d}}\gamma }}{{{\text{d}}T}}({\text{ZrO}}_{\text{2}} - {\text{ZrO}}_{\text{2}} ){\text{ }} = {\text{ }} - 0.392{\text{ }} \times {\text{ }}10^{ - 3} {\text{ }} \pm {\text{ }}0.126{\text{ }} \times {\text{ }}10^{ - 3} {\text{ Jm}}^{ - {\text{2}}} {\text{ K}}^{ - {\text{1}}} $$ respectively. The surface fracture energy obtained with a Vickers microhardness indenter at room temperature is found to be γ _F=3.1 J m^?2.     

Phenomenological Model of Magnetocaloric Effect in La<Subscript>0.7</Subscript>Ca<Subscript>0.2</Subscript>Ba<Subscript>0.1</Subscript>MnO<Subscript>3</Subscript> Manganite Around Room Temperature

In this work, we studied in detail the magnetic and magnetocaloric properties of the La_0.7Ca_0.2Ba_0.1MnO₃ compound according to the phenomenological model. Based on this model, the magnetocaloric parameters such as the maximum of the magnetic entropy change ΔS _M and the relative cooling power (RCP) have been determined from the magnetization data as a function of temperature at several magnetic fields. The theoretical predictions are found to closely agree with the experimental measurements, which make our sample a suitable candidate for refrigeration near room temperature. In addition, field dependences of \({{\Delta } S}_{\mathrm {M}}^{\max }\) and RCP can be expressed by the power laws \({\Delta S}_{\mathrm {M}}^{\max }\approx a\)(μ ₀ H) ⁿ and RCP ≈b(μ ₀ H) ^m , where a and b are coefficients and n and m are the field exponents, respectively. Moreover, phenomenological universal curves of entropy change confirm the second-order phase transition.     

Determination of standard Gibbs energies of formation of ternary oxides in the system Co-Sb-O by solid electrolyte emf method

An isothermal section of the phase diagram of the system Co-Sb-O at 873 K was established by isothermal equilibration and XRD analyses of quenched samples. The following galvanic cells were designed to measure the Gibbs energies of formation of the three ternary oxides namely CoSb₂O₄, Co₇Sb₂O₁₂ and CoSb₂O₆ present in the system.

Crystal structure of the new diamond-like semiconductor CuMn<Subscript>2</Subscript>InSe<Subscript>4</Subscript>

The crystal structure of the semiconductor compound CuMn ₂ InSe ₄ was analysed using X-ray powder diffraction data. CuMn ₂ InSe ₄ crystallizes, with a stannite structure, in the tetragonal space group I\(\boldsymbol {\overline {4}}\)2m (No. 121), Z = 2, with unit cell parameters a = 5.8111(2) Å, c = 11.5739(8) Å and V = 390.84(3) Å ³ . The refinement of 28 instrumental and structural parameters led to R _p = 8.1%, R _{w p} = 10.5%, R _{e x p} = 6.5% and S = 1.6, for 86 independent reflections.     

Luminescence of SrAl<Subscript>2</Subscript>O<Subscript>4</Subscript>:Cr<Superscript>3+</Superscript>

Samples of SrAl₂O₄ and SrAl₂O₄:Cr³⁺ were prepared by mixing the powder materials SrCO₃, Al₂O₃, and Cr₂O₃. The crystal structures of the undoped and doped samples were analyzed by X-ray diffraction (XRD) measurements. The diffraction patterns reveal a dominant phase, characteristic of the monoclinic SrAl₂O₄ compound and another unknown secondary phase, in small amount, for doped samples. The data were fitted using the Rietveld method for structural refinements and lattice parameter constants (a, b, c, and β) were determined. Luminescence of Cr³⁺ ions in this host is investigated for the first time by excitation and emission spectroscopy at room temperature. Emission spectra present a larger band and a smaller structure associated to the and electronic transitions, respectively. The obtained results are analyzed by crystal-field theory and the crystal-field parameter, Dq, and Racah parameters, B and C, are determined from the excitation measurements.     

Magnetocaloric-Transport Properties Correlation in La<Subscript>0.8</Subscript> Ca<Subscript>0.2</Subscript>MnO<Subscript>3</Subscript>-Doped Manganites

This investigation is interested in studying the relation between magnetocaloric effect and transport properties i La_0.8Ca_0.2MnO₃ manganite compound. The value of the magnetocaloric effect has been determined from the calculation of magnetization as a function of temperature under different external magnetic fields. This study also provides an alternative method to determine the magnetocaloric properties such as magnetic entropy change and heat capacity change on the basis of M(T, H) measurements. On the other hand, based on magnetic and resistivity measurements, the magnetocaloric properties of this compound were investigated using an equation of the form \({\Delta } S \,=\, - \alpha {\int \limits _{0}^{H}} {\left [ {\frac {\delta Ln\left (\rho \right )}{\delta T}} \right ]}_{H} dH\), which relates magnetic order to transport behavior of the compounds. As an important result, the values of MCE and the results of calculation are in good agreement with the experimental ones, which indicates the strong correlation between the electric and magnetic properties in manganites.     

Thermoelectric properties of porous n-type {\text{Fe}}_{{\text{0}}{\text{.94}}} {\text{Co}}_{{\text{0}}{\text{.06}}} {\text{Si}}_{\text{2}} compounds prepared by pressureless sintering

The effects of bulk porosity on the thermoelectric properties of porous n-type ${\text{Fe}}_{{\text{0}}{\text{.94}}} {\text{Co}}_{{\text{0}}{\text{.06}}} {\text{Si}}_{\text{2}} $ compounds prepared by pressureless sintering were examined. A small amount of metallic phase ?-FeSi remained after annealing at 800 °C for 100 h. As the sintering temperature increased from 1150 to 1175 °C, the phase transition to β-FeSi₂ during annealing occurred more rapidly. The porous specimen, sintered at 1150 °C for 2 h with coarse powders (<45 μm) and then annealed at 800 °C for 100 h, showed the highest Seebeck coefficient of $ - 363_{\mu } {VK}^{ - {1}} $ at 400 °C and the highest power factor of ${\text{1}}{\text{.57}} \times 10^{ - 3} {\text{Wm}}^{ - 1} {\text{K}}^{ - 2} $ at 400 °C.     

Reaction diffusion in the Nb-Ge system

Reaction diffusion in the Nb-Ge system was studied in the temperature range 1243 to 1723 K for diffusion couples of (pure solid Nb)-(pure liquid Ge) and (pure solid Nb)-(Ge-37.5wt % Nb liquid alloy). Growth of the NbGe₂, Nb₃Ge₂, Nb₅Ge₃ and Nb₃Ge layers was observed, and the growth rates of all except the Nb₃Ge layer were found to conform to the parabolic law. Growth of the Nb₃Ge layer was observed only along the grain boundaries in the Nb₅Ge₃ layer. Interdiffusion coefficients \(\tilde D\) in the NbGe₂, Nb₃Ge₂ and Nb₅Ge₃ phases were determined by Heumann's method, and the temperature dependence of these was expressed by the Arrhenius equations as follows: $$\tilde D_{{\text{NbGe}}_{\text{2}} } = (6.40_{ - 1.66}^{ + 2.25} \times 10^{ - 6} exp [ - (161 \pm 4) kJ mol^{ - 1} {\text{/RT] m}}^{{\text{2 }}} \sec ^{ - 1} $$ $$\tilde D_{{\text{Nb}}_{\text{3}} {\text{Ge}}_{\text{2}} } = (2.27_{ - 0.60}^{ + 0.82} \times 10^{ - 4} exp [ - (282 \pm 4) kJ mol^{ - 1} {\text{/RT] m}}^{{\text{2 }}} \sec ^{ - 1} $$ and $$\tilde D_{{\text{Nb}}_{\text{5}} {\text{Ge}}_{\text{3}} } = (6.28_{ - 1.93}^{ + 2.78} \times 10^{ - 5} exp [ - (238 \pm 5) kJ mol^{ - 1} {\text{/RT] m}}^{{\text{2 }}} \sec ^{ - 1} $$ In addition to the binary Nb-Ge system, the reaction diffusion of (pure solid Nb)-(Cu-13 wt % Ge liquid alloy) couples was also studied. In this case, only growth of the Nb₅Ge₃ layer containing negligible copper content was observed.     

Effect of Zr Addition on Bi<Subscript>1.8</Subscript>Pb<Subscript>0.4</Subscript>Sr<Subscript>2.0</Subscript>Ca<Subscript>1.1</Subscript>Cu<Subscript>2.1</Subscript>O<Subscript><Emphasis Type="Italic">y</Emphasis></Subscript> Superconductor

The polycrystalline Bi_1.8Pb_0.4Sr_2.0Ca_1.1Cu_2.1 M_xO _y , with M = Zr (x = 0.0, 0.02, 0.04), were synthesized by solid-state reaction method and studied by X-ray diffraction analysis (XRD), scanning electron microscopy equipped with energy dispersive of X-ray analysis (SEM/EDX) and resistivity versus temperature measurements. The influence of the Zr addition on the Tc and microstructure properties of the superconducting compounds has been studied. SEM observations show whiskers grains randomly distributed and microstructural change due to the addition of Zr. The ZrO₂ was incorporated into the crystalline structure of BSCCO system in all samples. The crystallographic structure remains in a tetragonal form where a= b≠c. Generally, all samples exhibit semiconductor behaviour above \(T_{\mathrm {c}}^{\text {onset}}\). The onset critical temperature \(T_{\mathrm {c}}^{\text {onset}}\) increases up to 86 with x = 0.02. There is an enhancement in the critical temperature for doped samples as compared with pure Bi_1.8Pb_0.4Sr_2.0Ca_1.1Cu_2.1O _y .Changes in superconducting properties of ZrO₂ nanoparticle added Bi-2212 system were discussed.     

Ab Initio Study of Structural,Electronic, and Magnetic Properties of $\mathrm {A}_{1-x}^{\text {III}}$MnxBVI: In1−xMnxS-Diluted Magnetic Semiconductor

First-principles density functional calculations on the new class of diluted magnetic semiconductor \(A_{1-x}^{III}{Mn}_{x}B^{VI}\) In_1?x Mn _x S for x =?0.25 and 0.5 are investigated to study the structural, electronic, and magnetic properties, employing the full-potential linearized augmented plane wave method. Electronic band structures and density of states revealed a half-metallic character of In_1?x Mn _x S and show the stability of anti-ferromagnetic states as compared with ferromagnetic states. The calculated exchange constants J _dd are in good agreement with experimental and theoretical results on magnetic properties of single crystalline \(\mathrm {A}_{1-x}^{\text {III}}{\text {Mn}}_{x}\mathrm {B}^{\text {VI}}\) in the anti-ferromagnetic case. Our predicated calculations on the s,p-d exchange constants N ₀ α and N ₀ β show that they are lower than in \(\mathrm {A}_{1-x}^{\text {II}}{\text {Mn}}_{x}\mathrm {B}^{\text {VI}}\) DMS. The local environment is found tetrahedral as in the II–VI DMS and other (III,Mn) VI compounds. The total magnetic moment for In_1?x Mn _x S for different concentrations is in accordance with the exact value 5 μ _B and comes mainly from impurity Mn. The local magnetic moments of Mn ions are reduced from their free space charges values due to the p-d hybridization which produces small magnetic moments on the nonmagnetic In and S sites. The Curie temperature of In_1?x Mn _x S is calculated within the mean field approximation and compared with other DMS systems.     

High-field ESR on Light-Induced Transition of Spin Multiplicity in FeCo Complex

Cyanide-bridged Fe-Co complex [Fe(Tp)(CN)₃]₂Co(bpe)?5H₂O (1?5H₂O; Tp = hydro-tris(pyrazolyl)borate; bpe = 1,2-bis(4-pyridyl)ethane) shows temperature- and light- induced metal-to-metal charge transfer (MMCT) involving spin state changes between magnetic $\mathrm{Fe}^{\mathrm{III}}_{\phantom{\mathrm{III}}\mathrm{LS}}\mbox{--}\mathrm{Co}^{\mathrm{II}}_{\phantom{\mathrm{II}}\mathrm{HS}}$ (HS = high spin, LS = low spin) state and nonmagnetic $\mathrm{Fe}^{\mathrm{II}}_{\phantom{\mathrm{II}}\mathrm{LS}}\mbox{--}\mathrm{Co}^{\mathrm{III}}_{\phantom{\mathrm{III}}\mathrm{LS}}$ state, while the dehydrated material 1 does not show any MMCT and holds $\mathrm{Fe}^{\mathrm{III}}_{\phantom{\mathrm{III}}\mathrm{LS}}\mbox{--}\mathrm{Co}^{\mathrm{II}}_{\phantom{\mathrm{II}}\mathrm{HS}}$ state. We have investigated the magnetic properties of each spin state in 1 and 1?5H₂O by means of magnetization and ESR measurement under pulsed high magnetic field. At low temperature below T _N, in both 1 and 1?5H₂O, the saturation magnetization in the induced ferromagnetic phase is well explained by S and g values derived from the magnetic susceptibility study. In the ESR of 1, we observed characteristic modes corresponding to a spin excitation in the induced ferromagnetic phase where its temperature dependence shows an evolution of spin correlation in the $\mathrm{Fe}^{\mathrm{III}}_{\phantom{\mathrm{III}}\mathrm{LS}}\mbox{--}\mathrm{Co}^{\mathrm{II}}_{\phantom{\mathrm{II}}\mathrm{HS}}$ state at low temperature. We further found that the similar ESR modes grow in the light-induced state of 1?5H₂O. The results strongly suggest that the light-induced magnetization in 1?5H₂O is driven by a light-induced MMCT, which involves transition of spin multiplicity from the nonmagnetic $\mathrm{Fe}^{\mathrm{II}}_{\phantom{\mathrm{II}}\mathrm{LS}}\mbox{--}\mathrm{Co}^{\mathrm{III}}_{\phantom{\mathrm{III}}\mathrm{LS}}$ to the magnetic $\mathrm{Fe}^{\mathrm{III}}_{\phantom{\mathrm{III}}\mathrm{LS}}\mbox{--}\mathrm{Co}^{\mathrm{II}}_{\phantom{\mathrm{\mathrm{II}}}\mathrm{HS}}$ pair.     

Three oxidation states and atomic-scale <Emphasis Type="Italic">p–n</Emphasis> junctions in manganese perovskite oxide from hydrothermal systems

Perovskite oxides have provided magical structural models for superconducting and colossal magnetoresistance, and the search for nano-scale and/or atomic-scale devices with particular property by specific preparations in the same systems has been extensively conducted. We present here the three oxidation states of manganese (Mn³⁺, Mn⁴⁺, Mn⁵⁺) in the perovskite oxide, La_0.66Ca_0.29K_0.05MnO₃, which most interestingly shows the rectifying effect as atomic-scale p–n junctions (namely FY-Junctions) of single crystals and films. The family of cubic perovskite oxides were synthesised by the so-called hydrothermal disproportionation reaction of MnO₂ under the condition of strong alkali media. The new concept of the atomic-scale p–n junctions, based on the ideal rectification characteristic of the p–n junctions in the single crystal, basically originates from the structural linkages of [Mn³⁺–O–Mn⁴⁺–O–Mn⁵⁺], where Mn³⁺ and Mn⁵⁺ in octahedral symmetry serve as a donor and an acceptor, respectively, corresponding to the localized Mn⁴⁺ .     

Phase relations in the system Cu-La-O and thermodynamic properties of CuLaO2 and CuLa2O4

Phase relations in the system Cu-La-O at 1200 K have been determined by equilibrating samples of different average composition at 1200 K, and phase analysis of quenched samples using optical microscopy, XRD, SEM and EDX. The equilibration experiments were conducted in evacuated ampoules, and under flowing inert gas and pure oxygen. There is only one stable binary oxide La₂O₃ along the binary La-O, and two oxides Cu₂O and CuO along the binary Cu-O. The Cu-La alloys were found to be in equilibrium with La₂O₃. Two ternary oxides CuLaO₂ and CuLa₂O₄₊ were found to be stable. The value of varies from close to zero at the dissociation partial pressure of oxygen to 0.12 at 0.1 MPa. The ternary oxide CuLaO₂, with copper in monovalent state, coexisted with Cu, Cu₂O, La₂O₃, and/or CuLa₂O₄₊ in different phase fields. The compound CuLa₂O₄₊, with copper in divalent state, equilibrated with Cu₂O, CuO, CuLaO₂, La₂O₃, and/or O₂ gas under different conditions at 1200 K. Thermodynamic properties of the ternary oxides were determined using three solid-state cells based on yttria-stabilized zirconia as the electrolyte in the temperature range from 875 K to 1250 K. The cells essentially measure the oxygen chemical potential in the three-phase fields, Cu + La₂O₃ + CuLaO₂, Cu₂O + CuLaO₂ + CuLa₂O₄ and La₂O₃ + CuLaO₂ + CuLa₂O₄. Although measurements on two cells were sufficient for deriving thermodynamic properties of the two ternary oxides, the third cell was used for independent verification of the derived data. The Gibbs energy of formation of the ternary oxides from their component binary oxides can be represented as a function of temperature by the equations:

Structural properties of nickel manganite Ni x Mn3−x O4 with 0.5 ⩽x ⩽ 1

Single-phase nickel manganite spinels, Ni _x Mn_3–x O₄, with 0.5 x 1, were prepared by a careful thermal processing of nickel-manganese coprecipitated oxalate precursors. Powder X-ray diffraction analysis of the spinel revealed the presence of cubic single spinel phase with parametera which decreases with nickel content. The lattice parameter variation can be explained in terms of the distribution of Ni²⁺ ions on the octahedral sites. Therefore, a fine analysis of data shows that some Ni²⁺ ions (forx>0.56) are located in tetrahedral sites. The percentage of nickel in A-sites increases with nickel content (x) following the relation % Ni²⁺ in A sites =P = – 82.1x ²+192.4x–81.5 and thus the general formula for cation distribution is

Cation distribution investigation of the system Li0.5Fe x Ga2.50-xO4 by X-rays,electrical conductivity and Mossbauer studies

Structural, electrical and Mossbauer studies were carried out for the system Li_0.5Fe _x Ga_2.50-xO₄. All the compounds with 0 ? x? 2.5 crystallised with cubic spinel structure. Lattice constant values calculated from XRD analysis were found to increase with increasing x. X-ray intensity calculations indicated that Li¹⁺ occupies only the octahedral site and Ga³⁺ and Fe³⁺ ions occupy both octahedral and tetrahedral sites. Activation energy and thermoelectric coefficient values decreased with increasing values of x. All the compounds studied were p-type semiconductors and possess low mobility values of 10^?7-10^?9 cm²V^?1 s^?1. Mossbauer data show the presence of iron in the Fe³⁺ state and the isomer shift values for all the compositions of the system are within the range of high spin ferric compounds. The probable ionic configuration for the system is suggested as: $${\text{Ga}}_{{\text{1 - }}\alpha }^{{\text{3 + }}} {\text{Fe}}_\alpha ^{{\text{3 + }}} [Li_{0.5}^1 {\text{Fe}}_{{\text{x - }}\alpha }^{{\text{3 + }}} {\text{Ga}}_{{\text{2}}{\text{.5 - x + }}\alpha }^{\text{3}} ] {\text{O}}_{\text{4}}^{{\text{2 - }}} $$      

Stability and direct conversion of mineral barite crystals in carbonated hydrothermal fluids

The pseudomorphic replacement of mineral barite (BaSO₄) crystals into barium carbonate was investigated in the present work by using carbonated alkaline hydrothermal fluids. Hydrothermal treatments were carried out over the temperature range from 150 up to 250 °C for intervals between 1 and 192 h, with different filling ratios (40–70%), and molar ratios of 1, 5, and 10. The reaction products were characterized by XRD and SEM techniques. The chemical reactivity of mineral barite crystals was markedly limited at temperatures below 200 °C, and only a tiny BaCO₃ layer on the surface of the original BaSO₄ crystal was formed on the crystal treated for 192 h. The rate of the pseudomorphic conversion of BaSO₄ into BaCO₃, was accelerated by increasing the reaction temperature and the molar ratio . Powder X-ray diffraction results showed that under hydrothermal conditions the replacement of ions by ions, in barite crystals was completed at 250 °C with a molar ratio = 10 for an interval of 192 h, resulting in the Witherite structure. The morphology of the completely converted BaCO₃ at 250 °C in a Na₂CO₃ solution for 192 h, showed that the conversion proceed without severe changes of the original shape and dimension of the original crystal, similar to that observed in mineral pseudomorphic replacement process.     

Heat capacity and electrical resistivity of POCO AXM-5Q1 graphite in the range 1500–3000 K by a pulse-heating technique

Measurements of the heat capacity and electrical resistivity of POCO AXM-5Q1 graphite in the temperature range 1500–3000 K by a subsecond-duration pulse-heating technique are described. The results for heat capacity may be represented by the relation $$C_{{\text{p }}} = 19.438 + 3.6215 \times {\text{10}}^{{\text{ - 3}}} {\text{ }}T - 4.4426 \times {\text{10}}^{{\text{ - 7}}} {\text{ }}T^2$$ where C _p is in J · mol^?1 · K^?1 and T is in K. The results for electrical resistivity vary with the density (d) of the specimen material and, therefore, are represented by the following relations: for d=1.709, $$\rho = 1084.6 - 1.9940 \times {\text{10}}^{{\text{ - 1}}} {\text{ }}T + 1.6760 \times {\text{10}}^{{\text{ - 4 }}} T^{2{\text{ }}} - 2.0310 \times {\text{10}}^{{\text{ - 8 }}} T^3$$ and for d= 1.744, $$\rho = 943.1 - 1.3836 \times {\text{10}}^{{\text{ - 1}}} {\text{ }}T + 1.3776 \times {\text{10}}^{{\text{ - 4 }}} T^{2{\text{ }}} - 2.0310 \times {\text{10}}^{{\text{ - 8 }}} T^3$$ where ρ is in μΩ · cm, T is in K, and d (at 20°C) is in g · cm ^?3. The maximum uncertainties in the measured properties are estimated to be 3% for heat capacity and 1 % for electrical resistivity.     

Synthesis and Crystal Structures of New Layered Uranyl Compounds Containing Dimers [(UO<Subscript>2</Subscript>)<Subscript>2</Subscript>O<Subscript>8</Subscript>] of Edge-Linked Pentagonal Bipyramids

Two new U(VI) compounds, [((CH₃)₂CHNH₃)(CH₃NH₃)][(UO₂)₂(CrO₄)₃] (1) and [CH₃NH₃][(UO₂)· (SO₄)(OH)] (2), were prepared by combining hydrothermal synthesis with isothermal evaporation. Compound 1 crystallizes in the monoclinic system, space group Р2₁, a = 9.3335(19), b = 10.641(2), c = 9.436(2) Å, β = 94.040(4)°. Compound 2 crystallizes in the rhombic system, space group Рbca, a = 11.5951(8), b = 9.2848(6), c = 14.5565(9) Å. The structures of the compounds were solved by the direct methods and refined to R₁ = 0.041 [for 5565 reflections with Fo > 4σ(Fo)] and 0.033 [for 1792 reflections with Fo > 4σ(Fo)] for 1 and 2, respectively. Single crystal measurements were performed at 296 and 100 K for 1 and 2, respectively. The crystal structure of 1 is based on [(UO₂)₂(CrO₄)₃]^2– layers, and that of 2, on [(UO₂)(SO₄)(OH)]^– layers. Both kinds of layers are constructed in accordance with a common principle and are topologically similar. Protonated isopropylamine and methylamine molecules are arranged between the layers in 1, and protonated methylamine molecules, in 2. Compound 1 is the second known example of a U(VI) compound templated with two different organic molecules simultaneously.