共查询到20条相似文献,搜索用时 15 毫秒
1.
The aim of this paper is to optimize the energy performance of cylindrical cross section evaporative wind towers as passive systems for thermal conditioning of urban spaces. Two theoretical models, a thermal model and a fluid model, have been developed to characterize the evaporative system and the tower design respectively. The thermal model evaluates the tower operation when the fan and the nozzles are working, giving as result the difference between the outlet temperature and inlet temperature. This model has been used to analyze the thermal response of the system to fluctuations in design parameters (water flow, air flow and absorption coefficient of the plastic). To that effect, three one-parametric and one multi-parametric optimization have been done. The fluid model describes the tower operation when the fan and the nozzles are not working, giving as result the wind behavior through the tower. Additional configurations of the wind tower have been evaluated: changing the number of the wind catcher openings, varying the height of the internal walls of the tower and modifying the geometry of the lower ventilation apertures. 相似文献
2.
Wind towers for passive evaporative cooling offer real opportunity for improving the ambient comfort conditions in building whilst reducing the energy consumption of air-conditioning systems.This study aims at assessing the thermal performance of a bioclimatic housing using wind towers realized in a hot dry region of Algeria. Performance monitoring and site measurement of the system provide data which assist model validation. The analysis and site measurement are encouraging, and they confirm the advantage of the application of this passive cooling strategies in hot dry climate.A mathematical model is developed using heat and mass transfer balances. For a more effective evaporative cooling, a number of improvements on wind tower configurations are proposed. 相似文献
3.
In the present work, a dry cooling tower and a solar chimney design are recombined in order to increase the thermal efficiency of a steam Rankine cycle. The rejected heat from the condenser into the dry cooling tower supplemented by the solar radiation gained through its transparent cover are the sources of wind energy generation that is captured by a wind turbine which is located at the beginning of the chimney. In this research a case study for a 250 MW steam power plant of Shahid Rajaee in Iran has been performed. A CFD finite volume code is developed to find the generated wind velocity at the turbine entrance for a 250 m dry cooling tower base diameter and a chimney height of 200 m. Calculations have been iterated for different ambient temperatures and solar irradiances, representing temperature gradient within day length. A range of 360 kW to 3 MW power is obtained for the change in the chimney diameter from 10 to 50 m. The results show a maximum of 0.37 percent increase in the thermal efficiency of a 250 MW fossil fuel power plant unit; which proves this design to be a significant improvement in efficiency of thermal power plants, by capturing the heat that is dissipated from dry cooling towers. 相似文献
4.
In this study, an innovative, evaporative condenser for residential refrigerator was introduced. A vapor compression cycle incorporating the proposed evaporative condenser was tested to evaluate the cycle performance. To allow for evaporative cooling, sheets of cloth were wrapped around condenser to suck the water from a water basin by capillary effect. The thermal properties at the different points of the refrigeration cycle were measured for typical operating conditions. The experimental results showed that the condenser temperature increases 0.45 °C for each degree increase in evaporator temperature when the air velocity is 2.5 m/s, and the ambient condition is 29 °C and the relative humidity is 37.5%. Meanwhile, the condenser temperature increase is 0.88 °C in the case of air velocity 1.1 m/s and ambient conditions of 31 °C and relative humidity of 47.1%. A theoretical model for the evaporative condenser was developed, and validated by experimental results. The theoretical model showed that the evaporative condenser can operate at a condensing temperature of 20 C lower than that of the air-cooled condenser for heat flux of 150 W/m2, and at air velocity 3 m/s. The effect of the different parameters on the condenser temperature was studied too. 相似文献
5.
Experimental study of effect of an inner thermal curtain in evaporative cooling system of a cascade greenhouse 总被引:3,自引:0,他引:3
In this paper experimental study has been carried out in a cascade greenhouse with inner thermal curtain to see the effect of thermal curtain. A thermal model has also been developed to predict the air temperature in a cascade greenhouse. The fan-pad system has been used for evaporative cooling and an inner thermal curtain has been used to divide the greenhouse in two zones. Experiments have been conducted in hot summer conditions at Solar Energy Park, IIT Delhi, New Delhi, India for empty greenhouse. Statistical analysis has been carried out to validate the agreement of experimental observations with predicted values. The values of the root mean square percent deviation and coefficient of correlation has been found out 9.0%, 0.90; 5.0%, 0.95 and 7.0%, 0.97 for April, May and June in case of evaporative cooling without curtain in greenhouse-2. The degree of freedom for the experimental work is 10.0. It is found that the use of evaporative cooling with a thermal curtain reduces the temperature of greenhouse by 5 °C and 8 °C in the second zone of greenhouse-1 and 2 in comparison to greenhouse without curtain in May. 相似文献
6.
Two new designs of wind towers were tested side by side with a conventional wind tower in the city of Yazd, Iran. All the towers were of identical dimensions. The two new designs were one with wetted column, consisting of wetted curtains hung in the tower column, and the other one with wetted surfaces, consisting of wetted evaporative cooling pads mounted at its entrance. The air temperature leaving the wind towers with evaporative cooling provisions were much lower than the air temperature leaving the conventional design, and its relative humidity much higher. The air-flow rate was reduced slightly in these new towers. It was found that the wind tower with wetted column performs better with high wind speeds whereas the tower with wetted surfaces performs better with low wind speeds. It is recommended that these new designs of wind towers should be manufactured in different sizes and incorporated in the designs of new buildings. They can replace the evaporative coolers currently employed in Iran, and other hot arid regions, with considerable saving in electrical energy consumption. 相似文献
7.
Mehdi N. Bahadori 《Renewable Energy》1994,5(5-8)
Operation of conventional wind towers, or Baud-Geers, are described. Wind towers maintain natural ventilation through buildings due to wind or buoyancy effects. The tower structure is cooled externally through radiative transfer with the sky, and internally with the cool ambient air, circulated through the building and the tower during the night. During the day, the warm ambient air is partially cooled by the tower structure before entering the building. When passed over moist surfaces, air is cooled evaporatively. However, sensible and evaporative cooling potentials of conventional wind towers, which depend on the tower design, are limited. Another disadvantage of the conventional wind towers is the admittance of dust into the building.Two modern designs of wind towers are considered which eliminate the above disadvantages. One design incorporates one-way dampers in the tower head and a wetted column in the tower. This design, which is particularly suitable in areas with good winds, evaporatively cools the hot-dry ambient air before admitting it into the building. The other design incorporates evaporative cooling pads at the tower entrance. This design is particularly suitable in areas with very little or no winds.This latter design may be incorporated into the existing minarets of the mosques and shrines, church towers, or other existing tall towers, to supply evaporatively-cooled air into the space.Conventional and the modern versions of wind towers can be incorporated aesthetically into the designs of modern buildings in the hot-arid regions of the Middle East, and other areas of the world with similar climate, to provide summer thermal comfort with little or no use of electricity. 相似文献
8.
Qinguo Zhang Liangfei Xu Jianqiu Li Minggao Ouyang 《International Journal of Hydrogen Energy》2018,43(3):1736-1748
The cooling system of proton exchange membrane fuel cell (PEMFC) engine was simulated by 1D and 3D collaborative simulation method. Firstly, the resistance characteristics of the flow channel are obtained by simulating the airside flow model. A three-dimensional simulation model including dual fans and radiator is also established to simulate the airflow distribution. The one-dimensional simulation model of 30 kW PEMFC engine cooling system that are mainly composed of a thermostat, water pump, and fan and radiator model is established. Secondly, the heat dissipation performance of the cooling system is calculated by using the coupled simulation model. It is found that the simulation results of the amount of heat transferred are in good agreement with the experimental data by compromising, which proves that the model is reasonable. Finally, the thermal performance of the extreme operating conditions of the PEMFC system is simulated by means of a simulation model. By monitoring the flow of the pump and the fan speed, we can maintain the stack internal heat balances, so that the stack efficient and stable operation. The results demonstrate that the 3D simulation can get the distribution of fluid flow more accurately, while the simulation time of 1D thermal system is short and can guide the matching of heat transfer parts quickly. 相似文献
9.
Chih-Chung Chang Yu-Fu Kuo Jung-Chang Wang Sih-Li Chen 《Applied Thermal Engineering》2010,30(11-12):1360-1368
This article experimentally and numerically investigates the thermal performance of a large-scale motor with a capacity of 2350 kW. The large-scale motor consists of a centrifugal fan, two axial fans, a shaft, a stator, a rotor and a heat exchanger with 637 cooling tubes. The test rigs are set up to measure the performance of the fans and the temperature distributions of the motor. The models of the fan and motor have been implemented in a Fluent software package to predict the flow and temperature fields inside the motor. The calculated results show good agreement with the measured data. In order to improve the motor thermal performance, several methods have been adopted, which are aiming to enhance the fan performance by changing the geometry, to redesign a new heat exchanger with guide vanes, and to optimize the distance between the axial fans. The modified design can decrease the temperature rise by 6 °C in both the stator and rotor. 相似文献
10.
Computer simulation and analysis of a ground source heat pump system with horizontal ground heat exchangers operating in heating (max 5.5 kW) and cooling (max 3.3 kW) mode was carried out for a typical residential house, with 200 m2 of living space, located in Sapporo (Japan). In spite of high electricity rate, the ground source heat pump system is more beneficial alternative for space heating than an oil furnace and an electric resistance system. Besides, the heat pump technology offers relatively low thermal degradation of the ground environment, lower cost of heating and cooling, higher operating efficiency than electric resistance heating or air-source heat pump and is environmentally clean, i.e. without greenhouse gas emission, if the electricity is generated from renewable energy resources, such as wind and solar. The use of the cooling mode can provide further benefits like a shorter investment payback and human thermal comfort in summer. As a result, application of horizontal loops for new and retrofit residential and commercial use in northern Japan is feasible particularly in farmland areas. 相似文献
11.
12.
《International Journal of Hydrogen Energy》2021,46(57):29400-29410
A housing insulation of hydrogen refuelling station is vital from the aspect of safe operation of equipment in an environment that is installed. To secure hydrogen supply during the whole year, this work brings the solution for both cooling and heating insulation equipment inside of hydrogen refuelling station installed in Croatia, Europe. This hydrogen refuelling station was designed as an autonomous photovoltaic-hydrogen system. In the interest of improving its energy efficiency, an optimal thermal management strategy was proposed. To select the best technological solution for thermal management design which will maintain optimal temperature range inside the housing in cold and warm months, a detailed analysis of the system components thermodynamic parameters was performed. Optimal operating temperatures were established to be 25 °C in summer and 16 °C in winter, considering components working specifications. Insulation, type of cooling units, and heaters have been selected according to the HRN EN 12831 and VDI 2078 standards, while the regime of the heating and cooling system has been selected based on the station's indoor air temperature. The annual required heating and cooling energy were calculated according to HRN EN ISO 13790 standard, amounting to 1135.55 kW h and 1219.55 kW h, respectively. Annual energy share obtained from solar power plant used for the heating and cooling system resulted in 5%. The calculated thermal management system load turned out to be 1.437 kW. 相似文献
13.
Yang Yu Xiao-Ni Qi Xiao-Chen Hou Xiao-Hang Qu Qian-Jian Guo He-Gang Zhu 《亚洲传热研究》2022,51(3):2667-2687
A large amount of waste heat generated in industrial production needs to be discharged by circulating cooling water systems. To save freshwater resources, freshwater cooling towers have been widely replaced by seawater cooling towers in coastal areas, but research on the thermal performance of seawater cooling towers is still relatively less. In this study, a detailed calculation model based on the heat/mass transfer process of seawater–air two-phase counterflow was established, and the reliability of the proposed model was verified. The computer program developed under the VC++ framework was used for the numerical solution of the model. The effects of five inlet parameters on the cooling efficiency and heat dissipation were studied. The simulation results showed that with the increase of salinity, the cooling performance was reduced. When the salinity increased by 10 g/kg, the outlet water temperature rose by about 0.13°C. The wet-bulb temperature increased by 1°C and the cooling efficiency increased by about 0.77%, while total heat dissipation was reduced by about 36.37 kW. When the air–water ratio increased, the cooling performance was improved, but the maximum cooling efficiency was affected by heat load. The change of dry-bulb temperature had little effect on the cooling performance. With the increase of water temperature, the cooling efficiency and heat dissipation increased. The calculation model and simulation results can provide practical guidance for the operation of seawater cooling towers. 相似文献
14.
This paper presents results of CFD analysis of an electronics cooling enclosure used as part of a larger telecommunication radar system. An original cooling enclosure was simulated using Flotherm which results were taken as the benchmark thermal performance. It was found that the operating temperature of one of the Radio Frequency (RF) components will exceed the design temperature limit of the PCB. A solution involving a re-design of thermal spreading arrangements using a 3 mm thick copper shelf and a Vapour Chamber (VC) heat pipe was found to bring the operating temperatures of all RF components within the specified temperature limits. The use of a VC, in particular, reduced the 60 W RF component steady state temperature by an average of 5.4 °C. The study also shows that increasing the finned heat exchanger cooling air flow rate can lower further the RF components temperature though at the expense of increasing energy consumption of the fan. 相似文献
15.
A domestic-scale prototype experimental solar cooling system has been developed based on a LiBr/H2O absorption system and tested during the 2007 summer and autumn months in Cardiff University, UK. The system consisted of a 12 m2 vacuum tube solar collector, a 4.5 kW LiBr/H2O absorption chiller, a 1000 l cold storage tank and a 6 kW fan coil. The system performance, as well as the performances of the individual components in the system, were evaluated based on the physical measurements of the daily solar radiation, ambient temperature, inlet and outlet fluid temperatures, mass flow rates and electrical consumption by component. The average coefficient of thermal performance (COP) of the system was 0.58, based on the thermal cooling power output per unit of available thermal solar energy from the 12 m2 Thermomax DF100 vacuum tube collector on a hot sunny day with average peak insolation of 800 W/m2 (between 11 and 13.30 h) and ambient temperature of 24 °C. The system produced an electrical COP of 3.6. Experimental results prove the feasibility of the new concept of cold store at this scale, with chilled water temperatures as low as 7.4 °C, demonstrating its potential use in cooling domestic scale buildings. 相似文献
16.
Statistics have confirmed that a lawn placed on a roof top can reduce the cooling load. In this study, the VISUAL DOE 4.0 energy simulation program was used to determine the effects of roof lawn gardens (RLG) on the annual energy required for cooling, and annual electrical usage in an experimental model. The overall heat transfer coefficient (U-Value) of the RLG was estimated by using data from site measurements and the effect of the RLG on the building’s energy consumption was calculated by the simulation program. The effect of different thicknesses of soil was also investigated. From the field measurements, it was confirmed that the RLG could reduce building heat gain. Thus, an experiment was set up to find the energy benefits of the RLG. With evaporative cooling by the RLG, it was found that the consumption of energy in a building with a RLG with 0.20 m of soil was 37.11% less than in a building with a bare roof surface (without evaporative cooling). Moreover, a building with 0.10 m of soil in the RLG consumed 31.07% less energy than a building with a bare roof surface. The results show that an increase in the thickness of the soil layer reduces the building energy consumption. 相似文献
17.
Passive evaporative cooling has great potential as an alternative to conventional air‐conditioning in arid hot climates because of its low cost and zero pollution. This paper describes a novel evaporative cooling system with an automatic wind‐tracking device to improve its operating efficiency. The design and operating principles are discussed. A mathematical model is simplified by the assumption of convective heat and mass transfer of staggered streamlets of water. A computer program has been developed to calculate the deflection and length of spray water streamlets, as well as evaporative water mass, minimum cooled water temperature and required cooling time. A typical example illustrates that approximately 20 kg water are evaporated and around 26 min are required for 980 kg of water to be cooled from 28°C to the wet bulb temperature of 19.2°C of ambient air in a typical arid hot climate (relative humidity = 0.30, dry bulb temperature = 32°C and wind velocity = 4 m s?1). The application of adsorbents, would allow the evaporative cooling system to be applied in hot, humid climates, in addition to hot climates with low humidity. Copyright © 2006 John Wiley & Sons, Ltd. 相似文献
18.
This paper presents a case study of the prediction, potential and control of plume in wet cooling towers from a huge commercial building in Hong Kong based on the weather data available for a particular year. The power input is found to be lower and the coefficient of performance (COP) moderate when all the 10 towers with low speed are in use, while it is found to be reverse when there are five towers, especially, three low and two high‐speed towers are used. It is also found that the combined heating and cooling option can be a better approach than that of the heating option alone from the point of view of thermodynamics as well as from the point of view of economics. The COP of the chillers increases from 6.01 to 7.09 when the number of cooling towers increases from five to ten. On the other hand, the power consumption first decreases and then increases which is mainly due to the increment in the consumption of fan power from 270 to 900 kW for both options. The overall power consumption decreases slightly for the combined heating and cooling option, while in the heating option, the overall power consumption increases slightly. However, it is observed that a proper operation of cooling towers is an effective means to control and/or at least reduce the potential of visible plume generated by wet cooling towers at the existing chilling plant design for this particular building. Copyright © 2006 John Wiley & Sons, Ltd. 相似文献
19.
A theoretical model is developed to establish an indepth understanding of the performance of a three-stage wind tower with a bypass system for indoor cooling in rural dry and hot climates. Model simulations are presented for a wide range of ambient conditions that include inlet wind speed, inlet temperature and relative humidity. Simulation results provide an insight into the desirable water flow rates and air-to-water loadings for comfort zone tem-peratures and relative humidity levels at the exit of the wind tower. Simulations show wind towers with variable cross-sections provide an increase in the cooling power for the same inlet wind speed, inlet air temperature and relative humidity when compared to wind towers with a constant cross-section. The study shall lead to a better understanding to designing wind towers that are both environmentally friendly and energy efficient. 相似文献
20.
《Applied Thermal Engineering》2007,27(14-15):2473-2482
The parallel-plain fin (PPF) array structure is widely applied in convective heat sinks in order to create extended surface for the enhancement of heat transfer. In the present study, for investigating the influences of designing parameters of PPF heat sink with an axial-flow cooling fan on the thermal performance, a systematic experimental design based on the response surface methodology (RSM) is used. The thermal resistance and pressure drop are adopted as the thermal performance characteristics. Various designing parameters, such as height and thickness of fin, width of passage between fins, and distance between the cooling fan and the tip of fins, are explored by experiment. Those parameters affect the structure arrangement, geometry of fins and the status of impinging jet from an axial-flow cooling fan installed over the heat sink. A standard RSM design called a central composite design is selected as experimental plan for the four parameters mentioned above. An effective procedure of response surface methodology (RSM) has been proposed for modeling and optimizing the thermal performance characteristics of PPF heat sink with the design constrains. The most significant influential factors for minimizing thermal resistance and pressure drop have been identified from the analysis of variance. The confirmation experimental results indicate that the proposed model is reasonably accurate and can be used for describing the thermal resistance and pressure drop with the limits of the factors studied. The optimum designing parameters of PPF heat sink with an axial-flow cooling fan under constrains of mass and space limitation, which are based on the quadratic model of RSM and the sequential approximation optimization method, are found to be fin height of 60 mm, fin thickness of 1.07 mm, passage width between fins of 3.32 mm, and distance between the cooling fan and the tip of fins of 2.03 mm. 相似文献