共查询到15条相似文献,搜索用时 171 毫秒
1.
脉动上举力是导致消力池或水垫塘底板发生揭底破坏的主要原因之一。在设计溢洪道衬砌板块的厚度时必须考虑脉动压力的作用。该文对脉动上举力的形成进行了理论分析和推导。得出板块所承受的瞬时最大脉动上举力的表达式。并据此给出衬砌板块的设计厚度公式.通过与实验结果等的比较,认为这一结果是合理的。 相似文献
2.
以瞬变流模型和随机信号理论为基础,在乌江构皮滩模型的水垫塘边墙上布置了五个测点,运用上举力量测仪量测板块所受的上举力.实验前对仪器进行了动态标定.量测了校核、设计、正常高水位下表孔单泄、表中孔联合泄洪共6种工况下衬砌块上的脉动上举力,得出相应的两个回归经验公式,为边墙衬砌块的设计提供了科学依据. 相似文献
3.
4.
5.
6.
阐述止水破坏情况下消力池护坦受到脉动上举力的作用,并初步探讨止水破坏情况下消力池护坦抗浮稳定计算原则,对比止水有效及破坏情况下消力池护坦抗浮稳定安全性,提出应重视脉动上举力对消能工稳定的影响,并结合脉动上举力的产生机理及对板块的破坏形式提出消力池护坦防护措施. 相似文献
7.
在冲坑底部岩块上脉动上举力的实验研究 总被引:6,自引:6,他引:6
本文以瞬变流模型为基础,在三峡溢流坝断面模型冲坑底部,详细地量测了不同尺寸岩块上的脉动上举力,获得脉动上举力的统计资料,验证了瞬变流理论的分析成果,为探讨基岩的冲刷机理和水垫塘内混凝土底板块的设计提供了科学依据。 相似文献
8.
超短型水垫塘底板块上脉动上举力试验研究 总被引:3,自引:0,他引:3
基于瞬变流理论模型,本文在1:110的构皮滩工程超短型水垫塘消能布置的整体模型上,利用测力传感器详细地量测了不同泄流工况下,水垫塘底部不同位置处底板块上的脉动上举力,获得了脉动上举力的统计资料,分析了水垫塘底部不同区底板块的受力特征,为水垫塘底板块的设计与防护提供了科学依据 相似文献
9.
目前,对消力池或水垫塘中底板块的脉动压强研究资料居多,对冲坑底部岩块上的脉动上举力研究资料甚少,而对边墙或边坡岩块上脉动上举力的试验研究至今尚为空缺。笔者介绍了水垫塘边墙板块上脉动上举力的量测技术,并通过某工程在1:110比尺水垫塘模型上当坝身泄洪时,对水垫塘边墙板块上的脉动上举力进行实验研究。 相似文献
10.
高坝下游水垫塘混凝土底板块的稳定性分析 总被引:3,自引:1,他引:2
本文利用随机振动理论详细地分析了高坝下游水垫塘底板块的失稳破坏机理和板块的起动过程,建立了板块振动过程和脉动上举力之间的统计联系,并在此基础上导出了板块的动态稳定性条件,为板块的设计提供了科学依据。 相似文献
11.
结合具体工程模型试验,研究了水垫塘透水底板不同开孔率对上举力的影响.结果表明:在采用透水底板这一新型消能方式减小底板上举力的情况下,不同的开孔率对水垫塘不同位置的底板上举力会产生影响,同时还分析研究了脉动压力空间积分尺度与水垫塘底板上举力的关系,并根据试验的实测数据提出了本工程上举力的预测公式.文中所阐述的透水孔开孔率对不同位置底板上举力的影响趋势,可为同类工程中透水底板的设计与施工提供一定的参考. 相似文献
12.
水垫塘底板稳定性控制指标的探讨 总被引:12,自引:3,他引:9
基于几个高坝水垫塘底板水力模型试验研究,对稳定性控制指标进行了探讨。从脉动压强、上举力和冲击压强之间关系的角度,得出了冲击压强所表示水动力荷载的量化指标。文中所述成果可用以评价类似工程的底板稳定性并作为设计依据。 相似文献
13.
The mechanism of the fluid-solid coupled vi-bration is analyzed as the fluctuating pressure acts on the inletand the outlet slits of a slab. The parameter multinomialmethod was exploited to calculate the pressure field within thejoints of the slabs by solving the basic equations of the oscilla-tion flow. The calculated result shows that the time-averageduplift increases with the increase of the length of the slab andis large in the middle and is small in both sides. The time-av-eraged uplift reduces with the increase of water depth, and thefluctuating uplift reduces rapidly with the increase of thethickness of the slit. The calculated result is in agreementwith the experimental results. 相似文献
14.
15.
Yu. G. Zharkov 《Power Technology and Engineering (formerly Hydrotechnical Construction)》1990,24(4):270-276
1. | For blocks (slabs) with a smooth surface laid flush with the bottom, under the effect of a high-velocity flow with a uniform motion on them, the mean uplift is equal to zero. |
2. | Under the effect of a fluctuating load, the block rises to a small height, which leads to a substantial increase of the mean dislodging load, primarily due to an increase of pressure on the bottom of the block. |
3. | In the case of rock bed, when the sizes of the projections of the natural roughness are an order of magnitude and more greater than the height of uplift of the separate elements under the effect of the fluctuating load, the effect of the latter on dislodging a separate element is felt primarily on rupturing the bonds between adjacent blocks, and the main role in dislodging the separate elements is played by the mean uplift. |