Water-in-diesel fuel nanoemulsions: Preparation,stability and physical properties

In this work, water-in-diesel fuel nanoemulsions were prepared with mixed nonionic surfactants. Several mixtures of sorbitan monooleate and polyoxyethylene (20) sorbitan monooleate, with different Hydrophilic–Lipophilic Balance (HLB) values (9.6, 9.8, 10, 10.2 and 10.4) were prepared to achieve the optimal HLB value. Three mixed surfactant concentrations were prepared at 6%, 8% and 10% to identify the optimum concentration. Five emulsions with different water contents: 5%, 6%, 7%, 8% and 9% (wt./wt.) were prepared using high energy method at the optimum conditions (HLB = 10 and mixed surfactant concentration = 10%). The effect of HLB value, mixed surfactant concentration and water content on the droplet size has been studied. The interfacial tension and thermodynamic properties of the individual and the blended emulsifiers were investigated. Droplet size of the prepared nanoemulsions was determined by dynamic light scattering and the nanoemulsion stability was assessed by measuring the variation of the droplet size as a function of time. From the obtained results, it was found that the mean droplet sizes were formed between 49.55 and 104.4 nm depending on HLB value, surfactant concentration and water content of the blended emulsifiers. The physical properties, kinematic viscosity and density, of the prepared nanoemulsions and the effect of different temperatures on these properties were measured.     

Prevalence of virulence genes in Escherichia coli isolated from food in Casablanca (Morocco)

This study was undertaken to determine the frequency of potentially pathogenic Escherichia coli (E. coli) strains among E. coli isolated from Casablanca, Morocco. The E. coli strains were isolated from ground beef (n = 140), turkey (n = 200), sausage (n = 120), seafood (n = 60), domestic water (n = 35) and well water (n = 50). The prevalence of E. coli was 48%, 45%, 35.5%, 30%, 8.3%, 0%, for well water, ground beef, turkey, sausage, sea food and domestic water, respectively. Two hundreds E. coli isolates were tested for the presence of 17 virulence genes associated with strains causing intestinal and extra-intestinal infections. The virulence genes included stx1, stx2, lt, st, hlyA, aggA, saa, astA, iucD, cnf1, eaeA, bfpA, ial, ipaH, afa, pap and sfa. PCR showed that 37% (74) of E. coli isolates carried one or more of these virulence genes. No virulence genes were found in E. coli strains isolated from sea food samples. In contrast, 10% of the ground beef samples, 18% of the turkey samples, 17.5% of sausage samples and 6% of well water contained specific factors for intestinal E. coli pathogens.     

Low IFT gas–oil gravity drainage in fractured carbonate porous media

This paper addresses a study of gas–oil gravity drainage in fractured carbonate rock subjected to gas injection in low interfacial tension. The purpose of the experiments described in the paper was to investigate gas injection in fractured carbonate reservoirs in both secondary and tertiary cases (after water injection), focusing on gravity drainage using equilibrium gas followed by re-pressurization. Gas injection experiments were performed on 20 cm long and low permeable outcrop chalk core surrounded with a fracture established with a novel experimental set-up in reservoir conditions. The core was saturated with binary mixture live oil consisting of C₁ and C₇ of a known composition, while the fracture was filled with sealing material to obtain a homogeneous saturation. After core initialization, the sealing material was removed by increasing the temperature to higher than its melting point and displaced by live oil. Gas was then injected into the fracture and gravity drainage experiments were performed in low interfacial tension (< 0.5 mN/m) where the IFT between the phases were measured experimentally by selecting the proper pressure and temperature.Experiments were performed at different pressures and reversibility of the effect of the interfacial tension was checked by re-pressurization process. The oil recovered from the bottom side of the block was measured versus time.Based on the results of this study, the recovery of oil showed a significant increase by re-pressurization in gravity drainage process. It was also clear that low IFT gravity drainage is capable to recover a significant amount of oil in fractured reservoirs even after water injection.     

Production of biosurfactant from Bacillus licheniformis for microbial enhanced oil recovery and inhibition the growth of sulfate reducing bacteria

In this study, the bacterium Bacillus licheniformis has been isolated from oil reservoir; the ability of this bacterium to produce a biosurfactant was detected. Surface properties of the produced biosurfactant were confirmed by determining the emulsification power as well as surface and interfacial tension. The crude biosurfactant has been extracted from supernatant culture growth, and the yield of crude biosurfactant was about 1 g/l. Also, chemical structure of the produced biosurfactant was confirmed using FTIR analysis. Results revealed that, the emulsification power has been increased up to 96% and the surface tension decreased from 72 of distilled water to 36 mN/m after 72 h of incubation. The potential application of this bacterial species in microbial-enhanced oil recovery (MEOR) was investigated. The percent of oil recovery was 16.6% upon application in a sand pack column designed to stimulate an oil recovery. It also showed antimicrobial activity against the growth of different strains of SRB (sulfate reducing bacteria). Results revealed that a complete inhibition of SRB growth using 1.0% crude biosurfactant is achieved after 3 h.     

Synthesis and evaluation of some new demulsifiers based on bisphenols for treating water-in-crude oil emulsions

The present paper endeavors to synthesize nine types of demulsifiers based on bisphenols (bisphenol A (BA), bisphenol AC (BAC) and bisphenol CH (BCH)) having different ethylene oxide units (n = 27, 34, 45) namely; E (x + y) (where E represents BA, BCH or BAC and (x + y) which represents the ethylene oxide units (27, 34, 45)). The chemical structures of the prepared demulsifier were elucidated using FT-IR and ¹H NMR spectra. Effect of the chemical structure (hydrophobic and ethoxylated degree of hydrophilic parts) and the mechanism of demulsification process was investigated. The data were discussed on the light of the chemical structure of the demulsifiers and the factors, effecting the demulsification process. The efficiency of these demulsifiers was tested on water-in-oil emulsions (w/o) at different concentrations (100, 200 and 300 ppm), 7.4% asphaltene content and 30%, 50% and 70% water content. From the obtained data the best demulsifier was E(34)BA which shows 100% demulsification after 58 min at 30% water content and 300 ppm of the demulsifier.     

Sanitization potency of slightly acidic electrolyzed water against pure cultures of Escherichia coli and Staphylococcus aureus,in comparison with that of other food sanitizers

The sanitization potency of slightly acidic electrolyzed water (SAEW) on pure cultures of Staphylococcus aureus (S. aureus) and Escherichia coli (E. coli) was evaluated. The potency was compared with that of strong acidic electrolyzed water (StAEW) and sodium hypochlorite (NaOCl) solution. SAEW (ca. pH 5.8 and 21 mg/l available chlorine concentration; ACC) resulted into >5 log₁₀CFU/ml reduction of E. coli and S. aureus after 90 s of exposure. The relative bacterial reduction potency at each exposure time was in the order StAEW > NaOCl > SAEW and increased with exposure time, with relative effect being 90 s > 60 s > 30 s. The results indicate that SAEW with low ACC and near neutral pH can potentially sanitize E. coli and S. aureus within a short period of exposure presenting a potential replacement to NaOCl solution commonly used in the food industry.     

Selection of Pseudomonas aeruginosa for biosurfactant production and studies of its antimicrobial activity

Biosurfactants are generally microbial metabolites with the typical amphiphilic structure of a surfactant. This study investigated potential biosurfactants production of Pseudomonas aeruginosa ATCC-10145 and Bacillus subtilis NCTC-1040 using glucose and n-hexadecane as substrates separately and compared it with the production in conventional medium. Pseudomonas aeruginosa growing in BHMS (Bushnell hass mineral salt) medium with glucose as substrate decreased the surface tension from 72 of distilled water to 32 mN/m, this strain had higher reduction than Bacillus subtilis among all the substrates tested. The selection of Pseudomonas aeruginosa for the separation of biosurfactant was determined. The crude biosurfactant was extracted from the supernatant and the yield of the crude biosurfactant was about 1 g/l. Some surface properties of rhamnolipids biosurfactant were evaluated. It also showed antimicrobial activity against different bacteria and fungi strains. The crude biosurfactant showed good action as antimicrobial activity against different bacterial and fungal species.     

Behavior of Salmonella Rubislaw on ground black pepper (Piper nigrum L.)

Among spices, black pepper is highly appreciated and Brazil is one of the largest producers of it in the world. However, spices may reach consumers presenting poor quality, due to the loss of volatile compounds, microbial contamination or even due to insect infestation. Salmonella spp. frequently contaminate ground black pepper and may be recovered from products with low levels of free water, even after they have been submitted to high temperatures. The objective of this trial was to evaluate the behavior of a Salmonella Rubislaw strain on ground black pepper (Piper Nigrum L.), as well as to study the effects of water activity (A_w) and storage temperature (5, 25 and 35 °C) for 2 and 15 days. The most probable number technique was used for the quantification of the S. Rubislaw. Data obtained in the present trial indicate that differences in the reduction in counts were observed in relation to A_w (P = 0.006) and storage temperature (P = 0.000). Nevertheless, there was no significance as to the interaction of the two factors (P’s > 0.05). Bonferroni multiple comparisons tests have shown significant differences only when related to the A_w: 0.663, 0.815 and 0.887 (P’s < 0.05). When the product is stored at 5 °C, the number of surviving cells is even greater (P = 0.000). Considering the data obtained, we may conclude that, after contamination, S. Rubislaw remains viable in pepper for up to 15 days.     

Effect of organic acids,hydrogen peroxide and mild heat on inactivation of Escherichia coli O157:H7 on baby spinach

Minimally processed baby spinach contaminated with Escherichia coli O157:H7 has been associated with multiple outbreaks of foodborne illnesses recently. Chlorinated water is widely used to wash vegetables commercially, but this washing procedure has limited efficacy and can lead to the formation of carcinogenic substances. This study was conducted to determine the effects of organic acids and hydrogen peroxide alone and in binary combinations with or without mild heat (40 and 50 °C) on the inactivation of Escherichia coli O157:H7 on baby spinach. Baby spinach leaves were dip-inoculated with E. coli O157:H7 to a level of 6 log CFU/g and stored at 4 °C for 24 h before treatment. Individual washing solutions (1% and 2% lactic acid [LA], citric acid [CA], malic acid [MA], tartaric acid [TA], acetic acid [AA], hydrogen peroxide [H₂O₂] as well as binary combinations of LA, CA, MA and H₂O₂ at final concentrations of 1% were used to decontaminate spinach leaves at 22, 40 or 50 °C for 2–5 min to test their efficacy in reducing E. coli O157:H7. Chlorinated water (200 ppm free chlorine) decreased the population of E. coli O157:H7 on baby spinach by only 1.2–1.6 log CFU/g, which was not significantly different from DI water washing. Washing with 1% LA at 40 °C for 5 min was the most effective treatment achieving a 2.7 log reduction of E. coli O157:H7 which is significantly higher than chlorine washing. Washing with LA + CA or LA + HP at 40 °C for 5 min was equally effective against E. coli O157:H7, resulting in a 2.7 log reduction of E. coli O157:H7. The application of mild heat significantly enhanced the efficacy of washing solutions on the inactivation of E. coli O157:H7. There was, however, no significant difference between treatments at 40 °C for 5 min and 50 °C for 2 min. The results suggested that the use of organic acids in combination with mild heat can be a potential intervention to control E. coli O157:H7 on spinach.     

Non-thermal inactivation of Escherichia coli K12 in buffered peptone water using a pilot-plant scale supercritical carbon dioxide system with a gas–liquid porous metal contactor

This study evaluated the effectiveness of a supercritical carbon dioxide (SCCO₂) system, with a gas–liquid porous metal contactor, for reducing Escherichia coli K12 in diluted buffered peptone water. 0.1% (w/v) buffered peptone water inoculated with E. coli K12 was processed using the SCCO₂ system at CO₂ concentrations of 3.1–9.5 wt%, outlet temperatures of 34, 38, and 42 °C, a system pressure of 7.6 MPa, and a flow rate of 1 L/min. Increased CO₂ concentrations and temperatures significantly (P < 0.05) enhanced microbial reduction. A maximum reduction of 5.8-log was obtained at 8.2% CO₂ and 42 °C. To achieve a 5-log reduction of E. coli K12 in 0.1% buffered peptone water, minimum CO₂ concentrations of 9.5%, 5.5%, and 5.3% were needed at 34, 38, and 42 °C, respectively. Further reductions of cells were observed after storage for 7 days at 4 °C. But storage at 25 °C increased the number of viable cells to 8-log cfu/mL after 7 days. This study showed the potential of the pilot scale SCCO₂ system with a gas–liquid porous metal contactor for microbial inactivation in liquid food.     

Occurrence of diacetoxyscirpenol (anguidine) in processed cereals and pulses in Turkey by HPLC

The purpose of this study was to investigate the diacetoxyscirpenol (DAS, anguidine) level of contaminated cereal and pulse products in Turkey. DAS was detected using high performance liquid chromatography (HPLC) with diode array detector (DAD) at 205 nm and suspicious the results for two specimens suspected to contain DAS were confirmed by gas chromatography–mass spectrometry (GC–MS). An acetonitrile–water (21 + 4, v/v) extract of the sample was cleaned up on a column packed with alumina/charcoal (0.35 g + 0.40 g). The minimum detectable amount of DAS was 16 ng/injection, limit of detection was 0.8 μg/g for HPLC. A total of 85 commercially available cereal and pulse product samples, collected from markets and street bazaars, were analyzed. The recoveries for corn flour with the known amounts of DAS (2, 3, 4 μg/g) were 85.3% (SD 4.81, n = 5), 98.1% (SD 12.6, n = 5) and 96.4% (SD 3.2, n = 5), respectively. DAS was detected in none of the cereal and pulse products.     

Inactivation of a non-pathogenic strain of E. coli by ionising radiation

Ionising radiation is an effective method to reduce pathogenic E. coli O157:H7 in meat and poultry products. Radiation sensitivity of bacteria, however, depends on several factors. After applying an irradiation dose of 1 kGy to cultures of the non-pathogenic strain of E. coli, DSM 498, grown and irradiated in nutrient broth, reductions of 3–4 decimal units were achieved (D₁₀ = 0.27 kGy). If grown on minced turkey meat, however, reduction rates were lower (D₁₀ = 0.47 kGy). Even lower reduction rates were obtained during irradiation of frozen meat (D₁₀ = 0.72 kGy) compared to treatments at cooling temperatures (D₁₀ = 0.48 kGy). For data evaluation, both, first order reduction kinetics and the Weibull model were compared. The results emphasise the necessity to determine inactivation kinetics in food matrices of target extrinsic factors (e.g. temperature).     

High hydrostatic pressure treatment applied to model cheeses made from cow’s milk inoculated with Staphylococcus aureus

Pasteurized milk was inoculated with two strains of Staphylococcus aureus (CECT4013 or ATCC13565) and used to elaborate soft-curd cheeses with approximately 7.5-log CFU/g of S. aureus. Cheeses were submitted to 10 min high hydrostatic pressure (HHP) treatments of 300, 400 or 500 MPa at 5 °C or 20 °C. Staphylococcus enterotoxin (SE) was evaluated in cheeses containing ATCC13565. Counts of S. aureus were measured after HHP treatment (day 1) and after 2, 15 and 30 days ripening at 8 °C. Inactivation increased with pressure and storage time, but was similar for both treatment temperatures. Maximum S. aureus reductions were achieved after 30 days ripening for samples treated at 500 MPa and 5 °C: 6.0 ± 0.1 and 4.7 ± 0.5-log CFU/g for CECT4013 and ATCC13565, respectively. However, SE was detected in all cheese samples containing ATCC13565 before and after HHP and after 30 days ripening.     

Occurrence and infection dynamics of anisakid larvae in Scomber scombrus,Trachurus trachurus,Sardina pilchardus,and Engraulis encrasicolus from Tarragona (NE Spain)

Between February 1996 and January 2000, parasitological examination of Scomber scombrus (n = 447), Trachurus trachurus (n = 175), Sardina pilchardus (n = 160) and Engraulis encrasicolus (n = 153) from the fishing-ground of Tarragona (NE Spain) were made for anisakids. Three anisakid species (Anisakis larva type I sensu Berland, 1961, Contracaecum sp. and Hysterothylacium aduncum) were morphologically identified. The prevalence of Anisakis larva type I sensu Berland (1961) ranged from 11.0% (S. scombrus) and 2.6% (T. trachurus) to 0.0% (S. pilchardus and E. encrasicolus). The prevalence of H. aduncum in S. scombrus was 1.1%. The prevalence of Contracaecum sp. was 2.0% in S. scombrus, and 0.7% in T. trachurus respectively. There was a positive and significant correlation between the host length and the number of Anisakis larva type I sensu Berland, 1961 found in S. scombrus.     

Importance and efficiency of in-depth antimicrobial activity for the control of listeria development with nisin-incorporated sodium caseinate films

The effect of antimicrobial sodium caseinate-based films was investigated on inhibition of Listeria innocua in cheese. Nisin was incorporated into sorbitol-plasticized sodium caseinate films at 1000 IU/cm² and the films were prepared by casting methods. Mini red Babybel® cheese was chosen as a semi-soft cheese model. The antimicrobial activity was studied based on the contact between antimicrobial films and surface-contaminated as well as in-depth contaminated cheese samples during a 7-day storage at 4 °C. The active films produced resulted in a reduction of 1.1 log CFU/g reduction in L. innocua counts in surface-inoculated cheese samples after 1 week of storage as compared to control samples. Regarding in-depth inoculated cheese samples, antimicrobial effectiveness was found to be dependent on the distance from the contact surface with the films containing nisin to the cheese matrix. The inactivation rates obtained were 1.1, 0.9 and 0.25 log CFU/g with slice 1 (distance from contact surface d = 1 mm), slice 2 (d = 2 mm) and slice 3 (d = 3 mm), respectively. Our study demonstrates the potential application of antimicrobial films as a promising method to overcome problems associated with post-process contamination, thus enhancing the safety and extending the shelf life of food products.     

Effects of lactic acid and lauricidin on the survival of Listeria monocytogenes,Salmonella enteritidis and Escherichia coli O157:H7 in chicken breast stored at 4 °C

Lauricidin and lactic acid were evaluated for their effects on growth and survival of Listeria monocytogenes (L55), Salmonella enteritidis (S552) and Escherichia coli O157:H7 (E19) inoculated onto raw chicken breast. Fresh, raw chicken breasts were purchased immediately after slaughter and transported on ice to the laboratory within 20 min. Each chicken breast was decontaminated by briefly dipping in 70% ethanol and passed through a flame of a Bunsen burner and then allowed to cool. The decontaminated Chicken breast was dipped in TSB broth, at room temperature (25 °C) for 15 min, containing approximately log 9 CFU/ml of L. monocytogenes, S. enteritidis or E. coli O157:H7. Initial counts of L. monocytogenes, S. enteritidis or E. coli O157:H7 counts in chicken breast immediately after dipping in TSB broth were in the range of log 7–log 8 CFU/g. After inoculation, the chicken breasts were kept at room temperature for 20 min to allow attachment. Each inoculated chicken breast (25 °C) was dipped in 0 (control – sterile water), 0.5%, 1%, 1.5% or 2% of lauricidin (w/v) or lactic acid (v/v) for 10, 20 or 30 min and then individually placed in oxygen-permeable polyethylene bags. Breasts were subjected to microbiological analyses after treatment (day 0) and after storage for 2, 5, 7, 10 and 14 d at 4 °C. Initial counts of L. monocytogenes, S. enteritidis and E. coli O157:H7, in chicken breast treated with lauricidin decreased by 2.90, 1.31 and 2.27 log CFU/g, respectively. Lauricidin was more effective in reducing L. monocytogenes population than S. enteritidis and E. coli O157:H7 population. Dipping chicken breast in lauricidin for 30 min caused a significant reduction of L. monocytogenes, S. enteritidis and E. coli O157:H7 population compared to 10 and 20 min dipping. Initial L. monocytogenes, S. enteritidis and E. coli O157:H7 counts on chicken breast treated with lactic acid decreased by 1.97, 1.71 and 2.59 log CFU/g, respectively. Lactic acid caused a higher reduction in initial S. enteritidis and E. coli O157:H7 counts compared to lauricidin.     

Prevalence of foodborne pathogens in open markets and supermarkets in Thailand

This study was conducted in Thailand (Bangkok and Pathum Thani provinces), from June 2006 to July 2007, in order to assess the prevalence of Listeria monocytogenes, Escherichia coli O157, Salmonella, Shigella and Vibrio parahaemolyticus in foods. Retail raw meats and seafood, including chicken (n = 109), pork (n = 80), beef (n = 108), shrimp (n = 43) and oysters (n = 48), from open markets and supermarkets were analyzed. Salmonella was found in 22 of 61 (36%) open market samples (48% of chicken, none of pork and beef, and 53% of shrimp) and in 12 of 75 (16%) samples from supermarkets (57%, 12%, 24%, 0% respectively). However, a small number of L. monocytogenes were isolated, where 6 of 217 (3%) were samples from open markets (6% of chicken and 3% of pork) and 17 of 171 (10%) were from supermarkets (3% of beef, 4% of chicken, and 32% of pork). In both markets, L. monocytogenes was not detected from shrimps, neither from oysters. E. coli O157, Shigella and tdh-positive V. parahaemolyticus were not isolated in this collection. Several Salmonella and L. monocytogenes isolates were multidrug-resistant. Both markets would need better assessment, since multidrug-resistant strains have been isolated and they may lead to therapeutic failure.     

Direct conversion of natural gas into COx-free hydrogen and MWCNTs over commercial Ni–Mo/Al2O3 catalyst: Effect of reaction parameters

A commercial hydrotreating nickel molybdate/alumina catalyst was used for the direct conversion of natural gas (NG) into CO_x-free hydrogen and a co-valuable product of multi-walled carbon nanotubes (MWCNTs). The catalytic runs were carried out atmospherically in a fixed-bed flow reactor. The effect of reaction temperature between 600 and 800 °C, and dilution of the NG feed with nitrogen as well as pretreatment of the catalyst with hydrogen were investigated. At a reaction temperature of 700 °C and dilution ratio of NG/N₂ = 20/30, the optimum yield of H₂ (～80%) was obtained with higher longevity. However, using the feed ratio of NG/N₂ = 30/20, the optimum yield of MWCNTs was obtained (669%). X-ray diffraction pattern for the catalyst after the reaction showed that the MWCNTs were grown on the catalyst at all reaction temperatures under study. TEM pictures revealed that the as-grown MWCNTs at 600, 650 and 800 °C are short and long with a low graphitization degree. At 700 °C a forest of condensed CNTs is formed, whereas both carbon nanofibers and CNTs were formed at 750 °C.     

Assessment of benzoic acid levels in milk in China

Benzoic acid is the most commonly used preservative in foodstuffs. Although benzoic acid is generally recognized as safe (GRAS), adverse effects such as asthma, urticaria, metabolic acidosis and convulsions were observed at low doses in sensitive persons. Some weak clastogenic activity was noted in in vitro assays. The aim of our study was to determine the levels of benzoic acid in milk samples consumed in the city of Guangzhou, China. In this study, 142 samples of pasteurized milk (24), ultra high temperature milk (UHT, n = 45), milk powder (n = 31) and infant formula (n = 42) were analyzed by high performance liquid chromatograph (HPLC) with diode array detector (DAD) from October 2006 to January 2007. Benzoic acid was detected in 109 (76.8%) samples, ranging from 0.51 to 111 mg/kg. The LOD for benzoic acid was, respectively, 0.2 mg/kg in pasteurized and UHT milk, 2 mg/kg in milk powder and infant formula. The mean recoveries of spiked samples at 4 levels were 99.5 ± 3.1% in liquid milk, and 98.5 ± 4.3% in milk powder, respectively. The results show that benzoic acid widely occurs in milk and milk products in China at the low levels. The levels found are not high, and should not affect the general public; however, it may affect the infants and/or sensitive persons. Therefore, it is important to assess the levels of benzoic acid in milk in China. Meanwhile, it should be noted that the lowest percentage of positive samples in pasteurized milk probably results from the difference in the quality of raw milk, processing technical and storage condition of milk products.     

Detection of radiation-induced markers from parts of irradiated kiwifruits

Parts of irradiated kiwifruits were investigated for radiation-induced markers. The DNA comet assay on seeds showed that non-irradiated cells appeared as intact nuclei without tails, while irradiated cells displayed comets with long tails. Tail length of seeds increased significantly up to 1 kGy (p < 0.05), showing a positive correlation (R² = 0.9084) between the irradiation dose and tail length. The triplet signals from cellulose radicals observed in electron spin resonance (ESR) analysis on the core or flesh of kiwi enabled irradiated samples to be distinguished from the non-irradiated samples. The ESR signals increased in correlation with the irradiation doses with R² = 0.9071 in the core and R² = 0.9730 in flesh. Both methods were found suitable for the detection of irradiated kiwi during the six-week shelf-life period.