Diversity in seed and flour properties in field pea (Pisum sativum) germplasm

The genetic diversity in agronomic, seeds (physicochemical, hydration, textural and cooking) and flour (pasting and gel texture) characteristics amongst 71 field pea lines was studied. L∗-, a∗-, b∗-values, seed weight, density, hydration capacity, swelling capacity and cooking time ranged between 43.6 and 67.1, −2.3 and 6.2, 5.8 and 17.4, 4.26 and 25.65 g/100 seeds, 0.55 and 2.01 g/ml, 0.05 and 0.31 g/seed, 0.02 and 0.76 ml/seed and 45 and 81 min, respectively. Amylose content of starch ranged between 21.4% and 58.3%. Pasting temperature, peak viscosity, breakdown, final viscosity and setback of flours from different lines ranged from 73.5 to 81.5 °C, 533 to 3000, 8 to 187, 121 to 2276, and 183 to 998 cP, respectively. The frequency distribution and principal component analysis revealed significant variation in quality traits amongst the 71 field pea lines.     

In vitro starch digestibility,expected glycemic index,and thermal and pasting properties of flours from pea,lentil and chickpea cultivars

In vitro starch digestibility, expected glycemic index (eGI), and thermal and pasting properties of flours from pea, lentil and chickpea grown in Canada under identical environmental conditions were investigated. The protein content and gelatinization transition temperatures of lentil flour were higher than those of pea and chickpea flours. Chickpea flour showed a lower amylose content (10.8–13.5%) but higher free lipid content (6.5–7.1%) and amylose–lipid complex melting enthalpy (0.7–0.8 J/g). Significant differences among cultivars within the same species were observed with respect to swelling power, gelatinization properties, pasting properties and in vitro starch digestibility, especially chickpea flour from desi (Myles) and kabuli type (FLIP 97-101C and 97-Indian2-11). Lentil flour was hydrolyzed more slowly and to a lesser extent than pea and chickpea flours. The amount of slowly digestible starch (SDS) in chickpea flour was the highest among the pulse flours, but the resistant starch (RS) content was the lowest. The eGI of lentil flour was the lowest among the pulse flours.     

Relationships between various functional,thermal and pasting properties of flours from different Indian black gram (Phaseolus mungo L.) cultivars

Flours from different black gram cultivars were investigated for functional, thermal and pasting properties and related to each other using Pearson correlations and principal component analysis (PCA). Ash, fat, protein content and bulk density of flours ranged between 25.7 and 32.5, 5.2 and 10.2, 220 and 289 g kg^?1 and 519 and 563 kg m^?3, respectively. The water absorption capacity (WAC) and oil absorption capacity (OAC) of flours ranged between 2390 and 3450, and 1130 and 1700 g kg^?1, respectively. Least gelation concentration (LGC) for various black gram flours ranged between 8 and 12%, thereby suggesting their good gelating ability. The results showed that the foams produced by black gram flours were relatively thick with low foaming capacity (36.2–49.2%) and foam stability > 90% after 120 min of storage. The transition temperatures (T_o, T_p and T_c) and enthalpy of gelatinization (ΔH_gel) determined using differential scanning calorimeter, ranged between 71.0 and 75.7, 76.1 and 80.4, 81.9 and 86.0 °C, and 3.08 and 3.67 J g^?1, respectively. Pasting temperature, peak‐, breakdown‐, final‐ and setback viscosity were between 68.9 and 81.1 °C, 2988 and 3699, 1200 and 1730, 2839 and 3520, and 1110 and 1474 mPa s, respectively. PCA showed that UG‐218 and UG‐1008 flours were located at the far left of the score plot with a large negative score, while the KU‐3 and UG‐1017 flours had a large positive score in the first principal component (PC1). Overall, these flours differed to the greatest degree in terms of the properties of their flours. Several significant correlations between functional, thermal and pasting properties were revealed both by Pearson correlation and PCA. Copyright © 2007 Society of Chemical Industry     

Gelation,thermal and pasting properties of pigeon pea (Cajanus cajan L.), dolichos bean (Dolichos lablab L.) and jack bean (Canavalia ensiformis) flours

This study evaluated the rheological, thermal and pasting properties of pigeon pea (PP), dolichos bean (DB) and jack bean (JB) legume flours and gels. Starch and protein contents were also measured and its molecular weight distribution was determined by electrophoresis. PP and DB showed the highest viscosities while JB had the highest pasting temperature. The minimum flour concentrations for gel formation were estimated at 6–8% for DB and PP and 10% for JB. Above these concentrations all flour suspensions heated to 95 °C led to gels with a solid-like behavior. Differential scanning calorimetry showed two endothermic peaks in all flours at 80–89 °C and 96–100 °C. Avrami model was successfully fitted to the hardening kinetics of PP and DB gels stored at 4 °C. The half-life times were 22 and 6 h for PP and DB respectively. PP and DB flours were able to form self-supporting gels and could be applied in the formulation of gel-like foods.     

Physicochemical,thermal, and pasting properties of flours and starches of eight Brazilian maize landraces (Zea mays L.)

Both genetic and environmental factors create significant variation in the amount and quality of maize landrace constituents. Details on the flours and starch characteristics have not been fully investigated. The physicochemical, pasting and thermal properties of 8 promising cultivars were assessed in this study and those properties were correlated. Higher values of swelling and solubility (RJ – 13.14%; 14.39%), lipid content (MG – 5.53%), WBC (PR – 18.89%), and amylose content (PR – 27.43%) were found for those genotypes. Lower onset temperatures of gelatinization (To) were observed for RX-F1 (66.1 °C) as RX-F1 (68.7 °C) genotype showed the lower pasting temperatures. A wide range of viscosity values was found among the maize landraces (MG-F0, 343 mPa s and RJ-F1, 175 mPa s) as well as for the retrogradation (R8C-F1, 796 mPa s and RX-F1, 22 mPa s). ATR-FTIR spectroscopy revealed amylose, amylopectin, lipids, and proteins as major flours constituents and their differences were discriminated by PCA analysis.     

Changes in functional characteristics of starch during water caltrop (Trapa Quadrispinosa Roxb.) growth

This study was carried out to establish the changes of physicochemical properties of Taiwan’s water caltrop (Trapa Quadrispinosa Roxb.) starch at various stages of maturity during growth. Investigations showed that the dry matter and starch contents of water caltrop increased from 9.7% to 25.61% and from 49.4% to 79.4% (d.b.), respectively, as growth progressed (from 14th to 42nd day after fruit development). The shape of the starch granules was smooth, oval and poly-angular during the growth period. The granule size of starch increased with increase of physiological age, ranging from 19.4 μm to 32.2 μm. The X-ray diffraction patterns could be classified as a typical A-type crystalline structure. Swelling power and solubility of water caltrop starch increased with increases of growth time. Starches obtained from water caltrop at the early stage exhibited a lower gelatinization temperature (T_o, T_p, T_c) and gelatinization enthalpy (ΔH) than did the late stage of maturity. The rapid viscosity analyzer (RVA) parameters suggested that water caltrop starch paste had a low breakdown, and appeared to be thermo-stable, at the early harvest time. The pasting temperature, peak viscosity, final viscosity and setback value of water caltrop starch increased as growth progressed. Different starch granular size and amylose content could be the major factors influencing starch physicochemical properties during maturity.     

Some properties of corn grains and their flours I: Physicochemical,functional and chapati-making properties of flours

The variability in physical (1000 kernel weight and bulk density) and mechanical (rupture force) properties of grains from different Indian corn varieties (African tall, Ageti, Early composite, Girja, Navjot, Parbhat, Partap, Pb sathi and Vijay) were studied. The functional (colour, gelatinization, retrogradation and pasting) and chapati-making properties of flours milled from corn varieties were evaluated. African tall flour showed the highest enthalpy of gelatinization (ΔH_gel), peak-, trough-, breakdown-, final-, and setback viscosities, and L^∗ (84.4) value and resulted in chapaties with higher extensibility (5.76 mm) and of light colour. African tall flour, with the lowest protein content, showed the lowest grain rupture force. Amylose content and hardness of starch gel from African tall were found to be the lowest among all corn varieties. Girja flour, with the lowest transition temperatures and ΔH_gel, showed the lowest extensibility of chapaties made from it. Pearson correlations between physical and textural properties of corn grains and the functional properties of their flours were established. Rupture force of corn grain and protein content of flour showed a negative correlation with peak viscosity of flour (r = −0.917, and −0.863, p < 0.01). The protein content of flours was negatively correlated with L^∗ (r = −0.759, p < 0.01) value and positively with b^∗ (r = 0.635, p < 0.01) value. Pasting temperature of flours showed a significant negative correlation with peak, trough, breakdown, final and setback viscosities (r = −0.836, −0.846, −0.778, −0.871, and −0.847, respectively, p < 0.01). Pearson correlation was also established between the grain and starch properties. Rupture force of corn grains was positively correlated with the amylose content of starch (r = 0.950, p < 0.01).     

In vitro digestibility,structural and functional properties of starch from pigeon pea (Cajanus cajan) cultivars grown in India

Starches isolated from two pigeon pea cultivars (AL-15 and AL-201) were evaluated for their in vitro digestibility, structural and functional properties. Both the cultivars exhibited a characteristic C-type diffraction pattern with relative crystallinity values of 31.9% and 34.2%, for AL-15 and AL-201, respectively. The structural characterization obtained using high performance size exclusion column chromatography revealed that molecular weight of amylopectin and amylose was higher for AL-201 (396 and 3.92 × 10⁶ g/mol, respectively) in comparison to AL-15 starch (354 and 3.31 × 10⁶ g/mol, respectively). AL-201 exhibited higher values for transition temperatures, enthalpy of gelatinization, pasting temperature and percentage retrogradation in comparison to AL-15 starch. Slowly digestible starch, readily digestible starch and resistant starch contents of AL-15 and AL-201 cultivars were observed to be 31.0, 8.1 and 60.9% and 29.6, 5.2 and 65.2%, respectively. The hydrolysis index and RS values indicated that pigeon pea starches were highly resistant to digestion.     

Characterisation of lipoxygenase from pea seeds (Pisum sativum var. Telephone L.)

Lipoxygenase (LOX) from pea seeds (Pisum sativum var. Telephone L.) was extracted and studied of biochemical properties. The molecular mass of purified lipoxygenase was 93 kDa. The effects of substrate specificity, pH, and sensibility to various inhibitors: caffeic acid, ferulic acid, benzoic acid, catechin, quercetin and kaempferol of LOX were investigated. Lipoxygenase showed the highest activity toward linoleic acid and the lowest toward oleic acid as substrates. Kinetic studies indicated that V_max of the LOX activity was 151.5 U/min and corresponding K_m value of 0.44 × 10⁻³ M. Optimum pH of lipoxygenase was reported at 5.5. Caffeic acid was the most effective inhibitor and kaempferol was the least effective.     

Amaranthus hypochondriacus and Amaranthus caudatus germplasm: Characteristics of plants,grain and flours

In the present study, the plant, grain and flour characteristics of 48 Amaranthus hypochondriacus and 11 Amaranthus caudatus lines are reported. A. hypochondriacus grains had a higher thousand kernel weight (0.62–0.88 g), a creamish yellow colour (L∗ = 61.38–68.29, b∗ = 5.26–6.8 and a∗ = 19.71–23.84), whereas A. caudatus grains had a lower thousand kernel weight (0.46–0.70 g) and a reddish-brown colour (L∗ = 47.1–51.2, b∗ = 11.82–14.02 and a∗ = 7.72–13.29). The A. caudatus lines had a higher protein content, fat content and tendency for retrogradation, and lower α-amylase activity as compared to A. hypochondriacus lines. The Amaranthus lines with higher a∗-values and lower thousand kernel weight, L∗- and b∗-values, had a higher fat, crude fibre and protein content. The correlation of fat and crude fibre content with the thousand kernel weight, L∗-, a∗- and b∗-values, was significant. The A. hypochondriacus lines showed higher pasting temperature, and lower peak viscosity, breakdown and setback, as compared to the A. caudatus lines. The result reflected that the lines with higher α-amylase activity showed a lower peak viscosity, breakdown, final viscosity and gel hardness, and a higher pasting temperature.     

Milling behavior of hulled barley and its thermal and pasting properties

Eight commonly grown Indian hulled barley cultivars were studied for their dehusking, pearling, physico-chemical, β-glucan, pasting and thermal behavior. Milling of the hulled barley at 14% moisture significantly lowered the dehusking and pearling time as compared to milling at 10% moisture content. The extraction rate ranged from 55.05% to 62.35% and significantly (p < 0.05) differed among the cultivars. Particle size distribution of flours was significantly different among the cultivars with flour from RD-2552 and RD-2035 cultivars having the most even particle size distribution. The colour difference (ΔE) was not significantly different among cultivars. The extractable β-glucan content varied from 1.93% to 3.81% among the cultivars and was highest in PL-172. The final pasting viscosity was significantly different among cultivars while the pasting temperature did not vary significantly. The enthalpy (ΔH) of gelatinization of barley flour varied from 4.45 to 7.08 J/g and gelatinization temperature (T_p) varied from 64.23 to 66.26 °C.     

Physico–chemical,thermal and pasting properties of fractions obtained during three successive reduction milling of different corn types

The physico–chemical, thermal and pasting properties of fractions obtained during three successive reduction milling of degermed grains of four corn types (popcorn, sweet corn, dent corn, and white corn) was studied. Popcorn and white corn gave higher coarser fraction (14–20 mesh) yield than dent and sweet corn. Protein content progressively decreased with increase in fineness in the particle size. Fractions of first reduction stage showed higher fat content and L^∗ value; and lower b^∗ value than the fractions from second and third reduction stages. L^∗ value increased whereas ‘a^∗’ and ‘b^∗’ values decreased with increase in fineness of the fractions. T_o, T_p and ΔH_gel, peak viscosity, breakdown, setback and final viscosity increased while pasting temperature decreased with increase in fineness of the fractions. The results showed that the successive reduction dry milling of a single corn type could produce fractions with varied characteristics.     

Genotypic diversity in physico-chemical,pasting and gel textural properties of chickpea (Cicer arietinum L.)

Twenty chickpea cultivars were evaluated for genetic diversity in seeds (physical, hydration and cooking), flours (composition, pasting and gel textural) and starch (swelling, thermal, amylose content and amylopectin structure) properties. Frequency distribution and principal component analysis revealed significant differences among the cultivars studied. Pasting temperature, peak viscosity, breakdown, final viscosity and setback of flours ranged from 75.0 to 87.1 °C, 564 to 853 cP, 32 to 123 cP, 573 to 969 cP, and 84 to 185 cP, respectively. Amylose content of starch ranged from 28.26% to 52.82%. Amylopectin unit chains of DP 6–12, 13–18, 19–24 and 25–30 ranged from 36.2% to 43.25%, 36.44% to 38.68%, 14.86% to 18.22% and 4.95% to 6.9%, respectively. To establish the relationships between different properties Pearson correlation coefficients (r) were computed. Cluster analysis for grain and flour characteristics was also done to see the association between chickpea cultivars.     

Use of multivariate techniques in studying the flour making properties of some CMD resistant cassava clones

High quality cassava flour (HQCF) is one of the primary products of raw cassava root that has continued to find wider food application in Nigeria. In this study, some 43 newly developed cassava mosaic disease (CMD) resistant clones of cassava were screened based on some physical (flour yield, bulk density, and tri-stimulus colour characteristics (L^∗, a^∗, b^∗, Chroma and Hue)), chemical (moisture, protein, ash, starch, amylose, sugar contents, TTA, pH, and cyanogenic potential), functional (water and oil absorption capacities, water solubility, swelling power, least gelation capacity, diastatic activity, percent damaged starch, and alkaline water retention), and pasting properties. One-way analysis of variance (ANOVA) showed that all properties measured varied significantly (P < 0.001). The flours had a wider range of starch content (65–88%), amylose content (13–23%), water absorption capacity (136–224%), diastatic activity (128–354 mg maltose), peak viscosity (77–328 RVU), final viscosity (56–217 RVU), and trough (32–152). Due to the peculiarity of the experimental data generated, two protocols of applying multivariate statistical techniques were evaluated for discriminating the cassava clones. By first applying principal component analysis (PCA), followed by cluster analysis (CA) and finally, discriminant function analysis (DFA) of the experimental data, it was possible to achieve about 87% correct classification of the cassava clones. The final viscosity and diastatic activity of the flours were found to be the most important variables for classifying the cassava clones.     

Characterization of protein isolates from different Indian chickpea (Cicer arietinum L.) cultivars

Protein isolates prepared by alkaline solubilization followed by isoelectric precipitation and freeze drying from desi (PBG-1, PDG-4, PDG-3, GL-769, and GPF-2) and kabuli (L-550) chickpea cultivars were evaluated for functional (water and oil absorption capacities, least gelation concentration, foaming capacity and stability) and thermal properties. Significant difference (P ? 0.05) in properties of kabuli and desi chickpea protein isolates was observed. Kabuli chickpea protein isolate showed significantly (P ? 0.05) higher ash (1.14%), protein (94.4%), L^∗, ΔE value, oil absorption capacity (OAC) and lower water absorption capacity (WAC) than their corresponding desi chickpea protein isolates. The solubility-pH profile of different protein isolates showed minimum solubility in the pH between 4.0 and 5.0 and two regions of maximum solubility at pH 2.5 and 7.0. Foaming capacity of all protein isolates increased with the increase in concentration. Kabuli chickpea protein isolate showed the highest foam stability (94.7%) after 120 min of storage. The thermal properties of protein isolates from different chickpea cultivars were studied by differential scanning calorimetry (DSC). Protein isolates from both the chickpea types differed significantly (P ? 0.05) in peak denaturation temperature (T_d) and heat of transition (ΔH). Kabuli type protein isolate exhibited lower T_d and ΔH value as compared to those from desi types. The interrelationships between characteristics of protein isolates showed a significant (P ? 0.05) negative correlation of T_d with protein content and OAC. It was also observed that cultivars with high fat content had high ΔH and lower WAC.     

Relationships Between Selected Properties of Seeds,Flours, and Starches from Different Chickpea Cultivars

ABSTRACT

Five desi (PBG-1, PDG-4, PDG-3, GL-769, and GPF-2) and one kabuli type (L-550) chickpea cultivars were evaluated for their seed mass, volume, hydration capacity, swelling capacity, cooking time, and instrumental textural properties (hardness, cohesiveness, gumminess, and chewiness). Flour was prepared from these chickpea cultivars and various physicochemical and functional properties were determined. The pasting (pasting temperature, peak viscosity, breakdown, and final viscosity) and gelatinization (T _o, T _p, T _c, and ΔH _gel) properties of these flours were measured using Rapid Visco Analyzer (RVA) and Differential Scanning Calorimeter (DSC), respectively. Starch was also isolated from chickpea cultivars and evaluated for amylose content, swelling power, solubility, and syneresis values. Physicochemical, cooking, and instrumental textural properties of seeds of different chickpea cultivars were related to physicochemical, gelatinization, and pasting properties of their flours and physicochemical properties of their starches. Selected properties of chickpea seeds were significantly correlated with the properties of their starches and flours. Hardness value of soaked chickpea seeds was positively correlated to cooking time, seed mass, seed volume, hydration, and swelling capacity (p < 0.01). Water solubility index (WSI) of chickpea flours was positively correlated to seed mass, volume, hydration capacity, and hardness value (p < 0.05). Selected instrumental textural parameters of seeds had positive correlation with ΔH _gel of flours (p < 0.01). Peak viscosity of flours showed positive correlation to breakdown, final viscosity, bulk density, and negative correlation to cohesiveness of soaked seeds (p < 0.01). Final viscosity showed negative correlation to bulk density and water absorption index (WAI) (p < 0.01) of flours.     

Thermal degradation kinetics of anthocyanins and visual colour of Urmu mulberry (Morus nigra L.)

Urmu mulberry (Morus nigra L.) juice was concentrated from 15.02 to 45.20 °Brix by rotary vacuum evaporator at 40 °C. The objectives of this study were to determine the titratable acidity, soluble solid content, antioxidant capacity, total monomeric anthocyanins and total phenolic matter in prepared concentrate, to investigate the thermal degradation kinetics of anthocyanins and Hunter colour parameters (L^∗, a^∗, b^∗) and total colour difference (TCD^∗) and to develop a relationship between visual colour and anthocyanin during thermal processing at 60, 70 and 80 °C. Monomeric anthocyanin degradation showed a first order reaction kinetics. The zero order, first order and a combined kinetics model were applied to the changes in Hunter colour parameters (L^∗, a^∗ and b^∗) and total colour difference (TCD^∗). All colour parameters followed an apparent combined kinetics model. The degradation of anthocyanins showed positive correlation with a^∗, b^∗ and L^∗ and negative correlation with TCD^∗.     

Physicochemical properties of thermal alkaline treated pigeonpea (Cajanus cajan L.) flour

Thermal alkaline treatment, normally used for corn, was applied to pigeonpea grains. Starch granules were isolated using wet milling and alkaline treatments. Effects of the calcium hydroxide [Ca(OH)₂] concentration in the range of 0–1% (w/v) on granule structure, crystalline structure, chemical composition, and physicochemical, thermal, and pasting properties of isolated starch granules were determined. Compared to native samples, thermal alkaline treated samples had higher protein, lipid, calcium, and phosphorus contents, but lower starch and amylose contents. Thermal alkaline treatment increased starch granular size and gelatinization temperatures, but decreased relative crystallinity, gelatinization enthalpy, swelling power, solubility, amylose leaching, and the pasting viscosity. Amylose-lipid complexes were not found in thermal alkaline treated flours. As the Ca(OH)₂ concentration increased, the amylose content, relative crystallinity, gelatinization temperature, and enthalpy also increased, but the swelling power, solubility, amylose leaching, and paste viscosity decreased. A higher Ca(OH)₂ concentration produced more stable starch granules that resisted re-gelatinization.     

Effect of ripeness and postharvest storage on the evolution of colour and anthocyanins in cherries (Prunus avium L.)

The relationship between colour parameters and anthocyanins of four sweet cherry cultivars, Burlat, Saco, Summit and Van was studied. The colour (L^∗, a^∗, b^∗, chroma and hue angle parameters) and anthocyanins were analysed during two different years at two different ripening stages (partially ripe, and ripe, respectively). The cherries were analysed at harvest and after storage at 1.5 ± 0.5 °C and 15 ± 5 °C for 30 and 6 days, respectively. The colour was measured by tristimulus colourimetry (CIELAB system) directly on the fruits, while anthocyanins were quantified by HPLC-DAD analysis on methanolic extracts of freeze-dried samples of the fresh cherries and on the differently stored cherries. L^∗, chroma, and hue angle values were always lower for the ripe than for the partially ripe cherries. All of the cultivars were found to contain cyanidin-3-rutinoside and cyanidin-3-glucoside as the major anthocyanins. The total anthocyanin content in fruits of the different cultivars varied in the order Burlat > Saco > Van > Summit. The concentration of anthocyanins increased at both temperatures of storage in both ripe and partially ripe cherries, but the extent of increase varied among cultivars. Cherries stored at 15 ± 5 °C showed higher reduction of L^∗, chroma and hue angle than fruits stored at 1.5 ± 0.5 °C. L^∗, a^∗, b^∗, chroma and hue angle correlated negatively (P < 0.001) with the total anthocyanins levels, but not with the total phenols. These results show that chromatic functions of chroma and hue correlate closely with the evolution of colour and anthocyanins levels during storage of sweet cherries and indicate that colour measurements can be used to monitor pigment evolution and anthocyanin contents of cherries (and vice versa).     

Quality attributes of starfruit (Averrhoa carambola L.) juice treated with ultraviolet radiation

Starfruit juice were exposed to ultraviolet (UV-C) light for 0, 30 and 60 min at room temperature (25 ± 1 °C). On exposure, the titratable acidity significantly decreased, while the decrease in °Brix and pH were not significant. With regard to colorimetric parameters, L^∗ value increased significantly with a subsequent decrease in a^∗ and b^∗ values corresponding to UV treatment time. Except for the ascorbic acid, other antioxidants measured (% DPPH inhibition, total phenols, flavonols, flavonoids and antioxidant capacity) showed enhancement on expsoure to UV (significant at 60 min). Microbial studies showed reduction in APC, yeasts and mould counts by 2-log cycle on UV treatments. These results supports the application of UV as a measure of non-thermal and physical food preservation technique for starfruit juice that can be explored commercially to benefit both the producers and consumers.