Interaction of NO and NO2 with the surface of CexZr1−xO2 solid solutions – Influence of the phase composition

Structural (XRD) and spectroscopic (EPR, IR and Raman) investigations were performed to elucidate the influence of CeO₂ content on the phase composition and surface chemistry of Ce_xZr_1−xO₂ solid solutions (x = 0.10–0.85), interacting with NO and NO₂ in the absence and presence of oxygen. Strong influence of ceria loading on the adsorption modes of both nitrogen oxides and the nature of the resultant surface species was revealed. Adsorption of NO led to formation of mononitrosyl complexes, dimers and N₂O, whereas interaction of NO₂ with the ceria–zirconia catalyst resulted in the adsorbate disproportionation or coupling, depending on the sample composition.     

Ce1−xCuxO2−x/Al2O3/FeCrAl catalysts for catalytic combustion of methane

A series of the Ce_1−xCu_xO_2−x/Al₂O₃/FeCrAl catalysts (x = 0–1) were prepared. The structure of the catalysts was characterized using XRD, SEM and H₂-TPR. The catalytic activity of the catalysts for the combustion of methane was evaluated. The results indicated that in the Ce_1−xCu_xO_2−x/Al₂O₃/FeCrAl catalysts the surface phase structure were the Ce_1−xCu_xO_2−x solid solution, -Al₂O₃ and γ-Al₂O₃. The surface particle shape and size were different with the variety of the molar ratio of Ce to Cu in the Ce_1−xCu_xO_2−x solid solution. The Cu component of the Ce_1−xCu_xO_2−x/Al₂O₃/FeCrAl catalysts played an important role to the catalytic activity for the methane combustion. There were the stronger interaction among the Ce_1−xCu_xO_2−x solid solution and the Al₂O₃ washcoats and the FeCrAl support.     

Preparation of CexZr1−xO2 (x = 0.75, 0.62) solid solution and its application in Pd-only three-way catalysts

Nanoparticles of Ce_xZr_1−xO₂ (x = 0.75, 0.62) were prepared by the oxidation-coprecipitation method using H₂O₂ as an oxidant, and characterized by N₂ adsorption, XRD and H₂-TPR. Ce_xZr_1−xO₂ prepared had single fluorite cubic structure, good thermal stability and reduction property. With the increasing of Ce/Zr ratio, the surface area of Ce_xZr_1−xO₂ increased, but thermal stability of Ce_xZr_1−xO₂ decreased. The surface area of Ce_0.62Zr_0.38O₂ was 41.2 m²/g after calcination in air at 900 °C for 6 h. TPR results showed the formation of solid solution promoted the reduction of CeO₂, and the reduction properties of Ce_xZr_1−xO₂ were enhanced by the cycle of TPR-reoxidation. The Pd-only three-way catalysts (TWC) were prepared by the impregnation method, in which Ce_0.75Zr_0.25O₂ was used as the active washcoat and Pd loading was 0.7 g/L. In the test of Air/Fuel, the conversion of C₃H₈ was close to 100% and NO was completely converted at λ < 1.025. The high conversion of C₃H₈ was induced by the steam reform and dissociation adsorption reaction of C₃H₈. Pd-only catalyst using Ce_0.75Zr_0.25O₂ as active washcoat showed high light off activity, the reaction temperatures (T₅₀) of 50% conversion of CO, C₃H₈ and NO were 180, 200 and 205 °C, respectively. However, the conversions of C₃H₈ and NO showed oscillation with continuously increasing the reaction temperature. The presence of La₂O₃ in washcoat decreased the light off activity and suppressed the oscillation of C₃H₈ and NO conversion. After being aged at 900 °C for 4 h, the operation windows of catalysts shifted slightly to rich burn. The presence of La₂O₃ in active washcoat can enhance the thermal stability of catalyst significantly.     

Regeneration of thermally aged Pt-Rh/CexZr1−xO2-Al2O3 model three-way catalysts by oxychlorination treatments

Pt-Rh/Ce_xZr_1−xO₂-Al₂O₃ with 0.6 and 1.0 wt.% noble metal loadings were prepared and characterized for their metal dispersion with respect to Ce_xZr_1−xO₂-free Pt-Rh/Al₂O₃ in fresh, thermally aged and oxychlorinated states. Thermal ageing at 973 K led to loss of metal dispersion in all cases but to negligible effect on the dispersion of the Ce_xZr_1−xO₂ component where present. Oxychlorination was able to fully recover metal dispersion in all cases but led to different effects on the redox properties of Ce_xZr_1−xO₂ which appeared to be related to the metal loadings. Despite showing improved dispersion following regeneration, higher loaded catalyst showed no improvement in light-off performance for either NO reduction or CO oxidation and showed poorer oxygen storage (OSC) ability, particularly at higher temperatures. Lower loaded catalyst showed improved dispersion, improved OSC and reduced light-off temperatures for NO reduction and CO oxidation after oxychlorination compared to that in the thermally aged state.     

Catalytic combustion of CH4 and CO on La1−xMxMnO3 perovskites

The activities of perovskites depend on compositions and preparation methods. Various perovskites, La_1−xM_xMnO₃ (M=Ag, Sr, Ce, La), have been prepared by two different methods (co-precipitation and spray decomposition). The new preparation method, spray decomposition, produced perovskites of a high surface area of over 10 m²/g. The catalytic activities for CH₄ and CO oxidation have been studied on a series of catalysts, La_1−xM_xMnO₃. The perovskite-type oxide, La_0.7Ag_0.3MnO₃, shows the highest catalytic activity: the complete conversion of CO and CH₄ at 370 and 825 K, respectively.     

Catalytic oxidation of nitrogen monoxide over La1−xCexCoO3 perovskites

This paper presents an investigation on the NO oxidation properties of perovskite oxides. La_1−xCe_xCoO₃ (x = 0, 0.05, 0.1, 0.2, 0.3, 0.4) perovskite-type oxides were synthesized through a citrate method and characterized by XRD, BET and XPS. The catalytic activities were enhanced significantly with Ce substitution, and achieved the best when x was 0.2, but decreased at higher x values. The performed characterizations reveal that the adsorbed oxygen on the surface plays an important role in the oxidation of NO into NO₂. The surface compounds after the co-adsorption of NO and O₂ at room temperature, were investigated by DRIFTS and TPD experiments. Three species: the bridging nitrate, the hyponitrites and the monodentate nitrate, were formed on the surface. The order of thermal stabilities was as follows: monodentate > hyponitrite > bridging. Among them, only the monodentate nitrate which decomposed at above 300 °C, would desorb NO₂ into the gas phase. When Ce was added, the temperature of monodentate nitrate desorption became low and the adsorption of the other two species decreased. This might be related to the oxidation state of Co on the surface. Analysis by synthesizing the characterization results and catalytic activity data shows that large amounts of adsorbed oxygen, small amount of inactive compounds on the surface and low NO₂ desorption temperature are favorable for the oxidation of NO.     

Catalytic wet peroxide oxidation of phenolic solutions over a LaTi1−xCuxO3 perovskite catalyst

LaTi_1−xCu_xO₃ perovskites are efficient catalysts for the oxidation of aqueous solutions of phenol using hydrogen peroxide as precursor of free radicals. The catalytic results have shown that under mild reaction conditions and oxidant contents lower than stoichiometric, phenol was rapidly removed with a final total organic carbon (TOC) conversion of ca. 90%. Initial rate of TOC removal depends dramatically on temperature, catalyst loading and peroxide concentration. Perovskite catalyst after reaction is completely regenerated by calcination and retains a similar catalytic performance. Finally, the catalytic results demonstrate that leaching of active species during the catalytic oxidation seems to proceed by a complex mechanism in which the presence of hydrogen peroxide in combination with phenol plays an essential role.     

Electrical resistivity and thermopower of (La1−xSrx)MnO3 and (La1−xSrx)CoO3 at elevated temperatures

Electrical resistivity and Seebeck (S) measurements were performed on (La_1−xSr_x)MnO₃ (0.02x0.50) and (La_1−xSr_x)CoO₃ (0x0.15) in air up to 1073 K. (La_1−xSr_x)MnO₃ (x0.35) showed a metal-to-semiconductor transition; the transition temperature almost linearly increased from 250 to 390 K with increasing Sr content. The semiconductor phase above the transition temperature showed negative values of S. (La_1−xSr_x)CoO₃ (0x0.10) showed a semiconductor-to-metal transition at 500 K. Dominant carriers were holes for the samples of x0.02 above room temperature. LaCoO₃ showed large negative values of S below ca. 400 K, indicative of the electron conduction in the semiconductor phase.     

Effect of ceria–zirconia ratio on the interaction of CO with PdO/Al2O3–(Cex–Zr1−x)O2 catalysts prepared by sol–gel method

The current work is devoted to study of CO interaction with PdO/Al₂O₃–(Ce_x–Zr_1−x)O₂ catalysts. Ceria–zirconia–alumina supports with different Ce/Zr ratio were prepared by sol–gel technique. The FT-IR characterization of CO adsorbed at −120 and 25 °C on oxidized and reduced samples revealed that Ce/Zr ratio modifies the surface properties of support and oxidation state of palladium. The catalyst with Ce/Zr molar ratio 0.5/0.5 was characterized with the highest ability to stabilize palladium in oxide state and the highest activity to oxidize CO. Redox treatment of catalysts improves their catalytic activity.     

Direct NO decomposition over La2−xBaxNiO4 catalysts containing BaCO3 phase

Catalytic and in situ Fourier Transform Infrared (FTIR) spectroscopic studies were conducted to investigate the adsorption and oxidation of o- and p-chlorophenol over a 3.6 wt.% V₂O₅/TiO₂ catalyst. At a space velocity of approximately 53,000 cm³ g⁻¹ h⁻¹, this catalyst was found to be active for the oxidation of o- and p-chlorophenol at temperatures as low as 200 °C, yielding CO₂ and HCl as the main products. Trace amounts of higher molecular weight products were also detected at the reactor outlet indicating the operation of additional condensation, coupling and chlorination/dechlorination side reactions in parallel to the main complete oxidation scheme. The in situ FTIR studies revealed that different phenols adsorb on the V₂O₅/TiO₂ catalyst through their hydroxyl group. Furthermore, the formation of similar surface species (i.e., maleates, acetates, formates and an aldehyde-type species) was observed. The results were compared with those of previous studies on the oxidation of m-dichlorobenzene (m-DCB) and benzene and suggest that a similar reaction mechanism is operating in all cases, although the relative kinetic significance of the different steps varies with the presence and the position of the hydroxyl and chlorine groups on the aromatic ring.     

Methane combustion and CO oxidation on LaAl1−xMnxO3 perovskite-type oxide solid solutions

Structural, redox and catalytic deep oxidation properties of LaAl_1−xMn_xO₃ (x=0.0, 0.05, 0.1, 0.2, 0.4, 0.6, 0.8, 1.0) solid solutions prepared by the citrate method and calcined at 1073 K were investigated. XRD analysis showed that all the LaAl_1−xMn_xO₃ samples are single phase perovskite-type solid solutions. Particle sizes and surface areas (SA) are in the 280–1180 Å and 4–33 m² g⁻¹ ranges, respectively. Redox properties and the content of Mn⁴⁺ were derived from temperature programmed reduction (TPR) with H₂. Two reduction steps are observed by TPR for pure LaMnO₃, the first attributed to the reduction of Mn⁴⁺ to Mn³⁺ and the second due to complete reduction of Mn³⁺ to Mn²⁺. The presence of Al in the LaAl_1−xMn_xO₃ solid solutions produces a strong promoting effect on the Mn⁴⁺→Mn³⁺ reducibility and inhibits the further reduction to Mn²⁺. Both for methane combustion and CO oxidation all Mn-containing perovskites are much more active than LaAlO₃, so pointing to the essential role of the transition metal ion in developing highly active catalysts. Partial dilution with Al appears to enhance the specific activity of Mn sites for methane combustion.     

Superiority of nitrate decomposition method for synthesis of K2NiF4-type LaxSr2−xMnO4 catalysts

K₂NiF₄-type La_0.2Sr_1.8MnO₄ was synthesized by nitrate (ND) and nitrate/acetate (NAD) decomposition methods as well as solid-state reaction. Single-phase oxide was obtained at 550 °C by the ND method just after the decomposition of Sr(NO₃)₂ and at 1000 °C by the NAD method after the decomposition of SrCO₃. The K₂NiF₄-type oxide was hardly formed by the solid-state reaction. In the La–Sr–Mn system, an intermediate compound of SrCO₃, if present or formed during the decomposition process, interfered with the low-temperature formation of the K₂NiF₄-type oxide because of its high decomposition temperature about 1000 °C. The ND method used only metal nitrates and no starting materials with carbon source, so that the low-temperature synthesis of the K₂NiF₄-type oxide was realized without forming obstinate intermediate compound of SrCO₃. The low-temperature synthesis was possible for La_xSr_2−xMnO₄ with the substitution of La (0 < x < 0.5) and not for La_0.2A_1.8MnO₄ (A = Ca and Ba). The effect of A-site cations on the K₂NiF₄-phase formation was discussed from the geometric aspect.     

Synthesis and properties of Bi0.5(Na1−x−yKxAgy)0.5TiO3 lead-free piezoelectric ceramics

Bi_0.5(Na_1−x−yK_xAg_y)_0.5TiO₃ piezoelectric ceramics were prepared by conventional ceramic processes. X-ray diffraction patterns show a pure perovskite structure, indicating that the K⁺ and Ag⁺ ions substitute for the Na⁺ ions in Bi_0.5Na_0.5TiO₃. The temperature dependence of the dielectric constant and dissipation factor shows all ceramics to experience two phase transitions: from ferroelectric to anti-ferroelectric and from anti-ferroelectric to paraelectric. The transition temperature from ferroelectric to anti-ferroelectric and the temperature at which the dielectric constant reaches its maximum value decrease with the increase of K⁺ amount. At room temperature, the ceramics containing 17.5–20 mol% K⁺ and 2 mol% Ag⁺ exhibit high piezoelectric constant (d₃₃ = 180 pC/N) and high electromechanical coupling factor (k_p = 35%).     

AFeO3 (A=La, Nd, Sm) and LaFe1−xMgxO3 perovskites as methane combustion and CO oxidation catalysts: structural, redox and catalytic properties

Catalytic methane combustion and CO oxidation were investigated over AFeO₃ (A=La, Nd, Sm) and LaFe_1−xMg_xO₃ (x=0.1, 0.2, 0.3, 0.4, 0.5) perovskites prepared by citrate method and calcined at 1073 K. The catalysts were characterized by X-ray diffraction (XRD). Redox properties and the content of Fe⁴⁺ were derived from temperature programmed reduction (TPR). Specific surface areas (SA) of perovskites were in 2.3–9.7 m² g⁻¹ range. XRD analysis showed that LaFeO₃, NdFeO₃, SmFeO₃ and LaFe_1−xMg_xO₃ (x·0.3) are single phase perovskite-type oxides. Traces of La₂O₃, in addition to the perovskite phase, were detected in the LaFe_1−xMg_xO₃ catalysts with x=0.4 and 0.5. TPR gave evidence of the presence in AFeO₃ of a very small fraction of Fe⁴⁺ which reduces to Fe³⁺. The fraction of Fe⁴⁺ in the LaFe_1−xMg_xO₃ samples increased with increasing magnesium content up to x=0.2, then it remained nearly constant. Catalytic activity tests showed that all samples gave methane and CO complete conversion with 100% selectivity to CO₂ below 973 and 773 K, respectively. For the AFeO₃ materials the order of activity towards methane combustion is La>Nd>Sm, whereas the activity, per unit SA, of the LaFe_1−xMg_xO₃ catalysts decreases with the amount of Mg at least for the catalysts showing a single perovskite phase (x=0.3). Concerning the CO oxidation, the order of activity for the AFeO₃ materials is Nd>La>Sm, while the activity (per unit SA) of the LaFe_1−xMg_xO₃ catalysts decreases at high magnesium content.     

Oxygen storage capacity of La1−xBO3 perovskites (with A′ = Sr, Ce; B = Co, Mn)—relation with catalytic activity in the CH4 oxidation reaction

The aim of this work was to study the effect of cation-substitution on the reducibility of the perovskite, as well as the effect on the catalytic activity for the CH₄ oxidation reaction. Six perovskites (LaCoO₃, LaMnO₃, La_1−xSr_xMnO₃ (x = 0.2, 0.4), and La_1−xCe_xMnO₃ (x = 0.05, 0.1)) were synthesized by reactive grinding. The reducibility of the perovskite was studied by means of the oxygen storage capacity (OSC) measurement. OSC was performed at different temperatures on LaCoO₃ and LaMnO₃, in order to elucidate the different mechanisms of reduction involved at each temperature. The substituted samples showed that reduction profile is modified at high-substitution degrees; however, no differences were observed on the OSC values (amount of most active oxygen, calculated after one pulse of CO) between the pure lanthanum sample and the substituted ones.

Tested in the CH₄ oxidation reaction, the LaCoO₃ sample was found to present a little higher activity than LaMnO₃, even if the cobalt-based sample presented a smaller specific surface area. Moreover, all the substituted samples presented very slightly higher activities than the pure LaMnO₃ solid. Because of the supposed redox oxidation mechanism (Mars-Van-Krevelen), this agrees well with the OSC results obtained for the reducibility of the manganese on these samples, by which it was observed that substitution does not clearly affect the immediate reduction of the manganese.     

Catalytic wet oxidation of phenol over PtxAg1−xMnO2/CeO2 catalysts

Catalytic wet oxidation reactions of aqueous phenol over unpromoted, base- and noble-metal promoted MnO₂/CeO₂ catalysts were carried out under mild conditions (80–130°C, 0.5 MPa O₂) in a batch slurry reactor. Even though the catalyst-mediated oxidation was very effective in destroying phenol, only a moderate selectivity toward complete mineralization into CO₂ and H₂O was attained due to parallel formation of deactivating carbonaceous deposits. Promotion of the mixed-oxide catalysts with platinum and/or silver enhanced the mineralization selectivity and reduced appreciably the amount of deposits.     

Self-assembly of BixTi1−xO2 visible photocatalyst with core–shell structure and enhanced activity

Mesoporous Bi_xTi_1−xO₂ spheres with core–shell chamber were prepared by alcoholysis under solvothermal conditions. The cross-condensation between Ti–OH and Bi–OH ensured complete incorporation of Bi-dopants into TiO₂ lattice, though Bi atom is much bigger than Ti. Meanwhile, the aggregation of titania building clusters into spheres and their subsequent reactions including dissolution and re-deposition processes lead to the hollow spheres with tunable interior structure. The Bi-doping induced strong spectral response in visible region owing to the formation of narrow intermediate energy band gaps. Meanwhile, multiple reflections within the sphere interior voids promoted the light absorbance. As a result, the as-prepared Bi_xTi_1−xO₂ spheres exhibited much higher activity than the undoped TiO₂, the Bi₂O₃/TiO₂ obtained by impregnating the TiO₂ with Bi(NO₃)₃ solution, and the Bi_xTi_1−xO₂ after being ground during photodegradation of p-chlorophenol under visible light irradiation. Meanwhile, the Bi_xTi_1−xO₂ could be used repetitively for 10 times owing to the high hydrothermal stability and the absence of Bi-leaching.     

Nanosized perovskite-type oxides La1−xSrxMO3−δ (M = Co, Mn; x = 0, 0.4) for the catalytic removal of ethylacetate

Nanometer perovskite-type oxides La_1−xSr_xMO_3−δ (M = Co, Mn; x = 0, 0.4) have been prepared using the citric acid complexing-hydrothermal-coupled method and characterized by means of techniques, such as X-ray diffraction (XRD), BET, high-resolution scanning electron microscopy (HRSEM), X-ray photoelectron spectroscopy (XPS), temperature-programmed desorption (TPD), and temperature-programmed reduction (TPR). The catalytic performance of these nanoperovskites in the combustion of ethylacetate (EA) has also been evaluated. The XRD results indicate that all the samples possessed single-phase rhombohedral crystal structures. The surface areas of these nanomaterials ranged from 20 to 33 m² g⁻¹, the achievement of such high surface areas are due to the uniform morphology with the typical particle size of 40–80 nm (as can be clearly seen in their HRSEM images) that were derived with the citric acid complexing-hydrothermally coupled strategy. The XPS results demonstrate the presence of Mn⁴⁺ and Mn³⁺ in La_1−xSr_xMnO_3−δ and Co³⁺ and Co²⁺ in La_1−xSr_xCoO_3−δ, Sr substitution induced the rises in Mn⁴⁺ and Co³⁺ concentrations; adsorbed oxygen species (O⁻, O₂⁻, or O₂²⁻) were detected on the catalyst surfaces. The O₂-TPD profiles indicate that Sr doping increased desorption of the adsorbed oxygen and lattice oxygen species at low temperatures. The H₂-TPR results reveal that the nanoperovskite catalysts could be reduced at much lower temperatures (<240 °C) after Sr doping. It is observed that under the conditions of EA concentration = 1000 ppm, EA/oxygen molar ratio = 1/400, and space velocity = 20,000 h⁻¹, the catalytic activity (as reflected by the temperature (T_100%) for EA complete conversion) increased in the order of LaCoO_2.91 (T_100% = 230 °C) ≈ LaMnO_3.12 (T_100% = 235 °C) < La_0.6Sr_0.4MnO_3.02 (T_100% = 190 °C) < La_0.6Sr_0.4CoO_2.78 (T_100% = 175 °C); furthermore, there were no formation of partially oxidized by-products over these catalysts. Based on the above results, we conclude that the excellent catalytic performance is associated with the high surface areas, good redox properties (derived from higher Mn⁴⁺/Mn³⁺ and Co³⁺/Co²⁺ ratios), and rich lattice defects of the nanostructured La_1−xSr_xMO_3−δ materials.     

Layered NdBaCo2−xNixO5+δ perovskite oxides as cathodes for intermediate temperature solid oxide fuel cells

The effect of Ni substitution on the crystal chemistry, thermal and electrochemical properties, and catalytic activity for oxygen reduction reaction of the layered NdBaCo_2−xNi_xO_5+δ perovskite oxides has been investigated for 0 ≤ x ≤ 0.6. The oxygen content (5 + δ) and oxidation state of the (Co, Ni) ions in the air-synthesized NdBaCo_2−xNi_xO_5+δ samples decrease with increasing Ni content, accompanied by a structural transition from tetragonal (0 ≤ x ≤ 0.4) to orthorhombic (x = 0.6). Similarly, the thermal expansion coefficient (TEC) and electrical conductivity also decrease with increasing Ni content. The x = 0.2 and 0.4 samples exhibit slightly improved performance as cathodes in single cell solid oxide fuel cell (SOFC) compared to the x = 0 sample, which is in accordance with the ac-impedance data. Among the samples studied, the x = 0.4 sample exhibits a combination of low thermal expansion and high catalytic activity for the oxygen reduction reaction in SOFC.     

Crystalline structure and electrical properties of YCuxMn1–xO3 solid solutions

Solid solutions belonging to the Mn-rich region of the YCu_xMn_1–xO₃ system have been studied. The powders were prepared by solid-state reaction between the corresponding oxides. Sintered ceramics were obtained by firing at 1100–1325 °C. The incorporation of 30 at.% Cu to the yttrium manganite induces the formation of a perovskite-type phase, with orthorhombic symmetry. Increase of the Cu amount do not appreciably affects the orthorhombicity factor b/a, up to an amount of 50 at.% Cu. Above this Cu amount, a multiphase system has been observed, with the presence of unreacted-Y₂O₃, YMnO₃ and Y₂Cu₂O₅, along with a perovskite phase. DC electrical conductivity measurements have shown a semiconducting behaviour for all the solid solutions with perovskite-type structure. The room temperature conductivity increases with Cu until 33 at.% Cu, and then decreases. Thermally activated small polaron hopping mechanism, between Mn³⁺ and Mn⁴⁺ cations, controls the conductivity in these ceramics. Results are discussed as a function of the Mn³⁺/Mn⁴⁺ ratio for each composition.